Comparison of decay resistance of wood and wood-polymer composite prepared by in-situ polymerization of monomers

Fast-growing plant wood Populus ussuriensis Kom, and Micheliamacclurel wood were respectively modified by formation of wood-polymer composite to improve their decay resistance. Two functional monomers, glycidyl methacrylate and ethylene glycol dimethacrylate, added with a few Azo-bis-isobutryonitrile as initiator, and maleic anhydride as catalyst, were first impregnated into wood cell lumen under a vacuum-pressure condition, and then in-situ polymerized into copolymers through a catalyst-thermal treatment. The decay resistances of untreated wood and wood-polymer composites were assessed by weight loss and compared by SEM observations. SEM and FTIR analysis indicated that the in-situ polymerized copolymers fully filled up wood cell lumen and also grafted onto wood cell walls, resulting in the blockage of passages for microorganisms and moisture to wood cell walls. Thus, the decay resistance of poplar wood-polymer composite and Micheliamacclurel wood-polymer composite against brown rot fungus and white rot fungus in terms of weight loss achieved 3.43–3.92% and 1.04–1.33%, improved 95.06–95.18% and 95.10–95.35% than those of untreated poplar wood and Micheliamacclurel wood, respectively; and also respectively higher than that of boron-treated wood. The SEM observations for the decayed poplar wood, Micheliamacclurel wood and their corresponding treated wood also showed the remarkable improvement of decay resistance of wood after such treatment, which effectively protected wood from degradation by fungi.     

Chelating efficiency and thermal, mechanical and decay resistance performances of chitosan copper complex in wood-polymer composites

Wood–polymer composites (WPC) have been extensively used for building products, outdoor decking, automotive, packaging materials, and other applications. WPC is subject to fungal and termite attacks due to wood components enveloped in the thermoplastic matrix. Much effort has been made to improve decay resistance of WPC using zinc borate and other chemicals. In this study, chitosan copper complex (CCC) compounds were used as a potential preservative for wood–HDPE composites. CCC was formulated by reacting chitosan with copper salts under controlled conditions. Inductively coupled plasma (ICP) analytical results indicated that chitosan had high chelating efficiency with copper cations. CCC-treated wood–HDPE composites had a thermal behavior similar to untreated and zinc borate-treated wood–HDPE composites. Incorporation of CCC in wood–HDPE composites did not significantly influence board density of the resultant composites, but had a negative effect on tensile strength at high CCC concentration. In comparison with solid wood and the untreated wood–HDPE composites, 3% CCC-treated wood–HDPE composites significantly improved the decay resistance against white rot fungus Trametes versicolor and brown rot fungus Gloeophyllum trabeum. Especially, CCC-treated wood–HDPE composites were more effectively against the brown rot than the untreated and chitosan-treated wood–HDPE composites. Moreover, CCC-treated wood–HDPE composites performed well as zinc borate-treated wood–HDPE composites on fungal decay resistance. Accordingly, CCC can be effectively used as a preservative for WPC.     

Cellulase production from immobilized growing cell composites prepared by radiation polymerization

The cellulase production from immobilized Trichoderma reesei composites prepared by radiation polymerization at low temperature was studied. The production of cellulase from the cells irradiated by radiation was slightly retarded at the initial stage of the culture, but was immediately recovered. The production of cellulase resulting from the growth of the immobilized cells proceeds efficiently in the composite having a porous polymer matrix, in which the productivity of cellulase varied with the hydrophilicity, the shape of the composite, monomer, and cell concentration. It was found that cellulase produced by immobilized growing cell composites effectively hydrolyzed cellulosic wastes such as newspaper and chaff which are pretreated by irradiation and crushing.     

The in vivo anthelmintic efficacy of some Verbascum species growing in Turkey

Verbascum L. (Scrophulariaceae) species are used for desiccating wounds and as a fish poison in Anatolia as well as for diarrhea and dysentery of animals in several countries. To further evaluate their activity, methanolic extracts obtained from 13 Verbascum species growing in Turkey, including V. chionophyllum Hub.-Mor., V. cilicicum Boiss., V. dudleyanum (Hub.-Mor.) Hub.-Mor., V. lasianthum Boiss., V. latisepalum Hub.-Mor., V. mucronatum Lam., V. olympicum Boiss., V. pterocalycinum var. mutense Hub.-Mor., V. pycnostachyum Boiss. & Heldr., V. salviifolium Boiss., V. splendidum Boiss., V. stachydifolium Boiss. & Heldr. and V. uschackense (Murb.) Hub.-Mor. were evaluated for their in vivo anthelmintic activity. The extracts from V. lasianthum, V. latisepalum, V. mucronatum and V. salviifolum showed the highest inhibitory rates against Aspiculuris tetraptera at 100 mg/kg in mice. Additionally, extracts from V. dudleyanum and V. pterocalycinum var. mutense were found generally highly effective. The remaining species did not show any activity. Results of the present study support the utilization of these plant species employed in Turkish folk medicine.     

RAPD and FAME analyses of Astragalus species growing in eastern Anatolia region of Turkey

Fatty acid (FAs) and RAPD profiles were used to examine phenotypic and genetic relationships between eight Astragalus species including Astragalus maximus Willd. var. maximus, Astragalus coadunatus Hub. Mor. & Chamb., Astragalus kurdicus Boiss. var. kurdicus, Astragalus lagurus Willd, Astragalus christianus L., Astragalus cicer L., Astragalus atrocarpus Champ & Matthews and Astragalus onobrychioides Bieb., which were wildly growing in eastern Anatolia region of Turkey. All of the eight Astragalus species tested in this study were separated based on the presence and composition of 45 different FAs. Four of the Astragalus species including A. coadunatus, A. lagurus, A. christianus, and A. atrocarpus were rich in terms of FA contents containing at least 22–31 different FAs. The relative proportions of two fatty acids, 16:0, and 18:1:ω8c were higher in these four Astragalus species. The remaining species have limited number of FAs with unique FAMEs profiles. Six of the 10 decamer primers examined were selected to find out genetic polymorphism in Astragalus species. A total of 98 polymorphic bands were observed, ranging in size from 250 bp to 3000 bp. The RAPD results suggested that A. atrocarpus, A. onobrychioides and A. kurdicus are closely related and completely different from the other species. Six genetically distinct groups were found among the species of Astragalus. High genetic variations among Astragalus species growing wildly in eastern Anatolia region of Turkey may imply the differences in their origins. The results in the present study suggested that both RAPD and FA analyses are useful for differentiation of Astragalus species.     

Mechanical properties of polyurethane foams prepared from liquefied corn stover with PAPI

Corn stover was liquefied by using ethylene carbonate (EC) as liquefying solvent and 97% sulfur acid as catalyst at 170 degrees C for 90 min. Polyurethane (PU) foams were prepared from liquefied corn stover (LCS) with variable amount of polymethylene polyphenylisocyanate (PAPI) by one-shot method, with water as blowing agent, silicone as surfactant and triethylamine and dibutyltine dilaurate as co-catalyst. The mechanical properties of LCS-PU foam with different [NCO]/[OH] ratio were studied on a universal tensile tester. With the increase of [NCO]/[OH] ratio from 0.4 to 1.0, the tensile strength and Young's modulus of the LCS-PU foam first raised, reached their maximum values at [NCO]/[OH] ratio of 0.8, and then declined; while the elongation at break decreased from 117% to 3.6%. The results indicated that by changing the [NCO]/[OH] ratio, mechanical properties of LCS-PU foams could be adjusted for various end uses.     

Analysis of genetic relationships among perennial and annual Cicer species growing in Turkey using RAPD markers

Random amplified polymorphic DNA (RAPD) fragments were used to assess genetic relationships among Cicer spp. growing in Turkey. Seven 10-mer primers selected from a 50 random oligonucleotide primer set, depending on their ability to amplify genomic DNA in all species, were used to detect RAPD variation in 43 wild and cultivated accessions representing ten species. These primers yielded 95 reproducible amplification products, 92 of which were polymorphic. Pairwise genetic distances of accessions estimated according to Nei and Li (1979) were used to produce a dendrogram using UPGMA. The dendrogram contained two main clusters, one of which comprised accessions of the four perennial species (Cicer montbretii, Cicer isauricum, Cicer anatolicum and Cicer incisum) together with the accessions of the three annual species (Cicer pinnatifidum, Cicer judaicum and Cicer bijugum), and the other cluster included the remaining three annual species (Cicer echinospermum, Cicer reticulatum and Cicer arietinum). Analysis of RAPD variation showed that C. incisum is the most similar perennial species to annuals, and C. reticulatum is the closest annual species to chickpea. These results generally agree with our allozyme study which was carried out using same Cicer collection and previous studies of relationships among annual species. The results also show that RAPD markers can be used to distinguish Cicer species and to survey genetic variation and relationships among taxonomic units in this genus.     

Comparative study of the DNA-binding HU-type proteins from slow growing and fast growing strains of Rhizobiaceae

The DNA-binding HU-type proteins have been isolated from two very different strains of Rhizobiaceae: Agrobacterium tumefaciens and Rhizobium japonicum. These proteins have been called HAt and HRj respectively. Their electrophoretic mobility on polyacrylamide gel, amino acid composition and crossed immunoreactivity have been compared to that of the homologous protein isolated from Rhizobium meliloti: the protein HRm. The proteins HAt and HRm show close similarities whereas the protein HRj differs markedly from the two others. The physico-chemical characteristics of the HU-type proteins from these Rhizobiaceae are in good agreement with the respective position of these bacteria in the taxonomy.     

A new species of Lens from south-east Turkey

A new species of Lens (Leguminosae), L. tomentosus , is described. It resembles L. culinaris except in its tomentose pods. Karyotypically it differs from other Lens species by the satellited chromosome which is much smaller, extremely asymmetrical and bears a minute satellite. Lens tomentosus is reproductively isolated from all other Lens species. Hybrids cannot be obtained because of embryo abortion, and irregular meiosis in hybrids raised via embryo culture. Currently, three populations of L. tomentosus are known in the Mardin area, south-east Turkey.     

Evaluation of the decay resistance properties of Cerbera odollam extracts and their influence on properties of particleboard

Metallic-based wood preservatives currently face some restrictions over disposal and environmental issues; one possibility to develop new more benign systems is to study extractives in naturally durable woody plants. This study investigated the resistance of extracts from the leaf, fruit, wood, bark, seed and flower of Cerbera odollam to deterioration from fungus and termites. Antifungal assays with n-hexane, ethyl acetate, ethanol and methanol extracts were evaluated using paper discs. Termite mortality was evaluated with the methanol extract against Coptotermes gestroi. Physical and protective properties of particleboard impregnated with C. odollam extracts, including thickness swelling, internal bond strength, formaldehyde release, termite-decay and soil burial decay were investigated. Methanol wood extracts from C. odollam showed the highest activities against Trametes versicolor, Pycnoporus sanguineus, and Schizophyllum commune in the paper disc antifungal assay. Methanol flower extracts exhibited high performance in termite mortality, termite-decay and soil burial decay. Thickness swelling, internal bond strength and the formaldehyde emission of particleboard specimens treated with methanol extracts of C. odollam were up to the EN Standards.     

Urethane interaction with nucleic acids and proteins from non-malignant fast growing tissues

The interaction of urethane metabolite(s) with macromolecules in tissues of pregnant and partially hepatectomized mice was studied. Pregnant mice were treated with tritiated urethane on the 17th day of pregnancy. Partially hepatectomized mice were studied at 72 h and 198 h after the operation. Operated mice were injected with tritiated urethane, 6 h before killing. It was observed that the specific radioactivity of lung DNA was highest in pregnant mice whereas in partially hepatectomized mice the specific radioactivities of lung DNA and regenerating liver DNA were comparable. It was also observed that binding to macromolecules was greatest at 72 h when the highest mitotic activity in regenerating liver occurs.     

Semiconductor properties of melanins prepared from catecholamines

D. C. dark - and photoconductivity measurements were performed with synthetic melanins prepared by oxidative polymerization of dopamine, adrenaline, adrenochrome and adrenolutin. The melanins examined show significant differences in conductivity, thermal activation energy and photocurrent intensity values. The differences in semiconductor properties observed between the melanins reflect the structure differences of catecholamine-melanin polymers.     

Mutagenic and antimutagenic properties of some lichen species grown in the Eastern Anatolia Region of Turkey

All the methanol extracts did not show mutagenic activity in Ames/Salmonella and Z. mays MI test systems. Furthermore, some extracts showed significant antimutagenic activity against 9-AA in Ames test system. Inhibition rates for 9-AA mutagenicity ranged from 25.51% (P. furfuracea??0.05 ??g/plate) to 66.14% (C. islandica??0.05 ??g/plate). In addition, all of the extracts showed significant antimutagenic activity against sodium azide (NaN₃) mutagenicity on MI values of Z. mays.     

A new species of Viola (Violaceae) from Turkey

A new species of Viola , V. kizildaghensis M. Dinç & S¸. Ẏlḋṙml̇, from Turkey is described and illustrated. It is found on the rocky slopes of K̇żldǎ, K̇żldǎ National Park, in the vilayet of Isparta, south-west Turkey, at an elevation of 1350–1600 m. It belongs to Viola , subsection Viola , and is similar to the Lebanese endemic V. libanotica Boiss., distinguished by its lanceolate, cuneate based leaves, pinkish-purple flowers with white throats, glabrous lateral petals, and peduncles bearing the mature fruit procumbent and pubescent. It is somewhat similar to another species from south-west Turkey, V. sandrasea Melchior, that is endemic to Sandras Dǎ in the vilayet Mǔla; it is distinguished from this by the characters listed above, its pubescent leaves and peduncles, and its linear-lanceolate to lanceolate stipules which have short, gland-tipped fimbriae. © 2002 The Linnean Society of London, Botanical Journal of the Linnean Society , 2002, 138 , 483–487.     

A new species of Nigella (Ranunculaceae) from Turkey

Nigella turcica a new species endemic to north-eastern Turkey is described and illustrated. Morphological differences between the species and the closely related species, N. sativa , are discussed and the IUCN threatened category is proposed. A distribution map of the new species and its related taxon is given.  © 2004 The Linnean Society of London, Botanical Journal of the Linnean Society , 2004, 146 , 251–255.