Detection of metronidazole in honey and metronidazole tablets using carbon dots‐based sensor via the inner filter effect

In this work, carbon dots (CDs) with a high quantum yield (22.3%) were easily prepared by hydrothermal pyrolysis of acid fuchsin 6B and hydrogen peroxide at 180°C for 10 h. The resultant CDs possess a narrow size distribution in the range of 2.6 to 3.2 nm and emit blue fluorescence. Interestingly, the absorption band of metronidazole (MTZ) centered at 318 nm can complementary overlap with the excitation band of the as‐prepared CDs centered at 320 nm, resulting in an inner filter effect (IFE) in high efficiency. In fact, the fluorescence quenching of the CDs depends on the concentration of MTZ. Therefore, a simple method for the detection of MTZ can be established using the CDs‐based sensor via the IFE. The linear range of the proposed method was 0–10 μg mL^?1 with the limit of detection as low as 0.257 μg mL^?1. This CDs‐based sensor had been applied for the detection of MTZ in honey and MTZ tablets with the recoveries in the range of 98.0% to 105.1% and 95.7% to 106.5%, respectively. Therefore, the as‐prepared CDs have a potential to be developed as a MTZ sensor with high selectivity, sensitivity and accuracy.     

Simple and sensitive fluorescence sensing of methyl parathion based on the inner filter effect of p-nitrophenol on nitrogen-doped titanium carbide quantum dots

It is of great significance to develop an effective method for methyl parathion (MP) detection. Herein, a novel nitrogen-doped titanium carbide quantum dots (N-Ti₃C₂ QDs) was prepared and used to construct a simple and sensitive fluorescence sensing platform of MP by making use of inner filter effect (IFE). The prepared N-Ti₃C₂ QDs can exhibit strong blue fluorescence at 434 nm. Meanwhile, MP could hydrolyze to produce p-nitrophenol (p-NP) under alkaline conditions, which showed a characteristic ultraviolet-visible (UV-visible) absorption peak at 405 nm, resulting in the fluorescence of N-Ti₃C₂ QDs is effectively quenched by p-NP. In addition, the investigation of time-resolved fluorescence decays indicated that the corresponding quenching mechanism of p-NP on N-Ti₃C₂ QDs is due to the IFE. After optimizing the conditions, the as-developed fluorescence sensing platform displayed wide detection range (0.1–30 μg mL⁻¹) and low detection limit (0.036 μg mL⁻¹) for MP, and it was also successfully applied for MP analysis in real water samples, thus it is expected that this simple, sensitive and enzyme-free sensing platform shows great applications.     

A novel chemiluminescence sensor for the determination of indomethacin based on sulfur and nitrogen co‐doped carbon quantum dot–KMnO4 reaction

We report on a simple and sensitive sulfur and nitrogen co‐doped carbon quantum dot (S,N‐CQD)‐based chemiluminescence (CL) sensor for the determination of indomethacin. S,N‐CQDs were prepared by a hydrothermal method and characterized by fluorescence spectra, Fourier transform infrared spectroscopy and transmission electron microscopy. To obtain the best CL system for determination of indomethacin, the reaction of S,N‐CQDs with some common oxidants was studied. Among the tested systems, the S,N‐CQD–KMnO₄ reaction showed the highest sensitivity for the detection of indomethacin. Under optimum conditions, the calibration plot was linear over a concentration range of 0.1–1.5 mg L^?1, with a limit of detection (3σ) of 65 μg L^?1. The method was applied to the determination of indomethacin in environmental and biological samples with satisfactory results.     

Paper mill sludge-based carbon quantum dots as a specifically ratiometric fluorescent probe for the sensitive and selective detection of coptisine

Coptisine (COP), one of the bioactive components in Rhizoma Coptidis, has many pharmacological effects. Meanwhile, the determination of COP is essential in pharmacological and clinical applications. Herein, we prepared carbon quantum dots (CQDs) by one-step oil-thermal method using paper mill sludge (PMS) as precursor, and developed a ratiometric fluorescence method for the determination of COP. The structural and optical properties of PMS-CQDs were evaluated through high-resolution transmission electron microscopy (HRTEM), Fourier-transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD), ultraviolet-visible (UV-vis), fluorescence, zeta potential and fluorescence lifetime experiments. Fluorescence intensity ratio at 550 nm and 425 nm (I₅₅₀/I₄₂₅) was recorded as an index for quantitative detection of COP. The detection concentration of COP ranges from 0.1 to 50 μM in good linear correlation (R² = 0.9974) with a limit of detection of 0.028 μM (3σ/k). The quenching mechanism was deduced to be inner filter effect and static quenching. The ratiometric fluorescent probe showed impressive selectivity and sensitivity towards COP, and was successfully applied to the detection of COP in human urine with expected recoveries (95.22–111.00%) and relative standard deviations (0.46–2.95%), indicating that our developed method has a great application prospect in actual sample detection.     

Boron and nitrogen co‐doped carbon dots as a sensitive fluorescent probe for the detection of curcumin

In this present study, a fluorescent probe was developed to detect curcumin, which is derived from the rhizomes of the turmeric. We used a simple and economical way to synthesize boron and nitrogen co‐doped carbon dots (BNCDs) by microwave heating. The maximum emission wavelength of the BNCDs was 450 nm at an excitation wavelength of 360 nm. The as‐prepared BNCDs were characterized by multiple analytical techniques such as transmission electron microscopy, X‐ray photoelectron spectroscopy, X‐ray diffraction, and infrared spectroscopy. The synthesized carbon nanoparticles had an average particle diameter of 4.23 nm. The BNCDs exhibited high sensitivity to the detection of curcumin at ambient conditions. The changes of BNCDs fluorescent intensity show a good linear relationship with the curcumin concentrations in the range 0.2–12.5 μM. This proposed method has been successfully applied to detect the curcumin in urine samples with the recoveries of 96.5–105.5%.     

Silicon nanoparticles synthesized using a microwave method and used as a label‐free fluorescent probe for detection of VB12

A simple and rapid detection strategy for vitamin B₁₂ (VB₁₂) was established based on label‐free silicon quantum dots (SiQDs); the detection mechanism was additionally investigated. SiQDs were synthesized using a one‐step microwave method, and their fluorescence was stronger than that synthesized using the hydrothermal method. SiQDs fluorescence was quenched using VB₁₂ due to the inner filter effect (IFE), which was demonstrated using ultraviolet (UV) absorption spectra, fluorescence lifetime, transmission electron microscopy and zeta potential analysis. Subsequently, quercetin (Que) and doxorubicin (Dox) with absorption peaks that overlapped the excitation or emission peaks of SiQDs respectively were used as control groups to investigate the quenching mechanism. Results showed that quenching efficiency was related to the level of overlap between the adsorption peak of the quencher and the excitation or emission peaks of SiQDs. A greater level of overlap caused a higher quenching efficiency. Therefore, the sensitive quenching of VB₁₂ for SiQDs was due to the synergistic effect of the synchronous overlap between the absorption peak of VB₁₂ with the excitation and emission peaks of SiQDs. Fluorescence quenching efficiency increased linearly in the 0.5 to 16.0 μmol·L^?1 VB₁₂ concentration range, and the detection limit was 158 nmol·L^?1. In addition, SiQDs were applied to determine VB₁₂ in tablets and human urine samples with satisfactory recoveries ranging from 97.7 to 101.1%.     

Highly fluorescent nitrogen-doped carbon quantum dots prepared using sucrose and urea: Green synthesis,characterization, and use for determination of torsemide in its tablets and plasma samples

A simple and facile microwave-assisted method was developed for the synthesis of highly fluorescent nitrogen-doped carbon quantum dots (N-CQDs) using sucrose and urea. The produced quantum dots exhibited a strong emission band at 376 nm after excitation at 216 nm with quantum yield of 0.57. The as-prepared N-CQDs were characterized using Fourier-transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM) images, and ultraviolet-visible (UV-visible) spectra. The average particle size was 7.7 nm. It was found that torsemide (TRS) caused an obvious quenching of the fluorescent N-CQDs; so, they were used for its spectrofluorometric estimation. An excellent linear correlation was found between the fluorescence quenching of N-CQDs and the concentration of the drug in the range of 0.10 to 1.0 μg/mL with limit of quantitation (LOQ) of 0.08 μg/mL and limit of detection (LOD) of 0.027 μg/mL. The method was successfully applied for the assay of the drug in its commercial tablets and spiked human plasma samples, and the results obtained were satisfactory. Complex GAPI was used for greenness assessment of the analytical procedures and the pre-analysis steps. Interference likely to be introduced from co-administered drugs was also studied.     

A novel optical probe based on d‐penicillamine‐functionalized graphene quantum dots: Preparation and application as signal amplification element to minoring of ions in human biofluid

In this study, d ‐penicillamine‐functionalized graphene quantum dots (DPA‐GQD) has been synthesized, which significantly increases the fluorescence intensity of GQD. We used this simple fluorescent probe for metal ions detection in human plasma samples. Designed DPA‐GQD respond to Hg²⁺, Cu²⁺, Au²⁺, Ag⁺, Co²⁺, Zn²⁺, and Pb²⁺ with high sensitivity. The fluorescence intensity of this probe decreased significantly in the presence of metal ions such as, Hg²⁺, Cu²⁺, Au²⁺, Ag⁺, Co²⁺, Zn²⁺, and Pb²⁺. In this work, a promising probe for ions monitoring was introduced. Moreover, DPA‐GQD probe has been tested in plasma samples. The functionalized DPA‐GQDs exhibits great promise as an alternative to previous fluorescent probes for bio‐labeling, sensing, and other biomedical applications in aqueous solution.     

Highly luminescent S,N co‐doped carbon quantum dots‐sensitized chemiluminescence on luminol–H2O2 system for the determination of ranitidine

S,N co‐doped carbon quantum dots (N,S‐CQDs) with super high quantum yield (79%) were prepared by the hydrothermal method and characterized by transmission electron microscopy, photoluminescence, UV–Vis spectroscopy and Fourier transformed infrared spectroscopy. N,S‐CQDs can enhance the chemiluminescence intensity of a luminol–H₂O₂ system. The possible mechanism of the luminol–H₂O₂–(N,S‐CQDs) was illustrated by using chemiluminescence, photoluminescence and ultraviolet analysis. Ranitidine can quench the chemiluminescence intensity of a luminol–H₂O₂–N,S‐CQDs system. So, a novel flow‐injection chemiluminescence method was designed to determine ranitidine within a linear range of 0.5–50 μg ml^?1 and a detection limit of 0.12 μg ml^?1. The method shows promising application prospects.