Material and Energy Flows and Environmental Impacts of the Internet in Switzerland

The Internet leads to material and energy consumption as well as various environmental impacts on both the regional and global scale. Yet, assessments of the Internet's energy consumption and resulting greenhouse gas emissions are still rare, and assessments of material flows and further environmental impacts are virtually non‐existent. This article investigates material flows, the direct energy consumption during the use phase, as well as environmental impacts linked to the service, “Internet in Switzerland.” In our model, the service, Internet in Switzerland, is divided into various Internet participant categories. All devices used to access or provide Internet services are merged in a limited number of equipment families and, as such, included in an inventory of the existing infrastructure (stock). Based on this inventory, a material flow analysis (MFA) is performed, which includes the current stock as well as flows resulting from growth and disposal. The direct energy consumption for the operation of the infrastructure is quantified. Environmental impacts are calculated with a life cycle assessment approach, using the ecoinvent database and the software, SimaPro, applying four different methods. The MFA results in a 2009 stock of 98,100 tonnes. Approximately 4,130 gigawatt hours per year, or 7% of the total Swiss electricity consumption, were used in 2009 to operate the Swiss infrastructure. The environmental impacts caused during the production and use phases vary significantly depending on the assessment method chosen. The disposal phase had mainly positive impacts as a result of material recovery.     

Environmental Impact Assessment of Wood Use in Japan through 2050 Using Material Flow Analysis and Life Cycle Assessment

In this study, we used material flow analysis and life cycle assessment to quantify the environmental impacts and impact reductions related to wood consumption in Japan from 1970 to 2013. We then conducted future projections of the impacts and reductions until 2050 based on multiple future scenarios of domestic forestry, wood, and energy use. An impact assessment method involving characterization, damage assessment, and integration with a monetary unit was used, and the results were expressed in Japanese yen (JPY). We found that environmental impacts from paper consumption, such as climate change and urban air pollution, were significant and accounted for 56% to 83% of the total environmental impacts between 1970 and 2013. Therefore, reductions of greenhouse gas, nitrogen oxide, and sulfur oxide emissions from paper production would be an effective measure to reduce the overall environmental impacts. An increase in wood use for building construction, civil engineering, furniture materials, and energy production could lead to reductions of environmental impacts (via carbon storage, material substitution, and fuel substitution) amounting to 357 billion JPY in 2050, which is equivalent to 168% of the 2013 levels. Particularly, substitution of nonwooden materials, such as cement, concrete, and steel, with wood products in building construction could significantly contribute to impact reductions. Although an increase of wood consumption could reduce environmental impacts, such as climate change, resource consumption, and urban air pollution, increased wood consumption would also be associated with land‐use impacts. Therefore, minimizing land transformations from forest to barren land will be important.     

The Water Withdrawal Footprint of Energy Supply to Cities

Water footprints traditionally estimate water lost as a result of evapotranspiration (or otherwise unavailable for downstream uses) associated with producing a certain good, and the same embodied in trade across regions is used to estimate regional and national water footprints. These footprints, however, do not address risk posed to city energy supplies characterized by insufficient streamflow to support energy production, such as cooling water intake (e.g., withdrawals) at thermoelectric power plants. Water withdrawal intensity factors for producing goods and services are being developed at the national scale, but lack sufficient spatial resolution to address these types of water‐energy challenges facing cities. To address this need, this article presents a water withdrawal footprint for energy supply (WWFES) to cities and places it in the context of other water footprints defined in the literature. Analysis of electricity use versus electricity generation in 43 U.S. cities highlights the need for developing WWFES to estimate risks to transboundary city energy supplies resulting from water constraints. The magnitude of the WWFES is computed for Denver, Colorado, and compared to the city's direct use of water to offer perspective. The baseline WWFES for Denver is found to be 66% as large as all direct water uses in the city combined (mean estimate). Minimum, mean, and maximum estimates are computed to demonstrate sensitivity of the WWFES to selection of water withdrawal intensity factors. Finally, scenario analysis explores the effect of energy technology and energy policy choices in shaping the future water footprint of cities.     

Comparison of Tools for Quantifying the Environmental Performance of an Urban Territory

To support effective urban policies aimed at decreasing the environmental impacts of cities, it is important to develop robust tools for accounting those impacts. Environmentally extended input‐output analysis (EEIOA) is among the most used tools for this purpose, allowing the quantification of both direct and indirect impacts. Life cycle assessment (LCA) is also a holistic and comprehensive tool that accounts for direct and indirect impacts—but its application to cities is still very recent. This study aims at applying EEIOA and LCA to the municipality of Aveiro (Portugal) in order to compare the outcomes of the two tools in terms of total impacts (climate change and fossil fuel depletion) and hotspots (sectors/products contributing most to the impacts), to identify limitations and advantages of the tools when applied to Aveiro, and to illustrate how LCA can be applied to cities. The total impacts estimated with LCA and EEIOA were similar and the hotspots were also the same: transports, food, construction, and electricity. However, the relative contribution of some sectors was very different in the two tools due to methodological differences mainly in system boundaries, type of activities or products considered in each sector, and geographical coverage of impact data. This study concludes that the analyzed tools can provide complementary results to support decision making concerning urban planning and management.     

Life Cycle Impacts and Benefits of Wood along the Value Chain: The Case of Switzerland

Sustainable use of wood may contribute to coping with energy and material resource challenges. The goal of this study is to increase knowledge of the environmental effects of wood use by analyzing the complete value chain of all wooden goods produced or consumed in Switzerland. We start from a material flow analysis of current wood use in Switzerland. Environmental impacts related to the material flows are evaluated using life cycle assessment–based environmental indicators. Regarding climate change, we find an overall average benefit of 0.5 tonnes carbon dioxide equivalent per cubic meter of wood used. High environmental benefits are often achieved when replacing conventional heat production and energy‐consuming materials in construction and furniture. The environmental performance of wood is, however, highly dependent on its use and environmental indicators. To exploit the mitigation potential of wood, we recommend to (1) apply its use where there are high substitution benefits like the replacement of fossil fuels for energy or energy‐intensive building materials, (2) take appropriate measures to minimize negative effects like particulate matter emissions, and (3) keep a systems perspective to weigh effects like substitution and cascading against each other in a comprehensive manner. The results can provide guidance for further in‐depth studies and prospective analyses of wood‐use scenarios.     

Reducing Life Cycle Environmental Impacts of Waste Electrical and Electronic Equipment Recycling

Collection and treatment of waste from electrical and electronic equipment (WEEE) is regulated in the European Union by the WEEE Directive. Producers are responsible for take‐back and recycling of discarded equipment. Valuable materials are, however, at risk of “getting lost” in current processes. Thus, strategies to minimize losses are sought after. The material hygiene (MH) concept was introduced to address this issue. Structural features, which are important for the outcome of reuse, recovery, and recycling, were investigated in an earlier field study of discarded dishwashers. It was proposed that a prestep, manual removal of copper prior to shredding could increase the purity of recovered material fractions. This article builds on the field study and theoretical reasoning underlying the MH concept. Dishwashers are assumed to be designed for disassembly when the prestep is introduced. A limited life cycle assessment was performed to determine whether the proposed prestep may be environmentally beneficial in a life cycle perspective. Two alternatives were analyzed: Case 1: the current shredding process. Case 2: prestep removal of copper before shredding. Targeted disassembly prior to shredding may reduce the abiotic depletion and global warming potential in a life cycle perspective. The prestep results in increased copper recovery, but, more important, copper contamination of the recovered steel fractions is reduced. The results also highlight the importance of minimizing energy consumption in all process stages.     

Assessing the Environmental Impact of Water Consumption by Energy Crops Grown in Spain

The environmental impact of the water consumption of four typical crop rotations grown in Spain, including energy crops, was analyzed and compared against Spanish agricultural and natural reference situations. The life cycle assessment (LCA) methodology was used for the assessment of the potential environmental impact of blue water (withdrawal from water bodies) and green water (uptake of soil moisture) consumption. The latter has so far been disregarded in LCA. To account for green water, two approaches have been applied: the first accounts for the difference in green water demand of the crops and a reference situation. The second is a green water scarcity index, which measures the fraction of the soil‐water plant consumption to the available green water. Our results show that, if the aim is to minimize the environmental impacts of water consumption, the energy crop rotations assessed in this study were most suitable in basins in the northeast of Spain. In contrast, the energy crops grown in basins in the southeast of Spain were associated with the greatest environmental impacts. Further research into the integration of quantitative green water assessment in LCA is crucial in studies of systems with a high dependence on green water resources.     

Life Cycle Environmental and Cost Impacts of Using an Algal Turf Scrubber to Treat Dairy Wastewater

Using algae to simultaneously treat wastewater and produce energy products has potential environmental and economic benefits. This study evaluates the life cycle energy, greenhouse gas (GHG) emissions, eutrophication potential, and cost impacts of incorporating an algal turf scrubber (ATS) into a treatment process for dairy wastewater. A life cycle inventory and cost model was developed to simulate an ATS treatment system where harvested algae would be used to generate biogas for process heat and electricity generation. Modeling results show that using an ATS significantly reduces eutrophication impacts by reducing chemical oxygen demand, nitrogen, and phosphorus in the wastewater. With low water recirculation rates through the ATS and high algae productivity, inclusion of the ATS results in net energy displacement and a reduction of GHG emissions compared to a system with no ATS. However, if high water recirculation rates are used or if algae biosolids from the digester are dried, the system results in a net increase in energy consumption and GHG emissions. The life cycle treatment cost was estimated to be $1.42 USD per cubic meter of treated wastewater. At this cost, using an ATS would only be cost effective for dairies if they received monetary credits for improved water quality on the order of $3.83 per kilogram of nitrogen and $9.57 per kilogram of phosphorus through, for example, nutrient trading programs.     

Combined MFA-LCA for Analysis of Wastewater Pipeline Networks

Oslo's wastewater pipeline network has an aging stock of concrete, steel, and polyvinyl chloride (PVC) pipelines, which calls for a good portion of expenditures to be directed toward maintenance and investments in rehabilitation. The stock, as it is in 2008, is a direct consequence of the influx of pipelines of different sizes, lengths, and materials of construction into the system over the years. A material flow analysis (MFA) facilitates an analysis of the environmental impacts associated with the manufacture, installation, operation, maintenance, rehabilitation, and retirement of the pipelines. The forecast of the future flows of materials—which, again, is highly interlinked with the historic flows—provides insight into the likely future environmental impacts. This will enable decision makers keen on alleviating such impacts to think along the lines of eco-friendlier processes and technologies or simply different ways of doing business. Needless to say, the operation and maintenance phase accounts for the major bulk of emissions and calls for energy-efficient approaches to this phase of the life cycle, even as manufacturers strive to make their processes energy-efficient and attempt to include captive renewable energy in their total energy consumption. This article focuses on the life cycle greenhouse gas emissions associated with the wastewater pipeline network in the city of Oslo.     

Implementing a Dynamic Life Cycle Assessment Methodology with a Case Study on Domestic Hot Water Production

This work contributes to the development of a dynamic life cycle assessment (DLCA) methodology by providing a methodological framework to link a dynamic system modeling method with a time‐dependent impact assessment method. This three‐step methodology starts by modeling systems where flows are described by temporal distributions. Then, a temporally differentiated life cycle inventory (TDLCI) is calculated to present the environmental exchanges through time. Finally, time‐dependent characterization factors are applied to the TDLCI to evaluate climate‐change impacts through time. The implementation of this new framework is illustrated by comparing systems producing domestic hot water (DHW) over an 80‐year period. Electricity is used to heat water in the first system, whereas the second system uses a combination of solar energy and gas to heat an equivalent amount of DHW at the same temperature. This comparison shows that using a different temporal precision (i.e., monthly vs. annual) to describe process flows can reverse conclusions regarding which case has the best environmental performance. Results also show that considering the timing of greenhouse gas (GHG) emissions reduces the absolute values of carbon footprint in the short‐term when compared with results from the static life cycle assessment. This pragmatic framework for the implementation of time in DLCA studies is proposed to help in the development of the methodology. It is not yet a fully operational scheme, and efforts are still required before DLCA can become state of practice.     

Towards Productive Cities: Environmental Assessment of the Food‐Energy‐Water Nexus of the Urban Roof Mosaic

Cities are rapidly growing and need to look for ways to optimize resource consumption. Metropolises are especially vulnerable in three main systems, often referred to as the FEW (i.e., food, energy, and water) nexus. In this context, urban rooftops are underutilized areas that might be used for the production of these resources. We developed the Roof Mosaic approach, which combines life cycle assessment with two rooftop guidelines, to analyze the technical feasibility and environmental implications of producing food and energy, and harvesting rainwater on rooftops through different combinations at different scales. To illustrate, we apply the Roof Mosaic approach to a densely populated neighborhood in a Mediterranean city. The building‐scale results show that integrating rainwater harvesting and food production would avoid relatively insignificant emissions (13.9–18.6 kg CO₂ eq/inhabitant/year) in the use stage, but their construction would have low environmental impacts. In contrast, the application of energy systems (photovoltaic or solar thermal systems) combined with rainwater harvesting could potentially avoid higher CO₂ eq emissions (177–196 kg CO₂ eq/inhabitant/year) but generate higher environmental burdens in the construction phase. When applied at the neighborhood scale, the approach can be optimized to meet between 7% and 50% of FEW demands and avoid up to 157 tons CO₂ eq/year. This approach is a useful guide to optimize the FEW nexus providing a range of options for the exploitation of rooftops at the local scale, which can aid cities in becoming self‐sufficient, optimizing resources, and reducing CO₂ eq emissions.     

Environmental Assessment of Single‐Walled Carbon Nanotube Processes

The environmental assessment of nanomanufacturing during the initial process design phase should lead to the development of competitive, safe, and environmentally responsible engineering and commercialization. Given the potential benefits and concerns regarding the use of single‐walled carbon nanotubes (SWNTs), three SWNT production processes have been investigated to assess their associated environmental impacts. These processes include arc ablation (arc), chemical vapor deposition (CVD), and high‐pressure carbon monoxide (HiPco). Without consideration of the currently unknown impacts of SWNT dispersion or other health impacts, life cycle assessment (LCA) methodology is used to analyze the environmental impact and provide a baseline for the environmental footprint of each manufacturing process. Although the technical attributes of the product resulting from each process may not be fully comparable, this study presents comparisons that show that the life cycle impacts are dominated by energy, specifically the electricity used in production. Under base case yield conditions, HiPco shows the lowest environmental impact, while the arc process has the lowest impact under best case yield conditions.     

Tracking Construction Material over Space and Time: Prospective and Geo‐referenced Modeling of Building Stocks and Construction Material Flows

Construction material plays an increasingly important role in the environmental impacts of buildings. In order to investigate impacts of materials on a building level, we present a bottom‐up building stock model that uses three‐dimensional and geo‐referenced building data to determine volumetric information of material stocks in Swiss residential buildings. We used a probabilistic modeling approach to calculate future material flows for the individual buildings. We investigated six scenarios with different assumptions concerning per‐capita floor area, building stock turnover, and construction material. The Swiss building stock will undergo important structural changes by 2035. While this will lead to a reduced number in new constructions, material flows will increase. Total material inflow decreases by almost half while outflows double. In 2055, the total amount of material in‐ and outflows are almost equal, which represents an important opportunity to close construction material cycles. Total environmental impacts due to production and disposal of construction material remain relatively stable over time. The cumulated impact is slightly reduced for the wood‐based scenario. The scenario with more insulation material leads to slightly higher material‐related emissions. An increase in per‐capita floor area or material turnover will lead to a considerable increase in impacts. The new modeling approach overcomes the limitations of previous bottom‐up building models and allows for investigating building material flows and stocks in space and time. This supports the development of tailored strategies to reduce the material footprint and environmental impacts of buildings and settlements.     

Life Cycle Assessment of Water Supply Plans in Mediterranean Spain

Life cycle assessment (LCA) was used to compare the current water supply planning in Mediterranean Spain, the so‐called AGUA Programme, with its predecessor, the Ebro river water transfer (ERWT). Whereas the ERWT was based on a single interbasin transfer, the AGUA Programme excludes new transfers and focuses instead on different types of resources, including seawater and brackish water desalination and wastewater reuse, among others. The study includes not only water supply but the whole anthropic cycle of water, from water abstraction to wastewater treatment. In addition to standard LCA impact categories, a specific impact category focusing on freshwater resources is included, which takes into account freshwater scarcity in the affected water catchments. In most impact categories the AGUA Programme obtains similar or even lower impact scores than ERWT. Concerning impacts on freshwater resources, the AGUA Programme obtains an impact score 49% lower than the ERWT. Although the current water planning appears to perform better in many impact categories than its predecessor, this study shows that water supply in Spanish Mediterranean regions is substantially increasing its energy intensity and that Mediterranean basins suffer a very high level of water stress due to increasing demand and limited resources.     

Environmental Life Cycle Assessment of a Canned Sardine Product from Portugal

This study aims to assess the environmental impacts of canned sardines in olive oil, by considering fishing, processing, and packaging, using life cycle assessment (LCA) methodology. The case study concerns a product of a canning factory based in Portugal and packed in aluminum cans. It is the first LCA of a processed seafood product made with the traditional canning method. The production of both cans and olive oil are the most important process in the considered impact categories. The production of olives contributes to the high environmental load of olive oil, related to cultivation and harvesting phases. The production of aluminum cans is the most significant process for all impact categories, except ozone depletion potential and eutrophication potential, resulting from the high energy demand and the extraction of raw materials. To compare to other sardine products consumed in Portugal, such as frozen and fresh sardines, transport to the wholesaler and store was added. The environmental cost of canned sardines is almost seven times higher per kilogram of edible product. The main action to optimize the environmental performance of canned sardines is therefore to replace the packaging and diminish the olive oil losses as much as possible. Greenhouse gas emissions are reduced by half when plastic packaging is considered rather than aluminum. Frozen and fresh sardines represent much lower environmental impacts than canned sardines. Nevertheless, when other sardine products are not possible, it becomes feasible to use sardines for human consumption, preventing them from being wasted or used suboptimally as feed.     

Backlighting the European Indium Recycling Potentials

With increased understanding of the effects of human activities on the environment and added awareness of the increasing societal value of natural resources, researchers have begun to focus on the characterization of elemental cycles. Indium has captured significant attention due to the potential for supply shortages and nonexistent recycling at end of life. Such a combination of potentially critical features is magnified for countries that depend on imports of indium, notably many European countries. With the aims of analyzing the dynamics of material flows and of estimating the magnitude of secondary indium sources available for recycling, the anthropogenic indium cycle in Europe has been investigated by material flow analysis. The results showed that the region is a major consumer of finished goods containing indium, and the cumulative addition of indium in urban mines was estimated at about 500 tonnes of indium. We discuss these results from the perspective of closing the metal cycle in the region. Securing access to critical raw materials is a priority for Europe, but the preference for recycling metal urban mines risks to remain only theoretical for indium unless innovations in waste collection and processing unlock the development of technologies that are economically feasible and environmentally sustainable.     

Combining Material Flow Analysis,Life Cycle Assessment,and Multiattribute Utility Theory

Three assessment methods, material flow analysis (MFA), life cycle analysis (LCA), and multiattribute utility theory (MAUT) are systematically combined for supporting the choice of best end‐of‐life scenarios for polyethylene terephthalate (PET) waste in a municipality of a developing country. MFA analyzes the material and energy balance of a firm, a region, or a nation, identifying the most relevant processes; LCA evaluates multiple environmental impacts of a product or a service from cradle to grave; and MAUT allows for inclusion of other aspects along with the ecological ones in the assessment. We first systematically coupled MFA and LCA by defining “the service offered by the total PET used during one year in the region” as the functional unit. Inventory and impacts were calculated by multiplying MFA flows with LCA impacts per kilogram. We used MAUT to include social and economic aspects in the assessment. To integrate the subjective point of view of stakeholders in the MAUT, we normalized the environmental, social, and economic variables with respect to the magnitude of overall impacts or benefits in the country. The results show large benefits for recycling scenarios from all points of view and also provide information about waste treatment optimization. The combination of the three assessment methods offers a powerful integrative assessment of impacts and benefits. Further research should focus on data collection methods to easily determine relevant material flows. LCA impact factors specific to Colombia should be developed, as well as more reliable social indicators.     

Environmental Damage Assessment of Carbon Capture and Storage

An end‐point life cycle impact assessment is used to evaluate the damages of electricity generation from fossil fuel‐based power plants with carbon dioxide capture and storage (CCS) technology. Pulverized coal (PC), integrated gasification combined cycle (IGCC), and natural gas combined cycle (NGCC) power plants are assessed for carbon dioxide (CO₂) capture, pipeline transport, and storage in a geological formation. Results show that the CCS systems reduce the climate change‐related damages but increase the damages from toxicity, acidification, eutrophication, and resource consumption. Based on the currently available damage calculation methods, it is concluded that the benefit of reducing damage from climate change is larger than the increases in other damage categories, such as health effects from particulates or toxic chemicals. CCS significantly reduces the overall environmental damage, with a net reduction of 60% to 70% in human health damage and 65% to 75% in ecosystem damage. Most of the damage is due to fuel production and combustion processes. The energy and infrastructure demands of CCS cause increases in the depletion of natural resources by 33% for PC, 19% for IGCC, and 18% for NGCC power plants, mostly due to increased fossil fuel consumption.     

Dimensionality Reduction and Visualization of the Environmental Impacts of Domestic Appliances

There is an increasing worldwide concern about the problem of dealing with the waste electrical and electronic equipment (WEEE), given the high volume of appliances that are disposed of every day. In this article, an environmental evaluation of WEEE is performed that combines life cycle assessment (LCA) methodology and multivariate statistical techniques. Because LCA handles a large number of data in its different phases, when one is trying to uncover the structure of large multidimensional data sets, multivariate statistical techniques can provide useful information. In particular, principal‐component analysis and multidimensional scaling are two important dimension‐reducing tools that have been shown to be of help in understanding this type of complex multivariate data set. In this article, we use a variable selection method that reduces the number of categories for which the environmental impacts have to be computed; this step is especially useful when the number of impact categories or the number of products or processes to benchmark increases. We provide a detailed illustration showing how we have used the proposed approach to analyze and interpret the environmental impacts of different domestic appliances.     

The environmental impacts of operating an Antarctic research station

We present a life cycle assessment (LCA) of the operation of Casey Station in Antarctica. The LCA included quantifying material and energy flows, modeling of elementary flows, and subsequent environmental impacts. Environmental impacts were dominated by emissions associated with freight operations and electricity cogeneration. A participatory design approach was used to identify options to reduce environmental impacts, which included improving freight efficiency, reducing the temperature setpoint of the living quarters, and installing alternative energy systems. These options were then assessed using LCA, and have the potential to reduce environmental impacts by between 2% and 19.1%, depending on the environmental indicator.