Low-density lipoprotein aggregation is inhibited by apolipoprotein J-derived mimetic peptide D-[113–122]apoJ

Mimetic peptides are promising therapeutic agents for atherosclerosis prevention. A 10-residue class G* peptide from apolipoprotein J (apoJ), namely, D-[113–122]apoJ, possesses anti-inflammatory and anti-atherogenic properties. This prompted us to determine its effect on the aggregation process of low-density lipoprotein (LDL) particles, an early event in the development of atherosclerosis. LDL particles with and without [113–122]apoJ peptide were incubated at 37 °C with sphingomyelinase (SMase) or were left to aggregate spontaneously at room temperature. The aggregation process was analyzed by size-exclusion chromatography (SEC), native gradient gel electrophoresis (GGE), absorbance at 405 nm, dynamic light scattering (DLS), and transmission electronic microscopy (TEM). In addition, circular dichroism was used to determine changes in the secondary structure of apoB, and SDS-PAGE was performed to assess apoB degradation. At an equimolar ratio of [113–122]apoJ peptide to apoB-100, [113–122]apoJ inhibited both SMase-induced or spontaneous LDL aggregation. All methods showed that [113–122]apoJ retarded the progression of SMase-induced LDL aggregation at long incubation times. No effect of [113–122]apoJ on apoB secondary structure was observed. Binding experiments showed that [113–122]apoJ presents low affinity for native LDL but binds readily to LDL during the first stages of aggregation. Laurdan fluorescence experiments showed that mild aggregation of LDL resulted in looser lipid packaging, which was partially prevented by D-[113–122]apoJ. These results demonstrate that [113–122]apoJ peptide prevents SMase-induced LDL aggregation at an equimolar ratio and opens the possibility for the use of this peptide as a therapeutic tool.     

Anti-inflammatory peptides grab on to the whiskers of atherogenic oxidized lipids

The peptide 4F is known to have potent anti-atherogenic activity. 4F is an 18 residue peptide that has a sequence capable of forming a class A amphipathic helix. Several other class A amphipathic helical, 18 residue peptides with the same polar face but with increasing Phe residues on the nonpolar face have been synthesized with varying degrees of biological activity. In this work we compared the properties of the original 2F peptide, modeled on the consensus sequence of the amphipathic helical segments of the apolipoprotein A-I with the peptide 4F that has two Leu residues replaced with Phe. We demonstrate that the more biologically active 4F peptide has the greatest affinity for binding to several molecular species of oxidized lipids. Lipoprotein particles can be formed by solubilizing 1-palmitoyl-2-oleoyl phosphatidylcholine (POPC) with peptides. These solubilized lipoprotein particles extract oxidized lipid from liposomes of POPC containing 5 mol% of oxidized lipid. The peptides with the strongest anti-atherogenic activity interact most strongly with the oxidized lipid. The results show that there is a correlation between the biological potency of these peptides and their ability to interact with certain specific cytotoxic lipids, suggesting that this interaction may contribute favourably to their biological properties.     

Lipid-bound structure of an apolipoprotein E-derived peptide

Apolipoprotein (apo) E regulates plasma lipid homeostasis through its ability to interact with the low density lipoprotein (LDL) receptor family. Whereas apoE is not a ligand for receptor binding in buffer alone, interaction with lipid confers receptor recognition properties. To investigate the nature of proposed lipid binding-induced conformational changes in apoE, we employed multidimensional heteronuclear NMR spectroscopy to determine the structure of an LDL receptor-active, 58-residue peptide comprising residues 126-183 of apoE in association with the micelle-forming lipid dodecylphosphocholine (DPC). In the presence of 34 mm DPC the peptide forms a continuous amphipathic helix from Glu131 to Arg178. NMR relaxation studies of DPC-bound apoE-(126-183), in contrast to apoE-(126-183) in the presence of TFE, are consistent with an isotropically tumbling peptide in solution giving a global correlation time of approximately 12.5 ns. These data indicate that the helical peptide is curved and constrained by a lipid micelle consisting of approximately 48 DPC molecules. Although the peptide behaves as if it were tumbling isotropically, spectral density analysis reveals that residues 150-183 have more motional freedom than residues 134-149. These molecular and dynamic features are discussed further to provide insight into the structural basis for the interaction between apoE and the ligand binding repeats of the LDL receptor.     

Antimicrobial peptide RP-1 structure and interactions with anionic versus zwitterionic micelles

Topologically, platelet factor-4 kinocidins consist of distinct N-terminal extended, C-terminal helical, and interposing gamma-core structural domains. The C-terminal alpha-helices autonomously confer direct microbicidal activity, and the synthetic antimicrobial peptide RP-1 is modeled upon these domains. In this study, the structure of RP-1 was assessed using several complementary techniques. The high-resolution structure of RP-1 was determined by NMR in anionic sodium dodecyl sulfate (SDS) and zwitterionic dodecylphosphocholine (DPC) micelles, which approximate prokaryotic and eukaryotic membranes, respectively. NMR data indicate the peptide assumes an amphipathic alpha-helical backbone conformation in both micelle environments. However, small differences were observed in the side-chain orientations of lysine, tyrosine, and phenylalanine residues in SDS versus DPC environments. NMR experiments with a paramagnetic probe indicated differences in positioning of the peptide within the two micelle types. Molecular dynamics (MD) simulations of the peptide in both micelle types were also performed to add insight into the peptide/micelle interactions and to assess the validity of this technique to predict the structure of peptides in complex with micelles. MD independently predicted RP-1 to interact only peripherally with the DPC micelle, leaving its spherical shape intact. In contrast, RP-1 entered deeply into and significantly distorted the SDS micelle. Overall, the experimental and MD results support a preferential specificity of RP-1 for anionic membranes over zwitterionic membranes. This specificity likely derives from differences in RP-1 interaction with distinct lipid systems, including subtle differences in side chain orientations, rather than gross changes in RP-1 structure in the two lipid environments.     

Model membrane interaction and DNA-binding of antimicrobial peptide Lasioglossin II derived from bee venom

Lasioglossins, a new family of antimicrobial peptide, have been shown to have strong antimicrobial activity with low haemo-lytic and mast cell degranulation activity, and exhibit cytotoxic activity against various cancer cells in vitro. In order to understand the active conformation of these pentadecapeptides in membranes, we have studied the interaction of Lasioglossin II (LL-II), one of the members of Lasioglossins family with membrane mimetic micelle Dodecylphosphocholine (DPC) by fluorescence, Circular Dichroism (CD) and two dimensional (2D) ¹H NMR spectroscopy. Fluorescence experiments provide evidence of interaction of the N-terminal tryptophan residue of LL-II with the hydrophobic core of DPC micelle. CD results show an extended chain conformation of LL-II in water which is converted to a partial helical conformation in the presence of DPC micelle. Moreover we have determined the first three-dimensional NMR structure of LL-II bound to DPC micelle with rmsd of 0.36 Å. The solution structure of LL-II shows hydrophobic and hydrophilic core formation in peptide pointing towards different direction in the presence of DPC. This amphipathic structure may allow this peptide to penetrate deeply into the interfacial region of negatively charged membranes and leading to local membrane destabilization. Further we have elucidated the DNA binding ability of LL-II by agarose gel retardation and fluorescence quenching experiments.     

pH-Dependent conformational changes and topology of a herpesvirus translocating peptide in a membrane-mimetic environment

Pol peptide, an oligopeptide corresponding to the 27 C-terminal amino acids of DNA polymerase from herpes simplex virus type 1, has recently been suggested to translocate from endosomal compartments into the cytosol after being intracellularly delivered via a protein carrier. While an acidic environment was thought to be important for Pol peptide membrane translocation, the mechanism of translocation remains unclear. To investigate the influence of an acidic environment on the conformational properties of the peptide and on its propensity to interact with lipid bilayers, we characterized the structure of Pol peptide at different pH values by both circular dichroism (CD) and nuclear magnetic resonance (NMR) spectroscopy. The influence of detergent micelles, which mimic biological lipid membranes, on the peptide secondary structure was also studied. Our CD results indicate that the peptide is in a random conformation in aqueous solution at both acidic and basic pH, whereas in the presence of dodecylphosphocholine (DPC) micelles, it assumes a partial alpha-helical structure which is significantly pH-dependent. An NMR study confirmed that, in the presence of DPC micelles, a short C-terminal alpha-helix is present at pH 6.5, whereas almost two-thirds of the peptide (residues 10-26) fold into an extended amphipathic alpha-helix at pH 4.0. The orientation of Pol peptide relative to the DPC micelle was investigated using paramagnetic probes at both pH 4.0 and 6.5. These studies show that the peptide inserts deeply into the micelle at pH 4.0, whereas it is more exposed to the aqueous environment at pH 6.5. On the basis of these results, a model which might explain the mechanism of translocation of Pol peptide from acidic endosomes to the cytosol is discussed.     

Solution structure of a designed amphipathic antimicrobial synthetic peptide, PGAa

A designed peptide, PGAa showed an excellent antifungal activity as well as an efficient bactericidal activity toward gram-positive, especially in the pathogenic yeast Candida albicans 28838. The solution structures of PGAa have been determined both in 40% TFE/water solution and DPC micelle by CD and NMR spectroscopy. Based on NOEs, vicinal coupling constants, backbone amide exchange rates, and chemical shift indices, PGAa formed a long amphipathic alpha-helical conformation in both TFE and DPC micelle environments, spanning the residues Ile(2)-Ala(19) in TFE and Lys(5)-Ala(19) in DPC micelle, respectively. Solution structures suggested that the hydrophobic residues would interact with the fatty acyl chains of the lipid bilayer, while the positively charged side-chains exposed to aqueous environments. Therefore, we conclude that the alpha-helical structure as well as the highly amphiphatic nature of PGAa peptide may play a critical role in its antimicrobial activity as well as selectivities in different species.     

Molecular dynamics simulations of adrenocorticotropin (1-24) peptide in a solvated dodecylphosphocholine (DPC) micelle and in a dimyistoylphosphatidylcholine (DMPC) bilayer

The structure and interactions of the 1-24 fragment of the adrenocorticotropin hormone, ACTH (1-24), with membrane have been studied by molecular dynamics (MD) simulation in an NPT ensembles in two explicit membrane mimics, a dodecylphosphocholine (DPC) micelle and a dimyristoylphosphatidylcholine (DMPC) bilayer. The starting configuration of the peptide/lipid systems had the 1-10 segment of the peptide lying on the surface of the model membrane, the same as the equilibrated structure (by MD) of ACTH (1-10) in a DPC micelle. The simulations showed that the peptide adopts the surface-binding mode and essentially the same structure in both systems. Thus the results of this work lend support to the assumption that micelles are reasonable mimics for biological membranes for the study of peptide binding. The 1-10 segment is slightly tilted from the parallel orientation to the interface and interacts strongly with the membrane surface while the more polar 11-24 segment shows little tendency to interact with the membrane surface, preferring to reside primarily in the aqueous phase. Furthermore, the 1-10 segment of the peptide binds to the DPC micelle in essentially the same way as ACTH (1-10). Thus the MD results are in excellent agreement with the model of interaction of ACTH (1-24) with membrane derived from NMR experiments. The secondary structure and the hydration of the peptide and the interactions of specific residues with the lipid head groups have also been analyzed.     

Structural features of peptoid–peptide hybrids in lipid–water interfaces

The inclusion of peptoid monomers into antimicrobial peptides (AMPs) increases their proteolytic resistance, but introduces conformational flexibility (reduced hydrogen bonding ability and cis/trans isomerism). We here use NMR spectroscopy to answer how the insertion of a peptoid monomer influences the structure of a regular α-helical AMP upon interaction with a dodecyl phosphocholine (DPC) micelle. Insertion of [(2-methylpropyl)amino]acetic acid in maculatin-G15 shows that the structural change and conformational flexibility depends on the site of insertion. This is governed by the micelle interaction of the amphipathic helices flanking the peptoid monomer and the side chain properties of the peptoid and its preceding residue.     

Molecular dynamics investigation of the influence of anionic and zwitterionic interfaces on antimicrobial peptides' structure: implications for peptide toxicity and activity

Molecular dynamics simulations of three related helical antimicrobial peptides have been carried out in zwitterionic diphosphocholine (DPC) micelles and anionic sodiumdodecylsulfate (SDS) micelles. These systems can be considered as model mammalian and bacterial membrane interfaces, respectively. The goal of this study is to dissect the differences in peptide composition which make the mutant peptides (novispirin-G10 and novispirin-T7) less toxic than the parent peptide ovispirin (OVIS), although all three peptides have highly antibacterial properties. Compared to G10 and T7, OVIS inserts deepest into the DPC micelle. This correlates well with the lesser toxicity of G10 and T7. There is strong evidence which suggests that synergistic binding of hydrophobic residues drives binding of OVIS to the micelle. The helical content of G10 and T7 is reduced in the presence of DPC, and this leads to less amphipathic peptide structures, which bind weakly to the micelle. Simulations in SDS were carried out to compare the influence of membrane electrostatics on peptide structure. All three peptides bound strongly to SDS, and retained helical form. This corresponds well with their equally potent antibacterial properties. Based on the simulations, we argue that secondary structure stability often leads to toxic properties. We also propose that G10 and T7 operate by the carpet mechanism of cell lysis. Toxicity of peptides operating by the carpet mechanism can be attenuated by reducing the peptide helical content. The simulations successfully capture experimental binding states, and the different depths of binding of the three peptides to the two micelles correlate with their antibacterial and toxic properties.     

Micelle-bound conformation of a hairpin-forming peptide: combined NMR and molecular dynamics study

A peptide fragment from a protein hairpin turn region was modified by addition of isoleucine residues to both ends to enhance binding to lipid micelles; the resulting peptide (I(1)-I(2)-C(3)-N(4)-N(5)-P(6)-H(7)-I(8)-I(9)) contains the core sequence I-C-N-N-P-H from an antibody-binding region of hemagglutinin A. Nuclear magnetic resonance (NMR) diffusion measurements indicated partial binding (43-65%) of the peptide to micelles of n-octylglucoside and significantly stronger binding (85%) to dodecylphosphocholine (DPC) micelles. Simulated annealing and conformational analysis using nuclear Overhauser enhancement restraints revealed a type I or III hairpin turn between residues N(5) and I(8) of the DPC-bound peptide. Amide exchange experiments support the possibility that a hydrogen bond forms between N(5) and I(8), stabilizing the turn. In contrast, no discernable structure was observed for the peptide in aqueous solution by either NMR or circular dichroism. Molecular dynamics simulations of DPC micelles and peptide-micelle complexes suggested that the peptide lies flat on the micelle surface and showed rapid rearrangement of the lipids to accommodate the bound peptide. According to a search performed using the basic local alignment search tool (BLAST), the sequences N-P-H-I and N-P-H-V are present as hairpin turns in eight of the nine proteins whose crystal structures were available. The addition of isoleucine residues and the use of lipid micelles to stabilize hairpin conformations equivalent to those found in proteins generates new possibilities for reproducing biologically important hairpin turns from short, linear peptides.     

Solution structure and interaction of the antimicrobial polyphemusins with lipid membranes

The horseshoe crab cationic antimicrobial peptide polyphemusin I is highly active in vitro but not protective in mouse models of bacterial and LPS challenge, while a synthetic polyphemusin variant, PV5, was previously shown to be protective in vivo. In this study, we investigated the interaction of these peptides with lipid membranes in an effort to propose a mechanism of interaction. The solution structure of PV5 was determined by proton NMR in the absence and presence of dodecylphosphocholine (DPC) micelles. Like polyphemusin I, PV5 is a beta-hairpin but appeared less amphipathic in solution. Upon association with DPC micelles, PV5 underwent side chain rearrangements which resulted in an increased amphipathic conformation. Using fluorescence spectroscopy, both peptides were found to have limited affinity for neutral vesicles composed of phosphatidylcholine (PC). Incorporation of 25 mol % cholesterol or phosphatidylethanolamine into PC vesicles produced little change in the partitioning of either peptide. Incorporation of 25 mol % phosphatidylglycerol (PG) into PC vesicles, a simple prokaryotic model, resulted in a large increase in the affinity for both peptides, but the partition coefficient for PV5 was almost twice that of polyphemusin I. Differential scanning calorimetry studies supported the partitioning data and demonstrated that neither peptide interacted readily with neutral PC vesicles. Both peptides showed affinity for negatively charged membranes incorporating PG. The affinity of PV5 was much greater as the pretransition peak was absent at low peptide to lipid ratios (1:400) and the reduction in enthalpy of the main transition was greater than that produced by polyphemusin I. Both peptides decreased the lamellar to inverted hexagonal phase transition temperature of PE indicating the induction of negative curvature strain. These results, combined with previous findings that polyphemusin I promotes lipid flip-flop but does not induce significant vesicle leakage, ruled out the torroidal pore and carpet mechanisms of antimicrobial action for these polyphemusins.     

Molecular dynamics simulation of adrenocorticotropin (1-10) peptide in a solvated dodecylphosphocholine micelle

Adrenocorticotropin (ACTH) (1-10), an adrenocorticotropin hormone fragment, has been studied by molecular dynamics (MD) simulation in an NPT ensemble in an explicit dodecylphosphocholine (DPC) micelle. Two starting configurations of the peptide/micelle system, corresponding to the insertion and surface-binding modes, were used. A common equilibrated configuration, in which the peptide lies parallel to the micellar surface, was reached from both simulations. In the initial part of the simulations, distance restraints derived from NMR nuclear Overhauser enhancements were incorporated before the peptide reached an equilibrium configuration with respect to the micelle. Analyses of the trajectories from the subsequent free (unrestrained) MD simulation showed that ACTH (1-10) does not conform strictly to a helical structure. The loss of the helical structure is due to decreased intramolecular hydrogen bonding accompanied by an increase of hydrogen bonding between the amide protons of the peptide and the micellar head groups. However, the extent of the latter interaction is less pronounced than in the negatively charged SDS micelle. The final structure enhances the amphipathic nature of the peptide, facilitating better interactions at the water-hydrophobic interface. The primary hydrophobic interactions with the micelle came from the side chains of Met4, Phe7, and Trp9. All peptide bonds were either hydrated or were involved in intramolecular hydrogen bonding. The interactions with the DPC micelle, the conformation of the bound peptide, and the dynamics of the peptide, as revealed by the time correlation functions of the N-H bonds, were compared with those of the ACTH (1-10)/SDS system studied previously by MD simulations.     

Structure of the antimicrobial peptide tritrpticin bound to micelles: a distinct membrane-bound peptide fold

Tritrpticin is a member of the cathelicidin family, a group of diverse antimicrobial peptides found in neutrophil granules. The three Trp and four Arg residues in the sequence VRRFPWWWPFLRR make this a Trp-rich cationic peptide. The structure of tritrpticin bound to membrane-mimetic sodium dodecyl sulfate micelles has been determined using conventional two-dimensional NMR methods. It forms two adjacent turns around the two Pro residues, a distinct fold for peptide-membrane interaction. The first turn involves residues 4-7, followed immediately by a second well-defined 3(10)-helical turn involving residues 8-11. The hydrophobic residues are clustered together and are clearly separated from the basic Arg residues, resulting in an amphipathic structure. Favorable interactions between the unusual amphipathic fold and the micelle surface are probably key to determining the peptide structure. NMR studies of the peptide in the micelle in the presence of the spin-label 5-doxylstearic acid determined that tritrpticin lies near the surface of the micelle, where its many aromatic side chains appear to be equally partitioned into the hydrophilic-hydrophobic interface. Additional fluorescence studies confirmed that the tryptophan residues are inserted into the micelle and are partially protected from the effects of the soluble fluorescence quencher acrylamide.     

Membrane binding and pore formation of the antibacterial peptide PGLa: thermodynamic and mechanistic aspects

The antibacterial peptide PGLa exerts its activity by permeabilizing bacterial membranes whereas eukaryotic membranes are not affected. To provide insight into the selectivity and the permeabilization mechanism, the binding of PGLa to neutral and negatively charged model membranes was studied with high-sensitivity isothermal titration calorimetry (ITC), circular dichroism (CD), and solid-state deuterium nuclear magnetic resonance ((2)H NMR). The binding of PGLa to negatively charged phosphatidylcholine (PC)/phosphatidylglycerol (PG) (3:1) vesicles was by a factor of approximately 50 larger than that to neutral PC vesicles. The negatively charged membrane accumulates the cationic peptide at the lipid-water interface, thus facilitating the binding to the membrane. However, if bulk concentrations are replaced by surface concentrations, very similar binding constants are obtained for neutral and charged membranes (K approximately 800-1500 M(-)(1)). Membrane selectivity is thus caused almost exclusively by electrostatic attraction to the membrane surface and not by hydrophobic insertion. Membrane insertion is driven by an exothermic enthalpy (DeltaH approximately -11 to -15 kcal/mol) but opposed by entropy. An important contribution to the binding process is the membrane-induced random coil --> alpha-helix transition of PGLa. The peptide is random coil in solution but adopts an approximately 80% alpha-helical conformation when bound to the membrane. Helix formation is an exothermic process, contributing approximately 70% to the binding enthalpy and approximately 30% to the free energy of binding. The (2)H NMR measurements with selectively deuterated lipids revealed small structural changes in the lipid headgroups and in the hydrocarbon interior upon peptide binding which were continuous over the whole concentration range. In contrast, isothermal titration calorimetry of PGLa solutions with PC/PG(3:1) vesicles gave rise to two processes: (i) an exothermic binding of PGLa to the membrane followed by (ii) a slower endothermic process. The latter is only detected at peptide-to-lipid ratios >17 mmol/mol and is paralleled by the induction of membrane leakiness. Dye efflux measurements are consistent with the critical limit derived from ITC measurements. The endothermic process is assigned to peptide pore formation and/or lipid perturbation. The enthalpy of pore formation is 9.7 kcal/mol of peptide. If the same excess enthalpy is assigned to the lipid phase, the lipid perturbation enthalpy is 180 cal/mol of lipid. The functional synergism between PGLa and magainin 2 amide could also be followed by ITC and dye release experiments and is traced back to an enhanced pore formation activity of a peptide mixture.     

Molecular Dynamics Simulations of Adrenocorticotropin (1–24) Peptide in a Solvated Dodecylphosphocholine (DPC) Micelle and in a Dimyistoylphosphatidylcholine (DMPC) Bilayer

Abstract

The structure and interactions of the 1–24 fragment of the adrenocorticotropin hormone, ACTH (1–24), with membrane have been studied by molecular dynamics (MD) simulation in an NPT ensembles in two explicit membrane mimics, a dodecylphosphocholine (DPC) micelle and a dimyristoylphosphatidylcholine (DMPC) bilayer. The starting configuration of the peptide/lipid systems had the 1–10 segment of the peptide lying on the surface of the model membrane, the same as the equilibrated structure (by MD) of ACTH (1–10) in a DPC micelle. The simulations showed that the peptide adopts the surface-binding mode and essentially the same structure in both systems. Thus the results of this work lend support to the assumption that micelles are reasonable mimics for biological membranes for the study of peptide binding. The 1–10 segment is slightly tilted from the parallel orientation to the interface and interacts strongly with the membrane surface while the more polar 11–24 segment shows little tendency to interact with the membrane surface, preferring to reside primarily in the aqueous phase. Furthermore, the 1–10 segment of the peptide binds to the DPC micelle in essentially the same way as ACTH (1–10). Thus the MD results are in excellent agreement with the model of interaction of ACTH (1–24) with membrane derived from NMR experiments. The secondary structure and the hydration of the peptide and the interactions of specific residues with the lipid head groups have also been analyzed.     

Interactions of the antimicrobial peptide Ac-FRWWHR-NH(2) with model membrane systems and bacterial cells.

The acetylated and amidated hexapeptide FRWWHR (combi-2), previously identified by combinatorial chemistry methods, shows strong antimicrobial activity. The binding of the peptide to 1-palmitoyl-2-oleoyl-sn-glycero-3-[(phospho-rac-(1-glycerol)] (POPG) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) vesicles was studied using fluorescence spectroscopy and isothermal titration calorimetry (ITC). Differential scanning calorimetry (DSC) with dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidylglycerol (DPPG) multilamellar vesicles was performed to determine changes in the lipid phase behaviour upon binding the peptide. Two-dimensional proton nuclear magnetic resonance (NMR) spectroscopy, to solve the bound peptide structure, was performed in the presence of dodecylphosphatidylcholine (DPC) and sodium dodecyl sulphate (SDS) micelles. The fluorescence, ITC and DSC studies indicate that the peptide interacts preferentially with lipid vesicles containing negatively charged head groups. Conformational information determined using NMR indicate that the combi-2 peptide adopts a coiled amphipathic conformation when bound to SDS and DPC micelles. Leakage assays indicate that the peptide is not very efficient at causing leakage from calcein-filled large unilamellar vesicles comprised of POPG/POPC (1 : 1). The rapid passage of either the fluorescent-tagged peptides combi-2 or the previously studied peptide Ac-RRWWRF-NH(2) (combi-1) into Escherichia coli and Staphylococcus aureus suggests that instead of membrane disruption, the main bactericidal site of action of these peptides might be located inside bacteria.     

Relative free energy of binding between antimicrobial peptides and SDS or DPC micelles

We present relative binding free energy calculations for six antimicrobial peptide-micelle systems, three peptides interacting with two types of micelles. The peptides are the scorpion derived antimicrobial peptide (AMP), IsCT and two of its analogues. The micelles are dodecylphosphatidylcholine (DPC) and sodium dodecylsulphate (SDS) micelles. The interfacial electrostatic properties of DPC and SDS micelles are assumed to be similar to those of zwitterionic mammalian and anionic bacterial membrane interfaces, respectively. We test the hypothesis that the binding strength between peptides and the anionic micelle SDS can provide information on peptide antimicrobial activity, since it is widely accepted that AMPs function by binding to and disrupting the predominantly anionic lipid bilayer of the bacterial cytoplasmic membrane. We also test the hypothesis that the binding strength between peptides and the zwitterionic micelle DPC can provide information on peptide haemolytic activities, since it is accepted that they also bind to and disrupt the zwitterionic membrane of mammalian cells. Equilibrium structures of the peptides, micelles and peptide-micelle complexes are obtained from more than 300 ns of molecular dynamics simulations. A thermodynamic cycle is introduced to compute the binding free energy from electrostatic, non-electrostatic and entropic contributions. We find relative binding free energy strengths between peptides and SDS to correlate with the experimentally measured rankings for peptide antimicrobial activities, and relative free energy binding strengths between peptides and DPC to correlate with the observed rankings for peptide haemolytic toxicities. These findings point to the importance of peptide-membrane binding strength for antimicrobial activity and haemolytic activity.     

Peptide binding to lipid bilayers. Nonclassical hydrophobic effect and membrane-induced pK shifts.

The binding of the cyclic peptide (+)-D-Phe1-Cys2-Phe3-D-Trp4-(+)-Lys5-Thr6- Cys7-Thr(ol)8, a somatostatin analogue (SMS 201-995), and the potential-sensitive dye 2-(p-toluidinyl)naphthalene-6-sulfonate (TNS) to lipid membranes was investigated with high-sensitivity titration calorimetry. The binding enthalpy of the peptide was found to vary dramatically with the vesicle size. For highly curved vesicles with a diameter of d congruent to 30 nm, the binding reaction was enthalpy-driven with delta H congruent to -7.0 +/- 0.3 kcal/mol; for large vesicles with more tightly packed lipids, the binding reaction became endothermic with delta H congruent to +1.0 +/- 0.3 kcal/mol and was entropy-driven. In contrast, the free energy of binding was almost independent of the vesicle size. The thermodynamic analysis suggests that the observed enthalpy-entropy compensation of about 8 kcal/mol can be related to a change in the internal tension of the bilayer and is brought about by an entropy increase of the lipid matrix. The "entropy potential" of the membrane may have its molecular origin in the excitation of the hydrocarbon chains to a more disordered configuration and may play a more important role in membrane partition equilibria than the classical hydrophobic effect. The binding of the peptide to the membrane surface induced a pK shift of the peptide terminal amino group. Neutral membranes were found to destabilize the NH3+ group, leading to a decrease in pK; negatively charged membranes, generated an apparent increase in pK due to the increase in proton concentration near the membrane surface. No pK shifts were seen for TNS. Titration calorimetry combined with the Gouy-Chapman theory can be used to determine both the reaction enthalpy and the binding constant of the membrane-binding equilibrium.     

Solution NMR studies of amphibian antimicrobial peptides: Linking structure to function?

The high-resolution three-dimensional structure of an antimicrobial peptide has implications for the mechanism of its antimicrobial activity, as the conformation of the peptide provides insights into the intermolecular interactions that govern the binding to its biological target. For many cationic antimicrobial peptides the negatively charged membranes surrounding the bacterial cell appear to be a main target. In contrast to what has been found for other classes of antimicrobial peptides, solution NMR studies have revealed that in spite of the wide diversity in the amino acid sequences of amphibian antimicrobial peptides (AAMPs), they all adopt amphipathic α-helical structures in the presence of membrane-mimetic micelles, bicelles or organic solvent mixtures. In some cases the amphipathic AAMP structures are directly membrane-perturbing (e.g. magainin, aurein and the rana-box peptides), in other instances the peptide spontaneously passes through the membrane and acts on intracellular targets (e.g. buforin). Armed with a high-resolution structure, it is possible to relate the peptide structure to other relevant biophysical and biological data to elucidate a mechanism of action. While many linear AAMPs have significant antimicrobial activity of their own, mixtures of peptides sometimes have vastly improved antibiotic effects. Thus, synergy among antimicrobial peptides is an avenue of research that has recently attracted considerable attention. While synergistic relationships between AAMPs are well described, it is becoming increasingly evident that analyzing the intermolecular interactions between these peptides will be essential for understanding the increased antimicrobial effect. NMR structure determination of hybrid peptides composed of known antimicrobial peptides can shed light on these intricate synergistic relationships. In this work, we present the first NMR solution structure of a hybrid peptide composed of magainin 2 and PGLa bound to SDS and DPC micelles. The hybrid peptide adopts a largely helical conformation and some information regarding the inter-helix organization of this molecule is reported. The solution structure of the micelle associated MG2-PGLa hybrid peptide highlights the importance of examining structural contributions to the synergistic relationships but it also demonstrates the limitations in the resolution of the currently used solution NMR techniques for probing such interactions. Future studies of antimicrobial peptide synergy will likely require stable isotope-labeling strategies, similar to those used in NMR studies of proteins.