In vitro cleavage of the simian virus 40 early polyadenylation site adjacent to a required downstream TG sequence.

Exogenous RNA containing the simian virus 40 early polyadenylation site was efficiently and accurately polyadenylated in in vitro nuclear extracts. Correct cleavage required ATP. In the absence of ATP, nonpoly(A)+ products accumulated which were 18 to 20 nucleotides longer than the RNA generated by correct cleavage; the longer RNA terminated adjacent to the downstream TG element required for polyadenylation. In the presence of ATP analogs, alternate cleavage was not observed; instead, correct cleavage without poly(A) addition occurred. ATP-independent cleavage of simian virus 40 early RNA had many of the same properties as correct cleavage including requirements for an intact AAUAAA element, a proximal 3' terminus, and extract small nuclear ribonucleoproteins. This similarity in reaction parameters suggested that ATP-independent cleavage is an activity of the normal polyadenylation machinery. The ATP-independent cleavage product, however, did not behave as an intermediate in polyadenylation. The alternate RNA did not preferentially chase into correctly cleaved material upon readdition of ATP; instead, poly(A) was added to the 3' terminus of the cleaved RNA during a chase. Purified ATP-independent cleavage RNA, however, was a substrate for correct cleavage when reintroduced into the nuclear extract. Thus, alternate cleavage of polyadenylation sites adjacent to a required downstream sequence element is directed by the polyadenylation machinery in the absence of ATP.     

Requirements for accurate and efficient mRNA 3'' end cleavage and polyadenylation of a simian virus 40 early pre-RNA in vitro.

Using a pre-RNA containing the simian virus 40 early introns and poly(A) addition site, we investigated several possible requirements for accurate and efficient mRNA 3' end cleavage and polyadenylation in a HeLa cell nuclear extract. Splicing and 3' end formation occurred under the same conditions but did not appear to be coupled in any way in vitro. Like splicing, 3' end cleavage and polyadenylation each required Mg2+, although spermidine could substitute in the cleavage reaction. Additionally, cleavage of this pre-RNA, but not others, was totally blocked by EDTA, indicating that structural features of pre-RNA may affect the ionic requirements of 3' end formation. The ATP analog 3' dATP inhibited both cleavage and polyadenylation even in the presence of ATP, possibly reflecting the coupled nature of these activities. A 5' cap structure appears not to be required for mRNA 3' end processing in vitro because neither the presence or absence of a 5' cap on the pre-RNA nor the addition of cap analogs to reaction mixtures had any effect on the efficiency of 3' end processing. Micrococcal nuclease pretreatment of the nuclear extract inhibited cleavage and polyadenylation. However, restoration of activity was achieved by addition of purified Escherichia coli RNA, suggesting that the inhibition caused by such a nuclease treatment was due to a general requirement for mass of RNA rather than to destruction of a particular nucleic acid-containing component such as a small nuclear ribonucleoprotein.     

Polyadenylation of mRNA: minimal substrates and a requirement for the 2'' hydroxyl of the U in AAUAAA.

mRNA-specific polyadenylation can be assayed in vitro by using synthetic RNAs that end at or near the natural cleavage site. This reaction requires the highly conserved sequence AAUAAA. At least two distinct nuclear components, an AAUAAA specificity factor and poly(A) polymerase, are required to catalyze the reaction. In this study, we identified structural features of the RNA substrate that are critical for mRNA-specific polyadenylation. We found that a substrate that contained only 11 nucleotides, of which the first six were AAUAAA, underwent AAUAAA-specific polyadenylation. This is the shortest substrate we have used that supports polyadenylation: removal of a single nucleotide from either end of this RNA abolished the reaction. Although AAUAAA appeared to be the only strict sequence requirement for polyadenylation, the number of nucleotides between AAUAAA and the 3' end was critical. Substrates with seven or fewer nucleotides beyond AAUAAA received poly(A) with decreased efficiency yet still bound efficiently to specificity factor. We infer that on these shortened substrates, poly(A) polymerase cannot simultaneously contact the specificity factor bound to AAUAAA and the 3' end of the RNA. By incorporating 2'-deoxyuridine into the U of AAUAAA, we demonstrated that the 2' hydroxyl of the U in AAUAAA was required for the binding of specificity factor to the substrate and hence for poly(A) addition. This finding may indicate that at least one of the factors involved in the interaction with AAUAAA is a protein.     

RNA processing in vitro produces mature 3'' ends of a variety of Saccharomyces cerevisiae mRNAs.

Ammonium sulfate fractionation of a Saccharomyces cerevisiae whole-cell extract yielded a preparation which carried out correct and efficient endonucleolytic cleavage and polyadenylation of yeast precursor mRNA substrates corresponding to a variety of yeast genes. These included CYC1 (iso-1-cytochrome c), HIS4 (histidine biosynthesis), GAL7 (galactose-1-phosphate uridyltransferase), H2B2 (histone H2B2), PRT2 (a protein of unknown function), and CBP1 (cytochrome b mRNA processing). The reaction processed these pre-mRNAs with varying efficiencies, with cleavage and polyadenylation exceeding 70% in some cases. In each case, the poly(A) tail corresponded to the addition of approximately 60 adenosine residues, which agrees with the usual length of poly(A) tails formed in vivo. Addition of cordycepin triphosphate or substitution of CTP for ATP in these reactions inhibited polyadenylation but not endonucleolytic cleavage and resulted in accumulation of the cleaved RNA product. Although this system readily generated yeast mRNA 3' ends, no processing occurred on a human alpha-globin pre-mRNA containing the highly conserved AAUAAA polyadenylation signal of higher eucaryotes. This sequence and adjacent signals used in mammalian systems are thus not sufficient to direct mRNA 3' end formation in yeast. Despite the lack of a highly conserved nucleotide sequence signal, the same purified fraction processed the 3' ends of a variety of unrelated yeast pre-mRNAs, suggesting that endonuclease cleavage and polyadenylation may produce the mature 3' ends of all mRNAs in S. cerevisiae.     

Isolation and characterization of polyadenylation complexes assembled in vitro

We developed a two-step purification of mammalian polyadenylation complexes assembled in vitro. Biotinylated pre-mRNAs containing viral or immunoglobulin poly(A) sites were incubated with nuclear extracts prepared from mouse myeloma cells under conditions permissive for in vitro cleavage and polyadenylation and the mixture was fractionated by gel filtration; complexes containing biotinylated pre-mRNA and bound proteins were affinity purified on avidin-agarose resin. Western analysis of known components of the polyadenylation complex demonstrated copurification of polyadenylation factors with poly(A) site-containing RNA but not with control RNA substrates containing either no polyadenylation signals or a point mutation of the AAUAAA polyadenylation signal. Polyadenylation complexes that were assembled on exogenous RNA eluted from the Sephacryl column in fractions consistent with their size range extending from 2 to 4 x 10(6) Mr. Complexes endogenous to the extract were of approximately the same apparent size, but more heterogeneous in distribution. This method can be used to study polyadenylation/cleavage complexes that may form upon a number of different RNA sequences, an important step towards defining which factors might differentially associate with specific RNAs.     

Analysis of RNA cleavage at the adenovirus-2 L3 polyadenylation site.

Processing at the L3 polyadenylation site of human adenovirus-2 involves endonucleolytic cleavage generating the 3' terminal sequence -UAOH to which adenosine residues are added. This dinucleotide is 19 nucleotides downstream of the AAUAAA polyadenylation signal. The ATP analog cordycepin triphosphate (3' dATP) inhibits poly(A) synthesis, but precursor RNA is processed to give a product terminating in -UAAH. Addition of only one adenosine analog demonstrates that the initial poly(A) tract is synthesized by polymerization of single residues rather than by ligation of preformed poly(A). Cleavage is not coupled to polyadenylation since incubation with an ATP analog containing a non-hydrolyzable alpha--beta bond generates a product with a 3' terminus coincident with the -UAOH) addition site. Addition of this accurately processed RNA to a nuclear extract results in efficient polyadenylation, suggesting that downstream sequences are not required for synthesis of the poly(A) tract. Finally, processing at the L3 poly(A) site may involve both endonucleolytic and exonucleolytic activities.     

The AAUAAA sequence is required both for cleavage and for polyadenylation of simian virus 40 pre-mRNA in vitro.

The sequence AAUAAA is found near the polyadenylation site of eucaryotic mRNAs. This sequence is required for accurate and efficient cleavage and polyadenylation of pre-mRNAs in vivo. In this study we show that synthetic simian virus 40 late pre-mRNAs are cleaved and polyadenylated in vitro in a HeLa cell nuclear extract, and that cleavage in vitro is abolished by each of four different single-base changes in AAUAAA. In this same extract, precleaved RNAs (RNAs with 3' termini at the polyadenylation site) are efficiently polyadenylated. This in vitro polyadenylation reaction also requires the AAUAAA sequence.     

Separation and characterization of a poly(A) polymerase and a cleavage/specificity factor required for pre-mRNA polyadenylation

To study the mechanism and factors required to form the 3' ends of polyadenylated mRNAs, we have fractionated HeLa cell nuclear extracts carrying out the normally coupled cleavage and polyadenylation reactions. Each reaction is catalyzed by a distinct, separable activity. The partially purified cleavage enzyme (at least 360,000 MW) retained the specificity displayed in nuclear extracts, since substitutions in the AAUAAA signal sequence inhibited cleavage. In contrast, the fractionated poly(A) polymerase (300,000 MW) lost all specificity. When fractions containing the cleavage and polyadenylation activities were mixed, the efficiency and specificity of the polyadenylation reaction were restored. Interestingly, the cleavage activity by itself functioned well on only one of four precursor RNAs tested. However, when mixed with the poly(A) polymerase-containing fraction, the cleavage activity processed the four precursors with comparable efficiencies.     

Polyadenylation-specific complexes undergo a transition early in the polymerization of a poly(A) tail.

We have analyzed several properties of the complex that forms between RNAs that end at the poly(A) site of simian virus 40 late mRNA and factors present in a HeLa cell nuclear extract. Formation of this polyadenylation-specific complex requires the sequence AAUAAA and a proximal 3' end. We have observed three changes in the polyadenylation complex early in the addition of the poly(A) tail. First, the complex becomes heparin sensitive after the addition of approximately 10 adenosines. Second, a 68-kilodalton protein present in the complex, which can be cross-linked by UV light to the RNA before polyadenylation has begun, no longer can be cross-linked after approximately 10 adenosines have been added. Third, after 30 adenosines have been added, the AAUAAA sequence becomes accessible to a complementary oligonucleotide and RNase H. This accessibility gradually increases with longer poly(A) tail lengths until, with the addition of 60 A's, all substrates are accessible at AAUAAA. Sheets and Wickens (Genes Dev. 3:1401-1412, 1989) have recently demonstrated two phases in the addition of a poly(A) tail: the first requires AAUAAA, whereas the second is independent of AAUAAA but requires a short oligo(A) primer. The data reported here further support a biphasic model for poly(A) addition and may indicate disengagement of specific factors from AAUAAA after the initiation phase.     

Sedimentation analysis of polyadenylation-specific complexes.

Precursor RNA containing the adenovirus L3 polyadenylation site is assembled into a 50S complex upon incubation with HeLa nuclear extract at 30 degrees C. The cofactor and sequence requirements for 50S complex formation are similar to those of the in vitro polyadenylation reaction. Assembly of this complex requires ATP but is not dependent upon synthesis of a poly(A) tract. In addition, a 50S complex does not form on substrate RNA in which the AAUAAA hexanucleotide upstream of the poly(A) site has been mutated to AAGAAA or on RNA in which sequences between +5 and +48 nucleotides downstream of the site have been removed. These mutations also prevent in vitro processing of substrate RNA. Kinetic studies suggest that the 50S complex is an intermediate in the polyadenylation reaction. It forms at an early stage in the reaction and at later times contains both poly(A)+ RNA as well as unreacted precursor. U-type small nuclear ribonucleoprotein particles are components of the 50S complex, as shown by immunoprecipitation with antiserum specific to the trimethyl cap of these small nuclear RNAs.     

Point mutations in AAUAAA and the poly (A) addition site: effects on the accuracy and efficiency of cleavage and polyadenylation in vitro.

Three sequences in the vicinity of poly (A) addition sites are conserved among vertebrate mRNAs. We analyze the effects of single base changes in each position of AAUAAA and in the nucleotide to which poly (A) is added on 3' end formation in vitro. All 18 possible single base changes of the AAUAAA sequence greatly reduce addition of poly (A) to RNAs that end at the poly (A) addition site, and prevent cleavage of RNAs that extend beyond. The magnitude of reduction varies greatly with the position changed and the base introduced. For any given mutation, cleavage and polyadenylation are reduced to similar extents, strongly suggesting that the same factor interacts with AAUAAA in both reactions. Mutations at and near the conserved adenosine to which poly (A) is added disturb the accuracy, but not the efficiency, of 3' end formation. For example, point mutations at the conserved adenosine shift the 3' end of the most abundant 5' half-molecule downstream by a single nucleotide. The mechanism by which these mutations might exert their effects on the precision of 3' end formation are discussed.     

Specific pre-cleavage and post-cleavage complexes involved in the formation of SV40 late mRNA 3'' termini in vitro.

Complexes form between processing factors present in a crude nuclear extract from HeLa cells and a simian virus 40 (SV40) late pre-mRNA which spans the polyadenylation [poly(A)] site. A specific 'pre-cleavage complex' forms on the pre-mRNA before cleavage. Formation of this complex requires the highly conserved sequence AAUAAA: it is prevented by mutations in AAUAAA, and by annealing DNA oligonucleotides to that sequence. After cleavage, the 5' half-molecule is found in a distinct 'post-cleavage complex'. In contrast, the 3' half-molecule is released. After cleavage and polyadenylation, polyadenylated RNA also is released. De novo formation of the post-cleavage complex requires AAUAAA and a nearby 3' terminus. Competition experiments suggest that a component which recognizes AAUAAA is required for formation of both pre- and post-cleavage complexes.     

Assembly of a polyadenylation-specific 25S ribonucleoprotein complex in vitro.

Extracts from HeLa cell nuclei assemble RNAs containing the adenovirus type 2 L3 polyadenylation site into a number of rapidly sedimenting heterodisperse complexes. Briefly treating reaction mixtures prior to sedimentation with heparin reveals a core 25S assembly formed with substrate RNA but not an inactive RNA containing a U----C mutation in the AAUAAA hexanucleotide sequence. The requirements for assembly of this heparin-stable core complex parallel those for cleavage and polyadenylation in vitro, including a functional hexanucleotide, ATP, and a uridylate-rich tract downstream of the cleavage site. The AAUAAA and a downstream U-rich element are resistant in the assembly to attack by RNase H. The poly(A) site between the two protected elements is accessible, but is attacked more slowly than in naked RNA, suggesting that a specific factor or secondary structure is located nearby. The presence of a factor bound to the AAUAAA in the complex is independently demonstrated by immunoprecipitation of a specific T1 oligonucleotide containing the element from the 25S fraction. Precipitation of this fragment from reaction mixtures is blocked by the U----C mutation. However, neither ATP nor the downstream sequence element is required for binding of this factor in the nuclear extract, suggesting that recognition of the AAUAAA is an initial event in complex assembly.     

Poly(A) polymerase purified from HeLa cell nuclear extract is required for both cleavage and polyadenylation of pre-mRNA in vitro.

We have partially purified a poly(A) polymerase (PAP) from HeLa cell nuclear extract which is involved in the 3'-end formation of polyadenylated mRNA. PAP had a molecular weight of approximately 50 to 60 kilodaltons. In the presence of manganese ions, PAP was able to polyadenylate RNA nonspecifically. However, in the presence of magnesium ions PAP required the addition of a cleavage and polyadenylation factor to specifically polyadenylate pre-mRNAs that contain an intact AAUAAA sequence and end at the poly(A) addition site (precleaved RNA substrates). The purified fraction containing PAP was also required in combination with a cleavage and polyadenylation factor and a cleavage factor for the correct cleavage at the poly(A) site of pre-mRNAs. Since the two activities of the PAP fractions, PAP and cleavage activity, could not be separated by extensive purification, we concluded that the two activities are contained in a single component, a PAP that is also required for the specific cleavage preceding the polyadenylation of pre-mRNA.     

Elements upstream of the AAUAAA within the human immunodeficiency virus polyadenylation signal are required for efficient polyadenylation in vitro.

Recent in vivo studies have identified specific sequences between 56 and 93 nucleotides upstream of a polyadenylation [poly(A)] consensus sequence, AAUAAA, in human immunodeficiency virus type 1 (HIV-1) that affect the efficiency of 3'-end processing at this site (A. Valsamakis, S. Zeichner, S. Carswell, and J. C. Alwine, Proc. Natl. Acad. Sci. USA 88:2108-2112, 1991). We have used HeLa cell nuclear extracts and precursor RNAs bearing the HIV-1 poly(A) signal to study the role of upstream sequences in vitro. Precursor RNAs containing the HIV-1 AAUAAA and necessary upstream (U3 region) and downstream (U5 region) sequences directed accurate cleavage and polyadenylation in vitro. The in vitro requirement for upstream sequences was demonstrated by using deletion and linker substitution mutations. The data showed that sequences between 56 and 93 nucleotides upstream of AAUAAA, which were required for efficient polyadenylation in vivo, were also required for efficient cleavage and polyadenylation in vitro. This is the first demonstration of the function of upstream sequences in vitro. Previous in vivo studies suggested that efficient polyadenylation at the HIV-1 poly(A) signal requires a spacing of at least 250 nucleotides between the 5' cap site and the AAUAAA. Our in vitro analyses indicated that a precursor containing the defined upstream and downstream sequences was efficiently cleaved at the polyadenylation site when the distance between the 5' cap and the AAUAAA was reduced to at least 140 nucleotides, which is less than the distance predicted from in vivo studies. This cleavage was dependent on the presence of the upstream element.