Alginate esters via chemoselective carboxyl group modification

Alginates are (1 → 4) linked linear copolysaccharides composed of β-d-mannuronic acid (M) and its C-5 epimer, α-l-guluronic acid (G). Several strategies for synthesis of carboxyl modified alginate derivatives exist in the literature. Most of these however employ aqueous chemistries, such as carbodiimide coupling reactions. Based on our recently discovered method for homogeneous dissolution of tetrabutylammonium (TBA)-alginate, we now describe use of tetrabutylammonium fluoride (TBAF)-based two component solvent systems as media for synthesis of carboxyl-modified alginate esters. Partially and fully esterified benzyl, butyl, ethyl, and methyl alginates were synthesized via reaction with the corresponding alkyl halides. The newly synthesized derivatives were soluble in polar aprotic solvents without the addition of TBAF. Saponification was performed to demonstrate that alkylation was completely regioselective for carboxylate groups in preference to hydroxyl groups to form esters. We demonstrate the utility of these alginate esters to enhance aqueous solubility of the flavonoid naringenin by formation of solid dispersions.     

Papain-catalyzed polymerization of amino acids in low water organic solvents

Summary Polyethylene glycol-modified papain catalyzed the oligomerization of amino acid amides in toluene. The water content of the organic solvent was a critical factor determining the extent of polymerization. Under optimized conditions, lysine and phenylalanine oligomers containing up to 10 residues were obtained. In sharp contrast to what is observed in aqueous media, hydrophilic and basic amino acid derivatives resulted in higher reaction yields than hydrophobic amino acid derivatives.     

Polyelectrolyte layer interpenetration and swelling of alginate–chitosan multilayers studied by dual wavelength reflection interference contrast microscopy

Polyelectrolyte multilayers of alginate and either poly-l-lysine or chitosan have been studied with dual wavelength reflection interference contrast microscopy (DW-RICM). Alginates with different ratios of the two monomer residues, β-d-mannuronic acid (M) and -l-guluronic acid (G) were included to study possible effects of specific divalent ions selected from their ability to influence gelation of alginate. Measurements of multilayer thickness revealed the importance of the preparation conditions. The multilayer thickness was reduced with increasing ionic strength following preparation, suggesting a dominance of an ordinary screening of the alginate component. The results indicate that the interaction between alginate and chitosan are different from that between alginate and poly-l-lysine, with the latter appearing to be more of a “hit-and-stick” reaction while rearrangements during the adsorption process is occurring to a larger extent in the preparation of the chitosan–alginate multilayers.     

Environmentally Friendly Approach to the Synthesis of 3-[Benzylideneamino]-2-methylquinazolin-4(3H)-one Derivatives and Calculation of Their Toxicity

Application of deep eutectic solvents in synthesis of different heterocyclic compounds was proven very efficient. These solvents are a new generation of green solvents showing excellent potential for different purposes, where they are used as environmentally acceptable substitute for toxic and volatile organic solvents. This research describes their application in the synthesis of series of quinazolinone Schiff bases in combination with microwave, ultrasound-assisted and mechanochemical methods. First, a model reaction was performed in 20 different deep eutectic solvents to find the best solvent and then reaction conditions (solvent, temperature and reaction time) were optimized for each method. Afterwards, 40 different quinazolinone derivatives were synthesized in choline chloride/malonic acid (1 : 1) DES by each method and compared by their yields. Here we show that deep eutectic solvents can be very efficient in the synthesis of quinazolinone derivatives as an excellent substitution for volatile organic solvents. With green chemistry approach in mind, we have also performed a calculation on compounds’ toxicity and solubility, showing that most of them possess toxic and mutagenic properties with low water solubility.     

Effect of organic solvents on enantioselectivity of protease catalysis

The protease-catalyzed transesterifications between N-trifluoroacetyl-DL-phenylalanine 2,2,2-trifluoroethyl ester and 1-propanol were studied in a variety of anhydrous organic solvents at 30 degrees C. The protease preparations lyophilized from phosphate buffer solutions (pH 8.0) were used as catalysts. The organic solvent affected both rate of reaction and enantioselectivity differently. Proteases such as Aspergillus oryzae protease, subtilisin Carlsberg, and subtilisin BPN' always preferred the L-enantiomer in both hydrophilic and hydrophobic solvents, indicating no inversion of the L-specificity in hydrophobic solvents such as toluene. However, enantioselectivity was rather poor, with E (enantiomeric ratio) values not exceeding even one order of magnitude except for acetonitrile. There was a weak inverse correlation between E values of subtilisin Carlsberg and solvent hydrophobicity (logP). Acetonitrile was a preferable solvent in terms of both rate of reaction and enantioselectivity (E= 15 to 25) for processing L-amino acid derivatives in organic media. Organic solvents generally have potential advantages of processing D-amino acid derivatives. (c) 1997 John Wiley & Sons, Inc.     

Alginate as immobilization matrix and stabilizing agent in a two-phase liquid system: application in lipase-catalysed reactions.

Alginate was evaluated as an immobilization matrix for enzyme-catalyzed reactions in organic solvents. In contrast to most hydrogels, calcium alginate was found to be stable in a range of organic solvents and to retain the enzyme inside the gel matrix. In hydrophobic solvents, the alginate gel (greater than 95% water) thus provided a stable, two-phase liquid system. The lipase from Candida cylindracea, after immobilization in alginate beads, catalysed esterification and transesterification in n-hexane under both batch and continuous-flow conditions. The operational stability of the lipase was markedly enhanced by alginate entrapment. In the esterification of butanoic acid with n-butanol, better results were obtained in the typical hydrophilic calcium alginate beads than in less hydrophilic matrices. The effects of substrate concentration, matrix area, and polarity of the substrate alcohols and of the organic solvent on the esterification activity were examined. The transesterification of octyl 2-bromopropanoate with ethanol was less efficient than that of ethyl 2-bromopropanoate with octanol. By using the hydrophilic alginate gel as an immobilization matrix in combination with a mobile hydrophobic phase, a two-phase liquid system was achieved with definite advantages for a continuous, enzyme-catalysed process.     

Catalytic properties and specificity of a recombinant, overexpressed D-mannuronate lyase

Lysis of alginates and of their saturated and unsaturated fragments was monitored by 1H NMR spectroscopy. AlxM(B) alginate lyase performs beta-elimination on the mannuronic acid (M) residues. It does not cleave the guluronic acid (G) sequences, nor the M-G or the G-M diads. In consequence, it is a true mannuronate lyase. The end product of the reaction is O-(4-deoxy-alpha-L-ery-thro-hex-4-enopyranosyl-uronic acid)-(1->(4)-O-(beta-D-mannopyranosyluronic acid)-(1->4)-O-beta-D-mannpyranuronic acid. Viscosity measurements made during degradation of a polymannuronate alginate showed that AlxM(B) behaves as an endo-enzyme. HPLC analysis of the degradation products of oligomannuronates and oligoalginates suggested that the beta-elimination requires the interaction of the enzyme with at least three sequential mannuronic acid residues. The catalytic site may possess 5 sub-sites and accommodate pentamers with different M/G ratio. Kinetic measurements showed that the specificity constant Vm/Km increased with the number of mannuronic acid residues. AlxM(B) may be reversibly inhibited by heteropolymeric blocks in a competitive manner.     

The recombinant Azotobacter vinelandii mannuronan C-5-epimerase AlgE4 epimerizes alginate by a nonrandom attack mechanism

The Ca2+-dependent mannuronan C-5-epimerase AlgE4 is a representative of a family of Azotobacter vinelandii enzymes catalyzing the polymer level epimerization of beta-D-mannuronic acid (M) to alpha-L-guluronic acid (G) in the commercially important polysaccharide alginate. The reaction product of recombinantly produced AlgE4 is predominantly characterized by an alternating sequence distribution of the M and G residues (MG blocks). AlgE4 was purified after intracellular overexpression in Escherichia coli, and the activity was shown to be optimal at pH values between 6.5 and 7.0, in the presence of 1-3 mM Ca2+, and at temperatures near 37 degrees C. Sr2+ was found to substitute reasonably well for Ca2+ in activation, whereas Zn2+ strongly inhibited the activity. During epimerization of alginate, the fraction of GMG blocks increased linearly as a function of the total fraction of G residues and comparably much faster than that of MMG blocks. These experimental data could not be accounted for by a random attack mechanism, suggesting that the enzyme either slides along the alginate chain during catalysis or recognizes a pre-existing G residue as a preferred substrate in its consecutive attacks.     

Properties and action pattern of the recombinant mannuronan C-5-epimerase AlgE2

The mannuronan C-5-epimerase AlgE2 is one of a family of Ca²⁺-dependent epimerases secreted by Azotobacter vinelandii. These enzymes catalyze the conversion of β- -mannuronic acid residues (M) to - -guluronic acid residues (G) in alginate. AlgE2 has been produced by fermentation with a recombinant strain of Escherichia coli, isolated and partially purified. Epimerization with AlgE2 increased the content of G-residues in different alginates from starting values of 0–45% up to approximately 70%. The new G-residues were mainly present in short blocks. Although G-residues may be introduced next to pre-existing G-residues, AlgE2 was not able to epimerize strictly alternating MG-structures. The epimerization with AlgE2 was greatly affected by the concentration of Ca²⁺. The type of alginate used as substrate affected the reaction rate and the reaction pattern especially at low Ca²⁺ concentration. AlgE2 appears to act by a preferred attack mechanism where the enzyme associates with different sequences in the alginate depending on the concentration of Ca²⁺. During epimerization, AlgE2 occasionally causes cleavage of the alginate chain. The observed frequency corresponds to 1–3 breaks per 1,000 M-units epimerized.     

Mannuronan C-5-epimerases and their application for in vitro and in vivo design of new alginates useful in biotechnology

The industrially important polysaccharide alginate is a linear copolymer of beta-D-mannuronic acid (M) and alpha-L-guluronic acid (G). It is produced commercially by extraction from brown seaweeds, although some of the bacteria belonging to the genera Azotobacter and Pseudomonas also synthesize alginates. Alginates are synthesized as mannuronan, and varying amounts of the M residues in the polymer are then epimerized to G residues by mannuronan C-5-epimerases. The gel-forming, water-binding, and immunogenic properties of the polymer are dependent on the relative amount and sequence distribution of M and G residues. A family of seven calcium-dependent, secreted epimerases (AlgE1-7) from Azotobacter vinelandii have now been characterized, and in this paper the properties of all these enzymes are described. AlgE4 introduces alternating M and G residues into its substrate, while the remaining six enzymes introduce a mixture of continuous stretches of G residues and alternating sequences. Two of the enzymes, AlgE1 and AlgE3, are composed of two catalytically active domains, each introducing different G residue sequence patterns in alginate. These results indicate that the enzymes can be used for production of alginates with specialized properties.     

Immobilization and stabilization of a bimolecular aggregate of the lipase from Pseudomonas fluorescens by multipoint covalent attachment

The soluble lipase from Pseudomonas fluorescens (PFL) forms bimolecular aggregates in which the hydrophobic active centers of the enzyme monomers are in close contact. This bimolecular aggregate could be immobilized by multipoint covalent linkages on glyoxyl supports at pH 8.5. The monomer of PFL obtained by incubation of the soluble enzyme in the presence of detergent (0.5% TRITON X-100) could not be immobilized under these conditions. The bimolecular aggregate has two amino terminal residues in the same plane. A further incubation of the immobilized derivative under more alkaline conditions (e.g., pH 10.5) allows a further multipoint attachment of lysine (Lys) residues located in the same plane as the amino terminal residues. Monomeric PFL was immobilized at pH 10.5 in the presence of 0.5% TRITON X-100. The properties of both PFL derivatives were compared. In general, the bimolecular derivatives were more active, more selective and more stable both in water and in organic solvents than the monomolecular ones. The bimolecular derivative showed twice the activity and a much higher selectivity (100 versus 20) for the hydrolysis of R,S-2-hydroxy-4-phenylbutyric acid ethyl ester (HPBEt) in aqueous media at pH 5.0 compared to the monomeric derivative. In experiments measuring thermal inactivation at 75 °C, the bimolecular derivative was 5-fold more stable than the monomeric derivative (and 50-fold more stable than a one-point covalently immobilized PFL derivative), and it had a half-life greater than 4 h. In organic solvents (cyclohexane and tert-amyl alcohol), the bimolecular derivative was much more stable and more active than the monomeric derivative in catalyzing the transesterification of olive oil with benzyl alcohol.     

Influence of environmental conditions on the activity of the recombinant mannuronan C-5-epimerase AlgE2

The mannuronan C-5-epimerase AlgE2 is one of a family of Ca(2+)-dependent epimerases secreted by Azotobacter vinelandii. These enzymes catalyze the conversion of beta-D-mannuronic acid residues (M) to alpha-L-guluronic acid residues (G) in alginate. AlgE2 had a pH optimum between 6.5 and 7 and a temperature optimum around 55 degrees C. Addition of low molecular weight organic compounds, including buffers, amino acids and osmoprotective compounds, affected the activity of the enzyme. The charge, size and stereochemistry of the added compounds were important. The activity of AlgE2, dissolved in various buffers (same pH), decreased with increasing fraction of positively charged buffer ions. Mono- and divalent metal ions also influenced the activity. When Ca(2+) was omitted only Sr(2+), of the metal ions tested, supported some activity of AlgE2. At high concentration of Ca(2+) (3.3 mM) these ions had a negative effect on the activity, whereas at low Ca(2+) concentration (0.58 mM) the activity was enhanced by addition of Sr(2+), and to some degree also by addition of Mg(2+) and Mn(2+). During epimerization AlgE2 occasionally causes cleavage of the alginate chain. These chain breaks could not be prevented by changes in the conditions during the epimerization. The composition and sequential structure of epimerized alginate was not altered by changes in the epimerization conditions.     

Tailor-made alginate bearing galactose moieties on mannuronic residues: selective modification achieved by a chemoenzymatic strategy

1-Amino-1-deoxygalactose (12%, mole) has been chemically introduced on a mannuronan sample via an N-glycosidic bond involving the uronic group of the mannuronic acid (M) residues. The unsubstituted M residues in the modified polymer were converted into guluronic moieties (G) by the use of two C-5 epimerases, resulting in an alginate-like molecule selectively modified on M residues. The molecular details of the newly formed polymer, in terms of both composition and molecular dimensions, were disclosed by use of (1)H NMR, intrinsic viscosity, and high-performance size-exclusion chromatography-multiple-angle laser light scattering (HPSEC-MALLS). Circular dichroism has revealed that the modified alginate-like polymer obtained after epimerization was able to bind calcium due to the introduction of alternating and homopolymeric G sequences. The gel-forming ability of this M-selectively modified material was tested and compared with an alginate sample containing 14% galactose introduced on G residues. Mechanical spectroscopy pointed out that the modified epimerized material was able to form stable gels and that the kinetics of the gel formation was similar to that of the unsubstituted sample. In contrast, the G-modified alginate samples showed a slower gel formation, eventually leading to gel characterized by a reduced storage modulus. The advantage of the selective modification on M residues was confirmed by measuring the Young's modulus of gel cylinders of the different samples. Furthermore, due to the high content in alternating sequences, a marked syneresis was disclosed for the modified-epimerized sample. Finally, calcium beads obtained from selectively M-modified alginate showed a higher stability than those from the G-modified alginate, as evaluated upon treatment with nongelling ions.     

Microwave assisted rapid method for hydrolysis of sodium alginate for M/G ratio determination

A rapid one-pot method for hydrolysis of sodium alginate for determining M/G ratio has been developed under mild conditions, using microwave irradiation. Poly-mannuronic acid (PMA) and poly-guluronic acid (PGA) ratio was determined (M/G 0.38), which was similar to that (M/G 0.39) obtained by the conventional method, using sodium alginate of Sigma as reference sample for bench marking. For validation of the method PMA and PGA were characterized by density, porosity, viscosity, optical rotation measurements, ¹³C NMR, FT-IR, thermogravimetric analysis (TGA), X-ray diffraction, circular dichroism (CD), molar mass distribution (GPC) and scanning electron microscopy (SEM).     

Optimization of methyl propionate production catalysed by Mucor miehei lipase

Lipase from Mucor miehei was used to catalyse the esterification reaction between propionic acid and methyl alcohol in modified organic media. Small-scale model studies were performed in order to define the optimal conditions. The specific activity of immobilized lipase, adsorbed onto hydrophilic supports, compared to free lipase, showed that enzyme activity was altered by immobilisation. Non-polar solvents were shown to be less harmful for the biocatalyst than solvents with higher polarity. Diethyl ether was used as the cosolvent of hexane to improve the solubility of substrates in the organic phase thus increasing contact with enzyme. An optimal ratio of 90/10 (v/v) was determined for a hexane/diethyl ether mixture. The mass of enzyme preparation must be high enough to display optimal diffusion of the reagents and hydration of the catalytic sites. Increased substrate concentrations were stimulatory up to a point after which inhibition and enzyme destabilisation, in repeated runs, occurred. Water saturation of the organic medium greatly lowered the biosynthetic activity of the enzyme. It was possible to reach a 96% methyl propionate biosynthesis yield after 2.30 h reaction, underlining the free-enzyme operational capacity in a quasi-anhydrous modified organic medium.     

Isolation of water-soluble alginate from brown algae

Summary Water-soluble alginate was obtained from an aqueous extract of Kjellmaniella crassifolia by precipitation with HCl, calcium acetate or 20% ethanol in the presence of 0.05 M MgCl₂ Of these precipitation procedures, MgCl₂-ethanol gave the purest alginate preparation as judged by electrophoresis. The thin-layer and gas-liquid chromatography of its acid hydrolysate, and the IR spectra analysis of the whole alginate, suggested that the water-soluble alginate is similar to ordinary water-insoluble and alkali-soluble alginate such as Kelco alginate.However, the alginate obtained in the present work contained a great excess of mannuronic acid residues, giving an M:G ratio of about 13. Its molecular weight distribution was rather broad as with Kelco alginate, but the molecular weight of its major component was estimated to be 500 000 amu, whereas that Kelco alginate measured on the same column under the same condition was 1 700 000 amu. This suggests that water-soluble alginate was far smaller in average molecular size than Kelco alginate.     

Photolytic depolymerization of alginate

A photochemical reaction has been developed for the partial de-polymerization of sodium alginate, a polysaccharide utilized in medicine, pharmacy, basic sciences and foods. An aqueous solution of sodium alginate was photochemically depolymerized to ∼40% of its average molecular weight using ultraviolet light in the presence of titanium dioxide catalyst at pH 7 over a period of 3 h. The products were separated giving four fractions all having an average molecular weight that was smaller than that of the starting material. Characterization of the guluronate (G) and mannuronate (M) contents, and determination of the M/G ratio of photochemically depolymerized alginate, were accomplished using ¹H NMR spectroscopy. The resulting M/G ratio was compared to that obtained for alginate fractions produced by acid hydrolysis. The M and G content, of each alginate fraction, was also assigned with regards to their occurrence in G-rich, M-rich or M/G heteropolymeric domains. This new depolymerization method might also be applicable in the preparation of alginate oligosaccharides for use in the food and pharmaceutical industries.     

Simple strategy of reactivation of a partially inactivated penicillin g acylase biocatalyst in organic solvent and its impact on the synthesis of β‐lactam antibiotics

Some reactions of organic synthesis require to be performed in rather aggressive media, like organic solvents, that frequently impair enzyme operational stability to a considerable extent. We have studied the option of developing a reactivation strategy to increase biocatalyst lifespan under such conditions, under the hypothesis that organic solvent enzyme inactivation is a reversible process. Glyoxyl agarose immobilized penicillin G acylase and cross‐linked enzyme aggregates of the enzyme were considered as biocatalysts performing in dioxane medium. Reactivation strategy consisted in re‐incubation in aqueous medium of the partly inactivated biocatalysts in organic medium, best conditions of reactivation being studied with respect to dioxane concentration and level of enzyme inactivation attained prior to reactivation. Best results were obtained with glyoxyl agarose immobilized penicillin G acylase at all levels of residual activity studied, with reactivations up to 50%; for the case of a biocatalyst inactivated down to 75% of its initial activity, full recovery of enzyme activity was obtained after reactivation. The potential of this strategy was evaluated in the thermodynamically controlled synthesis of deacetoxycephalosporin G in a sequential batch reactor operation, where a 20% increase in the cumulative productivity was obtained by including an intermediate stage of reactivation after 50% inactivation. Biotechnol. Bioeng. 2009;103: 472–479. © 2009 Wiley Periodicals, Inc.     

Facilitated synthesis of inulin esters by transesterification

Inulin, the polydisperse polyfructose, extracted from chicory, has been modified via transesterification, using fatty acid methyl esters (FAME). The grafting of an alkyl chain onto the inulin backbone under different conditions for the development of potential tensio-active derivatives is described. The modification of the biopolymer was performed in polar organic solvents, such as dimethyl sulfoxide (DMSO) and N-methylpyrrolidinone (NMP). Depending on the type of solvent, different catalytic systems, such as DMSO-Na+, NaH, and NaOMe, were used and compared in reaction efficiency and reproducibility. Therefore the synthesized derivatives were characterized by 1H- and 13C NMR. The methods using NaH had a mean reaction efficiency of 80%, whereas the one using NaOMe showed a slight decrease in reaction efficiency to 75%. However, the method using NaOMe in NMP proved to be the preferred way to graft the inulin backbone with FAME on a bigger scale. The methods using DMSO as a solvent were not attractive since the end products had a specific bad smell.     

The Pseudomonas syringae genome encodes a combined mannuronan C-5-epimerase and O-acetylhydrolase, which strongly enhances the predicted gel-forming properties of alginates

Alginates are industrially important, linear copolymers of beta-d-mannuronic acid (M) and its C-5-epimer alpha-l-guluronic acid (G). The G residues originate from a postpolymerization reaction catalyzed by mannuronan C-5-epimerases (MEs), leading to extensive variability in M/G ratios and distribution patterns. Alginates containing long continuous stretches of G residues (G blocks) can form strong gels, a polymer type not found in alginate-producing bacteria belonging to the genus Pseudomonas. Here we show that the Pseudomonas syringae genome encodes a Ca(2+)-dependent ME (PsmE) that efficiently forms such G blocks in vitro. The deduced PsmE protein consists of 1610 amino acids and is a modular enzyme related to the previously characterized family of Azotobacter vinelandii ME (AlgE1-7). A- and R-like modules with sequence similarity to those in the AlgE enzymes are found in PsmE, and the A module of PsmE (PsmEA) was found to be sufficient for epimerization. Interestingly, an R module from AlgE4 stimulated Ps-mEA activity. PsmE contains two regions designated M and RTX, both presumably involved in the binding of Ca(2+). Bacterial alginates are partly acetylated, and such modified residues cannot be epimerized. Based on a detailed computer-assisted analysis and experimental studies another PsmE region, designated N, was found to encode an acetylhydrolase. By the combined action of N and A PsmE was capable of redesigning an extensively acetylated alginate low in G from a non gel-forming to a gel-forming state. Such a property has to our knowledge not been previously reported for an enzyme acting on a polysaccharide.