Tunable excitation properties of ZnCdS:Mn/ZnS quantum dots for cancer imaging

Water‐soluble ZnS:Mn quantum dots (QDs) were synthesized using a hydrothermal method with 3‐mercaptopropionic acid as stabilizer. The optical properties of ZnS:Mn QDs were thoroughly investigated by tuning the doping concentration of Mn²⁺ and the Zn/S precursor ratio, to obtain an optimal parameter for QDs with excellent fluorescence characteristics. ZnS:Mn QDs excited at only one wavelength, however, which seriously limited their further application. Here, a trace Cd ion was doped into a ZnS host, resulting in QD excitation covering a wide adjustable waveband. Furthermore, when a ZnS shell was coated onto the surface of the ZnCdS:Mn QDs, photoluminescence intensity and stability were further enhanced. After coupling with an anti‐CK 19 antibody, the ZnCdS:Mn/ZnS core/shell QDs were able to function by labeling cancer cells, indicating that they could be considered as a suitable bio‐probe for cells and tissue imaging.     

Characterization and cancer cell targeted imaging properties of human antivascular endothelial growth factor monoclonal antibody conjugated CdTe/ZnS quantum dots

High luminescence quantum yield water‐soluble CdTe/ZnS core/shell quantum dots (QDs) stabilized with thioglycolic acid were synthesized. QDs were chemically coupled to fully humanized antivascular endothelial growth factor₁₆₅ monoclonal antibodies to produce fluorescent probes. These probes can be used to assay the biological affinity of the antibody. The properties of QDs conjugated to an antibody were characterized by ultraviolet and visible spectrophotometry, fluorescent spectrophotometry, sodium dodecyl sulfate–polyacrylamide gel electrophoresis, transmission electron microscopy and fluorescence microscopy. Cell‐targeted imaging was performed in human breast cancer cell lines. The cytotoxicity of bare QDs and fluorescent probes was evaluated in the MCF‐7 cells with an MTT viability assay. The results proved that CdTe/ZnS QD–monoclonal antibody nanoprobes had been successfully prepared with excellent spectral properties in target detections. Surface modification by ZnS shell could mitigate the cytotoxicity of cadmium‐based QDs. The therapeutic effects of antivascular endothelial growth factor antibodies towards cultured human cancer cells were confirmed by MTT assay. Copyright © 2014 John Wiley & Sons, Ltd.     

Sodium 4‐mercaptophenolate capped CdSe/ZnS quantum dots as a fluorescent probe for pH detection in acidic aqueous media

Development of the fluorescent pH detection method is promising due to the sensitivity, easy operation, and low‐cost, etc. However, traditional organic fluorophores have still some disadvantages such as the tedious preparation and purification as well as low photostability and water solubility, which limits the rapid detection application. Semiconductor quantum dots (QDs) have recently risen to prominence as an alternative for organic fluorophores in fluorescence analysis by virtue of their convenient synthesis and superior optical properties. In this study, we report on sodium 4‐mercaptophenolate functionalized CdSe/ZnS QDs (denoted as ^?OPhS‐QDs), which can serve as a selective “on–off” fluorescence probe for aqueous media pH. ^?OPhS‐QDs exhibit strong fluorescence in near neutral medium. As a Lewis organic base, ^?OPhS‐ moieties on QDs surface easily binds to proton under acidic conditions to yield 4‐mercaptophenol capped QDs (i.e. HOPhS‐QDs), which acts as an efficient hole trapper. As a result, the QDs photoluminescence (PL) is switched off. Under optimal conditions, the present probe exhibits a good linear relationship between fluorescence response and pH values in the pH range 3.0–5.2. Furthermore, the present probe exhibits a high selectivity for proton over other common cations and has been successfully used for pH detection in real water samples.     

Aqueous synthesis of CdTe/CdS/ZnS quantum dots and their optical and chemical properties

In this paper, we described a strategy for synthesis of thiol‐coated CdTe/CdS/ZnS (core–shell–shell) quantum dots (QDs) via aqueous synthesis approach. The synthesis conditions were systematically optimized, which included the size of CdTe core, the refluxing time and the number of monolayers and the ligands, and then the chemical and optical properties of the as‐prepared products were investigated. We found that the mercaptopropionic acid (MPA)‐coated CdTe/CdS/ZnS QDs presented highly photoluminescent quantum yields (PL QYs), good photostability and chemical stability, good salt tolerance and pH tolerance and favorable biocompatibility. The characterization of high‐resolution transmission electron microscopy (HRTEM), X‐ray powder diffraction (XRD) and fluorescence correlation spectroscopy (FCS) showed that the CdTe/CdS/ZnS QDs had good monodispersity and crystal structure. The fluorescence life time spectra demonstrated that CdTe/CdS/ZnS QDs had a longer lifetime in contrast to fluorescent dyes and CdTe QDs. Furthermore, the MPA‐stabilized CdTe/CdS/ZnS QDs were applied for the imaging of cells. Compared with current synthesis methods, our synthesis approach was reproducible and simple, and the reaction conditions were mild. More importantly, our method was cost‐effective, and was very suitable for large‐scale synthesis of CdTe/CdS/ZnS QDs for future applications. Copyright © 2010 John Wiley & Sons, Ltd.     

Enhancement of cell internalization and photostability of red and green emitter quantum dots upon entrapment in novel cationic nanoliposomes

Two quantum dots (QDs), a green emitter, CdSe and a red emitter, CdSe with ZnS shell are encapsulated into novel liposomes in two different formulations including cationic liposomes. Quantum dots have proven themselves as powerful inorganic fluorescent probes, especially for long‐term, multiplexed imaging and detection. Upon delivery into a cell, in endocytic vesicles such as endosomes, their fluorescence is quenched. We have investigated the potential toxic effects, photophysical properties and cell internalization of QDs in new formulation of liposomes as an in vitro vesicle model. Entrapment of QDs into liposomes is brought about with a decrease in their intrinsic fluorescence and toxicities and an increase in their photostability and lifetime. The biomimetic lipid bilayer of liposomes provides high biocompatibility, thereby enhancing the effectiveness of fluorescent nanoparticles for biological recognition in vitro and in vivo. The prepared lipodots could effectively prevent QDs from photo‐oxidation during storage and when exposed to ultraviolet (UV) light. Moreover, the flow cytometry of HEK 293 T cells showed that the cell internalization of encapsulated QDs in (DSPC/CHO/DOPE/DOAB) liposome is enhanced 10 times compared with non‐encapsulated QD (bare QDs).     

Comprehensive study of interaction between biocompatible PEG‐InP/ZnS QDs and bovine serum albumin

Polyethylene glycol (PEG) surface modified biocompatible InP/ZnS quantum dots (QDs) act as a potential alternative for conventional carcinogenic cadmium‐based quantum dots for in vivo and in vitro studies. Comprehensively, we studied the interaction between a model protein bovine serum albumin (BSA) and PEGylated toxic free InP/ZnS QDs using various spectroscopic tools such as absorption, fluorescence quenching, time resolved and synchronous fluorescence spectroscopic measurements. These studies principally show that tryptophan (Trp) residues of BSA have preferable binding affinity towards PEG‐InP/ZnS QDs surface and a blue shift in Trp fluorescence emission is a signature of conformational changes in its hydrophobic microenvironment. Photoluminescence (PL) intensity of Trp is quenched by ground state complex formation (static quenching) at room temperature. However, InP/ZnS@BSA conjugates become unstable with increasing temperature and PL intensity of Trp is quenched via dynamic quenching by PEG‐InP/ZnS QDs. Experimentally determined thermodynamic parameters for these conjugates have shown spontaneity, entropy driven and exothermic nature of bio‐conjugation. The calculated binding affinity (n ? 1, Hill coefficient) suggest that the affinity of InP/ZnS QDs for a BSA protein is not dependent on whether or not other BSA proteins are already bound to the QD surface. Energy transfer efficiency (E), Trp residue to InP/ZnS QDs distances and energy transfer rate (k_T) were all obtained from FÖrster resonance energy.     

High efficiency transport of quantum dots into plant roots with the aid of silwet L-77

Quantum dots (QDs) are a novel type of small, photostable and bright fluorophores that have been successfully applied to mammalian and human live cell imaging. In this study, highly dispersive water-soluble mercaptoacetic acid (MAA)-coated CdSe/ZnS QDs were synthesized, which were suitable for investigation as fluorescent probe labels. The treatment of maize seedling roots with QDs showed that the surfactant silwet L-77 aided the efficient transport of QDs into maize roots. Under a concentration ranging from 0.128 to 1.28 μM, QDs caused very low cytotoxicity on maize seed germination and root growth. The addition of mercuric chloride to the Hoagland solution resulted in a decrease of QD content in root tissues, and this decrease was reversed upon the addition of β-mercaptoethanol, which suggests that mercury-sensitive processes play a significant role in regulating QD flow in the maize root system. We speculate that the apoplastic pathway can contribute substantially to the total quantity of QDs reaching the stele. Therefore, based on this transport approach, MAA-coated QDs can be utilized for live imaging in plant systems to verify known physiological processes.     

The interaction of CuInS2/ZnS/TGA quantum dots with tyrosine kinase inhibitor and its application

The interactions between thioglycolic acid‐capped‐CuInS₂/ZnS quantum dots (CuInS₂/ZnS/TGA QDs) and tyrosine kinase inhibitor (TKI) were investigated using fluorescence, ultraviolet–visible spectrometry and Fourier transform infrared spectrometry. The results indicated that the fluorescence intensity of CuInS₂/ZnS/TGA could be quenched by imatinib, dasatinib, nilotinib, gefitinib and erlotinib, which hinted that CuInS₂/ZnS/TGA QDs could be used in the detection of TKI in active pharmaceutical ingredients (API). Calibration curves showed good linear correlation and low detection limits. The average recovery was between 98 and 102%. Moreover, the nature of the fluorescence quenching mechanism of CuInS₂/ZnS/TGA QDs by TKI was discussed. A ground state complex was formed by hydrogen bonding between the carboxyl group of CuInS₂/ZnS/TGA QDs and the amino group of TKI. This led to an increase in non‐radiative transition and fluorescence quenching of CuInS₂/ZnS/TGA QDs. Copyright © 2014 John Wiley & Sons, Ltd.     

Application of quantum dots as probes for correlative fluorescence, conventional, and energy-filtered transmission electron microscopy.

Luminescent semiconductor quantum dots (QDs) are a new class of fluorescent label with wide-ranging applications for cell imaging. The electron density and elemental composition of these materials permit the extension of their use as probes in conventional electron microscopy (TEM) and energy-filtered TEM (EFTEM). Here we illustrate the feasibility of using streptavidin-conjugated QDs as TEM tags by labeling a nuclear protein on cell sections and obtaining correlative fluorescence and TEM data. We also show that QD probes can be employed in conjunction with immunogold for co-localization of proteins at the ultrastructural level. Furthermore, by obtaining cadmium elemental maps of CdSe/ZnS QDs distributed on a nuclear structure, we demonstrate the potential of QDs for co-localization of multiple proteins when used in combination with EFTEM.     

Imaging the lateral diffusion of membrane molecules with quantum dots

This protocol describes a sensitive approach to tracking the motion of membrane molecules such as lipids and proteins with molecular resolution in live cells. This technique makes use of fluorescent semiconductor nanocrystals, quantum dots (QDs), as a probe to detect membrane molecules of interest. The photostability and brightness of QDs allow them to be tracked at a single particle level for longer periods than previous fluorophores, such as fluorescent proteins and organic dyes. QDs are bound to the extracellular part of the object to be followed, and their movements can be recorded with a fluorescence microscope equipped with a spectral lamp and a sensitive cooled charge-coupled device camera. The experimental procedure described for neurons below takes about 45 min. This technique is applicable to various cultured cells.     

Development of a quantum dot molecularly imprinted polymer sensor for fluorescence detection of atrazine

Atrazine is a common agricultural pesticide which has been reported to occur widely in surface drinking water, making it an environmental pollutant of concern. In the quest for developing sensitive detection methods for pesticides, the use of quantum dots (QDs) as sensitive fluorescence probes has gained momentum in recent years. QDs have attractive and unique optical properties whilst coupling of QDs to molecularly imprinted polymers (MIPs) has been shown to offer excellent selectivity. Thus, the development of QD@MIPs based fluorescence sensors could provide an alternative for monitoring herbicides like atrazine in water. In this work, highly fluorescent CdSeTe/ZnS QDs were fabricated using the conventional organometallic synthesis approach and were then encapsulated with MIPs. The CdSeTe/ZnS@MIP sensor was characterized and applied for selective detection of atrazine. The sensor showed a fast response time (5 min) upon interaction with atrazine and the fluorescence intensity was linearly quenched within the 2–20 mol L^?1 atrazine range. The detection limit of 0.80 × 10^?7 mol L^?1 is comparable to reported environmental levels. Lastly, the sensor was applied in real water samples and showed satisfactory recoveries (92–118%) in spiked samples, hence it is a promising candidate for use in water monitoring.     

Quenching of Fluorescence from CdSe/ZnS Nanocrystal QDs Near Copper Nanoparticles in Aqueous Solution

Significant quenching of fluorescence from CdSe/ZnS nanocrystal quantum dots (QDs) coated with mercaptoundecanoic ligands has been realized by copper nanoparticles (NPs). (a) Static quenching in the electrostatic association between the CdSe/ZnS QDs and cetyltrimethylammonium bromide-coated Cu NPs and (b) dynamic quenching of the same nanocrystals by polyvinylpyrrolidone-coated Cu NPs were studied. In both cases, the quenching of fluorescence from the CdSe/ZnS nanocrystals is sensitive to nanomolar concentrations of the copper NPs, and the quenching efficiency increases as spectral overlap between the CdSe/ZnS emission and the copper nanoparticle absorption increases. This suggests that the observed quenching is a result of energy transfer processes. These findings open new avenues for the utilization of Cu NPs in energy transfer-based applications.     

Continuous-flow reactor-based synthesis of carbohydrate and dihydrolipoic acid-capped quantum dots

A detailed protocol for the large-scale synthesis of carbohydrate and dihydrolipoic acid (DHLA)-coated CdSe/ZnS and CdTe/ZnS nanoparticles using continuous flow reactors is described here. Three continuous flow microreaction systems, operating at three different temperatures, are used for the synthesis of mannose-, galactose- or DHLA-functionalized quantum dots (QDs). In the first step of synthesis, the CdSe and CdTe nanoparticles are prepared. The size and spectral properties of the CdSe core of the nanoparticles are controlled by adjustment of the residence time and the temperature. As a second step, the zinc sulfide capping under homogenous conditions is carried out at a substantially lower temperature than is required for nanoparticle growth in batch processes. Finally, the trioctylphosphine/oleic acid ligand is effectively replaced with either carbohydrate PEG-thiol moieties or DHLA at 60 °C. This new protocol allows the synthesis of biologically active fluorescent QDs in 4 d.     

Colistin-functionalised CdSe/ZnS quantum dots as fluorescent probe for the rapid detection of Escherichia coli

Intensely fluorescent, colistin-functionalised CdSe/ZnS QDs (Colis-QDs) nanoparticles, are synthesized and used as sensitive probes for the detection of Escherichia coli, a Gram-negative bacteria. Colistin molecules are attached to the terminal carboxyl of the mercaptoacetic acid-capped QDs in the presence of 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS) as amide bond promoters. The TEM analysis of bacteria treated with Colis-QDs conjugates showed the accumulation of Colis-QDs in the cell wall of E. coli. Under the recommended working conditions, the method provides a detection limit as few as 28 E. coli cells per mL, which is competitive which more elaborate detection systems. The simplicity of the method together with short analysis time (< 15 min, without including preparation and photoactivation of the Colis-QDs conjugate) make the proposed approach useful as quick bacteria screening system.     

Preparation and Biological Effect of Nucleotide-Capped CdSe/ZnS Quantum Dots on Tetrahymena thermophila

In this paper, we described the preparation and characterization of different types of modified CdSe/ZnS quantum dots (QDs) and explored the biological effects of QDs with different surface modifications on the whole growth of unicellular protozoan Tetrahymena thermophila BF(5) using a thermal activity monitor air isothermal microcalorimeter. Our results demonstrated that adenosine 5'-monophosphate (AMP) showed stronger interaction with QDs than other types of nucleotide. AMP-QDs could stimulate the growth of T. thermophila while mercaptoacetic acid-capped CdSe/ZnS quantum dots inhibited it. In addition, the population density determination and fluorescence imaging of T. thermophila BF(5) also confirmed the results obtained from microcalorimetry. It is believed that this approach will provide a more convenient methodology for the kinetics and thermodynamics of microorganism when coexisting with QDs in real time, and all of which are very significant to understanding the effect of QDs to organism.     

In situ detection of salicylic acid binding sites in plant tissues

The determination of hormone‐binding sites in plants is essential in understanding the mechanisms behind hormone function. Salicylic acid (SA) is an important plant hormone that regulates responses to biotic and abiotic stresses. In order to label SA‐binding sites in plant tissues, a quantum dots (QDs) probe functionalized with a SA moiety was successfully synthesized by coupling CdSe QDs capped with 3‐mercaptopropionic acid (MPA) to 4‐amino‐2‐hydroxybenzoic acid (PAS), using 1‐ethyl‐3‐(3‐dimethyllaminopropyl) carbodiimide (EDC) as the coupling agent. The probe was then characterized by dynamic light scattering and transmission electron microscopy, as well as UV/vis and fluorescence spectrophotometry. The results confirmed the successful conjugation of PAS to CdSe QDs and revealed that the conjugates maintained the properties of the original QDs, with small core diameters and adequate dispersal in solution. The PAS–CdSe QDs were used to detect SA‐binding sites in mung bean and Arabidopsis thaliana seedlings in vitro and in vivo. The PAS–CdSe QDs were effectively transported into plant tissues and specifically bound to SA receptors in vivo. In addition, the effects of the PAS–CdSe QDs on cytosolic Ca²⁺ levels in the tips of A. thaliana seedlings were investigated. Both SA and PAS–CdSe QDs had similar effects on the trend in cytosolic‐free Ca²⁺ concentrations, suggesting that the PAS–CdSe QDs maintained the bioactivity of SA. To summarize, PAS–CdSe QDs have high potential as a fluorescent probe for the in vitro/in vivo labeling and imaging of SA receptors in plants. Copyright © 2014 John Wiley & Sons, Ltd.     

Bioconjugation of InGaP quantum dots for molecular sensing

Fluorescence-based molecular sensing and cellular imaging are commonly carried out with the application of organic dyes. Quantum dots (QDs) are now recognized as better tools because they are brighter, size tunable, and more photostable than dyes. Most of the proposed QD-based biosensing systems involve elements of known toxicity. The present work reports the functionalization of biocompatible InGaP/ZnS core-shell QDs with anti-bovine serum albumin (anti-BSA) to exploit them as fluorescent probes for antigen detection. Successful bioconjugation was characterized with the absorption and emission spectra showing blue shifts of around 40 and 30 nm, respectively. Gel electrophoresis and particle size distribution studies further confirmed the mass increment of QDs after their functionalization with anti-BSA. Surface plasmon resonance spectrometry has been used to study the affinity of QD-(anti-BSA) probes for bovine serum albumin (BSA). Photoluminescence quenching of the developed probe is observed in the presence of BSA.     

Fluorescent probe for detection of Cu2+ using core‐shell CdTe/ZnS quantum dots

Core‐shell CdTe/ZnS quantum dots capped with 3‐mercaptopropionic acid (MPA) were successfully synthesized in aqueous medium by hydrothermal synthesis. These quantum dots have advantages compared to traditional quantum dots with limited biological applications, high toxicity and tendency to aggregate. The concentration of Cu²⁺ has a significant impact on the fluorescence intensity of quantum dots (QDs), therefore, a rapid sensitive and selective fluorescence probe has been proposed for the detection of Cu²⁺ in aqueous solution. Under optimal conditions, the fluorescence intensity of CdTe/ZnS QDs was linearly proportional to the concentration of Cu²⁺ in the range from 2.5 × 10^–9 M to 17.5 × 10^–7 M with the limit of 1.5 × 10^–9 M and relative standard deviation of 0.23%. The quenching mechanism is static quenching with recoveries of 97.30–102.75%. Copyright © 2015 John Wiley & Sons, Ltd.     

Labeling of BSA and imaging of mouse T‐lymphocyte as well as mouse spleen tissue by l‐glutathione capped CdTe quantum dots

l ‐glutathione capped highly fluorescent CdTe quantum dots (QDs) were prepared by an aqueous approach and used as fluorescent labels to link albumin bovine serum (BSA) and rat anti‐mouse CD4, which was expressed on mouse T‐lymphocyte and mouse spleen tissue. The sharp and narrow emission peaks showed that the as‐prepared QDs have desirable dispersibility, uniformity and good fluorescence properties. Both CdTe–BSA and CdTe–CD4 conjugates showed an enhancement of fluorescence intensity over that of bare CdTe QDs. The experimental result of gel electrophoresis confirmed the successful conjugation of CdTe–BSA and CdTe–CD4. The fluorescent microscopic images of CdTe–CD4 labeled mouse T‐lymphocyte cells and mouse spleen tissue were compared with that obtained from fluorescein isothiocyanate labeling. It was demonstrated that the CdTe QDs‐based probe exhibited much better photostability and fluorescence intensity than fluorescein isothiocyanate, showing a good application potential in the immuno‐labeling of cells and tissues. Copyright © 2009 John Wiley & Sons, Ltd.     

Incorporating fluorescent dyes and quantum dots into magnetic microbeads for immunoassays

Microbeads that are both paramagnetic and fluorescently labeled are commercially available in colors spanning the visible spectrum. Although these commercial beads can be bright, polydispersity in both size and fluorescent intensity limit their use in quantitative assays. Very recently, more monodisperse beads have become available, but their large size and surface properties make them less than ideal for some bioassay applications. Here we describe methods to customize commercial nonfluorescent magnetic microparticles with fluorescent dyes and quantum dots (QDs) without affecting their magnetic or surface chemical properties. Fluorescent dyes and 3.3-nm diameter CdSe/ZnS QDs were sequestered within 0.8-micron diameter magnetic beads by swelling the polystyrene matrix of the bead in organic solvent, letting the chromophores partition, and then collapsing the matrix in polar solvents. Chromophore incorporation has been characterized using both UV-visible absorption spectroscopy and fluorescence microscopy, with an average of 3 x 10(8) rhodamine 6G molecules/bead and 6 x 10(4) QDs/bead. The modified beads are uniform in size and intensity, with optical properties comparable to currently available commercial beads. Immunoassay results obtained with our custom fluorescent magnetic microbeads are consistent with those obtained using conventional magnetic microbeads.