Prohead and DNA-gp3-dependent ATPase activity of the DNA packaging protein gp16 of bacteriophage phi 29

The ATPase activity of the DNA packaging protein gp16 (gene product 16) of bacteriophage phi 29 was studied in the completely defined in-vitro assembly system. ATP was hydrolyzed to ADP and Pi in the packaging reaction that included purified proheads, DNA-gp3 and gp16. Approximately one molecule of ATP was used in the packaging of 2 base-pairs of phi 29 DNA, or 9 X 10(3) ATP molecules per virion. The hydrolysis of ATP by gp16 was both prohead and DNA-gp3 dependent. gp16 contained both the "A-type" and the "B-type" ATP-binding consensus sequences (Walker et al., 1982) and the predicted secondary structure for ATP binding. The A-type sequence of gp16 was "basic-hydrophobic region-G-X2-G-X-G-K-S-X7-hydrophobic", and similar sequences were found in the phage DNA packaging proteins gpA of lambda, gp19 of T7 and gp17 of T4. Having both the ATP-binding and potential magnesium-binding domains, all of these proteins probably function as ATPases and may have common prohead-binding capabilities. The phi 29 protein gp3, covalently bound to the DNA, may be analogous in function to proteins gpNul of lambda and gpl of phi 21 that bind the DNA.     

DNA packaging motor assembly intermediate of bacteriophage phi29

Unraveling the structure and assembly of the DNA packaging ATPases of the tailed double-stranded DNA bacteriophages is integral to understanding the mechanism of DNA translocation. Here, the bacteriophage phi29 packaging ATPase gene product 16 (gp16) was overexpressed in soluble form in Bacillus subtilis (pSAC), purified to near homogeneity, and assembled to the phi29 precursor capsid (prohead) to produce a packaging motor intermediate that was fully active in in vitro DNA packaging. The formation of higher oligomers of the gp16 from monomers was concentration dependent and was characterized by analytical ultracentrifugation, gel filtration, and electron microscopy. The binding of multiple copies of gp16 to the prohead was dependent on the presence of an oligomer of 174- or 120-base prohead RNA (pRNA) fixed to the head-tail connector at the unique portal vertex of the prohead. The use of mutant pRNAs demonstrated that gp16 bound specifically to the A-helix of pRNA, and ribonuclease footprinting of gp16 on pRNA showed that gp16 protected the CC residues of the CCA bulge (residues 18-20) of the A-helix. The binding of gp16 to the prohead/pRNA to constitute the complete and active packaging motor was confirmed by cryo-electron microscopy three-dimensional reconstruction of the prohead/pRNA/gp16 complex. The complex was capable of supercoiling DNA-gp3 as observed previously for gp16 alone; therefore, the binding of gp16 to the prohead, rather than first to DNA-gp3, represents an alternative packaging motor assembly pathway.     

Defining molecular and domain boundaries in the bacteriophage phi29 DNA packaging motor

Cryo-electron microscopy (cryo-EM) studies of the bacteriophage phi29 DNA packaging motor have delineated the relative positions and molecular boundaries of the 12-fold symmetric head-tail connector, the 5-fold symmetric prohead RNA (pRNA), the ATPase that provides the energy for packaging, and the procapsid. Reconstructions, assuming 5-fold symmetry, were determined for proheads with 174-base, 120-base, and 71-base pRNA; proheads lacking pRNA; proheads with ATPase bound; and proheads in which the packaging motor was missing the connector. These structures are consistent with pRNA and ATPase forming a pentameric motor component around the unique vertex of proheads. They suggest an assembly pathway for the packaging motor and a mechanism for DNA translocation into empty proheads.     

Role of the CCA bulge of prohead RNA of bacteriophage ø29 in DNA packaging

The oligomeric ring of prohead RNA (pRNA) is an essential component of the ATP-driven DNA packaging motor of bacteriophage ?29. The A-helix of pRNA binds the DNA translocating ATPase gp16 (gene product 16) and the CCA bulge in this helix is essential for DNA packaging in vitro. Mutation of the bulge by base substitution or deletion showed that the size of the bulge, rather than its sequence, is primary in DNA packaging activity. Proheads reconstituted with CCA bulge mutant pRNAs bound the packaging ATPase gp16 and the packaging substrate DNA-gp3, although DNA translocation was not detected with several mutants. Prohead/bulge-mutant pRNA complexes with low packaging activity had a higher rate of ATP hydrolysis per base pair of DNA packaged than proheads with wild-type pRNA. Cryoelectron microscopy three-dimensional reconstruction of proheads reconstituted with a CCA deletion pRNA showed that the protruding pRNA spokes of the motor occupy a different position relative to the head when compared to particles with wild-type pRNA. Therefore, the CCA bulge seems to dictate the orientation of the pRNA spokes. The conformational changes observed for this mutant pRNA may affect gp16 conformation and/or subsequent ATPase-DNA interaction and, consequently, explain the decreased packaging activity observed for CCA mutants.     

Role of RNA in bacteriophage phi 29 DNA packaging

A novel bacteriophage phi 29 RNA of 174 nucleotides is essential for the in vitro packaging of the DNA-terminal protein complex into proheads. The RNA, bound to the prohead portal vertex (connector), participates in assembly and function of the DNA translocating ATPase and in recognition of the DNA left-end during the course of the packaging reaction. The RNA is present in related phages and varies widely in primary sequence, but its secondary structure, as deduced by phylogenetic analysis, is both highly conserved and unique among small RNAs.     

Role of the amino-terminal domain of bacteriophage phi 29 connector in DNA binding and packaging.

The connector of bacteriophage phi 29 is required for prohead assembly, binds DNA, and drives DNA packaging into viral proheads. Limited proteolysis of the connector protein with endoproteinase Glu-C from Staphylococcus aureus V8 and chymotrypsin showed that a domain of the NH2-terminal region is involved in DNA binding and in the subsequent packaging into preformed proheads, but not in prohead assembly. Mutants in specific amino acids of the NH2-terminal domain, obtained by directed mutagenesis techniques, showed that the Ala1-Arg2-Lys3-Arg4 region of the connector is absolutely necessary for DNA packaging into the proheads as well as for efficient DNA binding.     

Topology of the components of the DNA packaging machinery in the phage phi29 prohead

Chromosome condensation inside dsDNA viral particles is a complex process requiring the coordinated action of several viral components. The similarity of the process in different viral systems has led to the suggestion that there is a common underlying mechanism for DNA packaging, in which the portal vertex or connector plays a key role. We have studied the topology of the packaging machinery using a number of antibodies directed against different domains of the connector. The charged amino-terminal, the carboxyl-terminal, and the RNA binding domain are accessible areas in the connector assembled into the prohead, while the domains corresponding to the 12 large appendages of the connector are buried inside the prohead. Furthermore, while the antibodies against the carboxyl and amino-terminal do not affect the packaging reaction, incubation of proheads with antibodies against the RNA binding domain abolishes the packaging activity. The comparison of the three-dimensional reconstructions of bacteriophage phi29 proheads with proheads devoid of their specific pRNA by RNase treatment shows that this treatment removes structural elements of the distal vertex of the portal structure, suggesting that the pRNA required for packaging is located at the open gate of the channel in the narrow side of the connector.     

Initiation events in in-vitro packaging of bacteriophage phi 29 DNA-gp3

Initiation events in the packaging of bacteriophage phi 29 DNA-gp3 (DNA-gene product 3 complex) were studied in a completely defined in-vitro system that included purified proheads, DNA-gp3 and the DNA packaging protein gp16. In the sequential interactions, gp16 first bound to, and was modified by, the prohead. The prohead-gp16 complex then bound to DNA-gp3, resulting in a second modification of gp16 that permitted binding of ATP. DNA-gp3 aggregates were produced, and the hydrolysis of ATP accompanied DNA-gp3 packaging. Binding and hydrolysis of ATP by gp16 was both prohead- and DNA-gp3-dependent. Interruption of packaging by DNase I addition revealed filled heads but few particles containing partial lengths of DNA, suggesting that following a rate-limiting initiation, the translocation of DNA-gp3 into the prohead was much faster in the defined in-vitro system than in extracts.     

Cleaving the prohead RNA of bacteriophage phi 29 alters the in vitro packaging of restriction fragments of DNA-gp3

In vitro packaging of restriction fragments of the bacteriophage phi 29 DNA-gp3 (DNA-gene product 3 complex) in the defined system was dependent on prohead RNA. Truncated prohead RNAs were obtained by in situ RNase A digestion, isolated and sequenced. Proheads having the intact 174 base RNA were compared to proheads having RNAs of 120, 95, 71, 69 or 54 bases for the capacity to package the DNA-gp3 left and right ends and internal (non-end) fragments generated by the restriction enzymes EcoRI, HpaI and BstNI. Proheads with the 174 or 120 base RNAs packaged both left and right ends; internal fragments were packaged more efficiently by proheads with the 120 base RNA. Proheads with the 95 base RNA packaged DNA-gp3 left ends and internal fragments efficiently, but lost the capacity to package right ends. Only internal fragments were packaged by proheads with the 71 base RNA, and proheads having 69 or 54 base RNAs were inactive. RNA-free proheads were effectively reconstituted with purified 174 and 120 base RNAs to produce particles similar in biological activity to the proheads from which the RNAs were isolated. The 95 base RNA was the smallest RNA of the group that could reconstitute the prohead and direct fragment packaging, although packaging was inefficient. Alteration of the specificity of DNA fragment packaging with truncated prohead RNAs has delineated RNA domains that function in DNA-gp3 recognition and prohead binding.     

Bacteriophage phi 29 proteins required for in vitro DNA-gp3 packaging

In vitro assembly of bacteriophage phi 29 in crude extracts involves efficient packaging of a DNA-protein complex (DNA- gp3 ) into a prohead with the aid of the gene 16 product ( gp16 ) and subsequent assembly of neck and tail proteins ( Bjornsti et al., J. Virol. 41:508-517, 1982; Bjornsti et al., J. Virol. 45:383-396, 1983; Bjornsti et al., Proc. Natl. Acad. Sci. U.S.A. 78:5861-5865, 1981). To define the viral proteins required for the DNA- gp3 encapsidation phase, we purified biologically active proheads and DNA- gp3 and constructed a chimeric plasmid, pUM101 , which contained and expressed gene 16 of phi 29 and no other viral genes. The plasmid-specified gp16 was both necessary and sufficient to package 24% of the DNA- gp3 added to the purified proheads , and the DNA-filled heads so produced were efficiently complemented to infectious phage by the addition of neck and tail proteins. Purified proheads and DNA- gp3 gave linear dose-response curves with slopes of approximately 1; in contrast, a 4-fold dilution of gp16 resulted in a 1,000-fold reduction of phi 29, suggesting a requirement for multiple copies of this protein.     

Bacillus subtilis mutants defective in bacteriophage phi 29 head assembly.

Virus assembly mutants of asporogenous Bacillus subtilis defective in bacteriophage phi 29 head assembly were detected by the use of antibodies that reacted strongly with the free dodecameric phi 29 portal vertex composed of gene product 10 (gp10) but weakly with the portal vertex assembled into proheads or phage. Phage adsorption and the synthesis of phage proteins, DNA-gene product 3, and prohead RNA were normal in these mutants, but prohead and phage production was greatly reduced. The assembly defect was transferred to competent B. subtilis by transformation and transduction. PBS1 transduction showed that the vam locus was linked to Tn917 located at 317 degrees on the B. subtilis chromosome.     

Purification and functional characterization of p16, the ATPase of the bacteriophage Φ29 packaging machinery

Bacteriophage Φ29 codes for a protein (p16) that is required for viral DNA packaging both in vivo and in vitro. Co-expression of p16 with the chaperonins GroEL and GroES has allowed its purification in a soluble form. Purified p16 shows a weak ATPase activity that is stimulated by either DNA or RNA, irrespective of the presence of any other viral component. The stimulation of ATPase activity of p16, although induced under packaging conditions, is not dependent of the actual DNA packaging and in this respect the Φ29 enzyme is similar to other viral terminases. Protein p16 competes with DNA and RNA in the interaction with the viral prohead, which occurs through the N-terminal region of the connector protein (p10). In fact, p16 interacts in a nucleotide-dependent fashion with the viral Φ29-encoded RNA (pRNA) involved in DNA packaging, and this binding can be competed with DNA. Our results are consistent with a model for DNA translocation in which p16, bound and organized around the connector, acts as a power stroke to pump the DNA into the prohead, using the hydrolysis of ATP as an energy source.     

The DNA translocating ATPase of bacteriophage T4 packaging motor

In double-stranded DNA bacteriophages the viral DNA is translocated into an empty prohead shell by a powerful ATP-driven motor assembled at the unique portal vertex. Terminases consisting of two to three packaging-related ATPase sites are central to the packaging mechanism. But the nature of the key translocating ATPase, stoichiometry of packaging motor, and basic mechanism of DNA encapsidation are poorly understood. A defined phage T4 packaging system consisting of only two components, proheads and large terminase protein (gp17; 70 kDa), is constructed. Using the large expanded prohead, this system packages any linear double-stranded DNA, including the 171 kb T4 DNA. The small terminase protein, gp16 (18 kDa), is not only not required but also strongly inhibitory. An ATPase activity is stimulated when proheads, gp17, and DNA are actively engaged in the DNA packaging mode. No packaging ATPase was stimulated by the N-terminal gp17-ATPase mutants, K166G (Walker A), D255E (Walker B), E256Q (catalytic carboxylate), D255E-E256D and D255E-E256Q (Walker B and catalytic carboxylate), nor could these sponsor DNA encapsidation. Experiments with the two gp17 domains, N-terminal ATPase domain and C-terminal nuclease domain, suggest that terminase association with the prohead portal and communication between the domains are essential for ATPase stimulation. These data for the first time established an energetic linkage between packaging stimulation of N-terminal ATPase and DNA translocation. A core pathway for the assembly of functional DNA translocating motor is proposed. Since the catalytic motifs of the N-terminal ATPase are highly conserved among >200 large terminase sequences analyzed, these may represent common themes in phage and herpes viral DNA translocation.     

Alanine scanning and Fe-BABE probing of the bacteriophage ø29 prohead RNA-connector interaction

The DNA packaging motor of the Bacillus subtilis bacteriophage ?29 prohead is comprised in part of an oligomeric ring of 174 base RNA molecules (pRNA) positioned near the N termini of subunits of the dodecameric head-tail connector. Deletion and alanine substitution mutants in the connector protein (gp10) N terminus were assembled into proheads in Escherichia coli and the particles tested for pRNA binding and DNA-gp3 packaging in vitro. The basic amino acid residues RKR at positions 3-5 of the gp10 N terminus were central to pRNA binding during assembly of an active DNA packaging motor. Conjugation of iron(S)-1-(p-bromoacetamidobenzyl) ethylenediaminetetraacetate (Fe-BABE) to residue S170C in the narrow end of the connector, near the N terminus, permitted hydroxyl radical probing of bound [(32)P]pRNA and identified two discrete sites proximal to this residue: the C-helix at the junction of the A, C and D helices, and the E helix and the CE loop/D loop of the intermolecular base pairing site.     

Evidence that a phage T4 DNA packaging enzyme is a processed form of the major capsid gene product

A phage T4 DNA packaging enzyme appears to arise as a processed form of the major T4 capsid structural protein gp23. The enzyme activity and antigen are missing from all head gene mutants that block the morphogenetic proteolytic processing reactions of the head proteins in vivo. The enzyme antigen can be formed in vitro by T4 (gp21) specific processing of gp23 containing extracts. Enzyme antigen is found in active processed proheads but not in full heads. The enzyme and the major capsid protein show immunological cross-reactivity, produce common peptides upon proteolysis, and share an assembly-conformation-dependent ATP binding site. The packaging enzyme and the mature capsid protein (gp23*) both appear to arise from processing of gp23, the former as a minor product of a specific gp23 structure in the prohead, acting in DNA packaging as a DNA-dependent ATPase, and a headful-dependent terminase.     

Characterization of the small RNA of the bacteriophage phi 29 DNA packaging machine.

The prohead connector of the bacteriophage luminal diameter 29 DNA packaging machine was reconstructed with the small RNA that regulates DNA packaging in vitro. The complete sequence of the 120 nucleotide RNA proved its origination from the promoter PE1(A1) of the left early region of phi 29 DNA, the end packaged first during assembly. The prohead RNA was clearly distinct from eubacterial 5S rRNA in sequence and composition.     

RNA-mediated specificity of DNA packaging into hybrid lambda/phi 29 proheads.

A small RNA (pRNA, 174 nt) is known to be essential for DNA packaging in bacteriophage phi 29. However, in an in vitro DNA packaging system based on hybrid lambda/phi 29 proheads (made up of head proteins from phage lambda and connectors from phage phi 29), the specificity of DNA packaging is lost, and different RNA molecules fulfil the requirements for DNA packaging, albeit with less efficiency than phi 29 pRNA. Competition assays with RNAs from different sources have shown that phi 29 connectors bind preferentially pRNA. An increase in the efficiency of phi 29 DNA packaging into hybrid proheads induced by phi 29 pRNA is observed because, when phi 29 pRNA is incubated with hybrid proheads, phi 29 DNA is packaged more efficiently than other DNAs of similar length. Furthermore, when hybrid proheads carrying phi 29 pRNA are incubated with a mixture of DNAs from different sources, phi 29 DNA is selectively packaged, thus indicating that phi 29 pRNA determines the specificity of DNA packaging.     

Prohead RNA of bacteriophage phi 29: size, stoichiometry and biological activity.

We previously demonstrated (Guo et al., 1987. Nucl. Acids Res. 15, 7081-7090) that purified proheads of bacteriophage phi 29 contain an RNA of 120 bases which is essential for DNA packaging. Here we report that this RNA exists primarily as a polymer of ca. 174 residues in phage-infected cells and that ca. 54 bases are cleaved from its 3'-terminus by adventitious nucleases during the purification of proheads. The long and short forms of the RNA had similar activity in in vitro DNA packaging and phage assembly. We report the sequence of the long form of the RNA and show that similar long and short forms can be isolated from the proheads of the phi 29 relatives phi 21, phi 15 and SF5. The concentration dependence in the reconstitution of RNA-free proheads suggests that one copy of the RNA is sufficient to restore DNA packaging activity to RNA-free proheads. However, quantitative measurements indicate that 5 to 6 copies of the RNA are present on proheads isolated from phage-infected cells.     

Mutant prohead RNAs in the in vitro packaging of bacteriophage phi 29 DNA-gp3.

The 174-base prohead RNA encoded by bacteriophage phi 29 of Bacillus subtilis, essential for packaging of the DNA-gp3 (DNA-gene product 3) complex, was expressed efficiently from the cloned gene. Computer programs for RNA structure analysis were used to fold hypothetical RNA mutants and thus to target mutagenesis of the RNA for studies of structure and function. Five mutants of the RNA were then produced by oligonucleotide-directed mutagenesis that were altered in the primary sequence at selected sites; two of these mutants were predicted to be altered in secondary structure from a model established previously by a phylogenetic analysis. The binding of the 32P end-labeled mutant RNAs to RNA-free proheads was comparable with that of the wild-type RNA. However, the capability of the mutant RNAs to reconstitute RNA-free proheads for DNA-gp3 packaging in the defined in vitro system and for assembly of phage in RNA-free extracts was variable, depending upon the alteration. Changes of highly conserved bases that retained the predicted secondary structure of the RNA model were tolerated to a much greater extent than changes predicted to alter the RNA secondary structure.     

DNA packaging of bacteriophage T4 proheads in vitro. Evidence that prohead expansion is not coupled to DNA packaging

We developed a system for DNA packaging of isolated bacteriophage T4 proheads in vitro and studied the role of prohead expansion in DNA packaging. Biologically active proheads have been purified from a number of packaging-deficient mutant extracts. The cleaved mature prohead is the active structural precursor for the DNA packaging reaction. Packaging of proheads requires ATP, Mg2+ and spermidine, and is stimulated by polyethylene glycol and dextran. Predominantly expanded proheads (ELPs) are produced at 37 degrees C and predominantly unexpanded proheads (ESPs) are produced at 20 degrees C. Both the expanded and unexpanded proheads are active in DNA packaging in vitro. This is based on the observations that (1) both ESPs and ELPs purified by chromatography on DEAE-Sephacel showed DNA packaging activity; (2) apparently homogeneous ELPs prepared by treatment with sodium dodecyl sulfate (which dissociates ESPs) retained significant biological activity; (3) specific precipitation of ELPs with anti-hoc immunoglobulin G resulted in loss of DNA packaging activity; and (4) ESPs upon expansion in vitro to ELPs retained packaging activity. Therefore, contrary to the models that couple DNA packaging to head expansion, in T4 the expansion and packaging appear to be independent, since the already expanded DNA-free proheads can be packaged in vitro. We therefore propose that the unexpanded to expanded prohead transition has evolved to stabilize the capsid and to reorganize the prohead shell functionally from a core-interacting to a DNA-interacting inner surface.