Antibacterial cellulose fiber via RAFT surface graft polymerization

2-(dimethylamino)ethyl methacrylate (DMAEMA) was polymerized from cellulosic filter paper via reversible addition-fragmentation chain transfer (RAFT) polymerization. The tertiary amino groups of the grafted PDMAEMA chains were subsequently quaternized with alkyl bromides of different chain lengths (C8-C16) to provide a large concentration of quaternary ammonium groups on the cellulose surface. The antibacterial activity of the quaternized and nonquaternized PDMAEMA-grafted cellulosic fibers was tested against Escherichia coli. The antibacterial activity was found to depend on the alkyl chain length and on the degree of quaternization, i.e., the amount of quaternary amino groups present in the cellulose graft copolymers. The PDMAEMA-grafted cellulose fiber with the highest degree of quaternization and quaternized with the shortest alkyl chains was found to exhibit particularly high activity against E. coli.     

Dry biorefining maximizes the potentials of simultaneous saccharification and co‐fermentation for cellulosic ethanol production

Despite the well‐recognized merits of simultaneous saccharification and co‐fermentation (SSCF) on relieving sugar product inhibition on cellulase activity, a practical concomitance difficulty of xylose with inhibitors in the pretreated lignocellulose feedstock prohibits the essential application of SSCF for cellulosic ethanol fermentation. To maximize the SSCF potentials for cellulosic ethanol production, a dry biorefining approach was proposed starting from dry acid pretreatment, disk milling, and biodetoxification of lignocellulose feedstock. The successful SSCF of the inhibitor free and xylose conserved lignocellulose feedstock after dry biorefining reached a record high ethanol titer at moderate cellulase usage and minimum wastewater generation. For wheat straw, 101.4 g/L of ethanol (equivalent to 12.8% in volumetric percentage) was produced with the overall yield of 74.8% from cellulose and xylose, in which the xylose conversion was 73.9%, at the moderate cellulase usage of 15 mg protein per gram cellulose. For corn stover, 85.1 g/L of ethanol (equivalent to 10.8% in volumetric percentage) is produced with the overall conversion of 84.7% from cellulose and xylose, in which the xylose conversion was 87.7%, at the minimum cellulase usage of 10 mg protein per gram cellulose. Most significantly, the SSCF operation achieved the high conversion efficiency by generating the minimum amount of wastewater. Both the fermentation efficiency and the wastewater generation in the current dry biorefining for cellulosic ethanol production are very close to that of corn ethanol production, indicating that the technical gap between cellulosic ethanol and corn ethanol has been gradually filled by the advancing biorefining technology.     

Generic method for modular surface modification of cellulosic materials in aqueous medium by sequential "click" reaction and adsorption

A generic approach for heterogeneous surface modification of cellulosic materials in aqueous medium, applicable for a wide range of functionalizations, is presented. In the first step, carboxymethyl cellulose (CMC) modified with azide or alkyne functionality, was adsorbed on a cellulosic substrate, thus, providing reactive sites for azide-alkyne cycloaddition click reactions. In the second step, functional units with complementary click units were reacted on the cellulose surface, coated by the click-modified CMC. Selected model functionalizations on diverse cellulosic substrates are shown to demonstrate the generality of the approach. The concept by sequentially combining the robust physical adsorption ("physical click") and robust chemical reaction ("chemical click") allows versatile, simple, and environmentally friendly modification of a cellulosic substrate with virtually any azide- or alkyne-modified molecule and even functionalization with several types of units.     

Synthesis and antibacterial activity evaluation of a novel cotton fiber (Gossypium barbadense) ampicillin derivative

We prepared cellulose cotton fibers containing ampicillin moieties and evaluated their antibacterial activity. In spite of recent progress in experimental and clinical medicine, the problem of chronic wounds treatment remains to be solved. In fact conventional methods are based on solutions of antibiotics and antiseptics and ointment bandages but the efficacy of this method is low and so the idea to use modified cotton gauzes would have to prevent infections insorgence during wounds healing. Ampicillin, a large spectrum antibiotic, was covalently coupled to cellulose backbone of hydrophilic cotton fibers by a heterogeneous synthesis to produce a functionalized biopolymer with a satisfactory degree of substitution (DS) and antibacterial activity. The obtained biopolymer was characterized by infrared spectroscopy (FT-IR). Finally, the antibacterial activity in inhibiting microorganism growth in Petri dishes, was evaluated. The results suggested that these biomaterials posses an excellent “in vitro” antibacterial activity and so they can be efficiently employed in biomedical fields for chronic wounds management to ensure a valid protection against infections and contaminations. Biopolymers so functionalized were found to be very efficient to contrast sensible bacteria growth.     

Screening of cellulases for biofuel production: online monitoring of the enzymatic hydrolysis of insoluble cellulose using high-throughput scattered light detection

A new prospective cellulase assay simultaneously combining high-throughput, online analysis and insoluble cellulosic substrates is described. The hydrolysis of three different insoluble cellulosic substrates, catalysed by a commercial cellulase preparation from Trichoderma reesei (Celluclast), was monitored using the BioLector - allowing online monitoring of scattered light intensities in a continuously shaken microtiter plate. Cellulase activities could be quantitatively assayed using the BioLector. At low cellulase/cellulose ratios, the Michaelis-Menten parameters of the cellulase mixture were mainly affected by the crystallinity index of the cellulose. Here, the apparent maximum cellulase activities inversely correlated with the crystallinity index of the cellulose. At high cellulase/cellulose ratios the particle size of the cellulose, defining the external surface area accessible to the cellulases, was the key determining factor for cellulase activity. The developed technique was also successfully applied to evaluate the pH optimum of cellulases. Moreover, the non-hydrolytic deagglomeration of cellulose particles was investigated, for the first time, using high-throughput scattered light detection. In conclusion, this cellulase assay ideally links high-throughput, online analysis and realistic insoluble cellulosic substrates in one simple system. It will considerably simplify and accelerate fundamental research on cellulase screening.     

Cellulose accessibility limits the effectiveness of minimum cellulase loading on the efficient hydrolysis of pretreated lignocellulosic substrates

A range of lignocellulosic feedstocks (including agricultural, softwood and hardwood substrates) were pretreated with either sulfur dioxide-catalyzed steam or an ethanol organosolv procedure to try to establish a reliable assessment of the factors governing the minimum protein loading that could be used to achieve efficient hydrolysis. A statistical design approach was first used to define what might constitute the minimum protein loading (cellulases and β-glucosidase) that could be used to achieve efficient saccharification (defined as at least 70% glucan conversion) of the pretreated substrates after 72 hours of hydrolysis. The likely substrate factors that limit cellulose availability/accessibility were assessed, and then compared with the optimized minimum amounts of protein used to obtain effective hydrolysis. The optimized minimum protein loadings to achieve efficient hydrolysis of seven pretreated substrates ranged between 18 and 63 mg protein per gram of glucan. Within the similarly pretreated group of lignocellulosic feedstocks, the agricultural residues (corn stover and corn fiber) required significantly lower protein loadings to achieve efficient hydrolysis than did the pretreated woody biomass (poplar, douglas fir and lodgepole pine). Regardless of the substantial differences in the source, structure and chemical composition of the feedstocks, and the difference in the pretreatment technology used, the protein loading required to achieve efficient hydrolysis of lignocellulosic substrates was strongly dependent on the accessibility of the cellulosic component of each of the substrates. We found that cellulose-rich substrates with highly accessible cellulose, as assessed by the Simons' stain method, required a lower protein loading per gram of glucan to obtain efficient hydrolysis compared with substrates containing less accessible cellulose. These results suggest that the rate-limiting step during hydrolysis is not the catalytic cleavage of the cellulose chains per se, but rather the limited accessibility of the enzymes to the cellulose chains due to the physical structure of the cellulosic substrate.     

Antibacterial activity and chemical composition of Turkish propolis

The antibacterial activities of propolis samples have been examined in vitro, according to the principles accepted for the determination of a similar activity of antibiotics with the use of solid and liquid media. It has been found that propolis extracts showed antibacterial activity through a range of commonly encountered gram positive cocci (S. aureus, beta hem. Streptococus), but had weak activity against gram negative bacteria (E. coli, P. aeruginosa). GC/MS analysis showed that propolis samples contain a variety of chemical compounds including aromatic compounds, fatty acid esters and sesquiterpenes.     

纤维素乙醇统合加工过程中的酵母多酶共展示体系研究进展

利用统合生物加工过程(Consolidated bioprocessing,CBP)生产纤维素乙醇是目前国内外的研究热点。CBP需要一种“集成化”微生物,既能生产水解木质纤维素的多种酶类又能利用水解木质纤维素产生的糖类发酵产乙醇。以酿酒酵母表面展示技术为依托,建立CBP菌株多酶共展示体系的研究主要分为以下两个方向：一是直接将纤维素酶展示在细胞表面,即非复合型纤维素酶体系;另一种是通过表面展示纤维小体(Cellulosome)将纤维素酶间接地锚定在细胞表面,即复合型纤维素酶体系,本文主要从以上两个方向阐述了近几年对于纤维素乙醇生物统合加工过程的研究进展。因纤维小体对纤维素的降解能力比非复合型纤维素酶体系更强,所以其在酿酒酵母细胞表面的组装研究受到越来越多的关注,为了更深入透彻地了解纤维小体的酵母展示技术,文中对纤维小体的结构与功能及其在纤维素乙醇发酵中的应用研究进行重点论述,并对该领域的发展方向进行展望。     

Polyester coating of cellulose fiber surfaces catalyzed by a cellulose-binding module-Candida antarctica lipase B fusion protein

A new approach to introduce polymers to cellulosic materials was developed by using the ability of a cellulose-binding module-Candida antarctica lipase B conjugate to catalyze ring-opening polymerization of epsilon-caprolactone in close proximity to cellulose fiber surfaces. The epsilon-caprolactone was introduced to the cellulose surfaces either by simple addition of liquid monomer or through gas phase. The effects of water activity and temperature on the lipase-catalyzed polymerization process were investigated. Analysis showed that the water content in the system primarily regulated the obtained polymer molecular weight, whereas the temperature influenced the reaction rate. The hydrophobicity of the obtained surfaces did not arise from covalent attachment of the poly(epsilon-caprolactone) to the surface hydroxyl groups but rather from surface-deposited polymers which could be readily extracted. The degree of lipase-catalyzed hydrolysis through introduction of water to the polymer-coated cellulose fiber surfaces was also investigated and shown to be significant.     

Direct ethanol production from cellulosic materials at high temperature using the thermotolerant yeast Kluyveromyces marxianus displaying cellulolytic enzymes

To exploit cellulosic materials for fuel ethanol production, a microorganism capable of high temperature and simultaneous saccharification–fermentation has been required. However, a major drawback is the optimum temperature for the saccharification and fermentation. Most ethanol-fermenting microbes have an optimum temperature for ethanol fermentation ranging between 28 °C and 37 °C, while the activity of cellulolytic enzymes is highest at around 50 °C and significantly decreases with a decrease in temperature. Therefore, in the present study, a thermotolerant yeast, Kluyveromyces marxianus, which has high growth and fermentation at elevated temperatures, was used as a producer of ethanol from cellulose. The strain was genetically engineered to display Trichoderma reesei endoglucanase and Aspergillus aculeatus β-glucosidase on the cell surface, which successfully converts a cellulosic β-glucan to ethanol directly at 48 °C with a yield of 4.24 g/l from 10 g/l within 12 h. The yield (in grams of ethanol produced per gram of β-glucan consumed) was 0.47 g/g, which corresponds to 92.2% of the theoretical yield. This indicates that high-temperature cellulose fermentation to ethanol can be efficiently accomplished using a recombinant K. marxianus strain displaying thermostable cellulolytic enzymes on the cell surface.     

Cellulose solvent-based biomass pretreatment breaks highly ordered hydrogen bonds in cellulose fibers of switchgrass

The switchgrass (SG) samples pretreated by cellulose solvent‐ and organic solvent‐based lignocellulose fractionation were characterized by enzymatic hydrolysis, substrate accessibility assay, scanning electron microscopy, X‐ray diffraction (XRD), cross polarization/magic angle spinning (CP/MAS) ¹³C nuclear magnetic resonance (NMR), and Fourier transform infrared spectroscopy (FTIR). Glucan digestibility of the pretreated SG was 89% at hour 36 at one filter paper unit of cellulase per gram of glucan. Crystallinity index (CrI) of pure cellulosic materials and SG before and after cellulose solvent‐based pretreatment were determined by XRD and NMR. CrI values varied greatly depending on measurement techniques, calculation approaches, and sample drying conditions, suggesting that the effects of CrI data obtained from dried samples on enzymatic hydrolysis of hydrated cellulosic materials should be interpreted with caution. Fast hydrolysis rates and high glucan digestibilities for pretreated SG were mainly attributed to a 16.3‐fold increase in cellulose accessibility to cellulase from 0.49 to 8.0 m²/g biomass, because the highly ordered hydrogen‐bonding networks in cellulose fibers of biomass were broken through cellulose dissolution in a cellulose solvent, as evidenced by CP/MAS ¹³C‐NMR and FTIR. Biotechnol. Bioeng. 2011; 108:521–529. © 2010 Wiley Periodicals, Inc.     

Effect of Maize Biomass Composition on the Optimization of Dilute-Acid Pretreatments and Enzymatic Saccharification

At the core of cellulosic ethanol research are innovations leading to reductions in the chemical and energetic stringency of thermochemical pretreatments and enzymatic saccharification. In this study, key compositional features of maize cell walls influencing the enzymatic conversion of biomass into fermentable sugars were identified. Stem samples from eight contrasting genotypes were subjected to a series of thermal dilute-acid pretreatments of increasing severity and evaluated for glucose release after enzymatic saccharification. The biochemically diverse set of genotypes displayed significant differences in glucose yields at all processing conditions evaluated. The results revealed that mechanisms controlling biomass conversion efficiency vary in relation to pretreatment severity. At highly severe pretreatments, cellulose conversion efficiency was primarily influenced by the inherent efficacy of the thermochemical process, and maximum glucose yields were obtained from cellulosic feedstocks harboring the highest cellulose contents per dry gram of biomass. When mild dilute-acid pretreatments were applied, however, maximum bioconversion efficiency and glucose yields were observed for genotypes combining high stem cellulose contents, reduced cell wall lignin and highly substituted hemicelluloses. For the best-performing genotype, glucose yields under sub-optimal processing regimes were only 10 % lower than the genotype-set mean at the most stringent processing conditions evaluated, while furfural production was reduced by approximately 95 %. Our results ultimately established that cellulosic feedstocks with tailored cell wall compositions can help reduce the chemical and energetic intensity of pretreatments used in the industry and improve the commercial and environmental performance of biomass-to-ethanol conversion technologies.     

Escherichia coli expression and purification of four antimicrobial peptides fused to a family 3 carbohydrate-binding module (CBM) from Clostridium thermocellum

Antimicrobial peptides (AMPs) are molecules that act in a wide range of physiological defensive mechanisms developed to counteract bacteria, fungi, parasites and viruses. Several hundreds of AMPs have been identified and characterized. These molecules are presently gaining increasing importance, as a consequence of their remarkable resistance to microorganism adaptation. Carbohydrate-binding modules (CBMs) are non-catalytic domains that anchor glycoside hydrolases into complex carbohydrates. Clostridium thermocellum produces a multi-enzyme complex of cellulases and hemicellulases, termed the cellulosome, which is organized by the scaffoldin protein CipA. Binding of the cellulosome to the plant cell wall results from the action of CipA family 3 CBM (CBM3), which presents a high affinity for crystalline cellulose. Here CipA family 3 CBM was fused to four different AMPs using recombinant DNA technology and the fusion recombinant proteins were expressed at high levels in Escherichia coli cells. CBM3 does not present antibacterial activity and does not bind to the bacterial surface. However, the four recombinant proteins retained the ability to bind cellulose, suggesting that CBM3 is a good candidate polypeptide to direct the binding of AMPs into cellulosic supports. A comprehensive characterization of the antimicrobial activity of the recombinant fusion proteins is currently under evaluation.     

Direct and efficient production of ethanol from cellulosic material with a yeast strain displaying cellulolytic enzymes

For direct and efficient ethanol production from cellulosic materials, we constructed a novel cellulose-degrading yeast strain by genetically codisplaying two cellulolytic enzymes on the cell surface of Saccharomyces cerevisiae. By using a cell surface engineering system based on alpha-agglutinin, endoglucanase II (EGII) from the filamentous fungus Trichoderma reesei QM9414 was displayed on the cell surface as a fusion protein containing an RGSHis6 (Arg-Gly-Ser-His(6)) peptide tag in the N-terminal region. EGII activity was detected in the cell pellet fraction but not in the culture supernatant. Localization of the RGSHis6-EGII-alpha-agglutinin fusion protein on the cell surface was confirmed by immunofluorescence microscopy. The yeast strain displaying EGII showed significantly elevated hydrolytic activity toward barley beta-glucan, a linear polysaccharide composed of an average of 1,200 glucose residues. In a further step, EGII and beta-glucosidase 1 from Aspergillus aculeatus No. F-50 were codisplayed on the cell surface. The resulting yeast cells could grow in synthetic medium containing beta-glucan as the sole carbon source and could directly ferment 45 g of beta-glucan per liter to produce 16.5 g of ethanol per liter within about 50 h. The yield in terms of grams of ethanol produced per gram of carbohydrate utilized was 0.48 g/g, which corresponds to 93.3% of the theoretical yield. This result indicates that efficient simultaneous saccharification and fermentation of cellulose to ethanol are carried out by a recombinant yeast cells displaying cellulolytic enzymes.     

Immobilization of DNA by UV irradiation and its utilization as functional materials.

The water-insoluble DNA film was successfully prepared by UV irradiation. The DNA film was stable in water. It could effectively accumulated the DNA-binding intercalating materials, such as ethidium bromide, dibenzo-p-dioxin and benzo[a]pyrene, in their aqueous solutions. On the other hand, DNA was immobilized onto nonwoven cellulose fabrics, also by the UV irradiation. The DNA immobilized cloth was found to bind silver ions. The DNA-cloth containing silver ion showed antibacterial activity. The water-insoluble DNA prepared by UV irradiation has a potential ability to serve as biomaterials for medical, engineering and environmental objects.     

Grafting of softwood kraft pulps fibers with fatty acids under cold plasma conditions

Cold plasma treatment is used to modify the cellulosic fibers for a variety of applications. The grafting of softwood unbleached (UBP) and bleached (BP) kraft pulp fibers has been performed under the action of cold plasma discharges, using different kinds of fatty acids. The grafted samples are characterized by FTIR spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), termogravimetry (TG-DTG) and X-ray diffraction (XRD). All these methods confirm the morphological and structural changes after plasma treatment which determines the modification in cellulosic fiber properties. The active centers created within the cellulose chains by plasma treatment were used to initiate grafting reactions with fatty acids. Such modification is useful to enhance the fibers properties such as softness and to change hydrophilic/hydrophobic balance.     

Influence of particle size and pH on anaerobic degradation of cellulose by ruminal microbes

Batch experiments were performed to investigate the influence of cellulose particle size and pH on the anaerobic degradation of crystalline cellulose by ruminal microbes. At a particle size of 50 μm there was a higher hydrolysis and acidogenesis rate, and a reduced degradation time, than for 100-μm particles. Reduction in cellulose particle size resulted in decreased methane production, but an increase of soluble products. Cellulose degradation increased with pH from pH 6.0 to 7.5, whereas at pH⩽5.5 there was no degradation. The inhibitory effect of low pH (⩽5.5) on ruminal microbes was not completely remedied even when the pH of the medium was adjusted to a neutral range. In an anaerobic cellulosic waste degrading system inoculated with ruminal microbes the fermentation system should therefore be maintained above pH 6.0. In all cases, volatile fatty acids were the major water-soluble products of cellulose degradation; acetate and propionate accounted for more than 90% of the volatile fatty acid total.     

Modification of cellulosic fibers by UV-irradiation. Part II: After treatments effects

This work presents the comparative study on the dyeing behavior of cellulose fibers in alkaline solutions and under the influence of UV radiation. The cellulosic fabrics were pretreated followed by conventional mercerization technique or treatment with UV irradiation. For different time duration the reorganization of cellulose fibers by swelling treatments in alkaline solutions results in numerous structural modifications, causing changes of their accessibility and/or reactivity. The results revealed that the swelling of the cellulosic fibers depends on type of pre-treatment, dose of the radiation and the concentration of alkaline solution used. SEM analysis confirmed that UV irradiation of the cellulosic fibers leads to a higher swelling in comparison with any concentration of NaOH treatment. In comparison of both the treatments, the mercerized cellulosic fibers have shown better tear and tensile strength as compared to the untreated and UV irradiated one. There is adverse effect of UV radiation on the mechanical properties of UV radiation. Moreover, no loss in weight was observed after exposing the cellulose fabrics surface to UV radiation.     

Evaluation of swollenin from <Emphasis Type="Italic">Trichoderma pseudokoningii</Emphasis> as a potential synergistic factor in the enzymatic hydrolysis of cellulose with low cellulase loadings

Swollenin is a novel plant expansin-like protein that has been proposed to have a cellulose disruption activity. In this study, the recombinant swollenin (SWO2) from Trichoderma pseudokoningii S38 was successfully produced and purified in Aspergillus niger with a final yield of up to 10 mg of purified protein from 1 l of fermentation supernatant. The recombinant protein was found to exhibit very low level of endoglucanase activity and caused a slight increase in the crystallinity when treating cellulose. Simultaneous incubation of SWO2 with low-dose cellulases resulted in a significant synergistic activity in cellulose hydrolysis. Specifically, an even greater increase in the synergistic activity was obtained when cellulose was pretreated with swollenin followed by cellulase hydrolysis. Our results, therefore, provide a novel approach for the potential application of swollenin in the efficient saccharification of cellulosic materials.