Surface enhanced Raman scattering of a lipid Langmuir monolayer at the air-water interface

Surface enhanced Raman spectra were recorded from a phospholipid monolayer directly at the air-water interface. We used an organized monolayer of negatively charged tetramyristoyl cardiolipins as a template for the electrochemical generation of silver deposits. This two-dimensional electrodeposition of silver under potentiostatic control was the substrate for enhancement of Raman spectra. We report the optimized conditions for the Raman enhancement, the microscopic observations of the deposits, and their characterization by atomic force microscopy. Laser excitation at 514.5 nm leads to intense and reproducible surface enhanced Raman scattering spectra recorded in situ from one monolayer of cardiolipin, using 0.5 mol % of 10N nonyl acridine orange or 5 mol % of acridine in the film, and demonstrates the possibility of estimating the pH at the metal/phospholipidic film interface.     

Effect of monolayer lipid charges on the structure and orientation of protein VAMP1 at the air-water interface

SNARE proteins are implicated in membrane fusion during neurotransmission and peptide hormone secretion. Relatively little is known about the molecular interactions of their trans- and juxtamembrane domains with lipid membranes. Here, we report the structure and the assembling behavior of one of the SNARE proteins, VAMP1/synaptobrevin1 incorporated in a lipid monolayer at an air-water interface which mimics the membrane environment. Our results show that the protein is extremely sensitive to surface pressure as well as the lipid composition. Monolayers of proteins alone or in the presence of the neutral phospholipid DMPC underwent structural transition from α-helix to β-sheet upon surface compression. In contrast, the anionic phospholipid DMPG inhibited this transition in a concentration-dependent manner. Moreover, the orientation of the proteins was highly sensitive to the charge density of the lipid layers. Thus, the structure of VAMP1 is clearly controlled by protein-lipid interactions.     

Interaction between polylysine monolayer and DNA at the air-water interface

The interaction of a polylysine amphiphile, which consists of a poly-L- or -D-lysine (1L or 1D) segment and two long alkyl chains at the C-terminus, with polynucleotides was studied with respect to the highly organized structure of polylysine assemblies on water. The results of surface pressure-area isotherm measurement showed that both of 1L and 1D formed stable monolayers on water in a neutral pH region. The secondary structure of polylysine segment for the surface monolayer was examined by means of circular dichroism and Fourier transform infrared spectroscopies. The helical structure was retained even at neutral pH, at which polylysine has been known to form a complete random coiled conformation in bulk solution. Protonated, positively charged and coiled 1L monolayer could interact electrostatically with guest polyanions including DNA in the subphase, and at the same time the conformation of the polylysine segment was converted from a random coil to an alpha-helix. Deprotonated, helical monolayers did not interact with single stranded polyadenylic acid, but with double stranded DNA. Double stranded DNA was found to interact more strongly with right-handed 1L monolayer than left-handed 1D monolayer. An obvious difference in the melting temperatures for these complexes was observed and discussed on the basis of difference in the interaction mode.     

Adsorption of actin at the air-water interface: a monolayer study

The intrinsic surface activity of the contractile protein actin has been determined from surface tension measurements using the Wilhelmy hanging-plate method. Actin, a very soluble protein, moves from the subphase to the air-water interface to make a film. In the absence of magnesium, actin is monomeric and is known as G-actin. During the compression the monomers change their conformation or orientation at the interface and they are then pushed reversibly into the subphase upon further compression. No collapse occurs. Actin monomers in the presence of magnesium become activated; at concentrations greater than some critical value, actin polymerizes to form filaments of F-actin. The actin filaments have a higher surface activity than the actin monomers either because they are more hydrophobic or because F-actin, a rigid polymer, is much more efficient at creating excluded volume. The actin filaments then form a rigid film at the interface that collapses when the surface area is decreased. At less than the critical concentration, the actin monomers are present in the subphase in their activated form. However, their concentration increases at the interface during film compression until the critical concentration is reached. The surface pressure isotherm in this case has the characteristics of a G-actin film at the beginning of the compression and of an F-actin film at the end of the compression process.     

Linear gramicidins at the air-water interface.

The behavior of four linear gramicidins, which differ by the nature of their 9, 11, 13, and 15 aromatic residues, together with a covalent "head to tail" retro GA-DAla-GA dimer, has been examined at the air-water interface. It is shown that all four "monomers" have almost the same molecular area, which is compatible with either a single-stranded or a double-stranded helical model, whereas it is suggested that retro GA-DAla-GA could adopt another conformation. The surface potential measurements agree with those of different groups of molecules characterized by their single-channel behaviors.     

Effects of chain unsaturation on the equation of state for lipid monolayers at the air-water interface.

An equation of state for lipid monolayers at the air-water interface is presented, which takes into account the effects of the conformation and the number and position of double bonds of the hydrocarbon chains. The total Hamiltonian of the monolayer is assumed to consist of three terms. Two of them are calculated exactly within the limitations of the formulation. These are the two-dimensional entropy of mixing of the lipid and water molecules at the surface and the conformational entropy of the chains using a model available from the literature. These two terms give rise to positive surface pressure. The third term, which includes all energies that are not amenable to calculation, was obtained as the difference between the sum of the two calculated terms and experimental data and is found to represent an approximately area-independent tension. The effects of chain unsaturation on the equation of state were modeled in the present theory in two ways; the chain bend caused by cis double bonds increases the minimal molecular area, and the double bond linkage on a chain decreases the degrees of freedom of the chain. Calculations revealed that the former is highly significant whereas the latter is negligible. The deduced equation of state reproduces experimental data with appropriate values for three parameters, which represent the collapse area, the overlap of adjacent chains, and the combined effects of the intra- and intermolecular interactions other than the surface mixing entropy and the chain conformational energy.     

Spontaneous formation of a monolayer membrane from sarcoplasmic reticulum at an air-water interface

Surface pressure was found to be produced spontaneously at the interface between air and a suspension containing fragmented sarcoplasmic reticulum (FSR) from rabbit white muscle. Large and stable surface pressure was formed only in a limited concentration range of FSR in the suspension and the pressure formation was proved to be an irreversible phenomenon, suggesting the formation of a monolayer membrane resulting from the disruption of FSR vesicles. Monolayer formation was directly confirmed by analyzing the components included in the membrane and by calculating the surface area occupied by these components. The monolayer included phospholipids, cholesterol and proteins, and appeared to originate from FSR vesicles since the molecular ratios of these components as well as the results of the SDS polyacrylamide gel electrophoresis were similar in both membranes. This phenomenon can be utilized as a method of monolayer preparation from biological membrane vesicles, and should be very useful for the reconstitution of planar biological membranes.     

Recombination of human erythrocyte apoprotein and lipid. I. Interaction of apoprotein and lipid at the air-water interface

The formation and stabilization of a complex between total erythrocyte apoprotein and monolayers of total erythrocyte lipid as measured by changes of surface pressure (Δπ) and rate of change of surface pressure (dπ/dt) was studied as a function of pH, ionic strength, and lipid surface pressure. Penetration of apoprotein into lipid monolayers was favored by conditions in which lipid and apoprotein were oppositely charged. Once the interaction was completed, the resultant surface complex was resistant to large changes in subphase pH and ionic strength as shown by the insensitivity of Δπ to these parameters. The dπ/dt, however, showed strong dependence on pH and ionic strength, but not on lipid surface pressure. A sharp decrease in dπ/dt around pH 3.5–4.5 is associated with the change in apoprotein charge from (+) to (?). Comparison of complex formation between apoprotein and bovine serum albumin, cytochrome c, and human hemoglobin suggests that erythrocyte apoprotein was specialized in its interaction with erythrocyte lipids. The data show that formation of an apoprotein-lipid complex at the air-water interface has both electrostatic and hydrophobic components. This contradicts results from other laboratories studying erythrocyte membrane recombination by bulk methods.     

Orientation of silk III at the air-water interface.

A threefold helical crystal structure of Bombyx mori silk fibroin has been observed in films prepared from aqueous silk fibroin solutions using the Langmuir Blodgett (LB) technique. The films were studied using a combination of transmission electron microscopy and electron diffraction techniques. Films prepared at a surface pressure of 16.7 mN/m have a uniaxially oriented crystalline texture, with the helical axis oriented perpendicular to the plane of the LB film. Films obtained from the air-water interface without compression have a different orientation, with the helical axes lying roughly in the plane of the film. In both cases the d-spacings observed in electron diffraction are the same and match a threefold helical model crystal structure, silk III, described in previous publications. Differences in the relative intensities of the observed reflections in both types of oriented samples, as compared to unoriented samples, allows estimations of orientation distributions and the calculations of orientation parameters. The orientation of the fibroin chain axis in the plane of the interfacial film for uncompressed samples is consistent with the amphiphilic behavior previously postulated to drive the formation of the threefold helical silk III conformation.     

A fluorescence approach of the determination of translational diffusion coefficients of lipids in phospholipid monolayer at the air-water interface

In the present work, it is shown that the photobleaching technique as well as experimentation based on fluorescence recovery after bleaching can be extended to monolayers spread at the air-water interface. A mathematical model is derived which allows the determination of translational diffusion coefficients of species diffusing in such a system. Using 12-(9-anthroyl)stearic acid (anthroylstearate) as a fluorescent probe, dispersed either in dipalmitoylphosphatidylcholine or in dipalmitoylphosphatidylglycerol in various conditions of subphase ionic composition and surface pressure of the monolayer, including phase transition domains, we are led to the following conclusions: 1. Anthroylstearate molecules seem to aggregate in 'microdomains' where their fluorescence properties remain unchanged regardless of the compression states of the host monolayer. 2. In any case, a break in the diffusion constants appears on compressing films of both dipalmitoylphosphatidylcholine and dipalmitoylphosphatidylglycerol. In particular, this break coincides with the liquid expanded to gel phase transition of these lipids when it occurs. 3. Diffusion of anthroylstearate in dipalmitoylphosphatidylglycerol depends strongly on the subphase ionic strength and on the nature of cations: Na+, Mg2+, Ca2+.     

Amyloid-beta-sheet formation at the air-water interface

An amyloid(1-40) solution rich in coil, turn, and alpha-helix, but poor in beta-sheet, develops monolayers with a high beta-sheet content when spread at the air-water interface. These monolayers are resistant to repeated compression-dilatation cycles and interaction with trifluoroethanol. The secondary structure motifs were detected by circular dichroism (CD) in solution and with infrared reflection-absorption spectroscopy (IRRAS) at the interface. Hydrophobic influences are discussed for the structure conversion in an effort to understand the completely unknown reason for the natural change of the normal prion protein cellular (PrP(C)) into the abnormal prion protein scrapie (PrP(Sc)).     

The effect of methylation of phosphatidylethanolamine on the behaviour of lipid monolayers at the air-water interface

Monolayers of DPPE and its N-methylated derivatives including DPPC have been investigated at 23 and 37 degrees C using a modified Langmuir-Wilhelmy surface balance. The monolayers have been subjected to dynamic compression and expansion, and some characteristics of the surfaces have been determined. The minimum surface tension attained by surfaces containing the lipids (maximum surface pressures sustained by the films) depended on the extent of methylation of the head group. Monolayers of DPPE or N-MeDPPE collapsed at surface tensions of 12-16 mN.m-1, whereas those containing N,N-diMeDPPE and DPPC could be compressed to near zero surface tension. The areas per molecule occupied by these lipids under high compression varied slightly and not systematically with head-group methylation. Monolayers containing mixtures of DPPC and DPPE were also studied under the same conditions. The monolayers showed some deviation from the behaviour expected if they were to have characteristics of ideally mixed systems. The minimum surface tensions attained suggested that monolayers containing 50 mol% or more DPPC might be further enriched during compression by some selective exclusion of the DPPE. At high surface pressures, some positive deviations in nominal areas per molecule from that expected for ideal mixing were observed in the monolayers made with 50 mol% or more DPPC. These deviations might be caused by packing disruptions associated with the explosion of lipid from the films.     

Effect of a diazafluoranthen derivative on phospholipases. A study at the air-water interface.

AC-3579 (2-N-methylpiperazinomethyl-1,3-diazafluoranthen 1-oxide) produces in rat hepatocytes a hypertrophy of the endoplasmic reticulum. Two possibilities that can explain this phenomenon are (1) that AC-3579 inactivates the phospholipases, and (2) that an AC-3579-lipid interaction hinders the enzymic activity. To demonstrate these hypotheses, a physicochemical model of biological membrane, the lipid-water interface, has been used. Dipalmitoyl DL-alpha-phosphatidyl-choline was spread at the air-water interface, the enzymes (phospholipase A or phospholipase C) dissolved in the aqueous phase. The enzymic reaction was first studied with and without AC-3579 dissolved in the aqueous phase; no enzymic inactivation was observed. However an AC-3579-lipid complex completely inhibited the enzymic reaction in the case of phospholipase A. An explanation is given in terms of steric hindrance to the enzyme-substrate.     

Incorporation of beta-lactoglobulin in a lipid/porphyrin monolayer at the air--water interface

A catanionic lipid/porphyrin monolayer was formed at the air-water interface by the tetra-anionic porphyrin, tetra-sodium-meso-tetra(4-sulfonatophenyl)porphine (TSPP), mixed with the cationic lipid dioctadecyldimethylammonium bromide (DODAB) in a 1:4 molar ratio. This binary mixture (TSPP/4DODAB) was used as the incorporation matrix of beta-lactoglobulin (betaLG). Binary and ternary systems (TSPP/4DODAB/zbetaLG, where z stands for the number of protein residues per TSPP) were characterized by surface pressure versus area (pi-A) measurements and by Brewster angle microscopy (BAM) observation at the air-water interface. Pi-A measurements and BAM images show that protein is incorporated in the expanded regime of the monolayer and is gradually expelled upon compression at high surface pressures. The successive compression-expansion cycles indicate that the protein under adsorbed to the floating film is reincorporated after the expansion of the monolayer. At low subphase pH, TSPP tends to aggregate decreasing the interaction with DODAB molecules. Electrostatic and hydrophobic interactions are responsible for the presence of betaLG at the interfacial film.     

Molecular dynamics study of a phospholipid monolayer at a water/triglyceride interface: towards lipid emulsion modelling

In order to mimic the surface of parenteral nutrition emulsion droplets, the first molecular dynamics simulation of a palmitoyloleoylphosphatidylcholine (POPC) monolayer at a water/triglyceride (trilinoleoylglycerol, LLL) interface was performed. Triglyceride influence was evaluated by comparing computed phospholipid properties to the ones in a similarly modelled hydrated POPC bilayer. As expected, polar head properties (molecular area, lipid hydration, headgroup orientation) were not affected by triglycerides. In contrast, slight differences were observed on phospholipid alkyl tail region (order parameter, diffusion, Van der Waals interactions). This first approach can reasonably be extended to a further more realistic multicomponent model of clinical nutrition emulsions.