产碱性木聚糖酶菌株的筛选及酶学性质

从青海盐碱湖土壤中筛选到25株产碱性木聚糖酶的菌株, 其中编号为QH14的菌株产酶量达648.79 U/mL, 纯化后比活可达1148.56 U/mg。16 SrDNA鉴定表明菌株QH14属于短小芽孢杆菌, 命名为Bacillus sp. QH14。从该菌株的基因组中克隆获得了碱性木聚糖酶编码基因XynQH14, 并在大肠杆菌E.coliBL21(DE3)中获得重组表达。通过Ni-NTA亲和层析分离纯化后的重组QH14木聚糖酶比活达700.47 U/mg。该碱性木聚糖酶的酶促反应最适温度为60℃, 最适pH为9.2; 55℃处理1h仍保持50%的活力; 在pH7.0~11条件下37℃处理酶液24 h后均保持80%以上的活力, 且在pH11缓冲溶液中50℃处理24 h仍保持31.02%的酶活, 显示了该碱性木聚糖酶较好的热稳定性和碱稳定, 提示该碱性木聚糖酶在制浆造纸、纺织等行业的应用潜力。     

碱性木聚糖酶产生菌的筛选、XynG1-3基因克隆表达及酶学性质研究

从造纸厂周边碱性土壤中分离、筛选到一株产碱性木聚糖酶的细菌G1-3,根据形态和生理、生化特性并结合16SrDNA序列分析,鉴定菌株G1-3为短小芽孢杆菌,命名为Bacillus pumilus G1-3.利用克隆表达载体pET-22b(+),实现了Bacillus pumilus G1-3碱性木聚糖酶基因XynG1-3在E.coli BL21中的表达.经氨基酸序列分析,木聚糖酶XynGl-3属于GH11家族的小分子木聚糖酶.重组木聚糖酶XynG1-3经镍离子亲和层析一步纯化后,获得凝胶电泳条带单一的蛋白样品,经SDS-PAGE检测其分子量为24 kD.对酶学性质进行分析,重组酶XynG1-3最适作用温度为55℃,最适作用pH为8.0;该酶在60℃保温1h,残余酶活保持为原来的56％,pH作用范围较广,在pH10.0下保存1h,残余酶活仍能保持75％,为耐碱性木聚糖酶.     

木聚糖酶和甘露聚糖酶在毕赤酵母中的共表达及产酶分析

木聚糖酶和甘露聚糖酶是两种重要的半纤维素酶,也是两种重要的饲用酶制剂,通过毕赤酵母表达系统中的体外串联表达盒构建多拷贝的方法构建了木聚糖酶DSB和甘露聚糖酶Man A共表达重组质粒p PICZαA/DSB-ManA,将该重组质粒电转化至宿主菌毕赤酵母X33中获得共表达两种酶的重组菌X33/DSB-ManA,实现了两种酶的共分泌表达,经诱导表达后木聚糖酶和甘露聚糖酶的酶活分别为273. 6 U/ml和256. 8 U/ml,为单独表达重组菌X33/DSB和X33/Man A酶活的30. 4%和73. 4%。酶学性质的分析显示DSB和Man A的最适反应温度均为75℃,在45℃～75℃范围内具有较好的温度稳定性,酶活可保持最高酶活的60%以上; DSB最适pH为6. 5,Man A最适pH为6. 0,在pH 3. 0、40℃条件下,Man A处理1h能保持最高酶活的80%以上,DSB处理1 h时能保持最高酶活的50%以上; DSB和Man A对多种金属离子和化学试剂(浓度为1 mM)具有较好的耐受性,均可保留60%以上的酶活力。通过单一菌株成功完成了不同酶的共表达,为复合酶饲料添加剂的生产和应用研究提供了一定的理论依据。     

CALA在毕赤酵母中的表达、纯化及酶学特性研究

将南极假丝酵母脂肪酶A(cala)基因克隆至组成型表达载体pGAPZαA中,电激转入X-33,获得高效表达的CALA酵母工程菌株.发酵液上清经超滤浓缩、硫酸铵沉淀和阴离子交换层析等步骤,获得纯化的重组CALA,其比酶活达384.90 U/mg.该酶最适温度为70℃,最适pH值为8.0.经50℃保温2 h,仍含有60%水解酶活力;在pH7.0和8.0溶液中比较稳定.经DMSO处理1 h,仍保持90%的活性;非离子型表面活性剂能提高CALA的酶活,金属离子在不同程度上抑制CALA的酶活.     

中国新分离碱性耐热芽孢杆菌的木聚糖酶产酶特征

目的：检测由中国新分离碱性耐热芽孢杆菌[1]产生的粗木聚糖酶的酶活。方法：通过DNS法测定粗木聚糖酶的酶活。结果：实验表明,以橡树木聚糖为底物培养的新分离菌株在30-50℃处理2h酶活不丧失。其中,XJU-1菌株在60、70和80℃时粗酶酶活分别丧失是最初酶活的1.54%、19.09%和72.59%;而XJU-80的粗酶酶活分别是3.59%、26.43%和72.59%。两个菌株产生的粗木聚糖酶的最适pH是7.5-8.0。将该粗酶在pH 7.0-9.0（50℃）处理24h后,酶活几乎均降低最初酶活的18%。结论：由XJU-1和XJU-80产生的木聚糖酶是生化领域有用的嗜碱耐热酶。     

耐碱性木聚糖酶产酶菌株的选育

目的:筛选出产碱性木聚糖酶酶活力高的菌株。方法:从碱性环境中采集样品,以自制木聚糖为惟一利碳源,采用刚果红透明圈法于摇瓶发酵法相结合筛选出18株产木聚糖酶酶活较高的菌株,其中1株酶活最高可达335.14 IU/ml。结果:通过培养特性及形态特征初步鉴定为芽孢杆菌。对部分酶学性质研究的结果表明:其作用最适温度60℃,最适pH8.0,在pH9.0条件下仍具有80%酶活力。结论:属于耐碱性木聚糖酶,具有很好的工业应用前景。     

木聚糖酶产生菌的筛选与酶学生化特性

从自然界中筛选出可分泌高产木聚糖酶的黑曲霉,并对其产酶条件和酶学特性进行优化和分析.结果表明:该菌株培养48 h后,所产的木聚糖酶比酶活最高,达到1645.66 U/g;通过培养基的优化,其比酶活达到了2 698.28 U/g.最优培养基组成(质量分数):麸皮75.0％、玉米12.5％、豆粕12.5％.该酶的最适温度为37℃,最适pH为4.5.     

绵毛嗜热丝孢菌木聚糖酶的纯化与性质

研究了绵毛嗜热丝孢菌Thermomyces lanuginosus W205胞外木聚糖酶的纯化与性质。粗酶液经硫酸铵沉淀和Q-Sepharose FF离子交换层析即可得到电泳纯木聚糖酶,回收率为46.6%,比酶活为1396.9U/mg。该酶的最适pH和最适温度分别为pH7.0和75℃,pH稳定范围为5.5-10.8,70℃处理30min残存酶活在70%以上。薄层层析结果显示该酶水解桦木木聚糖的主要产物是木二糖和木三糖,并且能够通过转糖苷作用将木三糖转化为木二糖。该木聚糖酶易于纯化并且具有较宽的pH稳定性及良好的热稳定性,具有较大的潜在工业应用价值。     

四株冰川雪细菌产酶能力的初步研究

目的:从青藏高原冰川雪中筛选出一菌多酶的菌株.方法:对恢复出的4个细菌,通过平板透明法研究其产淀粉酶、脂肪酶和蛋白酶的特性.结果:LHG-C-9为惟一可以产淀粉酶的菌株,所产脂肪酶活性最高.4个菌株均不产蛋白酶.结论:LHG-C-9最适生长温度为15℃,属于耐冷菌.对该菌所产淀粉酶和脂肪酶的性质进行了初步研究,其随产淀粉酶的最适作用温度为50℃;最佳产酶pH值为7.0,该pH值所产酶活为83.9U/mL;在60℃的高温下温浴10min后酶活为0%.该菌株所产脂肪酶的最适作用温度为20℃;最佳产酶pH值为7.0,该pH值所产酶活为9.2U/mL;50℃温浴1h后酶活力不足34%.     

黑曲霉产木聚糖酶固态发酵条件及部分酶学性质的研究

实验以棉粕和玉米秆为主要原料,采用单因素和正交实验方法对黑曲霉固态发酵产木聚糖酶的培养条件进行了优化,为了获得高酶活产品的发酵条件。结果表明,最适培养基组分为棉粕和玉米秆的比例为3∶2,固水比为1∶1.2,尿素的最适添加量为2%(以干重计),KH2PO4的最适添加量为0.2%。在此条件下,菌株产酶活性可达6 529U/g干曲。该酶的最适反应温度为55℃,最适pH为5.0,pH稳定范围较宽,在30℃、pH 3.5~6.0范围内处理100min,酶活保持在85%以上,但耐热性不是很理想,在60℃保温30min残余酶活只有17%。     

产耐热β-葡萄糖苷酶细菌的筛选与鉴定

从中国高校工业微生物资源和信息中心(CICIM-CU)菌种库的1323株细菌保藏物中筛选出20株产β-葡萄糖苷酶能力较高的细菌.通过16S rDNA序列鉴定,初步确定其中有5株为嗜热溶胞土芽孢杆菌 (Geobacillus sp.),其余为地衣芽孢杆菌 (Bacillus licheniformis).对其中编号为F1...     

Isolation, purification and characterization of xylanasefrom Staphylococcus sp. SG-13 and its application in biobleaching of kraft pulp

A haloalkalophilic Staphylococcus sp. SG-13 produced an alkalistable xylanase in wheat bran medium. A 12-fold purification was achieved by using standard purification techniques. The purified xylanase exhibited a dual pH optima of 7.5 and 9.2. The optimum temperature for enzyme activity was 50 degrees C. The enzyme was stable at 50 degrees C for more than 4 h. The xylanase exhibited Km and Vmax values of 4 mg ml-1, 90 micromol min-1 per mg for birchwood xylan and 7 mg ml-1, 55 micromol min-1 per mg for oatspelt xylan, respectively. The substrate binding affinity of xylanase was more for oatspelt xylan but birchwood xylan was hydrolysed more rapidly. The xylanase activity was stimulated by Fe2+, Ni2+, Cu2+ and dithiothreitol up to 60% and was strongly inhibited in the presence of Co2+, Hg2+, Pb2+, phenyl methane sulphonyl fluoride, ethylenediaminetetraacetic acid, and acetic anhydride up to 100%. The xylanase dose of 1.8 U g-1 moisture free pulp, exhibited bleach boosting of kraft pulps optimally at pH 9.5-10.0 and 50 degrees C after 4 h of reaction time. Pretreatment of pulp with xylanase and its subsequent treatment with 8% hypochlorite, reduced the kappa number by 30%, enhanced the brightness and viscosity by 11% and 1.8%, respectively, and improved the paper properties such as tensile strength and burst factor up to 10% and 17%, respectively.     

产木聚糖酶白地霉培养特性及部分纯化的酶学特性

本文对白地霉Ref1的培养特性、产酶条件和酶学特性进行了初步研究。结果表明:该菌为低温型菌株,其最佳生长条件为pH6、20℃和酵母膏作为氮源;最佳产酶条件为pH3-7、15℃及以酵母膏氮源;条件优化后产酶可达118.7U/mL,可溶蛋白含量可达到60μg/mL,酶溶液的比活可达到1250U/mg蛋白质;该木聚糖酶的最适反应温度和pH分别为50℃和5,金属离子Mg2+、Na+和8mmol/L的Fe2+、Cu2+、Zn2+等对木聚糖酶的活性有抑制作用,而Ca2+、4mmol/L的Fe2+、Cu2+、Zn2+和8mmol/L的Mn2+等对该酶反应则有促进作用;该木聚糖酶在保温2h后在15-40℃范围内能保持80%以上的酶活性,在50℃时能保持68%的酶活性;用lineweaver-Burk作图法(双倒数作图法)求得该酶的最大反应速度Vmax和Km值分别为163.38mmol/mg/min和0.75mg/mL。     

Rapid production of thermostable cellulase-free xylanase by a strain of Bacillus subtilis and its properties

A Bacillus subtilis strain isolated from a hot-spring was shown to produce xylanolytic enzymes. Their associative/synergistic effect was studied using a culture medium with oat spelts xylan as xylanase inducer. Optimal xylanase production of about 12 U ml⁻¹ was achieved at pH 6.0 and 50°C, within 18 h fermentation. At 50°C, xylanase productivity obtained after 11 h in shake-flasks, 96,000 U l⁻¹ h⁻¹, and in reactor, 104,000 U l⁻¹ h⁻¹ was similar. Increasing temperature to 55°C a higher productivity was obtained in the batch reactor 45,000 U l⁻¹ h⁻¹, compared to shake-flask fermentations, 12,000 U l⁻¹ h⁻¹. Optimal xylanolytic activity was reached at 60°C on phosphate buffer, at pH 6.0. The xylanase is thermostable, presenting full stability at 60°C during 3 h. Further increase in the temperature caused a correspondent decrease in the residual activity. At 90°C, 20% relative activity remains after 14 min. Under optimised fermentation conditions, no cellulolytic activity was detected on the extract. Protein disulphide reducing agents, such as DTT, enhanced xylanolytic activity about 2.5-fold. When is used xylan as substrate, xylanase production decreased as function of time in contrast, with trehalose as carbon source, xylanase production in maintained constant for at least 80 h fermentation.     

Purification of xylanase from alkaliphilic Bacillus sp. K-8 by using corn husk column

The objective of this work was to apply low cost materials, agricultural residues, to the purification of xylanase. The results showed that crude extracellular, cellulase-free xylanase of an alkaliphilic Bacillus sp. strain K-8 could be purified in a single step by affinity adsorption–desorption on a corn husk column using a high flow rate, under the conditions 25 mM acetate buffer, pH 4.0, 4 °C, which prevented the hydrolysis of xylan by xylanase. After adsorption, the xylanase was eluted from the enzyme–corn husk complex with 500 mM Urea. The enzyme was purified 5.3-fold to homogeneity from culture supernatant. The molecular weight of the purified enzyme was 24 kDa as determined by sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE). The specific activity and recovery yield after purification were 25.4 U/mg protein and 42.3%, respectively.     

Production of alkali-tolerant cellulase-free xylanase by <Emphasis Type="Italic">Pseudomonas</Emphasis> sp. WLUN024 with wheat bran as the main substrate

An alkali-tolerant cellulase-free xylanase producer, WLI-11, was screened from soil samples collected from a pulp and paper mill in China. It was subsequently identified as a Pseudomonas sp. A mutant, WLUN024, was selected by consecutive mutagenesis by u.v. irradiation and NTG treatment using Pseudomonas sp. WLI-11 as parent strain. Pseudomonas sp. WLUN024 produced xylanase when grown on xylosidic materials, such as hemicellulose, xylan, xylose, and wheat bran. Effects of various nutritional factors on xylanase production by Pseudomonas sp. WLUN024 with wheat bran as the main substrate were investigated. A batch culture of Pseudomonas sp. WLUN024 was conducted under suitable fermentation conditions, where the maximum activity of xylanase reached 1245 U ml⁻¹ after incubating at 37 °C for 24 h. Xylanase produced by Pseudomonas sp. WLUN024 was purified and the molecular weight was estimated as 25.4 kDa. Primary studies on the characteristics of the purified xylanase revealed that this xylanase was alkali-tolerant (optimum pH 7.2–8.0) and cellulase-free. In addition, the xylanase was also capable of producing high quality xylo-oligosaccharides, which indicated its application potential in not only pulp bio-bleaching processes but also in the nutraceutical industry.     

木聚糖酶生产菌株的筛选及产酶条件的优化

以甘蔗渣半纤维素为碳源,从垃圾场土壤中分离到6株分解半纤维素的菌株。通过固态发酵的木聚糖酶活力比较筛选到1株木聚糖酶活力较高的菌株。该菌株18S rDNA序列与曲霉（Aspergillus sp.）的同源性达97%,根据对菌株形态学分析和18S rDNA序列分析的结果,将该菌株鉴定为曲霉HQ3。HQ3的最佳产酶条件为：甘蔗渣:麸皮为7:3（W/W）,固液比为1:4（W/W）,尿素0.4 %,pH7.0,温度30℃,发酵产酶时间4 d。在最佳产酶条件下,其木聚糖酶活最高可达3421U/g干曲。     

Cloning and DNA sequencing of xyaA, a gene encoding an endo-beta-1,4-xylanase from an alkalophilic Bacillus strain (N137).

The gene xyaA encoding an alkaline endo-beta 1,4-xylanase from an alkalophilic Bacillus sp. strain (N137) isolated in our laboratory was cloned and expressed in Escherichia coli. The nucleotide sequence of a 1,656-bp DNA fragment containing xyaA was determined, revealing one open reading frame of 993 bp that encodes a xylanase (XyaA) of 39 kDa. This xylanase lacks a typical putative signal peptide, yet the protein is found in the Bacillus culture supernatant. In Escherichia coli, the active protein is located mainly in the periplasmic space. The xylanase activity of the cloned XyaA is an endo-acting enzyme that shows optimal activity at pH 8 and 40 degrees C. This activity is stable at a pH between 6 and 11. Incubations of XyaA at 40 degrees C for 1 h destroyed 45% of the activity.