Anoxybacillus kamchatkensis sp. nov., a novel thermophilic facultative aerobic bacterium with a broad pH optimum from the Geyser valley, Kamchatka

A facultative aerobic, moderately thermophilic, spore forming bacterium, strain JW/VK-KG4 was isolated from an enrichment culture obtained from the Geyser valley, a geothermally heated environment located in the Kamchatka peninsula (Far East region of Russia). The cells were rod shaped, motile, peritrichous flagellated stained Gram positive and had a Gram positive type cell wall. Aerobically, the strain utilized a range of carbohydrates including glucose, fructose, trehalose, proteinuous substrates, and pectin as well. Anaerobically, only carbohydrates are utilized. When growing on carbohydrates, the strain required yeast extract and vitamin B₁₂. Anaerobically, glucose was fermented to lactate as main product and acetate, formate, ethanol as minor products. Aerobically, even in well-aerated cultures (agitated at 500 rpm), glucose oxidation was incomplete and lactate and acetate were found in culture supernatants as by-products. Optimal growth of the isolate was observed at pH^{25 C} 6.8–8.5 and 60°C. The doubling times on glucose at optimal growth conditions were 34 min (aerobically) and 40 min (anaerobically). The G+C content was 42.3 mol% as determined by T_m assay. Sequence analysis of the 16S rRNA gene indicated an affiliation of strain JW/VK-KG4 with Anoxybacillus species. Based on its morphology, physiology, phylogenetic relationship and its low DNA-DNA homology with validly published species of Anoxybacillus, it is proposed that strain JW/VK-KG4 represents a new species in the genus Anoxybacillus as A. kamchatkensis sp. nov. The type strain for the novel species is JW/VK-KG4^T (=DSM 14988, =ATCC BAA-549). The GenBank accession number for the 16S rDNA sequence is AF510985.     

Isolation and characterization of BTEX tolerant and degrading Pseudomonas putida BCNU 106

Bacterial strains growing in river sediments were screened to identify an organic solvent-tolerant strain of Pseudomonas. Using this screen, Pseudomonas sp. BCNU 106 was isolated on the basis of its ability to grow on benzene, toluene, ethylbenzene, and three xylene isomers, o-, m- and p-xylene, as its sole carbon source. BCNU 106 was identified as a gram-negative, rod-shaped aerobic and mesophilic bacterium, which grew in liquid media containing high concentrations of organic solvents. 16S rDNA analysis classified BCNU 106 as a new member of the genus Pseudomonas. BCNU 106 was distinguishable from other Pseudomonas strains that are tolerant to organic solvents in that the isolate had the ability to utilize all three xylene isomers as well as benzene, toluene and ethylbenzene. The unique properties of the isolate such as solvent-tolerance and the ability to degrade xylene isomers may have important implications for the efficient treatment of solvent wastes.     

<Emphasis Type="Italic">Anoxybacillus mongoliensis</Emphasis> sp. nov., a novel thermophilic proteinase producing bacterium isolated from alkaline hot spring,Central Mongolia

A Gram reaction positive, spore-forming, facultative anaerobic bacterium belonging to the Phylum Firmicutes, was isolated from alkaline hot (80°C, pH 9.8) spring Tsenher, Central Mongolia. The cells were rod shaped, feebly motile, peritrichously flagellated. Strain T4T was moderately thermophilic with optimum growth at 60°C. Maximum temperature for growth was between 70 and 75°C; minimum temperature for growth was between 35 and 30°C. Alkalitolerant, optimum pH for growth was 8.0; minimum pH for growth was between 5.0 and 5.5 and maximum was between 10.5 and 10.8. The growth was observed at NaCl concentrations of 0–5% (w/v) with the optimum at 0.2–0.5%. No growth was observed at 6% NaCl (w/v). Aerobically, the strain utilized proteinaceous substrates, organic acids and a range of carbohydrates including glucose, ribose, sucrose and xylose as well. Anaerobically, only glucose and sucrose were utilized. Strain T4^T produced thermostable alkaline subtilisin-like serine proteinase. The G + C content was 44.2 mol % (td). On the basis of 16S rRNA gene sequence similarity strain T4^T was shown to be closely related to the members of the genus Anoxybacillus (family Bacillaceae, class “Bacilli”). DNA-DNA hybridization data revealed that strain T4^T had only 38% relatedness to A. flavithermus and 28% relatedness to A. pushchinoensis. Based on its morphology, physiology, phylogenetic relationship and its low DNA-DNA relatedness values with validly published species of Anoxybacillus, it is proposed that strain T4^T represents a novel species Anoxybacillus mongoliensis sp. nov., with the type strain T4^T (=DSM 19169 =VKM 2407).     

Anoxybacillus thermarum sp. nov., a novel thermophilic bacterium isolated from thermal mud in Euganean hot springs, Abano Terme, Italy

A novel aerobe thermophilic endospore-forming bacterium designated strain AF/04^T was isolated from thermal mud located in Euganean hot springs, Abano Terme, Padova, Italy. Strain AF/04^T was Gram-positive, motile, rod-shaped, occurring in pairs, or filamentous. The isolate grew between 55 and 67°C (optimum 65°C) and at pH 6.0–7.5 (optimum pH 7.2). The strain was aerobic and grew on maltose, trehalose, and sodium acetate as sole carbon sources. The G + C content of DNA was 53.5 mol%. Phylogenetic analysis based on 16S rRNA gene sequences showed that strain AF/04^T falls within the genus Anoxybacillus. Levels of 16S rRNA gene sequence similarity between strain AF/04^T and the type strains of recognized Anoxybacillus species ranged from 95 to 99%. Chemotaxonomic data (major isoprenoid quinone–menaquinone-7; major fatty acid iso-C15:0 and anteiso-C17:0) supported the affiliation of strain AF/04^T to the genus Anoxybacillus. Based on phenotypic and chemotaxonomic characteristics, 16S rRNA gene sequence analysis and DNA–DNA hybridization data, it was proposed that strain AF/04^T (=DSM 17141^T = ATCC BAA 1156^T) should be placed in the genus Anoxybacillus as the type strain of a novel species, Anoxybacillus thermarum sp. nov.     

Organic solvent tolerance of an alkaline protease from salt-tolerant alkaliphilic <Emphasis Type="Italic">Streptomyces clavuligerus</Emphasis> strain Mit-1

A salt-tolerant alkaliphilic actinomycete, Mit-1 was isolated from Mithapur, coastal region of Gujarat, India. The strain was identified as Streptomyces clavuligerus and based on 16S rRNA gene sequence (EU146061) homology; it was related to Streptomyces sp. (AY641538.1). The organism could grow with up to 15% salt and pH 11, optimally at 5% and pH 9. It was able to tolerate and secrete alkaline protease in the presence of a number of organic solvents including xylene, ethanol, acetone, butanol, benzene and chloroform. Besides, it could also utilize these solvents as the sole source of carbon with significant enzyme production. However, the organism produced spongy cell mass with all solvents and an orange brown soluble pigment was evident with benzene and xylene. Further, the enzyme secretion increased by 50-fold in the presence of butanol. With acetone and ethanol; the enzyme was highly active at 60–80°C and displayed optimum activity at 70°C. The protease was significantly stable and catalyzed the reaction in the presence of xylene, acetone and butanol. However, ethanol and benzene affected the catalysis of the enzyme adversely. Crude enzyme preparation was more stable at 37°C in solvents as compared to partially purified and purified enzymes. The study holds significance as only few salt-tolerant alkaliphilic actinomycetes are explored and information on their enzymatic potential is still scares. To the best of our knowledge this is the first report on organic solvent tolerant protease from salt-tolerant alkaliphilic actinomycetes.     

Molybdate reduction by Pseudomonas sp. strain DRY2

Aims: To isolate and characterize a potent molybdenum‐reducing bacterium. Methods and Results: A minimal salt medium supplemented with 10 mmol l^?1 molybdate, glucose (1·0%, w/v) as a carbon source and ammonium sulfate (0·3%, w/v) as a nitrogen source was used in the screening process. A molybdenum‐reducing bacterium was isolated and tentatively identified as Pseudomonas sp. strain DRY2 based on carbon utilization profiles using Biolog GN plates and partial 16S rDNA molecular phylogeny. Strain DRY2 produced 2·4, 3·2 and 6·2 times more molybdenum blue compared to Serratia marcescens strain DRY6, Enterobacter cloacae strain 48 and Eschericia coli K12, respectively. Molybdate reduction was optimum at 5 mmol l^?1 phosphate. The optimum molybdate concentration that supported molybdate reduction at 5 mmol l^?1 phosphate was between 15 and 25 mmol l^?1. Molybdate reduction was optimum at 40°C and at pH 6·0. Phosphate concentrations higher than 5 mmol l^?1 strongly inhibited molybdate reduction. Inhibitors of electron transport system such as antimycin A, rotenone, sodium azide and cyanide did not inhibit the molybdenum‐reducing enzyme activity. Chromium, copper, mercury and lead inhibited the molybdenum‐reducing activity. Conclusions: A novel molybdenum‐reducing bacterium with high molybdenum reduction capacity has been isolated. Significance and Impact of the Study: Molybdenum is an emerging global pollutant that is very toxic to ruminants. The characteristics of this bacterium suggest that it would be useful in the bioremediation of molybdenum pollutant.     

Utilization of tannery solid waste for protease production by Synergistes sp. in solid‐state fermentation and partial protease characterization

Synergistes sp. DQ560074 produced a protease in submerged fermentation (SmF) at 400–420 U/mL and in solid‐state fermentation (SSF) at 745–755 U/g. The protease, which belongs to the aspartic protease class, was active over a wide range of pH (5–7) and at high temperatures (25–45°C). The protease is stable and active in various polar protic solvents (50% v/v) like ethanol, isopropanol, n–butanol, in polar aprotic solvents (50% v/v) like acetonitrile, and in non‐polar solvents (50% v/v) such as ethylacetate and toluene, but not in hydrophilic organic solvents (methyl alcohol and acetone). As far as we know, this is the first contribution to the production of a mesophilic protease with solvent stability in SSF using a proteinaceous solid waste.     

<Emphasis Type="Italic">Anoxybacillus rupiensis</Emphasis> sp. Nov., a novel thermophilic bacterium isolated from Rupi basin (Bulgaria)

Three strains of a novel thermophilic, strictly aerobic, Gram-positive, spore-forming hemo-organotrophic bacterium were isolated from three hot springs in the region of Rupi basin, Bulgaria as producers of amylolytic enzymes. Their 16S rRNA gene sequences (first 500 nucleotides) were very similar (99.8%). Strains were able to ferment a wide spectrum of carbohydrates such as sugars, polyols, and polysaccharides like xylan, glycogen and starch. Optimal growth was observed at 55–58°C, and pH at 6.0–6.5. Phylogenetic analysis of the whole 16S rRNA gene sequence clustered the strain R270^T with the representatives of the genus Anoxybacillus and with Geobacillus tepidamans. The G + C content of the genomic DNA was 41.7%. DNA–DNA hybridization analysis revealed low homology with the closest relatives (32.0 mol% homology to Geobacillus tepidamans). Fatty acid profile (major fatty acids iso-C15:0 and iso-C17:0) confirmed the affiliation of the strain to the genus Anoxybacillus. On the basis of the data presented here, we propose that strain R270^T, represents a new species of the genus Anoxybacillus for which, we recommend the name Anoxybacillus rupiensis sp. nov. (=DSM 17127^T = NBIMCC 8387^T). The 16S rRNA gene sequence data of a strain R270^T have been deposited in the EMBL databases under the accession number AJ879076.     

Isolation of new toluene-tolerant marine strains of bacteria and characterization of their solvent-tolerance properties

Aims:  To isolate and characterize new marine bacteria capable of tolerating high concentrations of organic solvents, and to understand the toxic effects of these chemicals on marine bacteria. Methods and Results:  Five marine bacteria able to tolerate 0·1% (v/v) toluene were isolated and characterized on the basis of their growth and survival rates in the presence of different organic solvents. The toluene-tolerant marine bacteria identified in this study could not grow in the presence of 0·1% (v/v) of several organic solvents with a log P_ow higher than that of the toluene (which in theory should be less toxic than toluene). The mechanisms underlying solvent tolerance were explored. Conclusions:  Isolates of four different genera were identified as toluene-tolerant. Toxicity of a second phase of an organic solvent toward these isolates could not be predicted on the basis of the solvents’ log P_ow. Significance and Impact of the Study:  To improve the biodegradation rate of some water-insoluble compounds, double-phase bioreactors can be used. This type of bioreactor will require strains able to grow in a salt-containing environment and able to tolerate a second phase of an organic solvent.     

Mesophilic and thermophilic BTEX substrate interactions for a toluene-acclimatized biofilter

Benzene, toluene, ethylbenzene and xylene (BTEX) substrate interactions for a mesophilic (25°C) and thermophilic (50°C) toluene-acclimatized composted pine bark biofilter were investigated. Toluene, benzene, ethylbenzene, o-xylene, m-xylene and p-xylene removal efficiencies, both individually and in paired mixtures with toluene (1:1 ratio), were determined at a total loading rate of 18.1 g m^–3 h^–1 and retention time ranges of 0.5–3.0 min and 0.6–3.8 min for mesophilic and thermophilic biofilters, respectively. Overall, toluene degradation rates under mesophilic conditions were superior to degradation rates of individual BEX compounds. With the exception of p-xylene, higher removal efficiencies were achieved for individual BEX compounds compared to toluene under thermophilic conditions. Overall BEX compound degradation under mesophilic conditions was ranked as ethylbenzene >benzene >o-xylene >m-xylene >p-xylene. Under thermophilic conditions overall BEX compound degradation was ranked as benzene >o-xylene >ethylbenzene >m-xylene >p-xylene. With the exception of o-xylene, the presence of toluene in paired mixtures with BEX compounds resulted in enhanced removal efficiencies of BEX compounds, under both mesophilic and thermophilic conditions. A substrate interaction index was calculated to compare removal efficiencies at a retention time of 0.8 min (50 s). A reduction in toluene removal efficiencies (negative interaction) in the presence of individual BEX compounds was observed under mesophilic conditions, while enhanced toluene removal efficiency was achieved in the presence of other BEX compounds, with the exception of p-xylene under thermophilic conditions.     

Screening and identification of a novel organic solvent-stable lipase producer

A strain named DS9 excreting organic solvent-stable lipase was screened and later identified asBacillus subtilis based on its phenotypes, biochemical test, and 16S rRNA gene sequence. Strain DS9 grows well on the medium with 10% (v/v) organic solvent with log P values equal to or above 2.5. The organic solvent-tolerant lipase excreted by strain DS9 had a wider tolerance for organic solvents. The relative activity of the lipase was above 60% at 37 °C, 200 rpm, 30 min in the present of 25% (v/v) organic solvents such as 1-butanol, hexanol, benzene, and toluene. The lipase was not only stable but also activated by n-hexane, xylene, heptane, isooctane, and n-decane. The optimal pH and temperature were 8.0 and 40 °C, respectively. Both the organic solvent-tolerant microorganism and the organic solvent-stable lipase produced by this strain could be used as a biocatalyst for application in non-aqueous biocatalysis.     

Bioremediation Assessment of a BTEX‐Contaminated Soil

The elimination of BTEX (benzene, toluene, ethylbenzene, o‐xylene) compounds from soil was studied. After 18 days at 20 °C, 21% of the initial total BTEX contamination (400 mg/kg soil) was lost due to sorption onto soil. Biodegradation decreased in the order ethylbenzene > toluene > benzene > o‐xylene. NPK fertilisation stimulated biodegradation, particularly that of benzene and toluene, significantly, and oleophilic fertilisation inhibited biodegradation. After 18 days, the residual contamination in the NPK‐fertilised, unfertilised and with oleophilic nutrients amended soil was 96, 166 and 196 mg total BTEX/kg soil, respectively. The presence of BTEX initially inhibited the biological activity of the soil (fluorescein diacetate hydrolysis) considerably. This short‐term, reversible inhibition was significantly higher in the unfertilised soil than in the fertilised soil.     

<Emphasis Type="Italic">Anoxybacillus sediminis</Emphasis> sp. nov., a novel moderately thermophilic bacterium isolated from a hot spring

A Gram-stain positive, moderately thermophilic, aerobic, spore-forming and rod-shaped bacterium, designated YIM 73012^T, was isolated from a sediment sample collected from a hot spring located in Tibet, China, and was characterized by using a polyphasic taxonomy approach. The strain is oxidase positive and catalase negative. Growth occurred at 37–65 °C (optimum, 45–50 °C), at pH 6.0–8.5 (optimum, pH 7.0–7.5) and with 0.5–3.5% NaCl (optimum, 0.5–1.0%, w/v). The major fatty acids were iso-C_15:0, iso-C_16:0 and C_16:0. The major polar lipids comprised of diphosphatidylglycerol, phosphatidylethanolamine, phosphatidylmethylethanolamine and phosphatidylglycerol. The cell wall peptidoglycan contained meso-diaminopimelic acid. The respiratory quinone was MK-7. The G+C content of genomic DNA was 43.6 mol%. Phylogenetic analyses based on 16S rRNA gene sequences showed that the strain YIM 73012^T forms a distinct lineage with respect to the genus Anoxybacillus in the family Bacillaceae. Based on 16S rRNA gene sequence identities the closely related phylogenetic neighbours are Anoxybacillus caldiproteolyticus DSM 15730^T (96.7%) and Saccharococcus thermophilus DSM 4749^T (96.6%). Strain YIM 73012^T was distinguishable from the closely related reference strains by the differences in phenotypic, chemotaxonomic and genotypic characteristics, and represents a novel species of the genus Anoxybacillus, for which the name Anoxybacillus sp. nov. is proposed. The type species is Anoxybacillus sediminis sp. nov., with the type strain YIM 73012^T (=?KCTC 33884^T?=?DSM 103835^T).     

Degradation of Benzene,Toluene and Xylene by Pseudomonas aeruginosa Engineered with the Vitreoscilla Hemoglobin Gene

This study concerns the potential use of Pseudomonas aeruginosa expressing the Vitreoscilla hemoglobin gene for the degradation of important harmful aromatic compounds such as benzene, toluene, and xylene (BTX). The use of these compounds by both strains was determined as the production of cell mass (viable cell number) in a minimal medium containing any one of the BTX compounds as the sole carbon and energy source. Furthermore, the BTX degradation capability of both strains was monitored by measuring the production of 3‐methylcatechol, a common intermediate. For the cells of the logarithmic phase, which were grown at high aeration/high agitation or low aeration/low agitation, the engineered strain showed a better growth rate than the host strain. With the benzene in the medium, the recombinant strain exhibited a higher (up to 4‐fold) cell density than the parental wild‐type strain at this phase. In contrast, regarding the cells of the late stationary phase under high aeration/high agitation conditions, the host strain had generally higher viable cell numbers than the recombinant strain. At this phase this difference was, however, less significant under the conditions of low aeration/low agitation. Similarly, in toluene containing medium (at high aeration/high agitation) the recombinant strain showed a higher cell density which was from a 15‐fold to almost one order of magnitude greater than its parental strain during the logarithmic phase where the cell density of P. aeruginosa remained nearly constant. Contrary to the results with benzene and toluene, both strains exhibited similar growth characteristics when they were grown in the presence of xylene. The positive effect of the oxygen uptake by the recombinant system on the BTX metabolizing activity was also apparent in a high accumulation of 3‐methylcatechol in the cultures of the recombinant strain. At certain points of incubation, the hemoglobin expressing strain showed a significantly (p < 0.05) higher 3‐methylcatechol accumulation than the host strain. These results demonstrated the possible potential of the Vitreoscilla hemoglobin as an efficient oxygen uptake system for the bioremediation of some compounds of environmental concern.     

Batch and fed-batch bioreactor cultivations of a Thermus species with thermophilic BTEX-degrading activity

The thermophilic bacterium, Thermus species ATCC 27978, which is capable of aerobically degrading benzene, toluene, ethylbenzene, and the xylenes (BTEX), was cultured in 5-1 fermentors on a Castenholz salts-tryptone medium. This bacterium can be cultivated more conveniently at 45 °C, a temperature substantially lower than its optimal growth temperature (approx. 60 °C). Yet, the washed harvested cells from such cultures display the same initial BTEX-degrading activity as those when Thermus sp. is grown at its higher optimal temperature. Two bioreactor cultivation modes, batch and fed batch, were investigated. More biomass and more BTEX-degrading activity (assayed at 60 °C) were generated in fed-batch cultures than in the growth-limited batch cultures. The former yielded a biomass concentration of 2.5 g dry cell weight (DCW) l⁻¹ and whole-cell degrading specific activities of 7.6 ± 1.3, 10.1 ± 1.9, 9.8 ± 2.1, 2.3 ± 0.5, and 4.6 ± 0.9 nmol degraded (mg DCW)⁻¹ min⁻¹ for benzene, toluene, ethylbenzene, m-xylene, and the o- plus p-xylenes (unresolved mixture), respectively. Although the formation of cellular BTEX-degrading activity is growth-associated, a slow to moderate specific growth rate of 0.02–0.07 h⁻¹ favors the production of BTEX-degrading activity, while a high growth rate, of the order of 0.16 h⁻¹, is detrimental to its production. The washed harvested Thermus sp. cells were capable of degrading BTEX over a broad range of thermophilic incubation temperatures, 45–77 °C. Received: 28 June 1996 / Received revision: 31 December 1996 / Accepted: 31 January 1997     

Isolation,gene detection and solvent tolerance of benzene,toluene and xylene degrading bacteria from nearshore surface water and Pacific Ocean sediment

BTX (benzene, toluene and xylene) degrading bacteria were isolated from Pacific Ocean sediment and nearshore surface water. In the seawater near a ferry dock, degrading bacteria of a relatively wide diversity were detected, including species of Pseudomonas, Rhodococcus, Exiguobacterium and Bacillus; while species of Bacillus only have been detected from the deep-sea sediment. Most of the isolates showed degradation to more than one compound. Generally better growth was obtained with p-xylene and ethylbenzene than with the other two. All the bacteria could tolerate and grow with the compounds at 5–20% (v/v). Both benzene and toluene degradation related genes had been successfully PCR cloned from the isolates of nearshore water, the detected benzene dioxygenase gene was identical among all the species and close to its soil counterpart. However, they were not detected in all the isolates from deep sea. Results in this report suggested that BTX degrading bacteria widely spread in marine environments and they might be of potentials in biotreatment of BTEX in saline environments.     

Change of sludge consortium in response to sequential adaptation to benzene, toluene, and o-xylene

Activated sludge was sequentially adapted to benzene, toluene, and o-xylene (BTX) to study the effects on the change of microbial community. Sludge adapted to BTX separately degraded each by various rates in the following order; toluene>o-xylene>benzene. Degradation rates were increased after exposure to repeated spikes of substrates. Eleven different kinds of sludge were prepared by the combination of BTX sequential adaptations. Clustering analyses (Jaccard, Dice, Pearson, and cosine product coefficient and dimensional analysis of MDS and PCA for DGGE patterns) revealed that acclimated sludge had different features from nonacclimated sludge and could be grouped together according to their prior treatment. Benzene- and xylene-adapted sludge communities showed similar profiles. The sludge profile was affected from the point of the final adaptation substrate regardless of the adaptation sequence followed. In the sludge adapted to 50 ppm toluene, Nitrosomonas sp. and bacterium were dominant, but these bands were not dominant in benzene and benzene after toluene adaptations. Instead, Flexibacter sp. was dominant in these cultures. Dechloromonas sp. was dominant in the culture adapted to 50 ppm benzene. Thauera sp. was the main band in the sludge adapted to 50 ppm xylene, but became vaguer as the xylene concentration was increased. Rather, Flexibacter sp. dominated in the sludge adapted to 100 ppm xylene, although not in the culture adapted to 250 ppm xylene. Two bacterial species dominated in the sludge adapted to 250 ppm xylene, and they also existed in the sludge adapted to 250 ppm xylene after toluene and benzene.     

Bioactive stilbenes from a Bacillus sp. N strain associated with a novel rhabditid entomopathogenic nematode

Aims: The aim of the present study was to purify and characterize a natural antimicrobial compound from Bacillus sp. strain N associated with a novel rhabditid entomopathogenic nematode. Methods and Results: The cell‐free culture filtrate of a bacterium associated with a novel entomopathogenic nematode (EPN), Rhabditis (Oscheius) sp. exhibited strong antimicrobial activity. The ethyl acetate extract of the bacterial culture filtrate was purified by column chromatography, and two bioactive compounds were isolated and their chemical structures were established based on spectral analysis. The compounds were identified as 3,4′,5‐trihydroxystilbene (1) and 3,5‐dihydroxy‐4‐isopropylstilbene (2). The presence of 3,4′,5‐trihydroxystilbene (resveratrol) is reported for the first time in bacteria. Compound 1 showed antibacterial activity against all the four test bacteria, whereas compound 2 was effective against the Gram‐positive bacteria only. Compounds 1 and 2 were active against all the five fungi tested and are more effective than bavistin, the standard fungicide. The antifungal activity of the compounds against the plant pathogenic fungi, Rhizoctonia solani is reported for the first time. Conclusions: Cell‐free extract of the bacterium and isolated stilbenes demonstrated high antibacterial activity against bacteria and fungi especially against plant pathogenic fungi. We conclude that the bacterium‐associated EPN are promising sources of natural bioactive secondary metabolites. Significance and Impact of the Study: Stilbene compounds can be used for the control of fungi and bacteria.     

Isolation and characterization of Deinococcus geothermalis T27, a slightly thermophilic and organic solvent-tolerant bacterium able to survive in the presence of high concentrations of ethyl acetate

A solvent-tolerant, slightly thermophilic bacterium was isolated at 45 degrees C in the presence of toluene vapor provided as the sole carbon source. Strain T27 was identified as Deinococcus geothermalis T27. It could tolerate high concentrations of solvent provided as a nonaqueous layer (5% and 20%, v/v) to a cell suspension and had a remarkable ability to tolerate a broad range of solvents having log P(ow) values ranging from 5.6 of n-decane to as low as 0.7 of ethyl acetate. It was also able to utilize some of the solvents tested as a growth substrate at 45 degrees C. The addition of Ca(2+) ion, glucose and fructose partially promoted solvent tolerance. Cells exposed to ethyl acetate appeared to have a smaller size; however, the cell structure was not altered and was apparently well defined even after solvent shock. The tolerance of D. geothermalis T27 in the presence of high levels of toxic solvent stress at a comparatively high temperature indicated its potential use in biotechnological applications as well as bioremediation of xenobiotics.     

Isolation and characterization of thermophilic,alkaliphilic, cellulose‐degrading bacillus thermoalcaliphilus sp. nov. from termite (odontotermes obesus) mound soil of a semiarid area

A new heterotrophic, thermophilic, alkaliphilic, facultatively anaerobic, cellulose‐degrading bacterium strain STS1 was isolated from mound soils infested with the higher termite Odontotermes obesus in the semiarid ecosystem of Delhi (India). The gram‐positive, spore‐forming, catalase‐positive Bacillus sp. grew on natural and raw celluloses. The taxonomic position of the organism was investigated. The guanine plus cytosine content of the isolate was found to be 48.6 mol% (melting temperature profile). Addition of peptone or yeast extract stimulated growth. The isolate did not grow on silica gel plates or on agar media in which the agar was the sole source of carbon and energy. The high growth temperature of 70°C and the pH of 9.0 are characteristic of this species. The role of this bacterium in the semiarid ecosystem is discussed. Because of its high optimum temperature and high optimum pH for growth, the name Bacillus thermoalcaliphilus is proposed.