Reaction of vascular adhesion protein-1 (VAP-1) with primary amines: mechanistic insights from isotope effects and quantitative structure-activity relationships

Human vascular adhesion protein-1 (VAP-1) is an endothelial copper-dependent amine oxidase involved in the recruitment and extravasation of leukocytes at sites of inflammation. VAP-1 is an important therapeutic target for several pathological conditions. We expressed soluble VAP-1 in HEK293 EBNA1 cells at levels suitable for detailed mechanistic studies with model substrates. Using the model substrate benzylamine, we analyzed the steady-state kinetic parameters of VAP-1 as a function of solution pH. We found two macroscopic pK(a) values that defined a bell-shaped plot of turnover number k(cat,app) as a function of pH, representing ionizable groups in the enzyme-substrate complex. The dependence of (k(cat)/K(m))(app) on pH revealed a single pK(a) value (～9) that we assigned to ionization of the amine group in free benzylamine substrate. A kinetic isotope effect (KIE) of 6 to 7.6 on (k(cat)/K(m))(app) over the pH range of 6 to 10 was observed with d(2)-benzylamine. Over the same pH range, the KIE on k(cat) was found to be close to unity. The unusual KIE values on (k(cat)/K(m))(app) were rationalized using a mechanistic scheme that includes the possibility of multiple isotopically sensitive steps. We also report the analysis of quantitative structure-activity relationships (QSAR) using para-substituted protiated and deuterated phenylethylamines. With phenylethylamines we observed a large KIE on k(cat,app) (8.01 ± 0.28 with phenylethylamine), indicating that C-H bond breakage is limiting for 2,4,5-trihydroxyphenylalanine quinone reduction. Poor correlations were observed between steady-state rate constants and QSAR parameters. We show the importance of combining KIE, QSAR, and structural studies to gain insight into the complexity of the VAP-1 steady-state mechanism.     

The kinetic basis of a general method for the investigation of active site content of enzymes and catalytic antibodies: first-order behaviour under single-turnover and cycling conditions

The theoretical foundation has been laid for the investigation of catalytic systems using first-order kinetics and for a general kinetic method of investigation of the active site content, E(a), of enzymes, catalytic antibodies, and other enzyme-like catalysts. The method involves a combination of steady-state and single-turnover kinetics to provide Vmax and Km and k(lim)(obs) and K(app)(m), respectively. The validity of the method is shown to remain valid for two extensions of the simple two-step enzyme catalysis model (a) when the catalyst preparation contains molecules (Eb) that bind substrate but fail to catalyse product formation and (b) when the catalyst itself binds substrate non-productively as well as productively. The former is a particularly serious complication for polyclonal catalytic antibodies and the latter a potential complication for all catalysts. For the simple model and for (b) Vmax/k(lim)(obs) provides the value of [Ea]T and for (a) its upper limit. This can be refined by consideration of the relative values of Km and the equilibrium dissociation constant of EbS. For the polyclonal catalytic antibody preparation investigated, the fact that K(app/m) > Km demonstrates for the first time the presence of a substrate-binding but non-catalytic component in a polyclonal preparation. First-order behaviour in catalytic systems occurs not only with a large excess of catalyst over substrate but also with lower catalyst/substrate ratios, including the equimolar condition, when K(app)(m) > [S]0, a phenomenon that is not widely appreciated.     

Unraveling the catalytic mechanism of nitrile hydratases

To elucidate a detailed catalytic mechanism for nitrile hydratases (NHases), the pH and temperature dependence of the kinetic constants k(cat) and K(m) for the cobalt-type NHase from Pseudonocardia thermophila JCM 3095 (PtNHase) were examined. PtNHase was found to exhibit a bell-shaped curve for plots of relative activity versus pH at pH 3.2-11 and was found to display maximal activity between pH 7.2 and 7.8. Fits of these data provided pK(E)(S1) and pK(E)(S2) values of 5.9 +/- 0.1 and 9.2 +/- 0.1 (k(cat)' = 130 +/- 1 s(-1)), respectively, and pK(E)(1) and pK(E)(2) values of 5.8 +/- 0.1 and 9.1 +/- 0.1 (k(cat)'/K(m)' = (6.5 +/- 0.1) x 10(3) s(-1) mm(-1)), respectively. Proton inventory studies indicated that two protons are transferred in the rate-limiting step of the reaction at pH 7.6. Because PtNHase is stable at 60 degrees C, an Arrhenius plot was constructed by plotting ln(k(cat)) versus 1/T, providing E(a) = 23.0 +/- 1.2 kJ/mol. The thermal stability of PtNHase also allowed DeltaH(0) ionization values to be determined, thus helping to identify the ionizing groups exhibiting the pK(E)(S1) and pK(E)(S2) values. Based on DeltaH(0)(ion) data, pK(E)(S1) is assigned to betaTyr(68), whereas pK(E)(S2) is assigned to betaArg(52), betaArg(157), or alphaSer(112) (NHases are alpha(2)beta(2)-heterotetramers). A combination of these data with those previously reported for NHases and synthetic model complexes, along with sequence comparisons of both iron- and cobalt-type NHases, allowed a novel catalytic mechanism for NHases to be proposed.     

Tyr115, gln165 and trp209 contribute to the 1, 2-epoxy-3-(p-nitrophenoxy)propane-conjugating activity of glutathione S-transferase cGSTM1-1

We investigated the epoxidase activity of a class mu glutathione S-transferase (cGSTM1-1), using 1,2-epoxy-3-(p-nitrophenoxy)propane (EPNP) as substrate. Trp209 on the C-terminal tail, Arg107 on the alpha4 helix, Asp161 and Gln165 on the alpha6 helix of cGSTM1-1 were selected for mutagenesis and kinetic studies. A hydrophobic side-chain at residue 209 is needed for the epoxidase activity of cGSTM1-1. Replacing Trp209 with histidine, isoleucine or proline resulted in a fivefold to 28-fold decrease in the k(cat)(app) of the enzyme, while a modest 25 % decrease in the k(cat)(app) was observed for the W209F mutant. The rGSTM1-1 enzyme has serine at the correponding position. The k(cat)(app) of the S209W mutant is 2. 5-fold higher than that of the wild-type rGSTM1-1. A charged residue is needed at position 107 of cGSTM1-1. The K(m)(app)(GSH) of the R107L mutant is 38-fold lower than that of the wild-type enzyme. On the contrary, the R107E mutant has a K(m)(app)(GSH) and a k(cat)(app) that are 11-fold and 35 % lower than those of the wild-type cGSTM1-1. The substitutions of Gln165 with Glu or Leu have minimal effect on the affinity of the mutants towards GSH or EPNP. However, a discernible reduction in k(cat)(app) was observed. Asp161 is involved in maintaining the structural integrity of the enzyme. The K(m)(app)(GSH) of the D161L mutant is 616-fold higher than that of the wild-type enzyme. In the hydrogen/deuterium exchange experiments, this mutant has the highest level of deuteration among all the proteins tested.We also elucidated the structure of cGSTM1-1 co-crystallized with the glutathionyl-conjugated 1, 2-epoxy-3-(p-nitrophenoxy)propane (EPNP) at 2.8 A resolution. The product found in the active site was 1-hydroxy-2-(S-glutathionyl)-3-(p-nitrophenoxy)propane, instead of the conventional 2-hydroxy isomer. The EPNP moiety orients towards Arg107 and Gln165 in dimer AB, and protrudes into a hydrophobic region formed by the loop connecting beta1 and alpha1 and part of the C-terminal tail in dimer CD. The phenoxyl ring forms strong ring stacking with the Trp209 side-chain in dimer CD. We hypothesize that these two conformations represent the EPNP moiety close to the initial and final stages of the reaction mechanism, respectively.     

Analyzing the catalytic mechanism of the Fe-type nitrile hydratase from Comamonas testosteroni Ni1

In order to gain insight into the catalytic mechanism of Fe-type nitrile hydratases (NHase), the pH and temperature dependence of the kinetic parameters k cat, K m, and k cat/ K m along with the solvent isotope effect were examined for the Fe-type NHase from Comamonas testosteroni Ni1 ( CtNHase). CtNHase was found to exhibit a bell-shaped curve for plots of relative activity vs pH over pH values 4-10 for the hydration of acrylonitrile and was found to display maximal activity at pH approximately 7.2. Fits of these data provided a p K ES1 value of 6.1 +/- 0.1, a p K ES2 value of 9.1 +/- 0.2 ( k' cat = 10.1 +/- 0.3 s (-1)), a p K E1 value of 6.2 +/- 0.1, and a p K E2 value of 9.2 +/- 0.1 ( k' cat/ K' m of 2.0 +/- 0.2 s (-1) mM (-1)). Proton inventory studies indicate that two protons are transferred in the rate-limiting step of the reaction at pH 7.2. Since CtNHase is stable to 25 degrees C, an Arrhenius plot was constructed by plotting ln( k cat) vs 1/ T, providing an E a of 33.3 +/- 1.5 kJ/mol. Delta H degrees of ionization values were also determined, thus helping to identify the ionizing groups exhibiting the p K ES1 and p K ES2 values. Based on Delta H degrees ion data, p K ES1 is assigned to betaTyr68 while p K ES2 is assigned to betaArg52, betaArg157, or alphaSer116 (NHases are alpha 2beta 2 heterotetramers). Given the strong similarities in the kinetic data obtained for both Co- and Fe-type NHase enzymes, both types of NHase enzymes likely hydrate nitriles in a similar fashion.     

Exploring the active site of tripeptidyl-peptidase II through studies of pH dependence of reaction kinetics

Tripeptidyl-peptidase II (TPP II) is a subtilisin-like serine protease which forms a large enzyme complex (>4MDa). It is considered a potential drug target due to its involvement in specific physiological processes. However, information is scarce concerning the kinetic characteristics of TPP II and its active site features, which are important for design of efficient inhibitors. To amend this, we probed the active site by determining the pH dependence of TPP II catalysis. Access to pure enzyme is a prerequisite for kinetic investigations and herein we introduce the first efficient purification system for heterologously expressed mammalian TPP II. The pH dependence of kinetic parameters for hydrolysis of two different chromogenic substrates, Ala-Ala-Phe-pNA and Ala-Ala-Ala-pNA, was determined for murine, human and Drosophila melanogaster TPP II as well as mutant variants thereof. The investigation demonstrated that TPP II, in contrast to subtilisin, has a bell-shaped pH dependence of k(cat)(app)/K(M) probably due to deprotonation of the N-terminal amino group of the substrate at higher pH. Since both the K(M) and k(cat)(app) are lower for cleavage of AAA-pNA than for AAF-pNA we propose that the former can bind non-productively to the active site of the enzyme, a phenomenon previously observed with some substrates for subtilisin. Two mutant variants, H267A and D387G, showed bell-shaped pH-dependence of k(cat)(app), possibly due to an impaired protonation of the leaving group. This work reveals previously unknown differences between TPP II orthologues and subtilisin as well as features that might be conserved within the entire family of subtilisin-like serine peptidases.     

Mechanism of Thermoanaerobacterium saccharolyticum beta-xylosidase: kinetic studies

The catalytic mechanism of Thermoanaerobacterium saccharolyticum beta-xylosidase (XynB) from family 39 of glycoside hydrolases has been subjected to a detailed kinetic investigation using a range of substrates. The enzyme exhibits a bell-shaped pH dependence of k(cat)/K(m), reflecting apparent pK(a) values of 4.1 and 6.8. The k(cat) and k(cat)/K(m) values for a series of aryl xylosides have been measured and used to construct two Br?nsted plots. The plot of log(k(cat)/K(m)) against the pK(a) of the leaving group reveals a significant correlation (beta(lg) = -0.97, r(2) = 0.94, n = 8), indicating that fission of the glycosidic bond is significantly advanced in the transition state leading to the formation of the xylosyl-enzyme intermediate. The large negative value of the slope indicates that there is relatively little proton donation to the glycosidic oxygen in the transition state. A biphasic, concave-downward plot of log(k(cat)) against pK(a) provides good evidence for a two-step double-displacement mechanism involving a glycosyl-enzyme intermediate. For activated leaving groups (pK(a) < 9), the breakdown of the xylosyl-enzyme intermediate is the rate-determining step, as indicated by the absence of any effect of the pK(a) of the leaving group on log(k(cat)) (beta(lg) approximately 0). However, a strong dependence of the first-order rate constant on the pK(a) value of relatively poor leaving groups (pK(a) > 9) suggests that the xylosylation step is rate-determining for these substrates. Support for the dexylosylation chemical step being rate-determining for activated substrates comes from nucleophilic competition experiments in which addition of dithiothreitol results in an increase in turnover rates. Normal secondary alpha-deuterium kinetic isotope effects ((alpha-D)(V) or (alpha-D)(V/K) = 1.08-1.10) for three different substrates of widely varying pK(a) value (5.15-9.95) have been measured and these reveal that the transition states leading to the formation and breakdown of the intermediate are similar and both steps involve rehybridization of C1 from sp(3) to sp(2). These results are consistent only with "exploded" transition states, in which the saccharide moiety bears considerable positive charge, and the intermediate is a covalent acylal-ester where C1 is sp(3) hybridized.     

On true and apparent Michaelis constants in enzymology. II. Is the equation k(m)app = k(s) + k)cat)/k(1) true for enzyme-catalysed reactions with activator participation?

The article is dedicated to analysis of equation which expresses apparent Michaelis constant K(m)app) of enzyme-catalysed reactions with activator participation by means of the substrate constant K(s) and rate constant of enzyme-substrate complex decomposition k(cat). It has been shown that although it is possible to record the mechanisms of such reactions as a scheme similar to Michaelis-Menten model and to derive equation of apparent Michaelis constant as K(m(app) = K(s) + k(cat)/k(1), but this approach cannot be used for investigation of all reactions with activator participation. The equation mentioned above is not obeyed in the general case, it may be true for some mechanisms only or under certain ratio of kinetic parameters of enzyme-catalysed reactions.     

A combined method for determining inhibition type, kinetic parameters, and inhibition coefficients for aerobic cometabolism of 1,1,1-trichloroethane by a butane-grown mixed culture.

A combined method for determining inhibition type, kinetic parameters, and inhibition coefficients is developed and presented. The method was validated by applying it to data obtained from batch kinetics of the aerobic cometabolism of 1,1,1-trichloroethane (1,1,1-TCA) by a butane-grown mixed culture. The maximum degradation rates (k(max)) and half-saturation coefficients (K(s)) were independently determined in single compound tests, and compared with those obtained from inhibition tests. The inhibition type was determined using direct linear plots at various substrate and inhibitor concentrations. Kinetic parameters (k(max) and K(s)) and inhibition coefficients (K(ic) and K(iu)) were determined by nonlinear least squares regression (NLSR) fits of the inhibition model determined from the direct linear plots. Initial guesses of the kinetic parameters for NLSR were determined from linearized inhibition equations that were derived from the correlations between apparent maximum degradation rates (k(app)(max)) and/or the apparent half-saturation coefficient (K(app)(s)) and the k(max), K(s), and inhibitor concentration (I(L)) for each inhibition equation. Two different inhibition types were indicated from the direct linear plots: competitive inhibition of 1,1,1-TCA on butane degradation, and mixed inhibition of 1,1,1-TCA transformation by butane. Good agreement was achieved between independently measured k(max) and K(s) values and those obtained from both NLSR and the linearized inhibition equations. The initial guesses of all the kinetic parameters determined from linear plots were in the range of the values estimated from NLSR analysis. Overall the results show that use of the direct linear plot method to identify the inhibition type, coupled with initial guesses from linearized plots for NLSR analysis, results in an accurate method for determining inhibition types and coefficients. Detailed studies with pure cultures and purified enzymes are needed to further demonstrate the utility of this method.     

Kinetics of cytochrome P450 2E1-catalyzed oxidation of ethanol to acetic acid via acetaldehyde.

The P450 2E1-catalyzed oxidation of ethanol to acetaldehyde is characterized by a kinetic deuterium isotope effect that increases K(m) with no effect on k(cat), and rate-limiting product release has been proposed to account for the lack of an isotope effect on k(cat) (Bell, L. C., and Guengerich, F. P. (1997) J. Biol. Chem. 272, 29643-29651). Acetaldehyde is also a substrate for P450 2E1 oxidation to acetic acid, and k(cat)/K(m) for this reaction is at least 1 order of magnitude greater than that for ethanol oxidation to acetaldehyde. Acetic acid accounts for 90% of the products generated from ethanol in a 10-min reaction, and the contribution of this second oxidation has been overlooked in many previous studies. The noncompetitive intermolecular kinetic hydrogen isotope effects on acetaldehyde oxidation to acetic acid ((H)(k(cat)/K(m))/(D)(k(cat)/K(m)) = 4.5, and (D)k(cat) = 1.5) are comparable with the isotope effects typically observed for ethanol oxidation to acetaldehyde, and k(cat) is similar for both reactions, suggesting a possible common catalytic mechanism. Rapid quench kinetic experiments indicate that acetic acid is formed rapidly from added acetaldehyde (approximately 450 min(-1)) with burst kinetics. Pulse-chase experiments reveal that, at a subsaturating concentration of ethanol, approximately 90% of the acetaldehyde intermediate is directly converted to acetic acid without dissociation from the enzyme active site. Competition experiments suggest that P450 2E1 binds acetic acid and acetaldehyde with relatively high K(d) values, which preclude simple tight binding as an explanation for rate-limiting product release. The existence of a rate-determining step between product formation and release is postulated. Also proposed is a conformational change in P450 2E1 occurring during the course of oxidation and the discrimination of P450 2E1 between acetaldehyde and its hydrated form, the gem-diol. This multistep P450 reaction is characterized by kinetic control of individual reaction steps and by loose binding of all ligands.     

Characterization of the catalytically active Mn(II)-loaded argE -encoded N -acetyl-l -ornithine deacetylase from Escherichia coli

The catalytically competent Mn(II)-loaded form of the argE-encoded N-acetyl-l-ornithine deacetylase from Escherichia coli (ArgE) was characterized by kinetic, thermodynamic, and spectroscopic methods. Maximum N-acetyl-l-ornithine (NAO) hydrolytic activity was observed in the presence of one Mn(II) ion with k _cat and K _m values of 550 s⁻¹ and 0.8 mM, respectively, providing a catalytic efficiency (k _cat/K _m) of 6.9 × 10⁵ M⁻¹ s⁻¹. The ArgE dissociation constant (K _d) for Mn(II) was determined to be 0.18 μM, correlating well with a value obtained by isothermal titration calorimetry of 0.30 μM for the first metal binding event and 5.3 μM for the second. An Arrhenius plot of the NAO hydrolysis for Mn(II)-loaded ArgE was linear from 15 to 55 °C, suggesting the rate-limiting step does not change as a function of temperature over this range. The activation energy, determined from the slope of this plot, was 50.3 kJ mol⁻¹. Other thermodynamic parameters were ΔG ^‡ = 58.1 kJ mol⁻¹, ΔH ^‡ = 47.7 kJ mol⁻¹, and ΔS ^‡ = –34.5 J mol⁻¹ K⁻¹. Similarly, plots of lnK _m versus 1/T were linear, suggesting substrate binding is controlled by a single step. The natural product, [(2S,3R)-3-amino-2-hydroxy-4-phenylbutanoyl]leucine (bestatin), was found to be a competitive inhibitor of ArgE with a K _i value of 67 μM. Electron paramagnetic resonance (EPR) data recorded for both [Mn(II)_(ArgE)] and [Mn(II)Mn(II)(ArgE)] indicate that the two Mn(II) ions form a dinuclear site. Moreover, the EPR spectrum of [Mn(II)Mn(II)(ArgE)] in the presence of bestatin indicates that bestatin binds to ArgE but does not form a μ-alkoxide bridge between the two metal ions.     

Chemical mechanism of a cysteine protease, cathepsin C, as revealed by integration of both steady-state and pre-steady-state solvent kinetic isotope effects

Cathepsin C, or dipeptidyl peptidase I, is a lysosomal cysteine protease of the papain family that catalyzes the sequential removal of dipeptides from the free N-termini of proteins and peptides. Using the dipeptide substrate Ser-Tyr-AMC, cathepsin C was characterized in both steady-state and pre-steady-state kinetic modes. The pH(D) rate profiles for both log k cat/ K m and log k cat conformed to bell-shaped curves for which an inverse solvent kinetic isotope effect (sKIE) of 0.71 +/- 0.14 for (D)( k cat/ K a) and a normal sKIE of 2.76 +/- 0.03 for (D) k cat were obtained. Pre-steady-state kinetics exhibited a single-exponential burst of AMC formation in which the maximal acylation rate ( k ac = 397 +/- 5 s (-1)) was found to be nearly 30-fold greater than the rate-limiting deacylation rate ( k dac = 13.95 +/- 0.013 s (-1)) and turnover number ( k cat = 13.92 +/- 0.001 s (-1)). Analysis of pre-steady-state burst kinetics in D 2O allowed abstraction of a normal sKIE for the acylation half-reaction that was not observed in steady-state kinetics. Since normal sKIEs were obtained for all measurable acylation steps in the presteady state [ (D) k ac = 1.31 +/- 0.04, and the transient kinetic isotope effect at time zero (tKIE (0)) = 2.3 +/- 0.2], the kinetic step(s) contributing to the inverse sKIE of (D)( k cat/ K a) must occur more rapidly than the experimental time frame of the transient kinetics. Results are consistent with a chemical mechanism in which acylation occurs via a two-step process: the thiolate form of Cys-234, which is enriched in D 2O and gives rise to the inverse value of (D)( k cat/ K a), attacks the substrate to form a tetrahedral intermediate that proceeds to form an acyl-enzyme intermediate during a proton transfer step expressing a normal sKIE. The subsequent deacylation half-reaction is rate-limiting, with proton transfers exhibiting normal sKIEs. Through derivation of 12 equations describing all kinetic parameters and sKIEs for the proposed cathepsin C mechanism, integration of both steady-state and pre-steady-state kinetics with sKIEs allowed the provision of at least one self-consistent set of values for all 13 rate constants in this cysteine protease's chemical mechanism. Simulation of the resulting kinetic profile showed that at steady state approximately 80% of the enzyme exists in an active-site cysteine-acylated form in the mechanistic pathway. The chemical and kinetic details deduced from this work provide a potential roadmap to help steer drug discovery efforts for this and other disease-relevant cysteine proteases.     

Staphylococcus aureus sortase transpeptidase SrtA: insight into the kinetic mechanism and evidence for a reverse protonation catalytic mechanism

The Staphylococcus aureus transpeptidase SrtA catalyzes the covalent attachment of LPXTG-containing virulence and colonization-associated proteins to cell-wall peptidoglycan in Gram-positive bacteria. Recent structural characterizations of staphylococcal SrtA, and related transpeptidases SrtB from S. aureus and Bacillus anthracis, provide many details regarding the active site environment, yet raise questions with regard to the nature of catalysis and active site cysteine thiol activation. Here we re-evaluate the kinetic mechanism of SrtA and shed light on aspects of its catalytic mechanism. Using steady-state, pre-steady-state, bisubstrate kinetic studies, and high-resolution electrospray mass spectrometry, revised steady-state kinetic parameters and a ping-pong hydrolytic shunt kinetic mechanism were determined for recombinant SrtA. The pH dependencies of kinetic parameters k(cat)/K(m) and k(cat) for the substrate Abz-LPETG-Dap(Dnp)-NH(2) were bell-shaped with pK(a) values of 6.3 +/- 0.2 and 9.4 +/- 0.2 for k(cat) and 6.2 +/- 0.2 and 9.4 +/- 0.2 for k(cat)/K(m). Solvent isotope effect (SIE) measurements revealed inverse behavior, with a (D)2(O)k(cat) of 0.89 +/- 0.01 and a (D)2(O)(k(cat)/K(m)) of 0.57 +/- 0.03 reflecting an equilibrium SIE. In addition, SIE measurements strongly implicated Cys184 participation in the isotope-sensitive rate-determining chemical step when considered in conjunction with an inverse linear proton inventory for k(cat). Last, the pH dependence of SrtA inactivation by iodoacetamide revealed a single ionization for inactivation. These studies collectively provide compelling evidence for a reverse protonation mechanism where a small fraction (ca. 0.06%) of SrtA is competent for catalysis at physiological pH, yet is highly active with an estimated k(cat)/K(m) of >10(5) M(-)(1) s(-)(1).     

Natural substrate assay for chitinases using high-performance liquid chromatography: a comparison with existing assays

The determination of kinetic parameters of chitinases using natural substrates is difficult due to low K(m) values, which require the use of low substrate concentrations that are hard to measure. Using the natural substrate (GlcNAc)(4), we have developed an assay for the determination of k(cat) and K(m)values of chitinases. Product concentrations as low as 0.5 microM were detected using normal-phase high-performance liquid chromatography (HPLC) with an amide 80 column (0.20 x 25 cm) using spectrophotometric detection at 210 nm. By means of this assay, k(cat) and K(m)values for chitinases A (ChiA) and B (ChiB) of Serratia marcescens were found to be 33+/-1s(-1) and 9+/-1 microM and 28+/-2s(-1) and 4+/-2 microM, respectively. For ChiB, these values were compared to those found with commonly used substrates where the leaving group is a (nonnatural) chromophore, revealing considerable differences. For example, assays with 4-methylumbelliferyl-(GlcNAc)(2) yielded a k(cat) value of 18+/-2s(-1) and a K(m) value of 30+/-6 microM. For two ChiB mutants containing a Trp --> Ala mutation in the +1 or +2 subsites, the natural substrate and the 4-methylumbelliferyl-(GlcNAc)(2) assays yielded rather similar K(m) values (5-fold difference at most) but showed dramatic differences in k(cat) values (up to 90-fold). These results illustrate the risk of using artificial substrates for characterization of chitinases and, thus, show that the new HPLC-based assay is a valuable tool for future chitinase research.     

Acid-base catalysis by UDP-galactose 4-epimerase: correlations of kinetically measured acid dissociation constants with thermodynamic values for tyrosine 149

The steady-state kinetic parameters for epimerization of UDP-galactose by UDP-galactose 4-epimerase from Escherichia coli (GalE), Y149F-GalE, and S124A-GalE have been measured as a function of pH. The deuterium kinetic isotope effects for epimerization of UDP-galactose-C-d(7) by these enzymes have also been measured. The results show that the activity of wild-type GalE is pH-independent in the pH range of 5.5-9.3, and there is no significant deuterium kinetic isotope effect in the reaction of UDP-galactose-C-d(7). It is concluded that the rate-limiting step for epimerization by wild-type GalE is not hydride transfer and must be either a diffusional process or a conformational change. Epimerization of UDP-galactose-C-d(7) by Y149F-GalE proceeds with a pH-dependent deuterium kinetic isotope effect on k(cat) of 2.2 +/- 0.4 at pH 6.2 and 1.1 +/- 0.5 at pH 8.3. Moreover, the plot of log k(cat)/K(m) breaks downward on the acid side with a fitted value of 7.1 for the pK(a). It is concluded that the break in the pH-rate profile arises from a change in the rate-limiting step from hydride transfer at low pH to a conformational change at high pH. Epimerization of UDP-galactose-C-d(7) by S124A-GalE proceeds with a pH-independent deuterium kinetic isotope effect on k(cat) of 2.0 +/- 0.2 between pH 6 and 9. Both plots of log k(cat) and log k(cat)/K(m) display pH dependence. The plot of log k(cat) versus pH breaks downward with a pK(a) of 6.35 +/- 0.10. The plot of log k(cat)/K(m) versus pH is bell-shaped, with fitted pK(a) values of 6.76 +/- 0.09 and 9.32 +/- 0.21. It is concluded that hydride transfer is rate-limiting, and the pK(a) of 6.7 for free S124A-GalE is assigned to Tyr 149, which displays the same value of pK(a) when measured spectrophotometrically in this variant. Acid-base catalysis by Y149F-GalE is attributed to Ser 124, which is postulated to rescue catalysis of proton transfer in the absence of Tyr 149. The kinetic pK(a) of 7.1 for free Y149F-GalE is lower than that expected for Ser 124, as proven by the pH-dependent kinetic isotope effect. Epimerization by the doubly mutated Y149F/S124A-GalE proceeds at a k(cat) that is lower by a factor of 10(7) than that of wild-type GalE. This low rate is attributed to the synergistic actions of Tyr 149 and Ser 124 in wild-type GalE and to the absence of any internal catalysis of hydride transfer in the doubly mutated enzyme.     

tRNA modification by S-adenosylmethionine:tRNA ribosyltransferase-isomerase. Assay development and characterization of the recombinant enzyme

The enzyme S-adenosylmethionine:tRNA ribosyltransferase-isomerase catalyzes the penultimate step in the biosynthesis of the hypermodified tRNA nucleoside queuosine (Q), an unprecedented ribosyl transfer from the cofactor S-adenosylmethionine (AdoMet) to a modified-tRNA precursor to generate epoxyqueuosine (oQ). The complexity of the reaction makes it an especially interesting mechanistic problem, and as a foundation for detailed kinetic and mechanistic studies we have carried out the basic characterization of the enzyme. Importantly, to allow for the direct measurement of oQ formation, we have developed protocols for the preparation of homogeneous substrates; specifically, an overexpression system was constructed for tRNA(Tyr) in an E. coli queA deletion mutant to allow for the isolation of large quantities of substrate tRNA, and [U-ribosyl-(14)C]AdoMet was synthesized. The enzyme shows optimal activity at pH 8.7 in buffers containing various oxyanions, including acetate, carbonate, EDTA, and phosphate. Unexpectedly, the enzyme was inhibited by Mg(2+) and Mn(2+) in millimolar concentrations. The steady-state kinetic parameters were determined to be K(m)(AdoMet) = 101.4 microm, K(m)(tRNA) = 1.5 microm, and k(cat) = 2.5 min(-1). A short minihelix RNA was synthesized and modified with the precursor 7-aminomethyl-7-deazaguanine, and this served as an efficient substrate for the enzyme (K(m)(RNA) = 37.7 microm and k(cat) = 14.7 min(-1)), demonstrating that the anticodon stem-loop is sufficient for recognition and catalysis by QueA.     

Evolutionary potential of (beta/alpha)8-barrels: in vitro enhancement of a "new" reaction in the enolase superfamily

The repertoire of reactions in the mechanistically diverse enolase superfamily is the result of divergent evolution that conserved enolization of a carboxylate anion substrate but allowed different overall reactions using different substrates. Details of the pathways for the natural evolutionary process are unknown, but the events reasonably involve (1) incremental increases in the level of the "new" reaction that would provide a selective advantage and (2) an accompanying loss of the "old" reaction catalyzed by the progenitor. In an effort to better understand the molecular processes of divergent evolution, the D297G mutant of the l-Ala-d/l-Glu epimerase (AEE) from Escherichia coli was designed so that it could bind the substrate for the o-succinylbenzoate synthase (OSBS) reaction and, as a result, catalyze that reaction [Schmidt, D. M. Z., Mundorff, E. C., Dojka, M., Bermudez, E., Ness, J. E., Govindarajan, S., Babbitt, P. C., Minshull, J., and Gerlt, J. A. (2003) Biochemistry 42, 8387-8393]. The AEE progenitor did not catalyze the OSBS reaction, but the D297G mutant catalyzed a low level of the OSBS reaction (k(cat), 0.013 s(-)(1); K(m), 1.8 mM; k(cat)/K(m), 7.4 M(-)(1) s(-)(1)) that was sufficient to permit anaerobic growth by an OSBS-deficient strain of E. coli; the level of the progenitor's natural AEE reaction was significantly diminished. Using random mutagenesis and an anaerobic metabolic selection, we now have identified the I19F substitution as an additional mutation that enhances both growth of the OSBS-deficient strain and the kinetic constants for the OSBS reaction (k(cat), 0.031 s(-)(1); K(m), 0.34 mM; k(cat)/K(m), 90 M(-)(1) s(-)(1)). Several other substitutions for Ile 19 also enhanced the level of the OSBS reaction. All of the substitutions substantially decreased the level of the AEE reaction from that possessed by the D297G progenitor. The changes in the kinetic constants for both the OSBS and AEE reactions are attributed to a readjustment of substrate specificity so that the substrate for the OSBS reaction is more productively presented to the conserved acid/base catalysts in the active site. These observations support our hypothesis that evolution of "new" functions in the enolase superfamily can occur simply by changes in specificity-determining residues.     

Solvent deuterium isotope effect on the oxidation of o-diphenols by tyrosinase

A solvent deuterium isotope effect on the catalytic affinity (K(m)) and rate constant (k(cat)) of tyrosinase in its action on 4-tert-butylcatechol (TBC) was observed. Both parameters decreased as the molar fraction of deuterated water in the medium increased, while the k(cat)/K(m) ratio remained constant. In a proton inventory study, the representation of k(cat)(f(n))/k(cat)(f(0)) and K(m)(f(n))/K(m)(f(0)) vs. n (atom fractions of deuterium) was linear, indicating that, of the four protons transferred from the two molecules of substrate and which are oxidized in one turnover, only one is responsible for the isotope effects. The fractionation factor of 0.64+/-0.02 contributed to identifying the possible proton acceptor. Possible mechanistic implications are discussed.     

Kinetic mechanism of an aldehyde reductase of Saccharomyces cerevisiae that relieves toxicity of furfural and 5-hydroxymethylfurfural

An effective means of relieving the toxicity of furan aldehydes, furfural (FFA) and 5-hydroxymethylfurfural (HMF), on fermenting organisms is essential for achieving efficient fermentation of lignocellulosic biomass to ethanol and other products. Ari1p, an aldehyde reductase from Saccharomyces cerevisiae, has been shown to mitigate the toxicity of FFA and HMF by catalyzing the NADPH-dependent conversion to corresponding alcohols, furfuryl alcohol (FFOH) and 5-hydroxymethylfurfuryl alcohol (HMFOH). At pH 7.0 and 25°C, purified Ari1p catalyzes the NADPH-dependent reduction of substrates with the following values (k(cat) (s(-1)), k(cat)/K(m) (s(-1)mM(-1)), K(m) (mM)): FFA (23.3, 1.82, 12.8), HMF (4.08, 0.173, 23.6), and dl-glyceraldehyde (2.40, 0.0650, 37.0). When acting on HMF and dl-glyceraldehyde, the enzyme operates through an equilibrium ordered kinetic mechanism. In the physiological direction of the reaction, NADPH binds first and NADP(+) dissociates from the enzyme last, demonstrated by k(cat) of HMF and dl-glyceraldehyde that are independent of [NADPH] and (K(ia)(NADPH)/k(cat)) that extrapolate to zero at saturating HMF or dl-glyceraldehyde concentration. Microscopic kinetic parameters were determined for the HMF reaction (HMF+NADPH?HMFOH+NADP(+)), by applying steady-state, presteady-state, kinetic isotope effects, and dynamic modeling methods. Release of products, HMFOH and NADP(+), is 84% rate limiting to k(cat) in the forward direction. Equilibrium constants, [NADP(+)][FFOH]/[NADPH][FFA][H(+)]=5600×10(7)M(-1) and [NADP(+)][HMFOH]/[NADPH][HMF][H(+)]=4200×10(7)M(-1), favor the physiological direction mirrored by the slowness of hydride transfer in the non-physiological direction, NADP(+)-dependent oxidation of alcohols (k(cat) (s(-1)), k(cat)/K(m) (s(-1)mM(-1)), K(m) (mM)): FFOH (0.221, 0.00158, 140) and HMFOH (0.0105, 0.000104, 101).