A 3D quantitative comparison of trapezium and trapezoid relative articular and nonarticular surface areas in modern humans and great apes

The structure and functions of the modern human hand are critical components of what distinguishes Homo sapiens from the great apes (Gorilla, Pan, and Pongo). In this study, attention is focused on the trapezium and trapezoid, the two most lateral bones of the distal carpal row, in the four extant hominid genera, representing the first time they have been quantified and analyzed together as a morphological-functional complex. Our objective is to quantify the relative articular and nonarticular surface areas of these two bones and to test whether modern humans exhibit significant shape differences from the great apes, as predicted by previous qualitative analyses and the functional demands of differing manipulative and locomotor strategies. Modern humans were predicted to show larger relative first metacarpal and scaphoid surfaces on the trapezium because of the regular recruitment of the thumb during manipulative behaviors; alternatively, great apes were predicted to show larger relative second metacarpal and scaphoid surfaces on the trapezoid because of the functional demands on the hands during locomotor behaviors. Modern humans were also expected to exhibit larger relative mutual joint surfaces between the trapezoid and adjacent carpals than do the great apes because of assumed transverse loads generated by the functional demands of the modern human power grip. Using 3D bone models acquired through laser digitizing, the relative articular and nonarticular areas on each bone are quantified and compared. Multivariate analyses of these data clearly distinguish modern humans from the great apes. In total, the observed differences between modern humans and the great apes support morphological predictions based on the fact that this region of the human wrist is no longer involved in weight-bearing during locomotor behavior and is instead recruited solely for manipulative behaviors. The results provide the beginnings of a 3D comparative standard against which further extant and fossil primate wrist bones can be compared within the contexts of manipulative and locomotor behaviors.     

Connective tissue reinforcing structures of the digital tendon sheaths of the human hand

At a greater number of humid preparated human hands, all the ligamentous supports of the digital tendon sheath were exposed and their dimensions were determined. The osteofibrous channels, which contain the long flexor tendons of the digits, were bounded on the one hand by transversely concave shaft areas of the phalanges and the palmar ligaments and on the other side by the fibrous parts of the tendon sheath. From the second to the 5th finger, it has a regular extension of length, which begins proximal at the heads of the metacarpal bones and runs distal to the base of the nail phalanx. In some cases, there is a continuous communication between the digital tendon sheath of the little finger and the carpal synovial sheath. The tendon sheath of the flexor pollicis longus muscle in comparison with it is always in an open communication with the radial synovial sac of the wrist. At the fibrous supports of the digital tendon sheath, one can find constant and inconstant ligamentous structures. Regular shaped ligaments consist of annular fibers (A1 to A5). The proximal complex of fiber supports is a formation of the A1 and A2 ligaments. The band A1 can be divided into 2 ligaments both of roughly equal length, which lay between the head of the metacarpal bone and the base of the proximal phalanx. The strongest fibrous support of the whole digital tendon sheath represents the band A2. It is attached to the midth of the proximal phalanx and increases in strength from proximal to distal. The middle length varies between 6.7 mm at the thumb and 18.7 mm at the middle finger. The distal margin is strengthened by fibrocartilage tissue to be in accordance with the important function as a pulley. The annular band A4 forms the distal supporting complex height above the shaft of the middle phalanx. At the 2nd to the 5th finger it is, with a middle length of 6 to 7 mm, very much shorter than A2 and restrains first of all the tendon of the flexor digitorum profundus muscle. In the area of the interphalangeal joints, we can find the annular bands A3 and A5, which fiber texture is formed variable. Both ligaments are attached on either both sides with the joint capsule and the palmar plate. The other inconstant supports of the digital sheaths are systematically recorded indeed (C1 to C3), but only in exceptional cases they exist of cruciform fibers (Lig. cruciatum).(ABSTRACT TRUNCATED AT 400 WORDS)     

The morphology of the thumb carpometacarpal joint does not differ between men and women,but changes with aging and early osteoarthritis

The high prevalence of thumb carpometacarpal (CMC) joint osteoarthritis (OA) in women has been previously linked to the articular morphology of the trapezium. Studies report conflicting results on how the articular shapes of male and female trapezia compare to one another, however, mainly because their findings are based on data from older cadaveric specimens. The purpose of this in vivo study was to dissociate the effect of sex from that of aging and early OA by using cohorts of healthy young and healthy older subjects, as well as patients with early stage OA. Computed tomography scans from 68 healthy subjects and 87 arthritic subjects were used to obtain 3-D bone models. The trapezial and metacarpal articular surfaces were manually delineated on scaled bone models and compared between sex, age, and health groups by using polar histograms of curvature and average curvatures. We found no sex-related differences, but significant age-group and health-group differences, in the articular surfaces of both bones. Older healthy subjects had higher curvature in the concave and lower curvature in the convex directions of both the trapezial and metacarpal saddles than healthy young subjects. Subjects with early OA had significantly different metacarpal and trapezial articular shapes from healthy subjects of the same age group. These findings suggest that aging and OA affect the articular shape of the CMC joint, but that, in contrast to previously held beliefs, inherent sex differences are not responsible for the higher incidence of CMC OA in women.     

Method for the estimation of a double hinge kinematic model for the trapeziometacarpal joint using MR imaging

In this paper, we propose a method to estimate the parameters of a double hinge model of the trapeziometacarpal joint (TMC) by MRI-based motion analysis. The model includes two non-orthogonal and non-intersecting rotation axes accounting for flexion–extension (F–E) and adduction–abduction (A–A). We evaluated the quality of the estimated model parameters in the prediction of the relative motion of the first metacarpal bone with respect to the trapezium. As a result, we obtained that: (a) the estimated location and orientation of the F–E and A–A axes were in agreement with previous in vitro studies, (b) the motion of the first metacarpal predicted by the 2 degrees of freedom (2DoF) model exhibits a maximum surface distance error in the range of about 2 mm and (c) four thumb postures at the boundary of the TMC range of motion are sufficient to provide a good estimation of the 2DoF TMC kinematic model and good reproducibility (～1.7 mm) of the real thumb motion at TMC level.     

Osteoarthritis of the First Carpometacarpal Joint

The first carpometacarpal (trapeziometacarpal) joints are a frequent site of osteoarthritis in postmenopausal women. This osteoarthritis, which is typically bilateral both clinically and roentgenographically, may be mistaken for tenosynovitis unless its characteristic features are recognized. These features include tenderness, stiffness, crepitus, swelling, and pain on wringing movements or other motions that cause abduction of the thumb. The swelling, radial subluxation of the metacarpal and atrophy of the thenar muscles give the hand a squared appearance.In severe cases, conservative medical therapy is generally unsatisfactory. Intra-articular corticosteroids and local anesthetic give only transient relief. Results of surgical therapy, including excision of the trapezium or arthrodesis of the trapeziometacarpal joint, were in general good. Distinct indications exist for each type of operation.     

Robusticity and osteoarthritis at the trapeziometacarpal joint in a Bronze Age population from Tell Abraq, United Arab Emirates

Osteoarthritis (OA) is a progressive disease of the joints and can cause pain, reduced range of motion and strength, and ultimately loss of function at affected joints. Osteoarthritis often occurs at sites where biomechanical stress is acutely severe or moderate but habitual over the course of a lifetime. Skeletal remains from an Umm an-Nar tomb at Tell Abraq, United Arab Emirates (ca. 2300 BC), were recovered and represented over 300 individuals of all ages. The remains were disarticulated, commingled, and mostly fragmented. An analysis of 650 well-preserved adult metacarpal and carpal bones, from the tomb's western chamber, revealed that over 53% of the trapeziometacarpal joint facets showed signs of OA varying from mild to severe. The first and second metacarpals and trapezium bones were sided and evaluated for OA at the trapeziometacarpal joint articulations. Osteoarthritis was detected on 53% of the first metacarpals, 40% of the second metacarpals, and 57% of the trapezium bones. All specimens appeared enlarged, and the first metacarpals were assessed for sexual identification and robusticity. Eighty-five percent of the bones were probable males, and more than 80% of them had a robusticity index of 60 or higher. A strong correlation was found between OA, sex, and robusticity. High levels of OA and robusticity at the thumb suggest that the people of Tell Abraq were habitually involved in biomechanically challenging work with their hands.     

A joint coordinate system proposal for the study of the trapeziometacarpal joint kinematics

The International Society of Biomechanics (ISB) has recommended a standardisation for the motion reporting of almost all human joints. This study proposes an adaptation for the trapeziometacarpal joint. The definition of the segment coordinate system of both trapezium and first metacarpal is based on functional anatomy. The definition of the joint coordinate system (JCS) is guided by the two degrees of freedom of the joint, i.e. flexion-extension about a trapezium axis and abduction-adduction about a first metacarpal axis. The rotations obtained using three methods are compared on the same data: the fixed axes sequence proposed by Cooney et al., the mobile axes sequence proposed by the ISB and our alternative mobile axes sequence. The rotation amplitudes show a difference of 9 degrees in flexion-extension, 2 degrees in abduction-adduction and 13 degrees in internal-external rotation. This study emphasizes the importance of adapting the JCS to the functional anatomy of each particular joint.     

Modeling of the muscle/tendon excursions and moment arms in the thumb using the commercial software anybody

A biomechanical model of a thumb would be useful for exploring the mechanical loadings in the musculoskeletal system, which cannot be measured in vivo. The purpose of the current study is to develop a practical kinematic thumb model using the commercial software Anybody (Anybody Technology, Aalborg, Denmark), which includes real CT-scans of the bony sections and realistic tendon/muscle attachments on the bones. The thumb model consists of a trapezium, a metacarpal bone, a proximal and a distal phalanx. These four bony sections are linked via three joints, i.e., IP (interphalangeal), MP (metacarpophalangeal) and CMC (carpometacarpal) joints. Nine muscles were included in the proposed model. The theoretically calculated moment arms of the tendons are compared with the corresponding experimental data by Smutz et al. [1998. Mechanical advantage of the thumb muscles. J. Biomech. 31(6), 565–570]. The predicted muscle moment arms of the majority of the muscle/tendon units agree well with the experimental data in the entire range of motion. Close to the end of the motion range, the predicted moment arms of several muscles (i.e., ADPt and ADPo (transverse and oblique heads of the adductor pollicis, respectively) muscles for CMC abduction/adduction and ADPt and FPB (flexor pollicis brevis) muscle for MP extension/flexion) deviate from the experimental data. The predicted moment potentials for all muscles are consistent with the experimental data. The findings thus suggest that, in a biomechanical model of the thumb, the mechanical functions of muscle–tendon units with small physiological cross-sectional areas (PCSAs) can be well represented using single strings, while those with large PCSAs (flat-wide attachments, e.g., ADPt and ADPo) can be represented by the averaged excursions of two strings. Our results show that the tendons with large PCSAs can be well represented biomechanically using the proposed approach in the major range of motion.     

Biomechanics of the joints of the large toe. Shape and movement of the first tarsometatarsal joint and of the medial cuneonavicular joint]

90% of the first (hallucal) tarsometatarsal joints are screw-shaped; the axis is directed upwards to the front touching the lateral edge of the joint. Thus the plantar flexion is inevitably accompanied by an adduction and a pronation, and vice versa a dorsiflexion is consequently accompanied by an abduction and a supination, when the articular surfaces exactly slide along each other. 10% of these joints, however, are ellipsoid-shaped; in this case the distal articular surface of the medial cuneiform bone has the form of an ovoid head, and a strong ligament situated next to the lateral edge of the joint effects the same kind of motion described above. The medial cuneonavicular joint is always ellipsoid-shaped, the head of which is made up by the medial facet of the distal articular surface of the navicular bone. Each of the two joints mentioned has a considerable range of mobility.     

A joint coordinate system proposal for the study of the trapeziometacarpal joint kinematics

The International Society of Biomechanics (ISB) has recommended a standardisation for the motion reporting of almost all human joints. This study proposes an adaptation for the trapeziometacarpal joint.

The definition of the segment coordinate system of both trapezium and first metacarpal is based on functional anatomy. The definition of the joint coordinate system (JCS) is guided by the two degrees of freedom of the joint, i.e. flexion–extension about a trapezium axis and abduction–adduction about a first metacarpal axis. The rotations obtained using three methods are compared on the same data: the fixed axes sequence proposed by Cooney et al., the mobile axes sequence proposed by the ISB and our alternative mobile axes sequence. The rotation amplitudes show a difference of 9° in flexion–extension, 2° in abduction–adduction and 13° in internal–external rotation.

This study emphasizes the importance of adapting the JCS to the functional anatomy of each particular joint.     

A biomechanical analysis of finger joint forces and stresses developed during common daily activities

The problem of modelling stresses incurred at the finger joints is critical to the design of durable joint replacements in the hand. The goal of this study was to characterise the forces and stresses at the finger and thumb joints occurring during activities such as typing at a keyboard, playing piano, gripping a pen, carrying a weight and opening a jar. The metacarpal and proximal phalanx were modelled using a COMSOL-based finite element analysis. Analysis of these activities indicates that joint forces in excess of 100 N may be common at the metacarpophalangeal joint (MCP) due to carrying objects such as groceries or while opening jars. The model predicted that stresses in excess of 2 MPa, similar to stresses at the hip, occur at the MCP with the properties of cancellous bone playing a significant role in the magnitude and distribution of stress.     

Morphological correlates of the first metacarpal proximal articular surface with manipulative capabilities in apes,humans and South African early hominins

This study quantifies the metacarpal 1 (MC 1) proximal articular surface using three-dimensional morphometrics in extant hominids and fossil hominins (SK 84, cf. Paranthropus robustus/Homo erectus and StW 418, Australopithecus africanus) to understand which characteristics of the proximal metacarpal 1 are potentially correlated with human manipulative abilities and if they can be used in a paleoanthropological setting. A principal components (PC) analysis was used to compare MC 1 proximal articular surface shape and ANOVA and Tukey's HSD post-hoc tests were conducted to determine differences among groups. Homo is significantly different from nonhuman hominids having a less radioulnarly and dorsovolarly curved articular surface. All nonhuman hominids have more curved articular surface with Gorilla showing the most curved joint. Moreover, this study highlights the presence of a radially extended surface in Homo that may be related to the greater thumb abduction in human manipulation activities. Both fossils analyzed show a great ape-like MC 1 proximal articular surface which, associated with recent trabecular and archaeological evidence, may indicate that the ability to make/use stone tools preceded the morphological adaptations associated today with such behavior.     

A biomechanical analysis of finger joint forces and stresses developed during common daily activities

The problem of modelling stresses incurred at the finger joints is critical to the design of durable joint replacements in the hand. The goal of this study was to characterise the forces and stresses at the finger and thumb joints occurring during activities such as typing at a keyboard, playing piano, gripping a pen, carrying a weight and opening a jar. The metacarpal and proximal phalanx were modelled using a COMSOL-based finite element analysis. Analysis of these activities indicates that joint forces in excess of 100 N may be common at the metacarpophalangeal joint (MCP) due to carrying objects such as groceries or while opening jars. The model predicted that stresses in excess of 2 MPa, similar to stresses at the hip, occur at the MCP with the properties of cancellous bone playing a significant role in the magnitude and distribution of stress.     

Clinical anatomy of the m. flexor carpi radialis tendon sheath

At the transitional zone from the forearm to the hand the insertion tendon of the m.flexor carpi radialis (FCR) glides on a fibrous and fatty cushion, which is connected dorsally with the joint capsule of the radiocarpal articulation. The tendon distally crosses the palmar side of the scaphoid tubercle and enters the dorsally curved rim of the trapezoid tubercle. At the level of the wrist joint the narrow tendon sheath begins, which extends to the insertion at the metacarpus. Immediately after entering the gliding tunnel the tendon branches off radially as a rule with an accessory fibre strand 8 mm in width to the scaphoid, trapezium and the joint capsule between these two bones. The insertion tendon regularly is attached to the palmar and radial surfaces of the second and third metacarpal bones. The wall of the osteofibrous gliding tunnel can be prominent following trauma, inflammation or arthrosis deformans in the trapezio-scaphoideal joint and may irritate the tendon (tendovaginosis stenosans). Against resistance forces pain will occur in the wrist joint during palmar flexion. The typical point of tenderness is situated at the entering of the tendon in the thenar region. Operative decompression will be effective by opening the radial wall of the tendon sheath from the carpal tunnel.     

The use of basis functions in modelling joint articular surfaces: application to the knee joint

This article introduces a new method to represent bone surface geometry for simulations of joint contact. The method uses the inner product of two basis functions to provide a mathematical representation of the joint surfaces. This method guarantees a continuous transition in the direction of the surface normals, an important property for computation of joint contact. Our formulation handles experimental data that are not evenly distributed, a common characteristic of digitized data of musculoskeletal morphologies. The method makes it possible to represent highly curved surfaces, which are encountered in many anatomical structures. The accuracy of this method is demonstrated by modeling the human knee joint. The mean relative percentage error in the representation of the patellar track surface was 0.25% (range 0-1.56%) which corresponded to an absolute error of 0.17mm (range 0-0.16mm).     

Articular constraint, handedness, and directional asymmetry in the human second metacarpal

The hypothesis that functional adaptation of joint surfaces to mechanical loading occurs primarily through change in mass, density, and structure of subarticular trabeculae (the "articular constraint" model) is investigated through an analysis of directional asymmetry among three separate bone compartments in the human second metacarpal. Measures of midshaft cross-sectional geometry, osteometry of the distal epiphysis, and subarticular trabecular microarchitecture of the distal epiphysis (assessed by high-resolution microcomputed tomography) were determined for 29 paired male and female metacarpals from a well-preserved nineteenth-century Euro-Canadian historic cemetery sample. For each measure, asymmetry was quantified using both mean-difference and confidence-interval methods. Both methods found a significant right-hand bias for measures of structural strength in midshaft geometry, as has been previously noted for this sample. Articular size, however, exhibits a right-hand bias only with regard to mediolateral, and not dorsopalmar, dimensions, a result that may reflect directional asymmetry in hand breadth at the distal palmar arch. The most striking asymmetries occur for subarticular trabecular microarchitecture. The right metacarpal head exhibits greater bone volume fraction, bone surface density, trabecular number, connectivity, and a more platelike rather than rodlike structure. These outcomes confer greater resistance to both axial compressive and shear strains for the metacarpal head at the metacarpophalangeal arthrosis. In all, these results confirm and extend previous research documenting structural asymmetries and limb dominance and are consistent with the concept of articular constraint. They also suggest a morphological signal through which functional asymmetry associated with handedness in fossil hominins may be investigated.     

Chimpanzee thumb muscle cross sections, moment arms and potential torques, and comparisons with humans.

This study investigates the morphological basis of differences between humans and chimpanzees in the kinematical and dynamical parameters of the musculature of the thumb. It is partly intended to test an hypothesis that human thumb muscles can exert significantly greater torques, due to larger muscle cross-sectional areas or to longer tendon moment arms or to both. We focus on the estimation of the potentials of thumb muscles to exert torques about joint axes in a sample of eight chimpanzee cadaver hands. The potential torque of a muscle is estimated by taking the product of a muscle's physiological cross-sectional area (an estimator of force) with its dynamical moment arm (derived from the slope of tendon excursion versus joint angular displacement, obtained during passive movements of cadaver thumb joints). Comparison of our results with similar data obtained for humans at the same Mayo Clinic laboratory shows significant differences between humans and chimpanzees in potential torque of most thumb muscles, those of humans generally exhibiting larger values. The primary reason for the larger torques in humans is that their average moment arms are significantly longer, permitting greater torque for a given muscle size. An additional finding is that chimpanzees and humans differ in the direction of secondary thumb metacarpal movements elicited by contraction of some muscles, as shown by differences in moment arm signs for a given movement in the same muscle. The differences appear to be related to differences in the musculo-skeletal structures of the trapeziometacarpal joint.