An engineered minidomain containing an elastin turn exhibits a reversible temperature-induced IgG binding.

A two-helix version of the triple alpha-helical staphylococcal Protein A, previously shown to retain the Fc binding properties of protein A, has been engineered to contain an elastin sequence, GVPGVG, within the inter-helix turn. The original type I beta-turn was replaced with a beta-turn from the muscle protein elastin, which has an inverse temperature-induced folding transition. These "elastin mutants" had lost their helical structure, as measured by circular dichroism (CD), and exhibited a lower stability than the wild-type domains (T(m) reduced by about 48 degrees C) in 30% trifluoroethanol. For the wild-type domains, the amount of alpha-helix and the binding affinity for Fc decreased as the temperature was increased. In contrast, although the starting affinity was lower for the disulfide elastin-turn mutant, it exhibited a 21-fold improvement in affinity over the same temperature range. The melting curve for the elastin-turn minidomain showed cooperative behavior, as measured by the increase in CD-amplitude at 222 nm. The observed CD behavior is consistent with the formation of a type I beta-turn, exhibiting similar DeltaH and DeltaS values to those seen previously for short elastin peptides [Reiersen, H., Clarke, A. R., and Rees, A. R. (1998) J. Mol. Biol. 283, 255-264], and accounting for the increase in on-rate. This demonstrates that, when inserted into a stable globular protein, short elastin sequences have the ability to modify local structure and activity, by operating as temperature modulated switches.     

Sequence replacements in the central beta-turn of plastocyanin.

The role of beta-turns in dictating the structure of a beta-barrel protein is assessed by probing the tolerance of the central beta-turn of poplar plastocyanin to substitution by arbitrary sequences. Native plastocyanin binds copper and is colored bright blue. However, when the wild-type Pro47-Ser48-Gly49-Val50 turn sequence is replaced by arbitrary tetrapeptides, the vast majority (92/98 = 94%) of mutant proteins cannot fold into the native blue structure. Characterization of the colorless mutant proteins demonstrates that the majority of substitutions in this type II beta-turn disrupt the native structure severely. Gross structural changes are indicated by major differences in the CD spectra of the mutants relative to the wild-type protein, and by the much larger apparent size of mutant proteins in gel filtration experiments. These mutant proteins do not bind copper. Furthermore, Cys84 forms a disulfide bond readily in the colorless mutant proteins, indicating that it has moved away from the buried position it occupies in the native copper binding site and has become exposed. These results indicate that the central beta-turn in plastocyanin is not merely a default structure arising in response to the surrounding context; rather, sequence information in this turn plays an active role in dictating the location of a chain reversal in the beta-barrel structure. These findings are discussed in terms of their implications for the folding of natural proteins, as well as the design of de novo proteins.     

Critical role of beta-hairpin formation in protein G folding

Comparison of the folding mechanisms of proteins with similar structures but very different sequences can provide fundamental insights into the determinants of protein folding mechanisms. Despite very little sequence similarity, the approximately 60 residue IgG binding domains of protein G and protein L both consist of a single helix packed against a four-stranded sheet formed by two symmetrically disposed beta-hairpins. We demonstrate that, as in the case of protein L, one of the two beta-turns of protein G is formed and the other disrupted in the folding transition state. Unlike protein L, however, in protein G it is the second beta-turn that is formed in the folding transition state ensemble. Substitution of an Asp residue by Ala in protein G that eliminates an i,i+2 side chain-main chain hydrogen bond in the second beta-turn slows the folding rate approximately 20-fold but has virtually no effect on the unfolding rate. Taken together with previous results, these findings suggest that the presence of an intact beta-turn in the folding transition state is a consequence of the overall topology of protein L and protein G, but the particular hairpin that is formed is determined by the detailed interatomic interactions that determine the free energies of formation of the isolated beta-hairpins.     

Effect of salts on the stability and folding of staphylococcal nuclease

The stability and folding kinetics of wild-type and a mutant staphylococcal nuclease (SNase) at neutral pH are significantly perturbed by the presence of moderate to high concentrations of salts. Very substantial increases in stability toward thermal and urea denaturation were observed; for example, 0.4 M sodium sulfate increased the free energy of wild-type SNase by more than 2 kcal/mol. For the NCA SNase mutant, the presence of the salts abolished the cold denaturation observed at neutral pH with this variant, and substantially increased its stability. Significant effects of salts on the kinetics of refolding were also observed. For NCA SNase, the presence of the salts markedly increased the folding rates (up to 5-fold). On the other hand, chloride, in particular, substantially decreased the rate of folding of the wild-type protein. Since the rates of the slow phases due to proline isomerization were increased by salt, these steps must be coupled to conformational processes. Fluorescence energy transfer between the lone tryptophan (Trp140) and an engineered fluorescent acceptor at residue 64 revealed that the addition of a high concentration of KCl led to the formation of a transient folding intermediate not observed at lower salt concentrations, and in which residues 140 and 64 were much closer than in the native state. The salt-induced effects on the kinetics of folding are attributed to the enhanced stability of the transient folding intermediates. It is likely that the combination of the high net charge, due to the high isoelectric point, and the relatively low intrinsic hydrophobicity, leads to staphylococcal nuclease having only marginal stability at neutral pH. The salt-induced effects on the structure, stability, and kinetics of staphylococcal nuclease are attributed to the binding of counterions, namely, anions, resulting in minimization of intramolecular electrostatic repulsion. This leads to increased stability, more structure, and greater compactness, as observed. Consequently, localized electrostatic repulsion is present at neutral pH in SNase, probably contributing to its marginal stability. The results suggest that, in general, marginally stable globular proteins will be significantly stabilized by salts under conditions where they have a substantial net charge.     

Directed evolution of highly homologous proteins with different folds by phage display: implications for the protein folding code

To better understand how amino acid sequences specify unique tertiary folds, we have used random mutagenesis and phage display selection to evolve proteins with a high degree of sequence identity but different tertiary structures (homologous heteromorphs). The starting proteins in this evolutionary process were the IgG binding domains of streptococcal protein G (G(B)) and staphylococcal protein A (A(B)). These nonhomologous domains are similar in size and function but have different folds. G(B) has an alpha/beta fold, and A(B) is a three-helix bundle (3-alpha). IgG binding function is used to select for mutant proteins which retain the correct tertiary structure as the level of sequence identity is increased. A detailed thermodynamic analysis of the folding reactions and binding reactions for a pair of homologous heteromorphs (59% identical) is presented. High-resolution NMR structures of the pair are presented by He et al. [(2005) Biochemistry 44, 14055-14061]. Because the homologous but heteromorphic proteins are identical at most positions in their sequence, their essential folding signals must reside in the positions of nonidentity. Further, the thermodynamic linkage between folding and binding is used to assess the propensity of one sequence to adopt two unique folds.     

Beta-turn propensities as paradigms for the analysis of structural motifs to engineer protein stability.

The thermodynamic stability of a protein provides an experimental metric for the relationship of protein sequence and native structure. We have investigated an approach based on an analysis of the structural database for stability engineering of an immunoglobulin variable domain. The most frequently occurring residues in specific positions of beta-turn motifs were predicted to increase the folding stability of mutants that were constructed by site-directed mutagenesis. Even in positions in which different residues are conserved in immunoglobulin sequences, the predictions were confirmed. Frequently, mutants with increased beta-turn propensities display increased folding cooperativities, suggesting pronounced effects on the unfolded state independent of the expected effect on conformational entropy. We conclude that structural motifs with predominantly local interactions can serve as templates with which patterns of sequence preferences can be extracted from the database of protein structures. Such preferences can predict the stability effects of mutations for protein engineering and design.     

Identification of a talin-binding site in the integrin beta(3) subunit distinct from the NPLY regulatory motif of post-ligand binding functions. The talin n-terminal head domain interacts with the membrane-proximal region of the beta(3) cytoplasmic tail.

Following platelet aggregation, integrin alpha(IIb)beta(3) becomes associated with the platelet cytoskeleton. The conserved NPLY sequence represents a potential beta-turn motif in the beta(3) cytoplasmic tail and has been suggested to mediate the interaction of beta(3) integrins with talin. In the present study, we performed a double mutation (N744Q/P745A) in the integrin beta(3) subunit to test the functional significance of this beta-turn motif. Chinese hamster ovary cells were co-transfected with cDNA constructs encoding mutant beta(3) and wild type alpha(IIb). Cells expressing either wild type (A5) or mutant (D4) alpha(IIb)beta(3) adhered to fibrinogen; however, as opposed to control A5 cells, adherent D4 cells failed to spread, form focal adhesions, or initiate protein tyrosine phosphorylation. To investigate the role of the NPLY motif in talin binding, we examined the ability of the mutant alpha(IIb)beta(3) to interact with talin in a solid phase binding assay. Both wild type and mutant alpha(IIb)beta(3), purified by RGD affinity chromatography, bound to a similar extent to immobilized talin. Additionally, purified talin failed to interact with peptides containing the AKWDTANNPLYK sequence indicating that the talin binding domain in the integrin beta(3) subunit does not reside in the NPLY motif. In contrast, specific binding of talin to peptides containing the membrane-proximal HDRKEFAKFEEERARAK sequence of the beta(3) cytoplasmic tail was observed, and this interaction was blocked by a recombinant protein fragment corresponding to the 47-kDa N-terminal head domain of talin (rTalin-N). In addition, RGD affinity purified platelet alpha(IIb)beta(3) bound dose-dependently to immobilized rTalin-N, indicating that an integrin-binding site is present in the talin N-terminal head domain. Collectively, these studies demonstrate that the NPLY beta-turn motif regulates post-ligand binding functions of alpha(IIb)beta(3) in a manner independent of talin interaction. Moreover, talin was shown to bind through its N-terminal head domain to the membrane-proximal sequence of the beta(3) cytoplasmic tail.     

Solution structure of the amino acid sequence coded by the rarely expressed exon 26A of human elastin: the N-terminal region.

We previously reported the structural and biological properties of the C-terminal sequence (REGDPSSSQHLPSTPSSPRV) coded by the rarely expressed exon 26A of human elastin. It assumes a stable type II beta-turn structure spanning the REGD sequence and possesses chemotactic and immunological properties. Here the structural characterization of the sequence coded by this exon was completed. Nuclear magnetic resonance and circular dichroism studies on the N-terminal amino acid sequence (GADEGVRRSLSPELREGD) showed the presence of an alpha-helix within VRRSL and a type II beta-turn within SPEL. The smaller peptides GADEGVRRSLSP and LSPELREGD revealed structural features similar to those identified in the parent peptide. No beta-turn was found in the REGD sequence of these peptides and no chemotactic activity was detected, thereby demonstrating that this biological activity is conformation dependent. Structural studies on additional peptides such as LREGD, ELREGD and LSPELREGDPSS showed that the presence of a Glu residue two positions before the Arg residue inhibits the beta-turn formation in the REGD sequence.     

Folding of immunogenic peptide fragments of proteins in water solution. I. Sequence requirements for the formation of a reverse turn

A systematic examination by 1H nuclear magnetic resonance of the population of beta-turn-containing conformers in several series of short linear peptides in water solution has demonstrated a dependence on amino acid sequence which has important implications for initiation of protein folding. The peptides consist of a number of variants of the sequence Tyr-Pro-Tyr-Asp, the trans isomer of which was previously shown to contain a reverse turn in water. Two-dimensional rotating-frame nuclear Overhauser effect spectroscopy provides unequivocal evidence that substantial populations of reverse turn conformations occur in water solutions of certain of these peptides. In the unfolded state, the peptides adopt predominantly extended chain (beta) conformations in water. It appears probable from the nuclear Overhauser effect connectivities observed that the reverse turns in the trans isomers are predominantly type II. The low temperature coefficient of the amide proton resonance of the residue at position 4 of the turn suggests the presence of an intramolecular hydrogen bond. The presence of the beta-turn conformation has been confirmed for certain peptides by circular dichroism measurements. Substitutions at positions 3 and 4 in the sequence Tyr-Pro-Tyr-Asp-Val can enhance or abolish the beta-turn population in the trans peptide isomers. The residue at position 3 of the turn is the primary determinant of its stability. A small amount of additional stabilization appears to result from an electrostatic interaction between the side-chain of residue 4 and the unblocked amino terminus. For peptides of the series Tyr-Pro-X-Asp-Val, where X represents all L-amino acid except Trp and Pro, the temperature coefficient of the Asp4 amide proton resonance provides a measure of the beta-turn population. The beta-turn populations in water solution measured in this way correlate with the beta-turn probabilities determined from protein crystal structures. This indicates that it is frequently the local amino acid sequence, rather than medium- to long-range interactions in the folded protein, that determines the beta-turn conformation in the folded state. Such sequences are excellent candidates for protein folding initiation sites. A high population of structured forms appears to be present in the cis isomer of certain of the peptides, as shown by a considerable increase in the proportion of the cis isomer and by measurement of nuclear Overhauser effects and 3JN alpha coupling constants.(ABSTRACT TRUNCATED AT 400 WORDS)     

Identification of conserved residue patterns in small beta-barrel proteins

Our abilities to predict three-dimensional conformation of a polypeptide, given its amino acid sequence, remain limited despite advances in structure analysis. Analysis of structures and sequences of protein families with similar secondary structural elements, but varying topologies, might help in addressing this problem. We have studied the small beta-barrel class of proteins characterized by four strands (n = 4) and a shear number of 8 (S = 8) to understand the principles of barrel formation. Multiple alignments of the various protein sequences were generated for the analysis. Positional entropy, as a measure of residue conservation, indicated conservation of non-polar residues at the core positions. The presence of a type II beta-turn among the various barrel proteins considered was another strikingly invariant feature. A conserved glycyl-aspartyl dipeptide at the beta-turn appeared to be important in guiding the protein sequence into the barrel fold. Molecular dynamics simulations of the type II beta-turn peptide suggested that aspartate is a key residue in the folding of the protein sequence into the barrel. Our study suggests that the conserved type II beta-turn and the non-polar residues in the barrel core are crucial for the folding of the protein's primary sequence into the beta-barrel conformation.     

Dramatic stabilization of an SH3 domain by a single substitution: roles of the folded and unfolded states

The N-terminal SH3 domain of the Drosophila drk protein (drkN SH3) exists in equilibrium between folded and unfolded states under non-denaturing buffer conditions. In order to examine the origins of this instability, we have made mutations in the domain and characterized the thermodynamics and kinetics of folding. Results of substitutions of negatively charged residues to neutral amino acid residues suggest that the large electrostatic potential of the domain does not play a dominant role in the instability of the domain. Sequence alignment of a large number of SH3 domains reveals that the drkN SH3 domain has a threonine (T22) at a position corresponding to an otherwise highly conserved glycine residue in the diverging beta-turn connecting the beta3 and beta4 strands. Mutation of T22 to glycine results in significant stabilization of the drkN SH3 domain by 2.5 kcal/mole. To further characterize the basis for the stabilization of the T22 mutant relative to wild-type, we made additional mutant proteins with substitutions of residue T22. A strong correlation is seen between protein stability or folding rate and propensity for native beta-turn structure at this position. Correlation of folding rates with AGADIR predictions of non-native helical structure in the diverging turn region, along with our previous NMR evidence for non-native structure in this region of the unfolded state of the drkN SH3 domain, suggests that the free energy of the unfolded state also plays a role in stability. This result highlights the importance of both folded and unfolded states for understanding protein stability.     

Computer-based redesign of a protein folding pathway.

A fundamental test of our current understanding of protein folding is to rationally redesign protein folding pathways. We use a computer-based design strategy to switch the folding pathway of protein G, which normally involves formation of the second, but not the first, beta-turn at the rate limiting step in folding. Backbone conformations and amino acid sequences that maximize the interaction density in the first beta-hairpin were identified, and two variants containing 11 amino acid replacements were found to be approximately 4 kcal mol-1 more stable than wild type protein G. Kinetic studies show that the redesigned proteins fold approximately 100 x faster than wild type protein and that the first beta-turn is formed and the second disrupted at the rate limiting step in folding.     

Aromatic residues engineered into the beta-turn nucleation site of ubiquitin lead to a complex folding landscape, non-native side-chain interactions, and kinetic traps

The fast folding of small proteins is likely to be the product of evolutionary pressures that balance the search for native-like contacts in the transition state with the minimum number of stable non-native interactions that could lead to partially folded states prone to aggregation and amyloid formation. We have investigated the effects of non-native interactions on the folding landscape of yeast ubiquitin by introducing aromatic substitutions into the beta-turn region of the N-terminal beta-hairpin, using both the native G-bulged type I turn sequence (TXTGK) as well as an engineered 2:2 XNGK type I' turn sequence. The N-terminal beta-hairpin is a recognized folding nucleation site in ubiquitin. The folding kinetics for wt-Ub (TLTGK) and the type I' turn mutant (TNGK) reveal only a weakly populated intermediate, however, substitution with X = Phe or Trp in either context results in a high propensity to form a stable compact intermediate where the initial U-->I collapse is visible as a distinct kinetic phase. The introduction of Trp into either of the two host turn sequences results in either complex multiphase kinetics with the possibility of parallel folding pathways, or formation of a highly compact I-state stabilized by non-native interactions that must unfold before refolding. Sequence substitutions with aromatic residues within a localized beta-turn capable of forming non-native hydrophobic contacts in both the native state and partially folded states has the undesirable consequence that folding is frustrated by the formation of stable compact intermediates that evolutionary pressures at the sequence level may have largely eliminated.     

Model peptide studies of sequence repeats derived from the intracrystalline biomineralization protein, SM50. I. GVGGR and GMGGQ repeats

We report solution-state pulsed field gradient nmr studies of a native sequence-derived 23-residue peptidomimetic, N alpha-acetyl-QPGVGGRQPGMGGQPGVGGRQPG-C alpha-amid, that incorporates the prevalent GVGGR and GMGGQ repeats found in the sea urchin embryo intracrystalline spicule matrix protein, SM50 (Strongylocentrotus purpuratus). These repeats are sequence homologues of elastin protein repeats (VPGVG, VGGVG, and APGVGV) and spider dragline silk protein repeats (GPGG, GQGG, and QPGYG). Using rotating frame nuclear Overhauser effect (ROE) connectivities, CH alpha proton conformational shifts, 3JNH-CH alpha coupling constants, amide temperature shift coefficients, and pulsed field gradient ROE spectroscopy solvent exchange measurements, we find that the 23-mer peptidomimetic possesses a multiple beta-turn structure in aqueous solution, in equilibria with an extended or coil structure (60% beta-turn: 40% random coil). The GVGGR sequence adopts a double beta-turn conformation that is stabilized by two hydrogen bonds (R7-->V4, R20-->V17; G6-->G3, G19-->G16). The GMGGQ region adopts a single beta-turn conformation that is stabilized by a hydrogen bond involving residues Q14 and M11. Repeating beta-turn structures, or beta-spirals, may play an important role with regard to matrix assembly, protein stability, molecular elasticity, and/or protein-crystal recognition within the spicule mineralized matrix.     

Acidic conditions stabilise intermediates populated during the folding of Im7 and Im9

The helical bacterial immunity proteins Im7 and Im9 have been shown to fold via kinetic mechanisms of differing complexity, despite having 60 % sequence identity. At pH 7.0 and 10 degrees C, Im7 folds in a three-state mechanism involving an on-pathway intermediate, while Im9 folds in an apparent two-state transition. In order to examine the folding mechanisms of these proteins in more detail, the folding kinetics of both Im7 and Im9 (at 10 degrees C in 0.4 M sodium sulphate) have been examined as a function of pH. Kinetic modelling of the folding and unfolding data for Im7 between pH 5.0 and 8.0 shows that the on-pathway intermediate is stabilised by more acidic conditions, whilst the native state is destabilised. The opposing effect of pH on the stability of these states results in a significant population of the intermediate at equilibrium at pH 6.0 and below. At pH 7.0, the folding and unfolding kinetics for Im9 can be fitted adequately by a two-state model, in accord with previous results. However, under acidic conditions there is a clear change of slope in the plot of the logarithm of the folding rate constant versus denaturant concentration, consistent with the population of one or more intermediate(s) early during folding. The kinetic data for Im9 at these pH values can be fitted to a three-state model, where the intermediate ensemble is stabilised and the native state destabilised as the pH is reduced, rationalising previous results that showed that an intermediate is not observed experimentally at pH 7.0. The data suggest that intermediate formation is a general step in immunity protein folding and demonstrate that it is necessary to explore a wide range of refolding conditions in order to show that intermediates do not form in the folding of other small, single-domain proteins.     

Single-molecule fluorescence resonance energy transfer assays reveal heterogeneous folding ensembles in a simple RNA stem-loop

We have examined the folding ensembles present in solution for a series of RNA oligonucleotides that encompass the replicase translational operator stem-loop of the RNA bacteriophage MS2. Single-molecule (SM) fluorescence assays suggest that these RNAs exist in solution as ensembles of differentially base-paired/base-stacked states at equilibrium. There are two distinct ensembles for the wild-type sequence, implying the existence of a significant free energy barrier between “folded” and “unfolded” ensembles. Experiments with sequence variants are consistent with an unfolding mechanism in which interruptions to base-paired duplexes, in this example by the single-stranded loop and a single-base bulge in the base-paired stem, as well as the free ends, act as nucleation points for unfolding. The switch between folded and unfolded ensembles is consistent with a transition that occurs when all base-pairing and/or base-stacking interactions that would orientate the legs of the RNA stem are broken. Strikingly, a U-to-C replacement of a residue in the loop, which creates a high-affinity form of the operator for coat protein binding, results in dramatically different (un)folding behaviour, revealing distinct subpopulations that are either stabilised or destabilised with respect to the wild-type sequence. This result suggests additional reasons for selection against the C-variant stem-loop in vivo and provides an explanation for the increased affinity.     

Structure and properties of a dimeric N-terminal fragment of human ubiquitin.

Previous peptide dissection and kinetic experiments have indicated that in vitro folding of ubiquitin may proceed via transient species in which native-like structure has been acquired in the first 45 residues. A peptide fragment, UQ(1-51), encompassing residues 1 to 51 of ubiquitin was produced in order to test whether this portion has propensity for independent self-assembly. Surprisingly, the construct formed a folded symmetrical dimer that was stabilised by 0.8 M sodium sulphate at 298 K (the S state). The solution structure of the UQ(1-51) dimer was determined by multinuclear NMR spectroscopy. Each subunit of UQ(1-51) consists of an N-terminal beta-hairpin followed by an alpha-helix and a final beta-strand, with orientations similar to intact ubiquitin. The dimer is formed by the third beta-strand of one subunit interleaving between the hairpin and third strand of the other to give a six-stranded beta-sheet, with the two alpha-helices sitting on top. The helix-helix and strand portions of the dimer interface also mimic related features in the structure of ubiquitin. The structural specificity of the UQ(1-51) peptide is tuneable: as the concentration of sodium sulphate is decreased, near-native alternative conformations are populated in slow chemical exchange. Magnetization transfer experiments were performed to characterize the various species present in 0.35 M sodium sulphate, namely the S state and two minor forms. Chemical shift differences suggest that one minor form is very similar to the S state, while the other experiences a significant conformational change in the third strand. A segmental rearrangement of the third strand in one subunit of the S state would render the dimer asymmetric, accounting for most of our results. Similar small-scale transitions in proteins are often invoked to explain solvent exchange at backbone amide proton sites that have an intermediate level of protection.     

Isolation and characterization of a somatomedin-binding protein from mid-term human amniotic fluid

Human amniotic fluid is rich in a binding protein for somatomedins. This binding protein competes with human placenta membranes for labelled somatomedin A. Consequently, the placenta radioreceptorassay for somatomedin can be used for detection of the binding protein. The protein was isolated from human amniotic fluid by a three-step procedure: First, stepwise ammonium sulphate precipitation; second, hydrophobic chromatography (phenyl-Sepharose); and third, anion-exchange chromatography (fast protein liquid chromatography). The total recovery of binding protein calculated with the placenta radioreceptorassay was 50%. Polyacrylamide gel electrophoresis under native and denaturating conditions of the isolated protein disclosed a single band. The relative molecular mass was 35000, determined by exclusion chromatography, and 32000 under denaturating conditions in sodium dodecyl sulphate/polyacrylamide gel electrophoresis. The isoelectric point was 4.3 according to chromatofocusing and the amino acid composition also disclosed a high content of acidic/amidated residues. The N-terminal amino acid sequence was Ala-Pro-Trp-Gln-Cys-Ala-Pro-Cys-Ser-Ala.