The catalytic domain of endoglucanase A from Clostridium cellulolyticum: effects of arginine 79 and histidine 122 mutations on catalysis.

Sequence analysis of the endoglucanase EGCCA of Clostridium cellulolyticum indicates the existence of two domains: a catalytic domain extending from residue 1 to residue 376 and a reiterated domain running from residue 390 to 450. A small deletion in the C terminal end of the catalytic domain inactivated the protein. From the analysis of the sequences of 26 endoglucanases belonging to family A, we focused on seven amino acids which were totally conserved in all the catalytic domains compared. The roles of two of these, Arg-79 and His-122, were studied and defined on the basis of the mutants obtained by introducing various substitutions. Our findings suggest that Arg-79 is involved in the structural organization of the protein; the His-122 residue seems to be more essential for catalysis. The role of His-123, which is conserved only in subfamily A4, was also investigated.     

Nucleotide sequence analysis of the endoglucanase-encoding gene, celCCD, of Clostridium cellulolyticum

The nucleotide sequence of the Clostridium cellulolyticum endo-beta-1,4- glucanase (EGCCD)-encoding gene, celCCD, and its flanking regions, was determined. The open reading frame encodes a protein (Mr 66,061) which consists of 584 amino acids (aa). The N terminus shows the features of the typical signal peptide, with a cleavage site after Gly24. The protein could be divided into N-terminal and C-terminal regions by an intermediate Pro + Thr-rich sequence. Deletion analysis suggests the C-terminal region is not necessary for EG activity. The predicted aa sequence of the mature protein was similar to those of the central catalytic and the following C-terminal regions of the C. thermocellum endoglucanase H (EGH; identity, 58.8%). The N-terminal region resembled that of the endoglucanase, EGCCA, from C. cellulolyticum (identity, 24.7%; 336 aa) and the endoglucanase, EGE, from C. thermocellum (identity, 31.4%; 373 aa). The C-terminal regions ended with two conserved 21-aa stretches which had close similarity to each other. The C-terminal sequence was also highly similar to the reiterated domain of several EG and a xylanase from C. thermocellum, and of an EG from C. cellulolyticum.     

Nucleotide sequence and characteristics of endoglucanase gene engB from Clostridium cellulovorans

An endoglucanase gene, engB, from Clostridium cellulovorans, previously cloned into pUC19, has been further characterized and its product investigated. The enzyme, EngB, encoded by the gene was secreted into the periplasmic space of Escherichia coli. The enzyme was active against carboxymethylcellulose, xylan and lichenan but not Avicel (crystalline cellulose). The sequenced gene showed an open reading frame of 1323 base pairs and coded for a protein with a molecular mass of 48.6 kDa. The mRNA contained a typical Gram-positive ribosome-binding site sequence GGAGG and a sequence coding for a putative signal peptide. There is high amino acid and base sequence homology between the N-terminal regions of EngB and another C. cellulovorans endoglucanase, EngD, but they differ significantly in their C-termini. Deletion analyses revealed that up to 32 amino acids of the N-terminus and 52 amino acids of the C-terminus were not required for catalytic activity. The conserved reiterated domains at the C-terminus of EngB were similar to those from endoglucanases from other cellulytic bacteria. According to our deletion analyses, this region is not needed for catalytic activity.     

CelG from Clostridium cellulolyticum: a multidomain endoglucanase acting efficiently on crystalline cellulose.

The gene coding for CelG, a family 9 cellulase from Clostridium cellulolyticum, was cloned and overexpressed in Escherichia coli. Four different forms of the protein were genetically engineered, purified, and studied: CelGL (the entire form of CelG), CelGcat1 (the catalytic domain of CelG alone), CelGcat2 (CelGcat1 plus 91 amino acids at the beginning of the cellulose binding domain [CBD]), and GST-CBD(CelG) (the CBD of CelG fused to glutathione S-transferase). The biochemical properties of CelG were compared with those of CelA, an endoglucanase from C. cellulolyticum which was previously studied. CelG, like CelA, was found to have an endo cutting mode of activity on carboxymethyl cellulose (CMC) but exhibited greater activity on crystalline substrates (bacterial microcrystalline cellulose and Avicel) than CelA. As observed with CelA, the presence of the nonhydrolytic miniscaffolding protein (miniCipC1) enhanced the activity of CelG on phosphoric acid swollen cellulose (PASC), but to a lesser extent. The absence of the CBD led to the complete inactivation of the enzyme. The abilities of CelG and GST-CBD(CelG) to bind various substrates were also studied. Although the entire enzyme is able to bind to crystalline cellulose at a limited number of sites, the chimeric protein GST-CBD(CelG) does not bind to either of the tested substrates (Avicel and PASC). The lack of independence between the two domains and the weak binding to cellulose suggest that this CBD-like domain may play a special role and be either directly or indirectly involved in the catalytic reaction.     

Cloning, nucleotide sequence and expression of the gene encoding the cellulose-binding protein 1 (CBP1) of Fibrobacter succinogenes S85

Abstract The nucleotide sequence of the gene encoding the Fibrobacter succinogenes S85 cellulose-binding protein 1 (CBP1) has been determined. The gene encodes a protein of 1054 amino acids with a molecular mass of 118614. The deduced amino acid sequence of CBPl showed an extensive similarity to the cellulose-binding domain of an endoglucanase (EGCCD) from Clostridium cellulolyticum and contained the reiterated regions. The cloned gene was inserted into an expression vector, pRSETA, and was expressed in E. coli as a fused protein with the peptide consisting of six consecutive histidine residues. The fused protein was detected by immunoblotting using antiserum against CBP1, and exhibited the cellulose-binding activities.     

Cloning of an Azorhizobium caulinodans endoglucanase gene and analysis of its role in symbiosis.

Azorhizobium caulinodans ORS571, a symbiont of the tropical leguminous plant Sesbania rostrata, showed low, constitutive levels of endoglucanase (Egl) activity. A clone carrying the gene responsible for this phenotype was isolated via introduction of a genomic library into the wild-type strain and screening for transconjugants with enhanced Egl activity. By subcloning and expression in Escherichia coli, the Egl phenotype was allocated to a 3-kb EcoRI-BamHI fragment. However, sequence analysis showed the egl gene to be much larger, consisting of an open reading frame of 1,836 amino acids. Within the deduced polypeptide, three kinds of putative domains were identified: a catalytic domain, two cellulose-binding domains, and an eightfold reiterated motif. The catalytic domain belongs to the family A of cellulases. A C-terminal stretch of 100 amino acids was similar to family II cellulose-binding domains. A second copy of this domain occurred near the middle of the polypeptide, flanked by reiterated motifs. ORS571 mutants carrying a Tn5 insertion in the egl gene had lost the Egl activity. These mutants as well as Egl-overproducing strains showed a normal nodulation behavior, indistinguishable from wild-type nodulation on Sesbania rostrata under laboratory conditions.     

Sequence analysis of the Clostridium cellulolyticum endoglucanase-A-encoding gene, celCCA

The nucleotide sequence of a Clostridium cellulolyticum endo-beta-1,4- glucanase (EGCCA)-encoding gene (celCCA) and its flanking regions, was determined. An open reading frame (ORF) of 1425 bp was found, encoding a protein of 475 amino acids (aa). This ORF began with an ATG start codon and ended with a TAA ochre stop codon. The N-terminal region of the EGCCA protein resembled a typical signal sequence of a Gram-positive bacterial extracellular protein. A putative signal peptidase cleavage site was determined. EGCCA, without a signal peptide, was found to be composed of more than 35% hydrophobic aa and to have an Mr of 50715. Comparison of the encoded sequence with other known cellulase sequences showed the existence of various kinds of aa sequence homologies. First, a strong homology was found between the C-terminal region of EGCCA, containing a reiterated stretch of 24 aa, and the conserved reiterated region previously found to exist in four Clostridium thermocellum endoglucanases and one xylanase from the same organism. This region was suspected of playing a role in organizing the cellulosome complex. Second, an extensive homology was found between EGCCA and the N-terminal region of the large endoglucanase, EGE, from C. thermocellum, which suggests that they may have a common ancestral gene. Third, a region, which extended for 21 aa residues beginning at aa + 127, was found to be homologous with regions of cellulases belonging to Bacilli, Clostridia and Erwinia chrysanthemi.     

Overproduction of a Clostridium cellulolyticum endoglucanase by mutant strains of Escherichia coli

We have studied the expression of an endoglucanase from Clostridium cellulolyticum in mutant strains of Escherichia coli that overproduce haemolysin. When these mutants were transformed with plasmids encoding the endoglucanase, they showed a significantly enhanced endoglucanase activity, compared to transformed parental strains. Among the mutants, strain Hha-2 showed the highest production. We have identified the endoglucanase gene product synthesized in E. coli Hha-2/pBP8 and detected an increased amount of the enzyme parallel to the increase of endoglucanase activity. This was mainly localized in the periplasm and only a small percentage of it was found in the culture fluid.     

High activity of inclusion bodies formed in Escherichia coli overproducing Clostridium thermocellum endoglucanase D

The formation of cytoplasmic inclusion bodies by Escherichia coli overproducing Clostridium thermocellum endoglucanase D (EGD) was investigated. EGD was found in inclusion bodies as a 68 kDa form, whereas the size of the cytoplasmic form was 65 kDa. Upon solubilization with urea followed by dialysis, the 68 kDa form was converted to the 65 kDa species. Proteolysis occurred within the COOH-terminal, reiterated region of the 68 kDa form, which is conserved among most C. thermocellum endoglucanases, but is not required for catalytic activity. The specific activity of the enzyme embedded in inclusion bodies was close to that of the purified protein. Thus, inclusion body formation does not involve denaturation of the catalytic domain of EGD, but, more likely, the participation of the reiterated, conserved region in intermolecular interactions.     

Interaction between the endoglucanase CelA and the scaffolding protein CipC of the Clostridium cellulolyticum cellulosome.

The 5' end of the cipC gene, coding for the N-terminal part of CipC, the scaffolding protein of Clostridium cellulolyticum ATCC 35319, was cloned and sequenced. It encodes a 586-amino-acid peptide, including several domains: a cellulose-binding domain, a hydrophilic domain, and two hydrophobic domains (cohesin domains). Sequence alignments showed that the N terminus of CipC and CbpA of C. cellulovorans ATCC 35296 have the same organization. The mini-CipC polypeptide, containing a cellulose-binding domain, hydrophilic domain 1, and cohesin domain 1, was overexpressed in Escherichia coli and purified. The interaction between endoglucanase CelA, with (CelA2) and without (CelA3) the characteristic clostridial C-terminal domain called the duplicated-segment or dockerin domain, and the mini-CipC polypeptide was monitored by two different methods: the interaction Western blotting (immunoblotting) method and binding assays with biotin-labeled protein. Among the various forms of CelA (CelA2, CelA3, and an intermediary form containing only part of the duplicated segment), only CelA2 was found to interact with cohesin domain 1 of CipC. The apparent equilibrium dissociation constant of the CelA2-mini-CipC complex was 7 x 10(-9)M, which indicates that there exists a high affinity between these two proteins.     

The processive endocellulase CelF, a major component of the Clostridium cellulolyticum cellulosome: purification and characterization of the recombinant form.

The recombinant form of the cellulase CelF of Clostridium cellulolyticum, tagged by a C-terminal histine tail, was overproduced in Escherichia coli. The fusion protein was purified by affinity chromatography on a Ni-nitrilotriacetic acid column. The intact form of CelF (Mr, 79,000) was rapidly degraded at the C terminus, giving a shorter stable form, called truncated CelF (Mr, 71,000). Both the entire and the truncated purified forms degraded amorphous cellulose (kcat = 42 and 30 min(-1), respectively) and microcrystalline cellulose (kcat = 13 and 10 min(-1), respectively). The high ratio of soluble reducing ends to insoluble reducing ends released by truncated CelF from amorphous cellulose showed that CelF is a processive enzyme. Nevertheless, the diversity of the cellodextrins released by truncated CelF from phosphoric acid-swollen cellulose at the beginning of the reaction indicated that the enzyme might randomly hydrolyze beta-1,4 bonds. This hypothesis was supported by viscosimetric measurements and by the finding that CelF and the endoglucanase CelA are able to degrade some of the same cellulose sites. CelF was therefore called a processive endocellulase. The results of immunoblotting analysis showed that CelF was associated with the cellulosome of C. cellulolyticum. It was identified as one of the three major components of cellulosomes. The ability of the entire form of CelF to interact with CipC, the cellulosome integrating protein, or mini-CipC1, a recombinant truncated form of CipC, was monitored by interaction Western blotting (immunoblotting) and by binding assays using a BIAcore biosensor-based analytical system.     

Towards designer cellulosomes in Clostridia: mannanase enrichment of the cellulosomes produced by Clostridium cellulolyticum

The man5K gene of Clostridium cellulolyticum was cloned and overexpressed in Escherichia coli. This gene encodes a 424-amino-acid preprotein composed of an N-terminal leader peptide, followed by a dockerin module and a C-terminal catalytic module belonging to family 5 of the glycosyl hydrolases. Mature Man5K displays 62% identity with ManA from Clostridium cellulovorans. Two forms of the protein were purified from E. coli; one form corresponds to the full-length enzyme (45 kDa), and a truncated form (39 kDa) lacks the N-terminal dockerin module. Both forms exhibit the same typical family 5 mannanase substrate preference; they are very active with the galactomannan locust bean gum, and the more galacto-substituted guar gum molecules are degraded less. The truncated form, however, displays fourfold-higher activity with galactomannans than the full-length enzyme. Man5K was successfully overproduced in C. cellulolyticum by using expression vectors. The trans-produced protein was found to be incorporated into the cellulosomes and became one of the major enzymatic components. Modified cellulosomes displayed 20-fold-higher specific activities than control fractions on galactomannan substrates, whereas the specific activity on crystalline cellulose was reduced by 20%. This work clearly showed that the composition of the cellulosomes is obviously regulated by the relative amounts of the enzymes produced and that this composition can be engineered in clostridia by structural gene cloning.     

X-Ray crystal structure of the multidomain endoglucanase Cel9G from Clostridium cellulolyticum complexed with natural and synthetic cello-oligosaccharides

Complete cellulose degradation is the first step in the use of biomass as a source of renewable energy. To this end, the engineering of novel cellulase activity, the activity responsible for the hydrolysis of the beta-1,4-glycosidic bonds in cellulose, is a topic of great interest. The high-resolution X-ray crystal structure of a multidomain endoglucanase from Clostridium cellulolyticum has been determined at a 1.6-A resolution. The endoglucanase, Cel9G, is comprised of a family 9 catalytic domain attached to a family III(c) cellulose-binding domain. The two domains together form a flat platform onto which crystalline cellulose is suggested to bind and be fed into the active-site cleft for endolytic hydrolysis. To further dissect the structural basis of cellulose binding and hydrolysis, the structures of Cel9G in the presence of cellobiose, cellotriose, and a DP-10 thio-oligosaccharide inhibitor were resolved at resolutions of 1.7, 1.8, and 1.9 A, respectively.     

Cloning of a Clostridium thermocellum DNA fragment encoding polypeptides that bind the catalytic components of the cellulosome

A test based on the binding of 125I-labelled endoglucanase CelD was used to clone a DNA region encoding at least two different polypeptides that interact with the conserved reiterated segment present in many catalytic components of the Clostridium thermocellum cellulosome. One of the polypeptides corresponds to the COOH-terminal region of the SL (or S1) component of the cellulosome (U.T. Gerngross and A.L. Demain, personal communication). It comprises repeated domains that are responsible for binding 125I-labelled CelD, and presumably represent anchoring sites for the various catalytic components of the cellulosome. The other polypeptide is encoded by a gene that has not yet been described.     

Characterization and comparison of Clostridium cellulovorans endoglucanases-xylanases EngB and EngD hyperexpressed in Escherichia coli.

By the use of a T7 expression system, endoglucanases-xylanases EngB and EngD from Clostridium cellulovorans were hyperexpressed and purified from Escherichia coli. The two enzymes demonstrated both endoglucanase and xylanase activities. The substrate specificities of both endoglucanases were similar except that EngD had four-times-greater p-nitrophenyl beta-1,4-cellobiosidase activity. The two proteins were very homologous (80%) up to the Pro-Thr-Thr region which divided the protein into -NH2- and -COOH-terminals. The -COOH- region of EngB has high homology to the endoglucanases and a xylanase from Clostridium thermocellum and to an endoglucanase from Clostridium cellulolyticum and did not show strong binding to cellulose (Avicel). However, the -COOH- region of EngD, which had homology to the cellulose-binding domains of Cellulomonas fimi exo- and endoglucanases and to Pseudomonas fluorescens endoglucanase, demonstrated binding ability to cellulose even when the domain was fused to the N-terminal domain of EngB. By probing the Avicel-purified cellulase complex (F8) with anti-EngB and anti-EngD antibodies, both EngB and EngD were shown to be present on the cellulase complex of C. cellulovorans. Many proteins homologous to EngB and EngD were also present on the complex.     

Nucleotide sequence of the celG gene of Clostridium thermocellum and characterization of its product, endoglucanase CelG.

The nucleotide sequence of the celG gene of Clostridium thermocellum, encoding endoglucanase CelG, was determined. The open reading frame extended over 1,698 bp and encoded a 566-amino-acid polypeptide (molecular weight of 63,128) similar to the C. thermocellum endoglucanase CelB (51.5% identical residues). The N terminus displayed a typical signal peptide, followed by a catalytic domain. The C terminus, which was separated from the catalytic domain by a 25-amino-acid segment rich in Pro, Thr, and Ser, contained two conserved stretches of 22 amino acids closely similar to those previously described in other cellulases from the same organism. Expression of the gene in Escherichia coli was increased by fusing the fragment coding for the catalytic domain in frame with the start of the lacZ' gene present in the vector. A low- and a high-M(r) form of the protein were purified. The two forms displayed identical enzymatic properties. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis showed that both forms consist of a major polypeptide of M(r) 50,000 and two minor polypeptides of M(r)s 49,000 and 48,000, resulting from heterogeneous proteolytic cleavage at the C terminus. An antiserum raised against the forms purified from E. coli reacted with an immunoreactive polypeptide of M(r) 66,000, which was associated with the extracellular cellulolytic complex of C. thermocellum known as the cellulosome.     

Engineering a family 9 processive endoglucanase from Paenibacillus barcinonensis displaying a novel architecture

Cel9B from Paenibacillus barcinonensis is a modular endoglucanase with a novel molecular architecture among family 9 enzymes that comprises a catalytic domain (GH9), a family 3c cellulose-binding domain (CBM3c), a fibronectin III-like domain repeat (Fn3_1,2), and a C-terminal family 3b cellulose-binding domain (CBM3b). A series of truncated derivatives of endoglucanase Cel9B have been constructed and characterized. Deletion of CBM3c produced a notable reduction in hydrolytic activity, while it did not affect the cellulose-binding properties as CBM3c did not show the ability to bind to cellulose. On the contrary, CBM3b exhibited binding to cellulose. The truncated forms devoid of CBM3b lost cellulose-binding ability and showed a reduced activity on crystalline cellulose, although activity on amorphous celluloses was not affected. Endoglucanase Cel9B produced only a small ratio of insoluble products from filter paper, while most of the reducing ends produced by the enzyme were released as soluble sugars (91%), indicating that it is a processive enzyme. Processivity of Cel9B resides in traits contained in the tandem of domains GH9–CBM3c, although the slightly reduced processivity of truncated form GH9–CBM3c suggests a minor contribution of domains Fn3_1,2 or CBM3b, not contained in it, on processivity of endoglucanase Cel9B.     

Cloning, sequencing, and expression of the gene encoding Clostridium paraputrificum chitinase ChiB and analysis of the functions of novel cadherin-like domains and a chitin-binding domain.

The Clostridium paraputrificum chiB gene, encoding chitinase B (ChiB), consists of an open reading frame of 2,493 nucleotides and encodes 831 amino acids with a deduced molecular weight of 90,020. The deduced ChiB is a modular enzyme composed of a family 18 catalytic domain responsible for chitinase activity, two reiterated domains of unknown function, and a chitin-binding domain (CBD). The reiterated domains are similar to the repeating units of cadherin proteins but not to fibronectin type III domains, and therefore they are referred to as cadherin-like domains. ChiB was purified from the periplasm fraction of Escherichia coli harboring the chiB gene. The molecular weight of the purified ChiB (87,000) by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) analysis, was in good agreement with the value (86,578) calculated from the deduced amino acid sequence excluding the signal peptide. ChiB was active toward chitin from crab shells, colloidal chitin, glycol chitin, and 4-methylumbelliferyl beta-D-N,N'-diacetylchitobioside [4-MU-(GlcNAc)2]. The pH and temperature optima of the enzyme were 6.0 and 45 degrees C, respectively. The Km and Vmax values for 4-MU-(GlcNAc)2 were estimated to be 6.3 microM and 46 micromol/min/mg, respectively. SDS-PAGE, zymogram, and Western blot analyses using antiserum raised against purified ChiB suggested that ChiB was one of the major chitinase species in the culture supernatant of C. paraputrificum. Deletion analysis showed clearly that the CBD of ChiB plays an important role in hydrolysis of native chitin but not processed chitin such as colloidal chitin.     

Cellulase complex from Chaetomium cellulolyticum: isolation and properties of major components.

Four major components of the cellulase complex of Chaetomium cellulolyticum have been isolated by gel-filtration, ion-exchange chromatography on DEAE-Toyopearl and Macro Prep Q, and chromatofocusing on Mono P. These components include three endoglucanases (19, 35, and 40 kD) and a cellobiohydrolase (45 kD). The isoelectric points of the enzymes vary from 3.8 to 4.2. The optimal pH values for catalytic activity are in the range 4.5-6.0, and the optimal temperatures are in the range 60-70 degrees C. Of these enzymes the 19 kD endoglucanase is the most stable; it retained high activity within a broad pH range (from 5.0 to 9.6) at 50 degrees C for 3 h. This enzyme also had the highest topolytic activity determined by the efficiency of removal of indigo from the surface of cotton.