The cell envelope of Thermoproteus tenax: three-dimensional structure of the surface layer and its role in shape maintenance

The sulphur-dependent archaebacterium Thermoproteus tenax has a cylindrical cell shape variable in length, but constant in diameter. Its whole surface is covered by a regular protein layer (S-layer). The lattice has p6 symmetry and a lattice constant of 32.8 nm. The three-dimensional reconstruction from a tilt series of isolated and negatively stained S-layer shows a complex mass distribution of the protein: a prominent, pillar-shaped protrusion is located at the 6-fold crystallographic axis with radiating arms connecting neighbouring hexamers in the vicinity of the 3-fold axis. The base vectors of the S-layer lattice have a preferred orientation with respect to the longitudinal axis of the cell. The layer can be seen as a helical structure consisting of a right-handed, two-stranded helix, with the individual chains running parallel. Supposing that new S-layer protein is inserted at lattice faults (wedge disclinations) near the poles, growing of the layer would then proceed by moving a disclination at the end of the helix. The constant shape of the cell, as well as the particular structure of the layer, strongly suggest that this S-layer has a shape-maintaining function.     

The S-layer of Caulobacter crescentus: three-dimensional image reconstruction and structure analysis by electron microscopy.

The regular surface protein structure (S-layer) of Caulobacter crescentus was analyzed by electron microscopy and three-dimensional image reconstruction to a resolution of 2 nm. Projections showed that the S-layer is an array of ring structures, each composed of six subunits that are arranged on a lattice with p6 symmetry. Three-dimensional reconstructions showed that the ring subunits were approximately rod-shaped structures and were perpendicular to the plane of the array, with a linker arm emanating from approximately the middle of the rod, accounting for the connections between the rings. The calculated subunit mass was ca. 100 kDa, very close to the size of RsaA (the protein known to be at least the predominant species in the S-layer) predicted from the DNA sequence of the rsaA gene. The core region of the rings creates an open pore 2.5 to 3.5 nm in diameter. The size of the gaps between the neighboring unit cells is in the same range, suggesting a uniform porosity predicted to exclude molecules larger than ca. 17 kDa. Attempts to remove membrane material from S-layer preparations with detergents revealed that the structure spontaneously rearranged into a mirror-image double layer. Negative-stain and thin-section electron microscopy examination of colonies of C. crescentus strains with a mutation in a surface molecule involved in the attachment of the S-layer showed that shed RsaA protein organized into large sheets. The sheets in turn organized into stacks that tended to accumulate near the upper surface of the colony. Image reconstruction indicated that these sheets were also precise mirror-image double layers, and thickness measurements obtained from thin sections were consistent with this finding. The sheets were absent when these mutant strains were grown without calcium, supporting other data that calcium is involved in attachment of the S-layer to a surface molecule and perhaps in subunit-subunit interactions. We propose that when the membrane is removed from S-layer fragments by detergents or the attachment-related surface molecule is absent, the attachment sites of the S-layer align precisely to form a double layer via a calcium interaction.     

Relevance of charged groups for the integrity of the S-layer from Bacillus coagulans E38-66 and for molecular interactions.

In this paper, the importance of charged amino and carboxyl groups for the integrity of the cell surface layer (S-layer) lattice from Bacillus coagulans E38-66 and for the self-assembly of the isolated subunits was investigated. Amidination of the free amino groups which preserved their positive net charge had no influence on both. On the other hand, acetylation and succinylation, which converted the amino groups into either neutral or negatively charged groups, and amidation of carboxyl groups were accompanied by the disintegration or at least by the loss of the regular structure of the S-layer lattice. Treatment of S-layer monolayers with the zero-length cross-linker carbodiimide led to the introduction of peptide bonds between activated carboxyl groups and amino groups from adjacent subunits. This clearly indicated that in the native S-layer lattice the charged groups are located closely enough for direct electrostatic interactions. Under disrupting conditions in which the S-layer polypeptide chains were unfolded, 58% of the Asx and Glx residues could be amidated, indicating that they occur in the free carboxylic acid form. As derived from chemical modification of monolayer self-assembly products, about 90% of the lysine and 70% of the aspartic and glutamic acid residues are aligned on the surface of the S-layer protein domains. This corresponded to 45 amino groups and to 63 carboxyl groups per S-layer subunit. Labelling experiments with macromolecules with different sizes and charges and adsorption studies with ion-exchange particles revealed a surplus of free carboxyl groups on the inner and on the outer faces of the S-layer lattice. Since the carboxyl groups on the outer S-layer face were accessible only for protein molecules significantly smaller then the S-layer protomers or for positively charged, thin polymer chains extending from the surface of ion-exchange beads, the negatively charged sites must be located within indentations of the corrugated S-layer protein network. This was in contrast to the carboxyl groups on the inner S-layer face, which were found to be exposed on elevations of the S-layer protein domains (D. Pum, M. Sára, and U.B. Sleytr, J. Bacteriol. 171:5296-5303, 1989).     

S-layer-supported lipid membranes

Many prokaryotic organisms (archaea and bacteria) are covered by a regularly ordered surface layer (S-layer) as the outermost cell wall component. S-layers are built up of a single protein or glycoprotein species and represent the simplest biological membrane developed during evolution. Pores in S-layers are of regular size and morphology, and functional groups on the protein lattice are aligned in well-defined positions and orientations. Due to the high degree of structural regularity S-layers represent unique systems for studying the structure, morphogenesis, and function of layered supramolecular assemblies. Isolated S-layer subunits of numerous organisms are able to assemble into monomolecular arrays either in suspension, at air/water interfaces, on planar mono- and bilayer lipid films, on liposomes and on solid supports (e.g. silicon wafers). Detailed studies on composite S-layer/lipid structures have been performed with Langmuir films, freestanding bilayer lipid membranes, solid supported lipid membranes, and liposomes. Lipid molecules in planar films and liposomes interact via their head groups with defined domains on the S-layer lattice. Electrostatic interactions are the most prevalent forces. The hydrophobic chains of the lipid monolayers are almost unaffected by the attachment of the S-layer and no impact on the hydrophobic thickness of the membranes has been observed. Upon crystallization of a coherent S-layer lattice on planar and vesicular lipid membranes, an increase in molecular order is observed, which is reflected in a decrease of the membrane tension and an enhanced mobility of probe molecules within an S-layer-supported bilayer. Thus, the terminology 'semifluid membrane' has been introduced for describing S-layer-supported lipid membranes. The most important feature of composite S-layer/lipid membranes is an enhanced stability in comparison to unsupported membranes.     

Three-dimensional structure of the tetragonal surface layer of Sporosarcina ureae.

The three-dimensional structure of the regular surface layer of Sporosarcina ureae has been determined to a resolution of 1.7 nm by electron microscopy and image reconstruction. The S-layer has p4 symmetry, a lattice constant of 12.9 nm, and a minimum thickness of 6.6 nm. The reconstruction reveals a distinct domain structure: a massive core, arms connecting adjacent unit cells, and spurs which make contact at the subsidiary fourfold symmetry axes. In the z-direction the domains appear to be arranged in three planes, creating two entirely different surface reliefs. The S-layer has a complex pattern of pores and gaps that are 2 to 3 nm wide. In addition, the secondary-structure composition has been determined by infrared spectroscopy: about 35% of the polypeptide appears to have a beta-structure conformation.     

Structural research on surface layers: a focus on stability, surface layer homology domains, and surface layer-cell wall interactions

Surface layers (S-layers) from Bacteria and Archaea are built from protein molecules arrayed in a two-dimensional lattice, forming the outermost cell wall layer in many prokaryotes. In almost half a century of S-layer research a wealth of structural, biochemical, and genetic data have accumulated, but it has not been possible to correlate sequence data with the tertiary structure of S-layer proteins to date. In this paper, some highlights of structural aspects of archaeal and bacterial S-layers that allow us to draw some conclusions on molecular properties are reviewed. We focus on the structural requirements for the extraordinary stability of many S-layer proteins, the structural and functional aspects of the S-layer homology domain found in S-layers, extracellular enzymes and related functional proteins, and outer membrane proteins, and the molecular interactions of S-layer proteins with other cell wall components. Finally, the perspectives and requirements for structural research on S-layers, which indicate that the investigation of isolated protein domains will be a prerequisite for solving S-layer structures at atomic resolution, are discussed.     

The S-layer from Bacillus stearothermophilus DSM 2358 functions as an adhesion site for a high-molecular-weight amylase.

The S-layer lattice from Bacillus stearothermophilus DSM 2358 completely covers the cell surface and exhibits oblique symmetry. During growth of B. stearothermophilus DSM 2358 on starch medium, three amylases with molecular weights of 58,000, 98,000, and 184,000 were secreted into the culture fluid, but only the high-molecular-weight enzyme was found to be cell associated. Studies of interactions between cell wall components and amylases revealed no affinity of the high-molecular-weight amylase to isolated peptidoglycan. On the other hand, this enzyme was always found to be associated with S-layer self-assembly products or S-layer fragments released during preparation of spheroplasts by treatment of whole cells with lysozyme. The molar ratio of S-layer subunits to the bound amylase was approximately 8:1, which corresponded to one enzyme molecule per four morphological subunits. Immunoblotting experiments with polyclonal antisera against the high-molecular-weight amylase revealed a strong immunological signal in response to the enzyme but no cross-reaction with the S-layer protein or the smaller amylases. Immunogold labeling of whole cells with anti-amylase antiserum showed that the high-molecular-weight amylase is located on the outer face of the S-layer lattice. Because extraction of the amylase was possible without disintegration of the S-layer lattice into its constituent subunits, it can be excluded that the enzyme is incorporated into the crystal lattice and participates in the self-assembly process. Affinity experiments strongly suggest the presence of a specific recognition mechanism between the amylase molecules and S-layer protein domains either exposed on the outermost surface or inside the pores. In summary, results obtained in this study confirmed that the S-layer protein from B. stearothermophilus DSM 2358 functions as an adhesion site for a high-molecular-weight amylase.     

Oligomerization states of the association domain and the holoenyzme of Ca2+/CaM kinase II

Ca2+/calmodulin activated protein kinase II (CaMKII) is an oligomeric protein kinase with a unique holoenyzme architecture. The subunits of CaMKII are bound together into the holoenzyme by the association domain, a C-terminal region of approximately 140 residues in the CaMKII polypeptide. Single particle analyses of electron micrographs have suggested previously that the holoenyzme forms a dodecamer that contains two stacked 6-fold symmetric rings. In contrast, a recent crystal structure of the isolated association domain of mouse CaMKIIalpha has revealed a tetradecameric assembly with two stacked 7-fold symmetric rings. In this study, we have determined the crystal structure of the Caenorhabditis elegans CaMKII association domain and it too forms a tetradecamer. We also show by electron microscopy that in its fully assembled form the CaMKII holoenzyme is a dodecamer but without the kinase domains, either from expression of the isolated association domain in bacteria or following their removal by proteolysis, the association domains form a tetradecamer. We speculate that the holoenzyme is held in its 6-fold symmetric state by the interactions of the N-terminal approximately 1-335 residues and that the removal of this region allows the association domain to convert into a more stable 7-fold symmetric form.     

An S-layer heavy chain camel antibody fusion protein for generation of a nanopatterned sensing layer to detect the prostate-specific antigen by surface plasmon resonance technology

The bacterial cell surface layer (S-layer) protein of Bacillus sphaericus CCM 2177 assembles into a square lattice structure and recognizes a distinct type of secondary cell wall polymer (SCWP) as the proper anchoring structure in the rigid cell wall layer. For generating a nanopatterned sensing layer with high density and well defined distance of the ligand on the outermost surface, an S-layer fusion protein incorporating the sequence of a variable domain of a heavy chain camel antibody directed against prostate-specific antigen (PSA) was constructed, produced, and recrystallized on gold chips precoated with thiolated SCWP. The S-layer protein moiety consisted of the N-terminal part which specifically recognized the SCWP as binding site and the self-assembly domain. The PSA-specific variable domain of the camel heavy chain antibody was selected by several rounds of panning from a phage display library of an immunized dromedary, and was produced by heterologous expression in Escherichia coli. For construction of the S-layer fusion protein, the 3'-end of the sequence encoding the C-terminally truncated form rSbpA(31)(-)(1068) was fused via a short linker to the 5'-end of the sequence encoding cAb-PSA-N7. The S-layer fusion protein had retained the ability to self-assemble into the square lattice structure. According to the selected fusion site in the SbpA sequence, the cAb-PSA-N7 moiety remained located on the outer surface of the protein lattice. After recrystallization of the S-layer fusion protein on gold chips precoated with thiolated SCWP, the monomolecular protein lattice was exploited as sensing layer in surface plasmon resonance biochips to detect PSA.     

The S-Layer Proteins of Two Bacillus stearothermophilus Wild-Type Strains Are Bound via Their N-Terminal Region to a Secondary Cell Wall Polymer of Identical Chemical Composition

Two Bacillus stearothermophilus wild-type strains were investigated regarding a common recognition and binding mechanism between the S-layer protein and the underlying cell envelope layer. The S-layer protein from B. stearothermophilus PV72/p6 has a molecular weight of 130,000 and assembles into a hexagonally ordered lattice. The S-layer from B. stearothermophilus ATCC 12980 shows oblique lattice symmetry and is composed of subunits with a molecular weight of 122,000. Immunoblotting, peptide mapping, N-terminal sequencing of the whole S-layer protein from B. stearothermophilus ATCC 12980 and of proteolytic cleavage fragments, and comparison with the S-layer protein from B. stearothermophilus PV72/p6 revealed that the two S-layer proteins have identical N-terminal regions but no other extended structurally homologous domains. In contrast to the heterogeneity observed for the S-layer proteins, the secondary cell wall polymer isolated from peptidoglycan-containing sacculi of the different strains showed identical chemical compositions and comparable molecular weights. The S-layer proteins could bind and recrystallize into the appropriate lattice type on native peptidoglycan-containing sacculi from both organisms but not on those extracted with hydrofluoric acid, leading to peptidoglycan of the A1γ chemotype. Affinity studies showed that only proteolytic cleavage fragments possessing the complete N terminus of the mature S-layer proteins recognized native peptidoglycan-containing sacculi as binding sites or could associate with the isolated secondary cell wall polymer, while proteolytic cleavage fragments missing the N-terminal region remained unbound. From the results obtained in this study, it can be concluded that S-layer proteins from B. stearothermophilus wild-type strains possess an identical N-terminal region which is responsible for anchoring the S-layer subunits to a secondary cell wall polymer of identical chemical composition.     

Dynamics in oxygen-induced changes in S-layer protein synthesis from Bacillus stearothermophilus PV72 and the S-layer-deficient variant T5 in continuous culture and studies of the cell wall composition.

Stable synthesis of the hexagonally ordered (p6) S-layer protein from the wild-type strain of Bacillus stearothermophilus PV72 could be achieved in continuous culture on complex medium only under oxygen-limited conditions when glucose was used as the sole carbon source. Depending on the adaptation of the wild-type strain to low oxygen supply, the dynamics in oxygen-induced changes in S-layer protein synthesis was different when the rate of aeration was increased to a level that allowed dissimilation of amino acids. If oxygen supply was increased at the beginning of continuous culture, synthesis of the p6 S-layer protein from the wild-type strain (encoded by the sbsA gene) was immediately stopped and replaced by that of a new type of S-layer protein (encoded by the sbsB gene) which assembled into an oblique (p2) lattice. In cells adapted to a prolonged low oxygen supply, first, low-level p2 S-layer protein synthesis and second, synchronous synthesis of comparable amounts of both types of S-layer proteins could be induced by stepwise increasing the rate of aeration. The time course of changes in S-layer protein synthesis was followed up by immunogold labelling of whole cells. Synthesis of the p2 S-layer protein could also be induced in the p6-deficient variant T5. Hybridization data obtained by applying the radiolabelled N-terminal and C-terminal sbsA fragments and the N-terminal sbsB fragment to the genomic DNA of all the three organisms indicated that changes in S-layer protein synthesis were accompanied by chromosomal rearrangement. Chemical analysis of peptidoglycan-containing sacculi and extraction and recrystallization experiments revealed that at least for the wild-type strain, a cell wall polymer consisting of N-acetylglucosamine and glucose is responsible for binding of the p6 S-layer protein to the rigid cell wall layer.     

Cell wall of Thermoanaerobacterium thermosulfurigenes EM1: isolation of its components and attachment of the xylanase XynA

Thermoanaerobacterium thermosulfurigenes EM1 has a gram-positive type cell wall completely covered by a surface layer (S-layer) with hexagonal lattice symmetry. The components of the cell envelope were isolated, and the S-layer protein was purified and characterized. S-layer monomers assembled in vitro into sheets with the same hexagonal symmetry as in vivo. Monosaccharide analysis revealed that the S-layer is associated with fucose, rhamnose, mannosamine, glucosamine, galactose, and glucose. The N-terminal 31 amino acid residues of the S-layer protein showed significant similarity to SLH (S-layer homology) domains found in S-layer proteins of different bacteria and in the exocellular enzymes pullulanase, polygalacturonate hydrolase, and xylanase of T. thermosulfurigenes EM1. The xylanase from T. thermosulfurigenes EM1 was copurified with the S-layer protein during isolation of cell wall components. Since SLH domains of some structural proteins have been shown to anchor these proteins noncovalently to the cell envelope, we propose a common anchoring mechanism for the S-layer protein and exocellular enzymes via their SLH domains in the peptidoglycan-containing layer of T. thermosulfurigenes EM1. Received: 23 October 1998 / Accepted: 21 December 1998     

A new group of parasporal inclusions encoded by the S-layer gene of Bacillus thuringiensis

Bacillus thuringiensis produces various groups of active proteins, such as Cyt, Vip and Parasporin, in addition to the Cry protein. In this study we show S-layer proteins to be a new group of parasporal inclusions of B. thuringiensis . The S-layer consists of a two-dimensional lattice structure and is the outermost component of many archaeobacteria and eubacteria. The parasporal inclusion of B. thuringiensis strain CTC was found to be not a typical crystal protein encoded by the cry gene, but a proteinaceous inclusion encoded by the S-layer gene. Furthermore, the CTC-like strains (with their parasporal inclusions coded by the S-layer gene) are widely distributed and accounted for 25.4% of the B. thuringiensis strains tested. These strains constitue a new group of parasporal inclusions encoded by the S-layer gene of B. thuringiensis and shed new light on B. thuringiensis nontoxic strains.     

S-layer-coated liposomes as a versatile system for entrapping and binding target molecules

In the present study, unilamellar liposomes coated with the crystalline bacterial cell surface layer (S-layer) protein of Bacillus stearothermophilus PV72/p2 were used as matrix for defined binding of functional molecules via the avidin- or streptavidin-biotin bridge. The liposomes were composed of dipalmitoyl phosphatidylcholine, cholesterol and hexadecylamine in a molar ratio of 10:5:4 and they had an average size of 180 nm. For introducing specific functions into the S-layer lattice without affecting substances encapsulated within the liposomes, crosslinking and activation reagents had to be identified which did not penetrate the liposomal membrane. Among different reagents, a hydrophilic dialdehyde generated by periodate cleavage of raffinose and a sulfo-succinimide activated dicarboxylic acid were found to be impermeable for the liposomal membrane. Both reagents completely crosslinked the S-layer lattice without interfering with its regular structure. Biotinylation of S-layer-coated liposomes was achieved by coupling p-diazobenzoyl biocytin which preferably reacts with the phenolic residue of tyrosine or with the imidazole ring of histidine. By applying this method, two biotin residues accessible for subsequent avidin binding were introduced per S-layer subunit. As visualized by labeling with biotinylated ferritin, an ordered monomolecular layer of streptavidin was formed on the surface of the S-layer-coated liposomes. As a second model system, biotinylated anti-human IgG was attached via the streptavidin bridge to the biotinylated S-layer-coated liposomes. The biological activity of the bound anti-human IgG was confirmed by ELISA.     

The tetragonal surface layer of Clostridium aceticum: three-dimensional structure and comparison with the hexagonal layer of Clostridium thermohydrosulfuricum

The regular surface layer (S-layer) of Clostridium aceticum has been isolated and the three-dimensional structure determined to a resolution of 2.0 nm from tilt series of negatively stained preparations. It has tetragonal symmetry with a lattice constant of 12 nm and a thickness of 6 nm; there are probably 4 protein monomers per unit cell. A large proportion of the protein is concentrated in massive "cores" at the major four-fold axes which are situated towards the inner surface of the layer. From these cores, delicate arms extend towards the minor four-fold axes, where secondary connectivity is established near the exterior surface. When viewed from the outside, each of the cores appears to have a large central depression, rather than a true "pore". Since this general pattern of mass distribution is shared by the hexagonal S-layer of Clostridium thermohydrosulfuricum, some consideration has been given to the possible evolutionary steps leading to changes in symmetry. From modelling experiments, it is evident that the change from four-fold to six-fold symmetry in this instance could be accomplished simply by the loss of a structural "domain" from the protomer.     

Localized insertion of new S-layer during growth of Bacillus stearothermophilus strains

Bacillus stearothermophilus strains PV 72 and ATCC 12980 carry a crystalline surface layer (S-layer) with hexagonal (p6) and oblique (p2) symmetry, respectively. Sites of insertions of new subunits into the regular lattice during cell growth have been determined by the indirect fluorescent antibody technique and the protein A/colloidal gold technique.During S-layer growth on both bacillus strains the following common features were noted: 1. shedding of intact S-layer or turnover of individual subunits was not seen; 2. new S-layer was deposited in helically-arranged bands over the cylindrical surface of the cell at a pitch angle related to the orientation of the lattice vectors of the crystalline array; 3. little or no S-layer was inserted into pre-existing S-layer at the poles, and 4. septal regions and, subsequently, newly formed cell poles were covered with new S-layer protein.     

Generation of a functional monomolecular protein lattice consisting of an s-layer fusion protein comprising the variable domain of a camel heavy chain antibody

Crystalline bacterial cell surface layer (S-layer) proteins are composed of a single protein or glycoprotein species. Isolated S-layer subunits frequently recrystallize into monomolecular protein lattices on various types of solid supports. For generating a functional protein lattice, a chimeric protein was constructed, which comprised the secondary cell wall polymer-binding region and the self-assembly domain of the S-layer protein SbpA from Bacillus sphaericus CCM 2177, and a single variable region of a heavy chain camel antibody (cAb-Lys3) recognizing lysozyme as antigen. For construction of the S-layer fusion protein, the 3'-end of the sequence encoding the C-terminally truncated form rSbpA(31)(-)(1068) was fused via a short linker to the 5'-end of the sequence encoding cAb-Lys3. The functionality of the fused cAb-Lys3 in the S-layer fusion protein was proved by surface plasmon resonance measurements. Dot blot assays revealed that the accessibility of the fused functional sequence for the antigen was independent of the use of soluble or assembled S-layer fusion protein. Recrystallization of the S-layer fusion protein into the square lattice structure was observed on peptidoglycan-containing sacculi of B. sphaericus CCM 2177, on polystyrene or on gold chips precoated with thiolated secondary cell wall polymer, which is the natural anchoring molecule for the S-layer protein in the bacterial cell wall. Thereby, the fused cAb-Lys3 remained located on the outer S-layer surface and accessible for lysozyme binding. Together with solid supports precoated with secondary cell wall polymers, S-layer fusion proteins comprising rSbpA(31)(-)(1068) and cAbs directed against various antigens shall be exploited for building up monomolecular functional protein lattices as required for applications in nanobiotechnology.     

Surface display of foreign epitopes on the Lactobacillus brevis S-layer

So far, the inability to establish viable Lactobacillus surface layer (S-layer) null mutants has hampered the biotechnological applications of Lactobacillus S-layers. In this study, we demonstrate the utilization of Lactobacillus brevis S-layer subunits (SlpA) for the surface display of foreign antigenic epitopes. With an inducible expression system, L. brevis strains producing chimeric S-layers were obtained after testing of four insertion sites in the slpA gene for poliovirus epitope VP1, that comprises 10 amino acids. The epitope insertion site allowing the best surface expression was used for the construction of an integration vector carrying the gene region encoding the c-Myc epitopes from the human c-myc proto-oncogene, which is composed of 11 amino acids. A gene replacement system was optimized for L. brevis and used for the replacement of the wild-type slpA gene with the slpA-c-myc construct. A uniform S-layer, displaying on its surface the desired antigen in all of the S-layer protein subunits, was obtained. The success of the gene replacement and expression of the uniform SlpA-c-Myc recombinant S-layer was confirmed by PCR, Southern blotting MALDI-TOF mass spectrometry, whole-cell enzyme-linked immunosorbent assay, and immunofluorescence microscopy. Furthermore, the integrity of the recombinant S-layer was studied by electron microscopy, which indicated that the S-layer lattice structure was not affected by the presence of c-Myc epitopes. To our knowledge, this is the first successful expression of foreign epitopes in every S-layer subunit of a Lactobacillus S-layer while still maintaining the S-layer lattice structure.     

Implications of novel guide RNA features for the mechanism of RNA editing in Crithidia fasciculata.

We have determined the relative steady state concentration of the two Crithidia fasciculata guide (g)RNAs involved in editing the two domains of mRNAs for NADH dehydrogenase (ND) subunit 7. We found that, although there was an 8-fold difference between the molar ratio of these two gRNAs relative to the (pre)-mRNA, the two domains are edited with a very similar frequency (around 50%). Also, for the editing of a given domain, many gRNA species exist with the same 5' end but with a different 3' uridylation site. Approximately 20% of these short gRNAs do not contain the information required for editing a complete domain, which may explain the high incidence of partially edited RNAs. Remarkably, genomically encoded Us are missing from two sites of a few of the gRNAs involved in editing apocytochrome b RNA. We speculate that these species are created by editing-like events. Both the short and complete forms of the ND7 gRNAs are found in chimeric molecules, in which the gRNA is covalently linked via its 3'-terminus to an editing site of pre-edited ND7 RNA. Some features of the chimeric molecules are at odds with current models of RNA editing: (i) U residues are completely absent from the connecting sequence of a number of these molecules, (ii) the ND7 gRNAs are frequently hooked up to the wrong editing domain of ND7 RNA, although other gRNAs are not found at these positions and (iii) in some chimeric molecules the gRNA appears to be linked to the 5' end of pre-edited RNA.