Enthalpic and entropic contributions mediate the role of disulfide bonds on the conformational stability of interleukin-4

The role of disulfide bridges in the structure, stability, and folding pathways of proteins has been the subject of wide interest in the fields of protein design and engineering. However, the relative importance of entropic and enthalpic contributions for the stabilization of proteins provided by disulfides is not always clear. Here, we perform a detailed analysis of the role of disulfides in the conformational stability of human Interleukin-4 (IL4), a four-helix bundle protein. In order to evaluate the contribution of two out of the three disulfides to the structure and stability of IL4, two IL4 mutants, C3T-IL4 and C24T-IL4, were used. NMR and ANS binding experiments were compatible with altered dynamics and an increase of the nonpolar solvent-accessible surface area of the folded state of the mutant proteins. Chemical and thermal unfolding experiments followed by fluorescence and circular dichroism revealed that both mutant proteins have lower conformational stability than the wild-type protein. Transition temperatures of unfolding decreased 14 degrees C for C3T-IL4 and 10 degrees C for C24T-IL4, when compared to WT-IL4, and the conformational stability, at 25 degrees C, decreased 4.9 kcal/mol for C3T-IL4 and 3.2 kcal/mol for C24T-IL4. Interestingly, both the enthalpy and the entropy of unfolding, at the transition temperature, decreased in the mutant proteins. Moreover, a smaller change in heat capacity of unfolding was also observed for the mutants. Thus, disulfide bridges in IL4 play a critical role in maintaining the thermodynamic stability and core packing of the helix bundle.     

NMR structure of a variant human prion protein with two disulfide bridges

The nuclear magnetic resonance structure of the globular domain with residues 121-230 of a variant human prion protein with two disulfide bonds, hPrP(M166C/E221C), shows the same global fold as wild-type hPrP(121-230). It contains three alpha-helices of residues 144-154, 173-194 and 200-228, an anti-parallel beta-sheet of residues 128-131 and 161-164, and the disulfides Cys166-Cys221 and Cys179-Cys214. The engineered extra disulfide bond in the presumed "protein X"-binding site is accommodated with slight, strictly localized conformational changes. High compatibility of hPrP with insertion of a second disulfide bridge in the protein X epitope was further substantiated by model calculations with additional variant structures. The ease with which the hPrP structure can accommodate a variety of locations for a second disulfide bond within the presumed protein X-binding epitope suggests a functional role for the extensive perturbation by a natural second disulfide bond of the corresponding region in the human doppel protein.     

The disulfide bonding pattern in ficolin multimers

Ficolin is a plasma lectin, consisting of a short N-terminal multimerization domain, a middle collagen domain, and a C-terminal fibrinogen-like domain. The collagen domains assemble the subunits into trimers, and the N-terminal domain assembles four trimers into 12-mers. Two cysteine residues in the N-terminal domain are thought to mediate multimerization by disulfide bonding. We have generated three mutants of ficolin alpha in which the N-terminal cysteines were substituted by serines (Cys4, Cys24, and Cys4/Cys24). The N-terminal cysteine mutants were produced in a mammalian cell expression system, purified by affinity chromatography, and analyzed under nondenaturing conditions to resolve the multimer structure of the native protein and under denaturing conditions to resolve the disulfide-linked structure. Glycerol gradient sedimentation and electron microscopy in nondenaturing conditions showed that plasma and recombinant wild-type protein formed 12-mers. The Cys4 mutant also formed 12-mers, but Cys24 and Cys4/Cys24 mutants formed only trimers. This means that protein interfaces containing Cys4 are stable as noncovalent protein-protein interactions and do not require disulfides, whereas those containing Cys24-Cys24 require the disulfides for stability. Proteins were also analyzed by nonreducing SDS-PAGE to show the covalent structure under denaturing conditions. Wild-type ficolin was covalently linked into 12-mers, whereas elimination of either Cys4 or Cys24 gave dimers and monomers. We present a model in which symmetric Cys24-Cys24 disulfide bonds between trimers are the basis for multimerization. The model may also be relevant to collectin multimers.     

Crystal structures of subtilisin BPN' variants containing disulfide bonds and cavities: concerted structural rearrangements induced by mutagenesis

The X-ray structures of four genetically engineered disulfide variants of subtilisin have been analyzed to determine the energetic and structural constraints involved in inserting disulfide bonds into proteins. Each of the engineered disulfides exhibited atypical sets of dihedral angles compared with known structures of natural disulfide bridges in proteins and affected its local structural environment to a different extent. The disulfides located in buried regions, Cys26-Cys232 and Cys29-Cys119, induced larger changes than did Cys24-Cys87 and Cys22-Cys87, which are located on the surface of the molecule. An analysis of the concerted changes in secondary structure units such as alpha-helices and beta-sheets indicated systematic long-range effects. The observed changes in the mutants were largely distributed asymmetrically around the inserted disulfides, reflecting different degrees of inherent flexibility of neighboring secondary structure types. The disulfide substitution in each variant molecule created some invaginations or cavities, causing a reorganization of the surrounding water structure. These changes are described, as well as the changes in side chain positions of groups that border the cavities.     

Assignment of the disulfide bonds in the sweet protein brazzein

The thermostable sweet protein brazzein consists of 54 amino acid residues and has four intramolecular disulfide bonds, the location of which is unknown. We found that brazzein resists enzymatic hydrolysis at enzyme/substrate ratios (w/w) of 1:100-1:10 at 35–40°C for 24–48 h. Brazzein was hydrolyzed using thermolysin at an enzyme/substrate ratio of 1:1 (w/w) in water, pH 5.5. for 6 h and at 50°C. The disulfide bonds were determined, by a combination of mass spectrometric analysis and amino acid sequencing of cystine-containing peptides, to be between Cys4-Cys52, Cys16-Cys37, Cys22-Cys47, and Cys26-Cys49. These disulfide bonds contribute to its thermostability. © 1996 John Wiley & Sons, Inc.     

Interleukin-2 signalling is modulated by a labile disulfide bond in the CD132 chain of its receptor

Certain disulfide bonds present in leucocyte membrane proteins are labile and can be reduced in inflammation. This can cause structural changes that result in downstream functional effects, for example, in integrin activation. Recent studies have shown that a wide range of membrane proteins have labile disulfide bonds including CD132, the common gamma chain of the receptors for several cytokines including interleukin-2 and interleukin-4 (IL-2 and IL-4). The Cys(183)-Cys(232) disulfide bond in mouse CD132 is susceptible to reduction by enzymes such as thioredoxin (TRX), gamma interferon-inducible lysosomal thiolreductase and protein disulfide isomerase, which are commonly secreted during immune activation. The Cys(183)-Cys(232) disulfide bond is also reduced in an in vivo lipopolysaccharide (LPS)-induced acute model of inflammation. Conditions that lead to the reduction of the Cys(183)-Cys(232) disulfide bond in CD132 inhibit proliferation of an IL-2-dependent T cell clone and concomitant inhibition of the STAT-5 signalling pathway. The same reducing conditions had no effect on the proliferation of an IL-2-independent T cell clone, nor did they reduce disulfide bonds in IL-2 itself. We postulate that reduction of the Cys(183)-Cys(232) disulfide in CD132 inhibits IL-2 binding to the receptor complex. Published data show that the Cys(183)-Cys(232) disulfide bond is exposed at the surface of CD132 and in close contact with IL-2 and IL-4 in their respective receptor complexes. In addition, mutants in these Cys residues in human CD132 lead to immunodeficiency and loss of IL-2 binding. These results have wider implications for the regulation of cytokine receptors in general, as their activity can be modulated by a 'redox regulator' mechanism caused by the changes in the redox environment that occur during inflammation and activation of the immune system.     

Assignment of the disulfide bonds of huwentoxin-II by Edman degradation sequencing and stepwise thiol modification.

A novel strategy combining Edman degradation and thiol modification was developed to assign the three disulfides of huwentoxin-II (HWTX-II), an insecticidal peptide purified from the venom of the spider Selenocosmia huwena. Phenylthiohydantoin (Pth) derivatives of Cys and the elimination product, dehydroalanine (DeltaSer), can be observed in the Cys cycles during Edman degradation of native HWTX-II. The appearance of two products indicates that the disulfides of HWTX-II were split and that the free thiol group of the second half cystine has been generated. Information about the nature of the disulfide bridges of HWTX-II could be obtained from the sequencing signal if the nascent thiols were modified stepwise by 4-vinylpyridine. Using this method the disulfide bridges of HWTX-II were assigned as Cys4-Cys18, Cys8-Cys29 and Cys23-Cys34, which is different from that seen in HWTX-I, a neurotoxic peptide from the same spider. Using this strategy, one can assign the disulfide bonds of small proteins by sequencing and modification n - 1 times, where n is the number of disulfide bonds in the protein. The above assignment of the disulfide bonds of HWTX-II was confirmed by MALDI-TOF MS of tryptic fragments of HWTX-II. Some disulfide interchanging during proteolysis was observed by monitoring the kinetics of proteolysis of HWTX-II by MALDI-TOF MS.     

Disulfide bond structure and N-glycosylation sites of the extracellular domain of the human interleukin-6 receptor

The high affinity interleukin-6 (IL-6) receptor is a hexameric complex consisting of two molecules each of IL-6, IL-6 receptor (IL-6R), and the high affinity converter and signaling molecule, gp130. The extracellular "soluble" part of the IL-6R (sIL-6R) consists of three domains: an amino-terminal Ig-like domain and two fibronectin-type III (FN III) domains. The two FN III domains comprise the cytokine-binding domain defined by a set of 4 conserved cysteine residues and a WSXWS sequence motif. Here, we have determined the disulfide structure of the human sIL-6R by peptide mapping in the absence and presence of reducing agent. Mass spectrometric analysis of these peptides revealed four disulfide bonds and two free cysteines. The disulfides Cys102-Cys113 and Cys146-Cys157 are consistent with known cytokine-binding domain motifs, and Cys28-Cys77 with known Ig superfamily domains. An unusual cysteine connectivity between Cys6-Cys174, which links the Ig-like and NH2-terminal FN III domains causing them to fold back onto each other, has not previously been observed among cytokine receptors. The two free cysteines (Cys192 and Cys258) were detected as cysteinyl-cysteines, although a small proportion of Cys258 was reactive with the alkylating agent 4-vinylpyridine. Of the four potential N-glycosylation sites, carbohydrate moieties were identified on Asn36, Asn74, and Asn202, but not on Asn226.     

Glycerol-enhanced detection of a preferential structure latent in unstructured 1SS-variants of lysozyme

Four species of 1SS-varinats of lysozyme were almost unstructured in water, judged from their near-UV CD and (1) H-(15) N-HSQC spectra. Some preferential structure might exist in such a disordered state, but the population of molecules in such a conformation must have been too small to be detected by spectroscopic methods. Indeed, our previous study showed that the addition of 30% glycerol induced the unstructured 2SS-variant of lysozyme to form a native-like structure. To extend this method to more disordered proteins, we attempted to detect some preferential structure latent in unstructured 1SS-variants by the glycerol-enhanced detection. Only in one molecular species of the four 1SS-variants, 1SS[6-127] containing a single disulfide bridge of Cys6-Cys127, a preferential structure was found in the presence of 50% glycerol. It was detected by near-UV CD measurements and the H/D exchange method combined with the NMR spectroscopy. The glycerol-induced structure in 1SS[6-127] was not localized only in the vicinity of Cys6-Cys127, and largely protected regions distributed themselves among A-, B-, and C-helices and Ile55 and Leu56. It was similar to the glycerol-induced structure in 2SS[6-127, 64-80] containing two disulfide bridges of Cys6-Cys127 and Cys64-Cys80, although the former was less rigid than the latter. The role of A-helix (residues 4-15) is proposed as an origin of excellent potential of Cys6-Cys127 for inducing a tertiary structure in the α-domain.     

Two conserved cysteine triads in human Ero1alpha cooperate for efficient disulfide bond formation in the endoplasmic reticulum

Human Ero1alpha is an endoplasmic reticulum (ER)-resident protein responsible for protein disulfide isomerase (PDI) oxidation. To clarify the molecular mechanisms underlying its function, we generated a panel of cysteine replacement mutants and analyzed their capability of: 1) complementing a temperature-sensitive yeast Ero1 mutant, 2) favoring oxidative folding in mammalian cells, 3) forming mixed disulfides with PDI and ERp44, and 4) adopting characteristic redox-dependent conformations. Our results reveal that two essential cysteine triads (Cys85-Cys94-Cys99 and Cys391-Cys394-Cys397) cooperate in electron transfer, with Cys94 likely forming mixed disulfides with PDI. Dominant negative phenotypes arise when critical residues within the triads are mutated (Cys394, Cys397, and to a lesser extent Cys99). Replacing the first cysteine in either triad (Cys85 or Cys391) generates mutants with weaker activity. In addition, mutating either Cys85 or Cys391, but not Cys397, reverts the dominant negative phenotype of the C394A mutant. These findings suggest that interactions between the two triads, dependent on Cys85 and Cys391, are important for Ero1alpha function, possibly stabilizing a platform for efficient PDI oxidation.     

Evidence for difference in the roles of two cysteine residues involved in disulfide bond formation in the folding of human lysozyme

Human lysozyme is made up of 130 amino acid residues and has four disulfide bonds at Cys6-Cys128, Cys30-Cys116, Cys65-Cys81, and Cys77-Cys95. Our previous results using the Saccharomyces cerevisiae secretion system indicate that the individual disulfide bonds of human lysozyme have different functions in the correct in vivo folding and enzymatic activity of the protein (Taniyama, Y., Yamamoto, Y., Nakao, M., Kikuchi, M., and Ikehara, M. (1988) Biochem. Biophys. Res. Commun. 152, 962-967). In this paper, we report the results of experiments that were focused on the roles of Cys65 and Cys81 in the folding of human lysozyme protein in yeast. A mutant protein (C81A), in which Cys81 was replaced with Ala, had almost the same enzymatic activity and conformation as those of the native enzyme. On the other hand, another mutant (C65A), in which Cys65 was replaced with Ala, was not found to fold correctly. These results indicate that Cys81 is not a requisite for both correct folding and activity, whereas Cys65 is indispensable. The mutant protein C81A is seen to contain a new, non-native disulfide bond at Cys65-Cys77. The possible occurrence of disulfide bond interchange during our mapping experiments cannot be ruled out by the experimental techniques presently available, but characterization of other mutant proteins and computer analysis suggest that the intramolecular exchange of disulfide bonds is present in the folding pathway of human lysozyme in vivo.     

Energetics of structural domains in alpha-lactalbumin.

alpha-Lactalbumin is a small, globular protein that is stabilized by four disulfide bonds and contains two structural domains. One of these domains is rich in alpha-helix (the alpha-domain) and has Cys 6-Cys 120 and Cys 28-Cys 111 disulfide bonds. The other domain is rich in beta-sheet (the beta-domain), has Cys 61-Cys 77 and Cys 73-Cys 91 disulfide bonds, and includes one calcium binding site. To investigate the interaction between domains, we studied derivatives of bovine alpha-lactalbumin differing in the number of disulfide bonds, using calorimetry and CD at different temperatures and solvent conditions. The three-disulfide form, having a reduced Cys 6-Cys 120 disulfide bond with carboxymethylated cysteines, is similar to intact alpha-lactalbumin in secondary and tertiary structure as judged by its ellipticity in the near and far UV. the two-disulfide form of alpha-lactalbumin, having reduced Cys 6-Cys 120 and Cys 28-Cys 111 disulfide bonds with carboxymethylated cysteines, retains about half the secondary and tertiary structure of the intact alpha-lactalbumin. The remaining structure is able to bind calcium and unfolds cooperatively upon heating, although at lower temperature and with significantly lower enthalpy and entropy. We conclude that, in the two disulfide form, alpha-lactalbumin retains its calcium-binding beta-domain, whereas the alpha-domain is unfolded. It appears that the beta-domain does not require alpha-domain to fold, but its structure is stabilized significantly by the presence of the adjacent folded alpha-domain.     

NMR solution structure of butantoxin

The NMR structure of a new toxin, butantoxin (BuTX), which is present in the venoms of the three Brazilian scorpions Tityus serrulatus, Tityus bahiensis, and Tityus stigmurus, has been investigated. This toxin was shown to reversibly block the Shaker B potassium channels (K(d) approximately 660 nM) and inhibit the proliferation of T-cells and the interleukin-2 production of antigen-stimulated T-helper cells. BuTX is a 40 amino acid basic protein stabilized by the four disulfide bridges: Cys2-Cys5, Cys10-Cys31, Cys16-Cys36, and Cys20-Cys38. The latter three are conserved among all members of the short-chain scorpion toxin family, while the first is unique to BuTX. The three-dimensional structure of BuTX was determined using (1)H-NMR spectroscopy. NOESY, phase sensitive COSY (PH-COSY), and amide hydrogen exchange data were used to generate constraints for molecular modeling calculations. Distance geometry and simulated annealing calculations were performed to generate a family of 49 structures free of constraint violations. The secondary structure of BuTX consists of a short 2(1/2) turn alpha-helix (Glu15-Phe23) and a beta-sheet. The beta-sheet is composed of two well-defined antiparallel strands (Gly29-Met32 and Lys35-Cys38) connected by a type-I' beta-turn (Asn33-Asn34). Residues Cys5-Ala9 form a quasi-third strand of the beta-sheet. The N-terminal C2-C5 disulfide bridge unique to this toxin does not appear to confer stability to the protein.     

Functional structure of the somatomedin B domain of vitronectin

The N-terminal somatomedin B domain (SMB) of vitronectin binds PAI-1 and the urokinase receptor with high affinity and regulates tumor cell adhesion and migration. We have shown previously in the crystal structure of the PAI-1/SMB complex that SMB, a peptide of 51 residues, is folded as a compact cysteine knot of four pairs of crossed disulfide bonds. However, the physiological significance of this structure was questioned by other groups, who disputed the disulfide bonding shown in the crystal structure (Cys5-Cys21, Cys9-Cys39, Cys19-Cys32, Cys25-Cys31), notably claiming that the first disulfide is Cys5-Cys9 rather than the Cys5-Cys21 bonding shown in the structure. To test if the claimed Cys5-Cys9 bond does exist in the SMB domain of plasma vitronectin, we purified mouse and rat plasma vitronectin that have a Met (hence cleavable by cyanogen bromide) at residue 14, and also prepared recombinant human SMB variants from insect cells with residues Asn14 or Leu24 mutated to Met. HPLC and mass spectrometry analysis showed that, after cyanogen bromide digestion, all the fragments of the SMB derived from mouse or rat vitronectin or the recombinant SMB mutants are still linked together by disulfides, and the N-terminal peptide (residue 1-14 or 1-24) can only be released when the disulfide bonds are broken. This clearly demonstrates that Cys5 and Cys9 of SMB do not form a disulfide bond in vivo, and together with other structural evidence confirms that the only functional structure of the SMB domain of plasma vitronectin is that seen in its crystallographic complex with PAI-1.     

Solution synthesis of charybdotoxin (ChTX), a K+ channel blocker.

Charybdotoxin, a 37 amino acid peptide which is a minor component of Leiurus quinquestriatus venom, was synthesized by the solution procedure applying our maximum protection strategy. After formation of the three disulfide bonds, for which a redox buffer was necessary, the final product was purified to homogeneity and found to have similar biological potency to that reported by others for the natural product. The disulfide bond configuration was found to be: Cys7-Cys28; Cys13-Cys33; Cys17-Cys35. Conformational analysis by 1H-NMR showed that the molecule exists as a very tightly folded structure, in which residues 1-7 and 24-37 form a triple-stranded beta-sheet, with a turn at positions 30-31. The region from 11-20 appears to adopt an alpha-helical conformation.     

Structures of scrambled disulfide forms of the potato carboxypeptidase inhibitor predicted by molecular dynamics simulations with constraints

The structures of two species of potato carboxypeptidase inhibitor with nonnative disulfide bonds were determined by molecular dynamics simulations in explicit solvent using disulfide bond constraints that have been shown to work for the native species. Ten structures were determined; five for scrambled A (disulfide bonds between Cys8-Cys27, Cys12-Cys18, and Cys24-Cys34) and five for the scrambled C (disulfide bonds Cys8-Cys24, Cys12-Cys18, and Cys27-Cys34). The two scrambled species were both more solvent exposed than the native structure; the scrambled C species was more solvent exposed and less compact than the scrambled A species. Analysis of the loop regions indicates that certain loops in scrambled C are more nativelike than in scrambled A. These factors, combined with the fact that scrambled C has one native disulfide bond, may contribute to the observed faster conversion to the native structure from scrambled C than from scrambled A. Results from the PROCHECK program using the standard parameter database and a database specially constructed for small, disulfide-rich proteins indicate that the 10 scrambled structures have correct stereochemistry. Further, the results show that a characteristic feature of small, disulfide-rich proteins is that they score poorly using the standard PROCHECK parameter database. Proteins 2000;40:482-493.     

Pathway of oxidative folding of alpha-lactalbumin: a model for illustrating the diversity of disulfide folding pathways

The pathway of oxidative folding of alpha-lactalbumin (alpha LA) (four disulfide bonds) has been characterized by structural and kinetic analysis of the acid-trapped folding intermediates. In the absence of calcium, oxidative folding of alpha LA proceeds through highly heterogeneous species of one-, two-, three-, and four-disulfide (scrambled) intermediates to reach the native structure. In the presence of calcium, the folding intermediates of alpha LA comprise two predominant isomers (alpha LA-IIA and alpha LA-IIIA) adopting exclusively native disulfide bonds, including the two disulfide bonds (Cys(61)-Cys(77) and Cys(73)-Cys(91)) located within the beta-sheet calcium binding domain. alpha LA-IIA is a two-disulfide species consisting of Cys(61)-Cys(77) and Cys(73)-Cys(91) disulfide bonds. alpha LA-IIIA contains Cys(61)-Cys(77), Cys(73)-Cys(91), and Cys(28)-Cys(111) disulfide bonds. The underlying mechanism of the contrasting folding pathways of calcium-bound and calcium-depleted alpha LA is congruent with the cause of diversity of disulfide folding pathways observed among many well-characterized three-disulfide proteins, including bovine pancreatic trypsin inhibitor and hirudin. Our study also reveals novel aspects of the folding mechanism of alpha LA that have not been described previously.     

Disulfide isomerization and thiol-disulfide exchange of long neurotoxins from the venom of Ophiophagus hannah

Selective reduction on the Cys28-Cys32 disulfide of Ophiophagus hannah neurotoxins, Oh-4 and Oh-5, revealed that isomerization of this disulfide linkage caused the two toxins to have distinct conformation and different retention time on a reversed-phase column. The Cys28-Cys32 disulfide of Oh-4 and Oh-5 was prone to form mixed disulfides with glutathione following pseudo-first-order kinetics. In addition to glutathionylated proteins, Oh-4 could be promoted to convert into Oh-5 by thiol compounds. Isomerization of Oh-5 into Oh-4 was not observed in the presence of thiol compounds. Dethiolation of glutathionylated proteins produced Oh-4 and Oh-5. Oxidation of the partially reduced toxin with reduced Cys28 and Cys32 was exclusively converted into Oh-5 regardless of the absence or presence of GSH/GSSG. Acrylamide quenching studies revealed difference in degree of exposure of the single Trp27 between Oh-4 and Oh-5. Synthesized peptides with substitution of Trp27 or Phe31 with Gly abolished entirely the formation of disulfide-linked dimeric product noted with the peptide of wild-type sequence. These results suggest that disulfide formation and isomerization of Cys28-Cys32 could be regulated by thiolation, and that the bulky aromatic residues Trp27 and Phe31 facilitate favorably the occurrence of disulfide isomerization of Cys28-Cys32.     

Crystal structure of the outer membrane protein RcsF, a new substrate for the periplasmic protein-disulfide isomerase DsbC

The bacterial Rcs phosphorelay is a stress-induced defense mechanism that controls the expression of numerous genes, including those for capsular polysaccharides, motility, and virulence factors. It is a complex multicomponent system that includes the histidine kinase (RcsC) and the response regulator (RcsB) and also auxiliary proteins such as RcsF. RcsF is an outer membrane lipoprotein that transmits signals from the cell surface to RcsC. The physiological signals that activate RcsF and how RcsF interacts with RcsC remain unknown. Here, we report the three-dimensional structure of RcsF. The fold of the protein is characterized by the presence of a central 4-stranded β sheet, which is conserved in several other proteins, including the copper-binding domain of the amyloid precursor protein. RcsF, which contains four conserved cysteine residues, presents two nonconsecutive disulfides between Cys(74) and Cys(118) and between Cys(109) and Cys(124), respectively. These two disulfides are not functionally equivalent; the Cys(109)-Cys(124) disulfide is particularly important for the assembly of an active RcsF. Moreover, we show that formation of the nonconsecutive disulfides of RcsF depends on the periplasmic disulfide isomerase DsbC. We trapped RcsF in a mixed disulfide complex with DsbC, and we show that deletion of dsbC prevents the activation of the Rcs phosphorelay by signals that function through RcsF. The three-dimensional structure of RcsF provides the structural basis to understand how this protein triggers the Rcs signaling cascade.     

Two-State Folding of Lysozyme Versus Multiple-State Folding of α-Lactalbumin Illustrated by the Technique of Disulfide Scrambling

The folding of lysozyme and of alpha-lactalbumin exhibits vastly different kinetics and pathways. Existing evidence indicates that folding intermediates of alphaLA form a well-populated equilibrium molten globule state that is absent in the case of hen lysozyme. We demonstrate here such divergent folding mechanisms of lysozyme and alphaLA using the technique of disulfide scrambling. Two extensively unfolded homologous isomers (beads-form) of lysozyme (Cys6-Cys30, Cys64-Cys76, Cys80-Cys94, Cys115-Cys127) and alphaLA (Cys6-Cys28, Cys61-Cys73, Cys77-Cys91, Cys111-Cys120) were allowed to refold in parallel to form the native protein. Folding kinetics was measured by the recovery of the native structure. Folding intermediates, which illustrate the folding pathway, were trapped by quenching disulfide shuffling and were analyzed by reversed-phase high-pressure liquid chromatography. The results revealed that under identical folding conditions, the folding rate of lysozyme is about 30-fold faster than that of alphaLA. Folding intermediates of lysozyme are far less heterogeneous and sparsely populated than those of alphaLA. Numerous predominant on-pathway and off-pathway intermediates observed along the folding pathway of alphaLA are conspicuously absent in the case of lysozyme. The difference is most striking under fast folding conditions performed in the presence of protein disulfide isomerase. Under these conditions, folding of lysozyme undergoes a near two-state mechanism without accumulation of stable folding intermediates.