Preparation of transparent photoluminescence smart window by integration of rare-earth aluminate nanoparticles into recycled polyethylene waste

Novel photoluminescent nanocomposite sheets were prepared for simple commercial manufacturing of transparent and luminous photochromic smart windows. A simple physical integration of lanthanide-doped strontium aluminium oxide (LdSAO) nanoparticles into recycled polyethylene (PE) waste produced a smart nanocomposite with persistent phosphorescence and photochromic properties. Because the nanoparticle form of LdSAO is important for developing transparent materials, LdSAO nanoparticles were well dispersed in the PE matrix. Both the morphologies and chemical compositions of the LdSAO nanoparticles and LdSAO-containing luminescent PE sheets were investigated. Both LdSAO-free and photoluminescent PE sheets were colourless in normal daylight. However the LdSAO-containing PE luminescent samples only exhibited a brilliant green colour under ultraviolet (UV) light and a greenish-yellow colour in the dark as verified by Commission Internationale de l'éclairage laboratory parameters. Both absorbance and emission bands were monitored at 377 and 436/517 nm, respectively. The LdSAO-containing PE luminescent sheets were compared with the LdSAO-free sample using both photoluminescence spectroscopy and for their mechanical properties and were found to have improved scratch resistance, UV protection, and superhydrophobic activity. Due to the added LdSAO, photoluminescence, decay, and lifetime spectral tests confirmed its photochromic fluorescence and long-lasting phosphorescence characteristics. The PE@LdSAO nanocomposite sheets displayed UV protection, photostability, hydrophobicity, and excellent durability compared with the blank LdSAO-free PE sheet.     

Very small photoluminescent gold nanoparticles for multimodality biomedical imaging

An original synthesis method based on X-ray irradiation produced gold nanoparticles (AuNPs) with two important properties for biomedical research: intense visible photoluminescence and very high accumulation in cancer cells. The nanoparticles, coated with MUA (11-mercaptoundecanoid acid), are very small (1.4 nm diameter); the above two properties are not present for even slightly larger sizes. The small MUA-AuNPs are non-cytotoxic (except for very high concentrations) and do not interfere with cancer cell proliferation. Multimodality imaging using visible light fluorescence and X-ray microscopy is demonstrated by tracing the nanoparticle-loaded tumor cells.     

Biosynthesis of fluorescent gold nanoparticles using an edible freshwater red alga,Lemanea fluviatilis (L.) C.Ag. and antioxidant activity of biomatrix loaded nanoparticles

Biosynthesis of gold nanoparticles has been accomplished via reduction of an aqueous chloroauric acid solution with the dried biomass of an edible freshwater epilithic red alga, Lemanea fluviatilis (L.) C.Ag., as both reductant and stabilizer. The synthesized nanoparticles were characterized by UV–visible, powder X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR), and dynamic light scattering (DLS) studies. The UV–visible spectrum of the synthesized gold nanoparticles showed the surface plasmon resonance (SPR) at around 530 nm. The powder XRD pattern furnished evidence for the formation of face-centered cubic structure of gold having average crystallite size 5.9 nm. The TEM images showed the nanoparticles to be polydispersed, nearly spherical in shape and have sizes in the range 5–15 nm. The photoluminescence spectrum of the gold nanoparticles excited at 300 nm showed blue emission at around 440 nm. Gold nanoparticles loaded within the biomatrix studied using a modified 2,2-diphenyl-1-picrylhydrazyl (DPPH) method exhibited pronounced antioxidant activity.     

Graphene nanosheet reinforcement of polyurethane nanocomposite for green and sustainable photoluminescence,superhydrophobic, and anticorrosive paint

A simple and environmentally friendly method was developed for smart and efficient waterborne polyurethane (PUR) paint. Sugarcane bagasse was recycled into reduced graphene oxide nanosheets (rGONSs). Both lanthanide-doped aluminate nanoparticles (LAN; photoluminescent agent, 7–9 nm) and rGONSs (reinforcement agent) were integrated into a waterborne polyurethane to produce a novel photoluminescent, hydrophobic, and anticorrosive nanocomposite coating. Using ferrocene-based oxidation under masked circumstances, graphene oxide nanosheets were produced from sugarcane bagasse. The oxidized semicarbazide (SCB) nanostructures were integrated into polyurethane coatings as a drying, anticorrosion, and crosslinking agent. Polyurethane coatings with varying amounts of phosphor pigment were prepared and subsequently applied to mild steel. The produced paints (LAN/rGONSs@PUR) were tested for their hydrophobicity, hardness, and scratch resistance. Commission Internationale de l'éclairage (CIE) Laboratory parameters and photoluminescence analysis established the opacity and colourimetric properties of the nanocomposite coatings. When excited at 365 nm, the luminescent transparent paints emitted a strong greenish light at 517 nm. The anticorrosion characteristics of the coated steel were investigated. The phosphor-containing (11% w/w) polyurethane coatings displayed the most pronounced anticorrosion capability and long-persistent luminosity. The prepared waterborne polyurethane paints were very photostable and durable.     

Optical studies of CdS:Mn nanoparticles

Cadmium sulphide nanoparticles were grown using a wet chemical method, by dissolving the reactants, cadmium chloride and sodium sulphide in water, in the presence of mercaptoethanol (ME), which was used as a capping agent. Manganese chloride was used to dope the nanoparticles. It was found that the particle size varied with different concentrations of ME. At higher concentrations of ME, smaller sized nanoparticles were synthesized. This method also reveals the high stability of nanoparticles in water. Nanoparticle properties were investigated using UV–vis absorption, photoluminescence spectroscopy, X‐ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. The particle sizes were measured by the XRD technique, SEM and optical absorption spectra and were in the range 2–6 nm. Copyright © 2011 John Wiley & Sons, Ltd.     

Development of silica-coated rare-earth doped strontium aluminate toward superhydrophobic,anti-corrosive and long-persistent photoluminescent epoxy coating

Long-persistent phosphorescent smart paints have the ability to continue glowing in the dark for a prolonged time period to function as energy-saving products. Herein, new epoxy/silica nanocomposite paints were prepared with different concentrations of lanthanide-doped aluminate nanoparticles (LAN; SrAl₂O₄:Eu²⁺,Dy³⁺). The LAN pigment was firstly coated with silicon dioxide (SiO₂) utilizing the heterogeneous precipitation technique to provide LAN-encapsulated between SiO₂ nanoparticles (LAN@SiO₂). The epoxy/silica/lanthanide-doped aluminate nanoparticles (ESLAN) nanocomposite paints were coated on steel. The prepared ESLAN paints were studied by transmission electron microscopy (TEM), Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), X-ray fluorescence (XRF) analysis, and energy-dispersive X-ray spectroscopy (EDS). The transparency and coloration properties of the nanocomposite coated films were explored by CIE Lab parameters and photoluminescence spectra. The ultraviolet-induced luminescence properties of the transparent coated films demonstrated greenish phosphorescence at 518 nm upon excitation at 368 nm. Both hardness and hydrophobic activities were investigated. The anticorrosion activity of the nanocomposite films coated onto mild steel substrates immersed in aqueous sodium chloride (NaCl_(aq)) (3.5%) was studied by electrochemical impedance spectroscopy (EIS). The silica-containing coatings were monitored to exhibit anticorrosion properties. Additionally, the nanocomposite films with LAN@SiO₂ (25%) exhibited the optimized long-lasting luminescence properties in the dark for 90 min. The nanocomposite films showed highly reversible and durable long-lived phosphorescence.     

Synthesis and characterization of diphenyl quinoline and bromine‐activated diphenyl quinoline organic phosphors

A diphenyl quinoline (DPQ)‐conjugated derivative and bromine‐activated DPQ (Br‐DPQ) were synthesized in an inert gas atmosphere at 140 °C using Friedlander condensation. The compounds showed blue emission under a UV source. The structures were characterized by X‐ray diffraction and Fourier transform infrared spectroscopy. The photoluminescence properties of the compounds were analysed using excitation and emission spectra. The synthesized organic phosphors shows bright emission in the blue region, with peaks at 445 and 453 nm, respectively, for DPQ and Br‐DPQ in the powder form. The physical and photoluminescence properties of these organic compounds reveal promising blue emitters for high‐efficiency organic light‐emitting diodes. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis,effect of capping agents and optical properties of manganese‐doped zinc sulphide nanoparticles

Mn²⁺‐doped ZnS nanoparticles have been successfully synthesized by a chemical precipitation method, using non‐ionic surfactants such as PMMA and PEG. The particles were prepared in an air atmosphere at 80°C. X‐ray diffraction (XRD), transmission electron microscopy (TEM), UV‐visible and photoluminescence (PL) studies were used to investigate the effect of the capping agent on the size, morphology and optical properties of the ZnS–Mn²⁺ nanoparticles. Enhanced PL was observed from the surfactant‐capped ZnS–Mn²⁺ nanoparticles. The PL spectra showed a broad blue emission band in the range 460–445 nm and a Mn²⁺‐related yellow‐orange emission band in the range 581–583 nm. Copyright © 2012 John Wiley & Sons, Ltd.     

Photostability of quantum dot micelles under ultraviolet irradiation

Phospholipid quantum dot micelles are useful for bio‐applications because of their amphiphilicity and exceptional biocompatibilities. We investigated the uptake of phospholipid [polyethylene glycol (PEG), biotin, and folic acid terminated] modified CdSe/ZnS quantum dot micelles by cancer cells and its photostability under ultrviolet light in the C spectrum (UV‐C) (254 nm) or UV‐A (365 nm) light irradiation. The stability of micelles to the exposure of UV‐C and UV‐A light was assessed. Biotin‐modified quantum dot micelles give photoluminescence enhancement under UV‐C light irradiation. Folate modified micelle under UV‐C and UV‐A results show considerable photoluminescence enhancement. Photoluminescence lifetime measurements showed 7.04, 8.11 and 11.42 ns for PEG, folate, and biotin terminated phospholipid micelles, respectively. Folate and biotin‐modified quantum dot micelles showed excellent uptake by HeLa cells under fluorescence confocal microscopy. Phospholipid CdSe/ZnS quantum dot micelles can be potentially used for diagnosis and treatment of cancer in the future.     

Structural and optical properties of Cu‐doped ZnS nanoparticles formed in chitosan/sodium alginate multilayer films

Chitosan/alginate multilayers were fabricated using a spin‐coating method, and ZnS:Cu nanoparticles were generated within the network of two natural polysaccharides, chitosan and sodium alginate. The synthesized nanoparticles were characterized using an X‐ray diffractometer (XRD), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS) and atomic force microscopy (AFM). The results showed that cubic zinc blende‐structured ZnS:Cu nanoparticles with an average crystal size of ~ 3 nm were uniformly distributed. UV–vis spectra indicate a large quantum size effect and the absorption edge for the ZnS:Cu nanoparticles slightly shifted to longer wavelengths with increasing Cu ion concentrations. The photoluminescence of the Cu‐doped ZnS nanoparticles reached a maximum at a 1% doping level. The ZnS:Cu nanoparticles form and are distributed uniformly in the composite multilayer films with a surface average height of 25 nm. Copyright © 2013 John Wiley & Sons, Ltd.     

Thyme essential oil for antimicrobial protection of natural textiles

The study was aimed at increasing the resistance of lignocellulosic textiles to bacteria and mould action using a biocide of plant origin. The biocide used in the study was thyme essential oil. This kind of oil is characterized by low toxicity for humans and the environment. The antimicrobial efficiency of thyme essential oil applied to linen–cotton blended fabric and linen fabric was evaluated by determining bacterial growth, degree of mould growth, and their impact on fabric strength. Thyme essential oil applied as 8% concentration in methanol to linen–cotton blended fabric showed very high antibacterial and antifungal activity – no mould growth and no significant loss of breaking force were observed. Microscopic evaluation of the tested fabrics was also performed by Scanning Electron Microscopy. Applying the eco-friendly biocide to fabrics containing natural fibres in the finishing process produces antimicrobial barrier properties.     

Preparation of afterglow and photochromic fibrous mats from polypropylene plastics to detect ultraviolet light

Polypropylene textiles have been used in the development of various industrial products, such as automotives, plastic furniture, and medical tools. However, polypropylene resists dyeing due to a deficiency of active staining spots. Here, we developed a new strategy towards new afterglow and photochromic fibres from recycled polypropylene plastics using plasma-supported coloration with rare-earth activated aluminate nanoparticles (REANPs). Plasma curing was used to generate active dyeing sites on the polypropylene surface. A thin film of REANPs (2–10 nm) was deposited onto the plasma-pretreated polypropylene surface. Various analytical techniques were applied to inspect the morphology of the REANP-finished polypropylene fibres. The polypropylene dyeing activity was much improved after being exposed to plasma. Both photoluminescence analysis and Commission internationale de l’éclairage (CIE) laboratory coordinates proved that the polypropylene fibres exhibited a white colour in daylight and green in ultraviolet light. The thin afterglow layer immobilized onto the polypropylene surface exhibited an emission band of 524 nm upon excitation at 365 nm. The sliding angles dropped from 12° to 9°, but the contacting angles increased from 139.4° to 145.0° when the REANP ratio was raised. These findings show that REANP-finished polypropylene had good colourfastness, antimicrobial activity, and ultraviolet light blocking. Both stiffness and permeability to air of REANP-finished polypropylene were explored to designate excellent comfort characteristics.     

Antimicrobial cellulose acetate nanofibers containing silver nanoparticles

It was found for the first time that polymer nanofibers containing Ag nanoparticles on their surface could be produced by UV irradiation of polymer nanofibers electrospun with small amounts of silver nitrate (AgNO₃). When the cellulose acetate (CA) nanofibers electrospun from CA solutions with 0.5 wt% of AgNO₃ were irradiated with UV light at 245 nm, Ag nanoparticles were predominantly generated on the surface of the CA nanofibers. The number and size of the Ag nanoparticles were continuously increased up to 240 min. The Ag⁺ ions and Ag clusters diffused and aggregated on the surface of the CA nanofibers during the UV irradiation. The Ag nanoparticles with an average size of 21 nm exhibited strong antimicrobial activity.     

Eu3+-doped LaF3-based inorganic–organic hybrid nanostructured materials for broad-spectrum excitation and strong photoluminescence

Inorganic–organic hybrid nanoparticles formed by lanthanide-doped nanostructures and organic ligands have been intensively studied, which could greatly increase their photoluminescence performance as a result of the energy transfer process from organic ligands to Ln³⁺ ions. However, the photoluminescence intensity and excitation spectral width are still quite limited on coordinating with a single type of organic ligand. In this work, Eu³⁺-doped LaF₃ (LaF₃:Eu³⁺) nanoparticles were prepared using a hydrothermal method, and were then hybridized with benzoic acid and thenoyltrifluoroacetone to form the hybrid nanostructures. After that, the hybrid nanostructures were mixed with 2,2′-azobisisobutyronitrile and methyl methacrylate to prepare the composites. The sample obtained by hybridization and composite doping with 5% Eu³⁺ exhibited the best photoluminescence performance. The excitation peak width and luminescence intensity of the hybrid nanostructures were significantly increased. The excitation spectral width of the inorganic–organic mixed hybrid nanostructures was particularly enhanced, and covered the whole ultraviolet band region of solar light on Earth. The prepared composites exhibited good optical properties.     

Influence of thiol capping on the photoluminescence properties of L‐cysteine‐, mercaptoethanol‐ and mercaptopropionic acid‐capped ZnS nanoparticles

Mercaptoethanol (ME), mercaptopropionic acid (MPA) and L‐cysteine (L‐Cys) having ‐SH functional groups were used as surface passivating agents for the wet chemical synthesis of ZnS nanoparticles. The effect of the thiol group on the optical and photoluminescence (PL) properties of ZnS nanoparticles was studied. L‐Cysteine‐capped ZnS nanoparticles showed the highest PL intensity among the studied capping agents, with a PL emission peak at 455 nm. The PL intensity was found to be dependent on the concentration of Zn²⁺ and S^2– precursors. The effect of buffer on the PL intensity of L‐Cys‐capped ZnS nanoparticles was also studied. UV/Vis spectra showed blue shifting of the absorption edge. Copyright © 2015 John Wiley & Sons, Ltd.     

Silver nanoparticles from Prosopis glandulosa and their potential application as biocontrol of Acinetobacter calcoaceticus and Bacillus cereus

In the present study the characterization and properties of silver nanoparticles from Prosopis glandulosa leaf extract (AgNPs) were investigated using UV–Vis spectroscopic techniques, energy dispersive X-ray spectrometers (EDS), zeta potential and dynamic light scattering. The UV–Vis spectroscopic analysis showed the absorbance peaked at 487 nm, which indicated the synthesis of silver nanoparticles. The experimental results showed silver nanoparticles had Z-average diameter of 421 nm with higher stability (?200 mV). The EDS analysis also exhibited presentation of silver element. Additionally, the different concentrations of AgNPs (25, 50, 75 and 100 mg/mL) showed antibacterial activity against Acinetobacter calcoaceticus and Bacillus cereus. Finally, AgNPs from leaf extracts of P. glandulosa may be used as an agent of biocontrol of microorganism of importance medical. However, further studies will be needed to fully understand the antimicrobial activity of silver nanoparticles obtain from P. glandulosa.     

Hyper-Rayleigh scattering of protein-modified gold nanoparticles

The nonlinear optical properties of protein-modified gold nanoparticles has been studied by the hyper-Rayleigh scattering (HRS) technique. HRS signals from the nanoparticles coated with goat-anti-human IgG have been obtained when pumped with a laser pulse with a wavelength of 1064 nm. The HRS signals of gold nanoparticles with IgG were larger than those of bare gold nanoparticles. This can be explained by a noncentrosymmetric effect. It was also found that the HRS signals from the IgG-coated gold nanoparticles could be greatly increased when the antigen was added due to gold nanoparticle aggregation. Our experiment found that the HRS method could produce a measurable signal with 10 microg/ml antigen added, while the colorimetric method using UV spectrum detection required 100 microg/ml of added antigen. The results show that the HRS measurement of immunogold nanoparticles could become a potential immunoassay in determining small levels of antigen in aqueous samples.     

Assembly of light‐emitting diode based on hydrophilic CdTe quantum dots incorporating dehydrated silica gel

Stable photoluminescence QD light‐emitting diodes (QD‐LEDs) were made based on hydrophilic CdTe quantum dots (QDs). A quantum dot‐inorganic nanocomposite (hydrophilic CdTe QDs incorporating dehydrated silica gel) was prepared by two methods (rotary evaporation and freeze drying). Taking advantage of its viscosity, plasticity and transparency, dehydrated silica gel could be coated on the surface of ultraviolet (UV) light LEDs to make photoluminescence QD‐LEDs. This new photoluminescence QD‐LED, which is stable, environmentally non‐toxic, easy to operate and low cost, could expand the applications of hydrophilic CdTe QDs in photoluminescence. Copyright © 2015 John Wiley & Sons, Ltd.     

Photoluminescent properties of novel design heteroleptic Zn(II) complexes

Three novel heteroleptic Zn(II) complexes containing 8‐hydroxy quinoline and various pyrazolone‐based derivatives were synthesized and their structures confirmed by ¹H–nuclear magnetic resonance, mass spectrometry, Fourier transform infra‐red spectroscopy, UV–vis analysis and element analysis. All three complexes showed good photoluminescence properties in the solid state and in solution in the maximum emission range from 475 to 490 nm with a quantum yield of 0.45 to 0.51. Absorption spectra revealed that the complexes possessed a maximum absorption range of 272–281 nm with a band gap of 2.59–2.68 eV. The highest occupied molecular orbital and lowest unoccupied molecular orbital of all the complexes were determine by cyclic voltammetry. All complexes displayed high thermal stability. These characteristics were assessed to find suitability for an alternative cheap light emitter for organic light‐emitting diodes.     

Synthesis of silver nanoparticles employing Polyalthia longifolia leaf extract and their in vitro antifungal activity against phytopathogen

The P. longifolia mediated silver (PL-AgNPs) nanoparticles are very stable and efficient. UV–Vis spectroscopy, dynamic light scattering (DLS), X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), and energy dispersive X-ray spectroscopy (EDX) were used to characterize the produced AgNPs. UV–Vis analysis showed a characteristic peak at 435 nm corresponding to surface plasmon resonance. The synthesis process was spectrophotometrically optimized for various parameters. After optimization, highly stable AgNPs were prepared using 3.0 ml of P. longifolia leaf extract, pH 7.0, 1.0 mM AgNO₃, and 60 °C. The zeta potential was measured by DLS, which showed ?20.8 mV and the PDI value was 5.42. TEM and SEM analysis shows a spherical shape of the synthesized nanoparticles, and the size was measured between 10 and 40 nm. EDX analysis showed intense peaks from silver and oxygen and small peaks from various metal atoms such as Na, P, S and Al indicating their presence in trace amounts. The average size of the PL-AgNPs was 14 nm. The phytochemical analysis shows that the presence of alkaloids, essential oils and saponins seems to be responsible for the synthesis of nanoparticles. PL-AgNPs were further investigated for their antifungal activity against Alternaria alternata. The minimum inhibitory concentration (MIC), minimum fungicidal concentration (MFC) and effect of nanoparticles on cytomorphology of A. alternata have also been reported. Biosynthesized nanoparticles have proven to be inexpensive, environmentally friendly, stable, easily reproducible, and highly effective against plant-pathogenic fungi.