Enzymatic detection of As(III) in aqueous solution using alginate immobilized pumpkin urease: Optimization of process variables by response surface methodology

Urease immobilized on alginate was utilized to detect and quantify As³⁺ in aqueous solution. Urease from the seeds of pumpkin (vegetable waste) was purified to apparent homogeneity by heat treatment and gel filtration (Sephadex G-200). Further enzyme was entrapped in 3.5% alginate beads. Urea hydrolysis by enzyme revealed a clear dependence on the concentration and interaction time of As³⁺. The process variables effecting the quantitation of As³⁺ was investigated using central composite design with Minitab^® 15 software. The predicted results were found in good agreement (R² = 96.71%) with experimental results indicating the applicability of proposed model. The multiple regression analysis and ANOVA showed that enzyme activity decreased with increase of As³⁺ concentration and interaction time. 3D plot and contour plot between As³⁺ concentration and interaction time was helpful to predict residual activity of enzyme for a particular As³⁺ at a particular time.     

Response surface design for the optimization of enzymatic detection of mercury in aqueous solution using immobilized urease from vegetable waste

Soluble and alginate immobilized urease was utilized for detection and quantitation of mercury in aqueous samples. Urease from the seeds of pumpkin, being a vegetable waste, was extracted and purified to apparent homogeneity (sp. activity 353 U/mg protein; A₂₈₀/A₂₆₀ = 1.12) by heat treatment at 48 ± 0.1 °C and gel filtration through Sephadex G-200. Homogeneous enzyme preparation was immobilized in 3.5% alginate leading to 86% immobilization, no leaching of enzyme was found over a period of 15 days at 4 °C. Urease catalyzed urea hydrolysis by soluble and immobilized enzyme revealed a clear dependence on the concentration of Hg²⁺. Inhibition caused by Hg²⁺ was non-competitive (K_i = 1.2 × 10⁻¹ μM for soluble and 1.46 × 10⁻¹ μM for alginate immobilized urease.). Time-dependent inhibition both in presence and in absence of Hg²⁺ ion revealed a biphasic inhibition in activity. For optimization of this process response surface methodology (RSM) was utilized where two-level-two-full factorial (2²) central composite design (CCD) has been employed. The regression equation and analysis of variance (ANOVA) were obtained using MINITAB^® 15 software. Predicted values thus obtained were closed to experimental value indicating suitability of the model. 3D response surface plot, iso-response contour plot and process optimization curve were helpful to predict the results by performing only limited set of experiments.     

Enzymatic detection of heavy metal ions in aqueous solution from vegetable wastes by immobilizing pumpkin (<Emphasis Type="Italic">Cucumis melo</Emphasis>) urease in calcium alginate beads

Enzyme urease is extracted from the discarded seeds of pumpkin. Urease was purified to apparent homogeneity (5.2 fold) by heat treatment at 48 ± 1°C and gel filtration through Sephadex G-200. Effect of model metal ions on the activity of the homogeneous enzyme preparation (sp. activity 353 U/mg protein, A₂₈₀/A₂₆₀ = 1.12) of soluble as well as immobilized enzyme was investigated. The soluble and immobilized urease has been used for the quantitative estimation of general water pollution with heavy metal ions like Hg²⁺, Cu²⁺, Cd²⁺, and Co²⁺. The measurements of the urease residual activity have been carried out in tris-acetate buffer after pre-incubation of model metal salt. The inhibition was found to be biphasic with an initial rapid loss of activity and remainder in slow phase of 10∼15 min. The immobilization was done in 3.5% alginate beads leading to 86% of entrapment. There was no leaching of the enzyme over a period of 15 days at 4°C. The beads were fairly stable up to 50°C and exhibited activity even at −10°C. The inhibition by these ions was non-competitive and irreversible, hence could not be restored by dialysis. Based on the values of inhibition constant Ki the heavy-metal ions were found to inhibit urease in the following order Hg²⁺ > Cu²⁺ > Cd²⁺ > Co²⁺.     

Partial purification and some properties of urease from the alkaliphilic cyanobacteriumNostoc calcicola

Urease extracted from an alkaliphilic diazotrophic cyanobacteriumNostoc calcicola was partially purified and some of its properties were studied. Urease purified 39-fold from the crude enzyme extract showed its optimum activity at pH 7.5 and at 40°C with aK _m value of 120 μmol/L. The enzyme was found to be sensitive to metal cations, particularly Hg²⁺, Ag⁺ and Cu²⁺. 4-Hydroxymercuribenzoate (a mercapto-group inhibitor) and acetohydroxamic acid (a chelating agent of nickel) inhibited, the enzyme activity completely. These results suggest the involvement of an SH-group and Ni²⁺ in the activity of urease fromN. calcicola.     

Covalent immobilization of acetylcholinesterase on a novel polyacrylic acid‐based nanofiber membrane

In this study, polyacrylic acid‐based nanofiber (NF) membrane was prepared via electrospinning method. Acetylcholinesterase (AChE) from Electrophorus electricus was covalently immobilized onto polyacrylic acid‐based NF membrane by demonstrating efficient enzyme immobilization, and immobilization capacity of polymer membranes was found to be 0.4 mg/g. The novel NF membrane was synthesized via thermally activated surface reconstruction, and activation with carbonyldiimidazole upon electrospinning. The morphology of the polyacrylic acid‐based membrane was investigated by scanning electron microscopy, Fourier Transform Infrared Spectroscopy, and thermogravimetric analysis. The effect of temperature and pH on enzyme activity was investigated and maxima activities for free and immobilized enzyme were observed at 30 and 35°C, and pH 7.4 and 8.0, respectively. The effect of 1 mM Mn²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Mg²⁺, Ca²⁺ ions on the stability of the immobilized AChE was also investigated. According to the Michaelis–Menten plot, AChE possessed a lower affinity to acetylthiocholine iodide after immobilization, and the Michaelis–Menten constant of immobilized and free AChE were found to be 0.5008 and 0.4733 mM, respectively. The immobilized AChE demonstrated satisfactory reusability, and even after 10 consecutive activity assay runs, AChE maintained ca. 87% of its initial activity. Free enzyme lost its activity completely within 60 days, while the immobilized enzyme retained approximately 70% of the initial activity under the same storage time. The favorable reusability of immobilized AChE enables the support to be employable to develop the AChE‐based biosensors.     

Evaluation of a silica-coated magnetic nanoparticle for the immobilization of a His-tagged lipase

Magnetic particles of size 10 nm have been coated with silica to a mean diameter of 40 nm and charged with Cu²⁺ ions via a multidentate ligand, iminodiacetic acid (IDA), for the immobilization of His-tagged Bacillus stearothermopilus L1 lipase. Microporous (average pore diameter of 60 Å) silica gel with a mean particle diameter of 115 µm has been used as a comparative support material. The molar ratio of Cu²⁺ to IDA was found to be 1:1.14 and 1:1.99 in the silica gel and the silica-coated magnetic nanoparticles (SiMNs), respectively. The specific activity of the immobilized enzyme was found to conform to the following order: Cu²⁺-charged SiMN>SiMN>Cu²⁺-charged silica gel>silica gel. When it was immobilized on the Cu²⁺-charged SiMNs, over 70% of the initial activity of the lipase remained after it had been reused five times. However, only 20% of the initial activity remained after the enzyme immobilized on the Cu²⁺-charged silica gel had been reused five times. For the enzyme immobilized on supports without Cu²⁺ cations, all activity was lost after threefold reuse. The differences in the specific activities and the efficiencies of reuse of the enzymes immobilized on the various support materials are discussed in terms of immobilization mechanisms (physical adsorption vs. coordination bonding), mass transfer of a substrate and a product of the enzyme reaction, and the status of the Cu (Cu bound to the IDA on the silica layer vs. Cu directly adsorbed on the silica layer).     

Reversible immobilization of invertase on Cu-chelated polyvinylimidazole-grafted iron oxide nanoparticles

Polyvinylimidazole (PVI)-grafted iron oxide nanoparticles (PVIgMNP) were prepared by grafting of telomere of PVI on the iron oxide nanoparticles. Different metal ions (Cu²⁺, Zn²⁺, Cr²⁺, Ni²⁺) ions were chelated on polyvinylimidazole-grafted iron oxide nanoparticles, and then the metal-chelated magnetic particles were used in the adsorption of invertase. The maximum invertase immobilization capacity of the PVIgMNP–Cu²⁺ beads was observed to be 142.856 mg/g (invertase/PVIgMNP) at pH 5.0. The values of the maximum reaction rate (V _max) and Michaelis–Menten constant (Km) were determined for the free and immobilized enzymes. The enzyme adsorption–desorption studies, pH effect on the adsorption efficiency, affinity of different metal ions, the kinetic parameters and storage stability of free and immobilized enzymes were evaluated.     

Electron paramagnetic resonance evidence of metal-ion binding sites in Micrococcus lysodeikticus (M. luteus) F1-ATPase

Evidence is presented for the presence of divalent cation binding sites in purified F₁-ATPase from Micrococcus lysodeikticus (Micrococcus luteus). Electron paramagnetic resonance studies of native F₁-ATPase indicate that the enzyme binds Mn²⁺ and Cu²⁺. Scatchard-type plot for Mn²⁺ binding to the enzyme indicates the presence of 3–4 independent and identical sites with a dissociation constant of 18.3 · 10⁻⁶ M. Cu²⁺ binds to the enzyme at only one kind of site(s). This Cu²⁺ binding site(s) is characterized by a moderately ionic ligand field provided by the protein and by a tetragonal symmetry of nitrogen and/or oxigen ligands. Competition studies indicate that Mg²⁺ binds at these Mn²⁺ and Cu²⁺ binding sites.     

Immobilized rhodanese: Some aspects of anion inhibition kinetics and modulation by cations

The rat liver rhodanese (thiosulphate: cyanide sulfurtransferase EC 2.6.1.1) has been immobilized on polyacrylamide gels. The immobilized enzyme had a pH optimum of 7.4 and Km values of 3.25 mM and 1.12 mM for S₂O^2?₃ and KCN, respectively. The enzyme was competitively inhibited by NaNO₂ and CH₃COONa and noncompetitively by amyl-nitrite. A modulation of activity was observed in the presence of Ca²⁺, Zn²⁺, and Cu²⁺. The results are discussed in line with the detoxicating function of liver rhodanese.     

Factorial design for the optimization of enzymatic detection of cadmium in aqueous solution using immobilized urease from vegetable waste

Free as well as alginate immobilized urease was utilized for detection and quantitation of cadmium (Cd2+) in aqueous samples. Urease from the seeds of pumpkin (Cucumis melo), being a vegetable waste, was extracted and purified to apparent homogeneity (Sp. Activity 353 U/mg protein; A280/A260=1.12) by heat treatment at 48+/-0.1 degrees C and gel filtration through Sephadex G-200. The homogeneous enzyme preparation was immobilized in 3.5% alginate leading to 86% immobilization and no leaching of the enzyme was found over a period of 15 days at 4 degrees C. Urease catalyzed urea hydrolysis by both soluble and immobilized enzyme revealed a clear dependence on the concentration of Cd2+. The inhibition caused by Cd2+ was non-competitive (Ki=1.41 x 10(-5) M). The time dependent inhibition both in the presence and in absence of Cd2+ ion revealed a biphasic inhibition in the activity. A Response Surface Methodology (RSM) for the parametric optimization of this process was performed using two-level-two-full factorial (2(2)), central composite design (CCD). The regression coefficient, regression equation and analysis of variance (ANOVA) was obtained using MINITAB 15 software. The predicted values thus obtained were closed to the experimental value indicating suitability of the model. In addition to this 3D response surface plot and isoresponse contour plot were helpful to predict the results by performing only limited set of experiments.     

IMMOBILIZATION OF CARBONIC ANHYDRASE ENZYME PURIFIED FROM Bacillus subtilis VSG-4 AND ITS APPLICATION AS CO2 SEQUESTERER

The purification, immobilization, and characterization of carbonic anhydrase (CA) secreted by Bacillus subtilis VSG-4 isolated from tropical soil have been investigated in this work. Carbonic anhydrase was purified using ammonium sulfate precipitation, Sephadex-G-75 column chromatography, and DEAE-cellulose chromatography, achieving a 24.6-fold purification. The apparent molecular mass of purified CA obtained by SDS-PAGE was found to be 37 kD. The purified CA was entrapped within a chitosan–alginate polyelectrolyte complex (C-A PEC) hydrogel for potential use as an immobilized enzyme. The optimum pH and temperature for both free and immobilized enzymes were 8.2 and 37°C, respectively. The immobilized enzyme had a much higher storage stability than the free enzyme. Certain metal ions, namely, Co²⁺, Cu²⁺, and Fe³⁺, increased the enzyme activity, whereas CA activity was inhibited by Pb²⁺, Hg²⁺, ethylenediamine tetraacetic acid (EDTA), 5,5′-dithiobis-(2-nitrobenzoic acid (DTNB), and acetazolamide. Free and immobilized CAs were tested further for the targeted application of the carbonation reaction to convert CO₂ to CaCO₃. The maximum CO₂ sequestration potential was achieved with immobilized CA (480 mg CaCO₃/mg protein). These properties suggest that immobilized VSG-4 carbonic anhydrase has the potential to be used for biomimetic CO₂ sequestration.     

Inhibition of Urease from Seeds of Water-melon (Citrullus vulgaris) by Heavy Metal Ions

Urease from the seeds of water melon was found to be inhibited by heavy metal ions like copper, lead, nickel and cobalt. The order of effectiveness of these metals as inhibitors was Cu²⁺ > Pb²⁺ > Ni²⁺ > Co²⁺. The inhibition by these ions was noncompetitive. Time — dependent interaction of urease with nickel and cobalt exhibited a biphasic inhibition behaviour in which approximately half of the initial activity was lost rapidly (within 2 min) and remainder in a slow phase. The inhibition was largely irreversible, hence could not be reversed by dialysis. These observations are suggestive of half-and-half distribution of — SH groups on the native enzyme resulting urease into asymmetric oligomeric molecule.     

Purification, Immobilization, and Some Properties of Glucose Isomerase from Streptomyces flavogriseus

Glucose isomerase (EC 5.3.1.5) produced from Streptomyces flavogriseus was purified by fractionation with (NH₄)₂SO₄ and chromatography on diethylaminoethyl (DEAE)-cellulose and DEAE-Sephadex A-50 columns. The purified enzyme was homogeneous as shown by ultracentrifugation and sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Benzyl DEAE-cellulose, triethylaminoethyl-cellulose, and DEAE-cellulose were effective in the immobilization of partially purified glucose isomerase. Several differences in properties were found between purified soluble enzyme, immobilized enzyme (DEAE-cellulose-glucose isomerase), and heat-treated whole cells. Glucose and xylose served as substrate for the enzyme. Whole cells had the highest K_m values for glucose and xylose; the soluble enzyme had the lowest values. The optimum temperature for activity of the soluble and immobilized enzymes was 70°C; that for whole cells was 75°C. The pH optimum for the three enzyme preparations was 7.5. Magnesium ion or Co²⁺ was required for enzyme activity; an addition effect resulted from the presence of both Mg²⁺ and Co²⁺. The enzyme activity was inhibited by Hg²⁺, Ag⁺, or Cu²⁺. The conversion ratio of the enzyme for isomerization was about 50%. The soluble and immobilized enzymes showed a greater heat stability than whole cells. The soluble enzyme was stable over a slightly wider pH (5.0 to 9.0) range than the immobilized enzyme and whole cells (pH 5.5 to 9.0). The molecular weight of the enzyme determined by the sedimentation equilibrium method was 171,000. A tetrameric structure for the enzyme was also indicated. After operating at 70°C for 5 days, the remaining enzyme activity of the immobilized enzyme and whole cells, which were used for the continuous isomerization of glucose in a plug-flow type of column in the presence of Mg²⁺ and Co²⁺, was 75 and 55%, respectively. Elimination of Co²⁺ decreased operational stability.     

Catalytic properties of the immobilized Talaromyces thermophilus β-xylosidase and its use for xylose and xylooligosaccharides production

The present study explores the efficiency of Talaromyces thermophilus β-xylosidase, in the production of xylose and xylooligosaccharides. The β-xylosidase was immobilized by different methods namely ionic binding, entrapment and covalent coupling and using various carriers. Chitosan, pre-treated with glutaraldehyde, was selected as the best support material for β-xylosidase immobilization; it gave the highest immobilization and activity yields (94%, 87%, respectively) of initial activity, and also provided the highest stability, retaining 94% of its initial activity even after being recycled 25 times. Shifts in the optimal temperature and pH were observed for the immobilized β-xylosidase when compared to the free enzyme. The maximal activity obtained for the immobilized enzyme was achieved at pH 8.0 and 53 °C, whereas that for the free enzyme was obtained at pH 7.0 and 50 °C. The immobilized enzyme was more thermostable than the free β-xylosidase. We observed an increase of the K_m values of the free enzyme from 2.37 to 3.42 mM at the immobilized state. Native and immobilized β-xylosidase were found to be stimulated by Ca²⁺, Mn²⁺ and Co²⁺ and to be inhibited by Zn²⁺, Cu²⁺, Hg²⁺, Fe²⁺, EDTA and SDS. Immobilized enzyme was found to catalyze the reverse hydrolysis reaction, forming xylooligosaccharides in the presence of a high concentration of xylose. In order to examine the synergistic action of xylanase and β-xylosidase of T. thermophilus, these two enzymes were co-immobilized on chitosan. A continuous hydrolysis of 3% Oat spelt xylan at 50 °C was performed and better hydrolysis yields and higher amount of xylose was obtained.     

高分子络合树酯固定化多酚氧化酶的研究

为探索新的固定化酶方法,以漆酚-酪氨酸树酯为固定化酶载体,与Cu²⁺络合制备成高分子络合剂,对多酚氧化酶固定化,实验结果表明,这种固定化方法是可行的.固定化多酚氧化酶的适宜pH值为6.64和7.17,在60℃放置25 min后活力保留50.7%,以邻苯二酚为底物的米氏常数为1.49×10^－2 mol/L,较游离酶略小.根据实验结果提出了固定化酶模型.     

重组人Fab金属螯合层析法纯化条件的研究

在重组人Fab(rh Fab)表达载体的羧基端插入六个组氨酸, 使其对金属螯合层析介质产生特异性吸附, 可用金属螯合亲和层析法进行分离纯化. 采用自制金属(铜、锌金属离子)螯合层析介质, 以pH和咪唑两种洗脱方法,对rh Fab段的纯化效果进行了探讨. 结果显示: 铜离子螯合层析介质比锌离子螯合层析介质对rh Fab的亲和能力更强; pH洗脱方法的重复性优于咪唑法; 金属铜离子螯合层析法对rh Fab进行一步纯化可得到纯度大于95%的rh Fab产品.     

Structural and biochemical properties of lichenase from <Emphasis Type="Italic">Clostridium thermocellum</Emphasis>

The recombinant enzyme lichenase of size 30 kDa was over-expressed using E. coli cells and purified by immobilized metal ion affinity chromatography (IMAC) and size exclusion chromatography. The enzyme displayed high activity towards lichenan and β-glucan. The enzyme showed no activity towards carboxymethyl cellulose, laminarin, galactomannan or glucomannan. Surprisingly, affinity-gel electrophoresis on native-PAGE showed that the enzyme binds only glucomannan and not lichenan or β-glucan or other manno-configured substrates. The enzyme was thermally stable between the temperatures 60°C and 70°C. Presence of Cu²⁺ ions at a concentration of 5 mM enhanced enzyme activity by 10% but higher concentrations of Cu²⁺ (>25 mM) showed a sharp fall in the enzyme activity. Heavy metal ions Ni²⁺, Co²⁺ and Zn²⁺ did not affect the activity of the enzyme at low concentrations (0–10 mM) but at higher concentrations (>10 mM), caused a decrease in the enzyme activity. The crystals of lichenase were produced and the 3-dimensional structure of native form of enzyme was previously solved at 1.50 Å. Lichenase displayed (β/α)₈-fold a common fold among many glycoside hydrolase families. A cleft was identified that represented the probable location of active site.     

Copper removal by immobilized Microcystis aeruginosa in continuous flow columns at different bed heights: study of the adsorption/desorption cycle

Microcystis aeruginosa immobilized in a natural polymer was tested for its potential to remove Cu²⁺ ions from aqueous solution in a continuous, downflow packed columnar reactor. Various parameters like flow rate, bed height and contact time required for maximum removal of test metals by the immobilized Microcystis aeruginosa were optimized. An increase in bed height from 2 to 10 cm resulted in an apparent decrease in biosorption capacity from 8.94 to 5.34 mg g^–1, but more Cu²⁺ solution was purified at the higher bed height. Efficiency of metal recovery from Cu²⁺-loaded biomass and its subsequent regeneration was also determined. Immobilized M. aeruginosa was found to be effective in Cu²⁺ removal from solution for up to 10 cycles of adsorption–desorption and 1 M HCl is very efficient desorbent for regeneration of Microcystis biomass for reuse.     

Efficient proteolysis using a regenerable metal-ion chelate immobilized enzyme reactor supported on organic-inorganic hybrid silica monolith

A metal‐ion chelate immobilized enzyme reactor (IMER) supported on organic–inorganic hybrid silica monolith was developed for rapid digestion of proteins. The monolithic support was in situ prepared in a fused silica capillary via the polycondensation between tetraethoxysilane hydrolytic sol and iminodiacetic acid conjugated glycidoxypropyltrimethoxysilane. After activated by Cu²⁺, trypsin was immobilized onto the monolithic support via metal chelation. Proteolytic capability of such an IMER was evaluated by the digestion of myoglobin and BSA, and the digests were further analyzed by microflow reversed‐phase liquid chromatography with ESI‐MS/MS. Similar sequence coverages of myoglobin and BSA were obtained by IMER, in comparison to those obtained by in‐solution digestion (91 versus 92% for 200 ng myoglobin, and 26 versus 26% for 200 ng BSA). However, the digestion time was shortened from 12 h to 50 s. When the enzymatic activity was decreased after seven runs, the IMER could be easily regenerated by removing Cu²⁺ via EDTA followed by trypsin immobilization with fresh Cu²⁺ introduced, yielding the equal sequence coverage (26% for 200 ng BSA). For ～5 μg rat liver extract, even more proteins were identified with the immobilized trypsin digestion within 150 s in comparison to the in‐solution digestion for 24 h (541 versus 483), demonstrating that the IMER could be a promising tool for efficient and high‐throughput proteome profiling.     

Purification and properties of indole 2,3-dioxygenase from maize leaves

An indole 2,3-dioxygenase was purified ca 38-fold from maize leaves. The enzyme had an MW of about 98000, an optimum pH of 5.0 and the energy of activation was 9.1 kcal/mol. The K_max for indole was 1.4 × 10^?4 M. The enzyme was inhibited by diethyldithiocarbamate, salicylaldoxime and sodium dithionite. The inhibition by diethyldithiocarbamate was specifically reversed by Cu²⁺. The dialysed enzyme was stimulated by Cu²⁺. Four atoms of oxygen were utilized in the disappearance of 1 mole of indole. Inhibition of the enzyme by -SH compounds and -SH group inhibitors, and their partial removal by Cu²⁺ only, suggested the involvement of -SH groups in binding of Cu²⁺ at the catalytic site.