Optical analysis of RE3+ (RE = Eu,Tb):MgLa2V2O9 nano-phosphors

Red and green rare-earth ion (RE³⁺) (RE = Eu, Tb):MgLa₂V₂O₉ micro-powder phosphors were produced utilizing a standard solid-state chemical process. The X-ray diffraction examination performed on the phosphors showed that they were crystalline and had a monoclinic structure. The particles grouped together, as shown in the scanning electron microscopy (SEM) images. Powder phosphors were examined using a variety of spectroscopic techniques, including photoluminescence (PL), Fourier-transform infrared, and energy dispersive X-ray spectroscopy. Brilliant red emission at 615 nm (⁵D₀ → ⁷F₂) having an excitation wavelength (λ_exci) of 396 nm (⁷F₀ → ⁵L₆) and green emission at 545 nm (⁵D₄ → ⁷F₅) having an λ_exci = 316 nm (⁵D₄ → ⁷F₂) have both been seen in the emission spectra of Tb³⁺:MgLa₂V₂O₉ nano-phosphors. The emission mechanism that is raised in Eu³⁺:MgLa₂V₂O₉ and Tb³⁺:MgLa₂V₂O₉ powder phosphors has been explained in an energy level diagram.     

Resonance Raman studies of the peroxotitanate(IV) complexes K2(Ti(O2)(SO4)2)·5H2O and K2(Ti(O2)(C2O4)2)·3H2O

The resonance Raman spectra of K₂(Ti(O₂)(SO₄)₂)·5H₂O and K₂(Ti(O₂)(C₂O₄)₂)·3H₂O are recorded. The results are consistent with the triangular structure of the peroxotitanium unit, Ti(O₂), with C_2ν symmetry. The ν(OO), ν_s(TiO) and ν_as(TiO) are observed around 890, 610 and 535 cm⁻¹, respectively. The resonance effects are shown to be associated with the 425 nm absorption band. This band is assigned to the O₂²⁻ → Ti(IV) charge-transfer transition. The calculated force constant values for the O₂²⁻ and TiO bonds are 320 and 275 N m⁻¹, respectively.     

Unravelling the interface of Co–Pi/Ag/Fe2O3 and Ni–Pi/Ag/Fe2O3 heterostructures for enhanced solar water splitting

Recently, a new type of haematite-based (a-Fe₂O₃) photoanode has achieved a considerable catalytic performance through simply depositing Ag and cobalt phosphate (Co–Pi) nanoparticles (NPs) onto haematite nanosheets. However, there is no detailed mechanism study on the reason for high-performance catalysis. In view of this, we conduct first-principles calculations and our results indicate that there is a further accumulation of positive charge on Ag NPs on the heterogeneous interfaces with the addition of Co–Pi NPs than that of haematite modified only by Ag NPs. Also, there is a slight increase of the adsorption energy of water molecules.     

Initiation and Inhibition of Free Radical Processes in H2O2–Metmyoglobin (Methemoglobin)–2,2"-Azino-bis-(3-Ethylbenzthiazoline-6-Sulfonic Acid) Systems

Rates of free radical initiation were determined at 20°C in 10 mM phosphate buffer (pH 7.4) in the systems metmyoglobin (methemoglobin)–H₂O₂ using 2,2"-azino-bis-(3-ethylbenzthiazoline-6-sulfonic acid) as the diammonium salt (ABTS). The catalytic activity of MetMb was 2-3-fold higher than that of MetHb. The process can be described by the Michaelis–Menten equation, from which effective values of K _m and V _max were calculated. Comparative kinetic studies on the inhibition of ABTS oxidation were carried out using Trolox, propylgallate (PG), polydisulfide of gallic acid (poly(DSG)), polydisulfide of (2-amino-4-nitrophenol) (poly(ADSNP)), and its conjugate with human serum albumin (HSA–poly(ADSNP)). The inhibitors were characterized by inhibition constants K _i and stoichiometric inhibition coefficients f (the number of radicals terminated by a single molecule of inhibitor). The minimum K _i and the maximum f values were obtained for poly(DSG), and in the system of MetHb–H₂O₂–ABTS they were 0.08 M and 27.5, respectively. According to their antiradical activities, the inhibitors can be arranged as follows: poly(DSG) > poly(ADSNP) > PG > Trolox. PG, poly(DSG), poly(ADSNP), and its conjugate with HSA are suggested as calibrators, i.e., inhibition standards for evaluation of antioxidant status of biological fluids in possible test systems based on the free radical-generating pair MetMb–H₂O₂ with ABTS as the acceptor of the active radicals.     

FeS2 nanosheets–H2O2–NaHCO3 chemiluminescence method for procaine hydrochloride determination

FeS₂ nanosheets (NSs) were produced and exploited as a new catalyst for a chemiluminescence (CL) reaction. The characterization of FeS₂ NSs was performed using spectroscopic methods. In this regard, transmission electron microscopy images showed that FeS₂ NSs have a length of ~0.5–1 μm. The direct optical band gap energy of FeS₂ NSs was found to be 3.45 eV. Prepared FeS₂ NSs were used to catalyze the NaHCO₃–H₂O₂ CL reaction. It was found that procaine hydrochloride (PCH) could reduce the intensity of the FeS₂ NSs–NaHCO₃–H₂O₂ CL reaction so, with increasing PCH concentrations, the intensity of light emission decreased. Therefore, a simple and sensitive method was introduced to measure PCH with a linear range expanded from 1.00 × 10⁻⁶ to 1.00 × 10⁻³ mol L⁻¹ and an 8.32 × 10⁻⁷ mol L⁻¹ limit of detection. Studies related to the effect of foreign species and reaction mechanisms were performed. The application of the approach was verified by quantifying the PCH in the injection.     

Catalytic effect of (H2O)n (n = 1–3) clusters on the reaction of HNO2 + HO → H2O + NO2 under tropospheric conditions

ABSTRACT

The effect of (H₂O)_n (n?=?1–3) on the HNO₂?+?HO → H₂O?+?NO₂ reaction has been investigated theoretically at the CCSD(T)/CBS//B3LYP/6-311?+?G(3df,2pd) level of theory, coupled with rate constant calculations by using variational transition state theory. Our results show that, when (H₂O)_n (n?=?1–3) was introduced into HNO₂?+?HO → H₂O?+?NO₂ reaction, the product of the reaction did not change, but the potential energy surface became quite complex, yielding two kinds of reactions, namely HNO₂···(H₂O)_n (n?=?1–3)?+?HO and HO···(H₂O)_n (n?=?1–3)?+?HNO₂. In all catalysed reactions with (H₂O)_n (n?=?1–3), the former reaction type is favourable than the latter one with its effective rate constant respectively larger by 6–1 orders of magnitude than that of latter one. Within the temperature range of 240–320?K, the relative impacts on water monomer are much more obvious than dimer and trimer. However, the effective rate constant with water is larger by 658%–17% times of magnitude, showing that the positive water effect is obvious under atmospheric conditions.     

Thiotungstates containing the syn-[W2(O/S)2(μ-S)2] (E = O, S) and cuboidal [W2Cu2(μ3-S)4] cores

Reaction of [W^VIS₄]²⁻ with ethane-1,2-dithiol edtH₂ in the presence of the sulfide scavenger Cd²⁺ yielded the dinuclear tungstate syn-[{(edt)W^V(O/S)}₂(μ-S)₂]²⁻ (1), with the terminal S/O disordered over the two tungsten sites in the ratio 0.8:02. In the presence of thiocyanate, phosphine and CuI, the anionic cuboidal clusters of composition [{(SCN)₃W^V}₂{Cu^I(PPh₃)}₂(μ₃-S)₄]²⁻ (2) and (3, diphos = 1,2-bis(o-diphenylphosphinophenyl)ethane), and possibly via an intermediate [{(SCN)₃W^VS}₂(μ-S)₂]⁴⁻. The crystal and molecular structures of [Et₄N]₂1, [Et₄N]₂2 · H₂O and [Et₄N]₂3 · H₂O have been determined.     

Synthesis of 2-(p-trifluoroacetamidophenyl)ethylO-α-l-fucopyranosyl-(1–3)-O-(2-acetamido-2-deoxy-β-d-glucopyranosyl) (1–3)-O-β-d-galactopyranosyl-(1–4)-β-d-glucopyranoside,a tetrasaccharide fragment of a tumour-associated glycosphingolipid

The tetrasaccharide 2-(p-trifluoroacetamidophenyl)ethylO-α-l-fucopyranosyl-(1–3)-O-(2-acetamido-2-deoxy-β-d-glucopyranosyl)-(1–3)-O-β-d-galactopyranosyl-(1–4)-β-d-glucopyranoside was synthesized from thioglycoside intermediates. The key step was a methyl triflate promoted glycosidation of a lactose-derived 3′,4′-diol with a disaccharide thioglycoside to give a β(1–3)-linked tetrasaccharide derivative in 67% yield.     

Crystal structures of three thiourea (tu) complexes of Pt(II): trans-[(tu)2Pt(NH3)2]Cl2, trans-[(tu)2Pt(CH3NH2)2]Cl2·3H2O and [Pt(tu)4]Cl2

The structures of three Pt(II) thiourea complexes, trans-[(tu)₂Pt(NH₃)₂]Cl₂ (1), trans-[(tu)₂Pt(CH₃NH₂)₂]Cl₂·3H₂O (2) and [Pt(tu)₄]Cl₂ (3), have been determined by X-ray diffraction and refined to R = 0.049 for 1026 reflections (1), R = 0.057 for 2547 reflections (2) and R = 0.046 for 2792 reflections (3). All the compounds crystallize in the space group P2₁/c and have cell dimensions: a = 5.437(1), b = 6.450(1), c = 17.980(3) Å, β = 96.05(2)°, Z = 2 (compound 1); a = 9.225(1), b = 15.404(2), c = 12.601(2) Å, β = 105.39(2)°, Z = 4 (compound 2); and a = 9.051(6), b = 10.203(6), c = 18.263(8) Å, β = 91.12(8)°, Z = 4 (compound 3). The unit cell of 1 and 3 contains only a single type of cation, while that of 2 is formed from two independent cations. In 1 and 2 the coordination spheres of the Pt atoms are rather similar, with angles close to 90° and coplanarity of the metal and respective donor atoms. Instead, in 3 the four sulfur atoms, which surround the Pt, display a slight distortion (0.06 Å from the mean plane) towards tetrahedral.     

The structure and properties of tetrakis(tironato)cerate(IV), Na12[Ce(C6H2O2(SO3)2)4]·9H2O·6C3H7NO

The title complex, prepared in 1 M NaOH, was crystallized from hot N,N-dimethylformamide/ ethanol solutions to give Na₁₂[Ce(C₆H₂O₂(SO₃)₂)₄]· 9H₂O·6DMF. The purple—brown crystals were examined by X-ray diffraction while inside quartz capillaries filled with DMF, (λ_max 425 nm, ϵ 3664; λ_sh 520 nm, ϵ 2240) and belong to space group Pbca, Z=8 with a=21.846(4), b=17.348(2), c=43.103- (6) Å, V=16.335(7) ų, D_c=1.693 gcm^t−3, D_o=1.725 g cm^t−3. Diffractometer data were collected using Mo Kα radiation to 2θ=43^o. For 7331 independent data with F_o²>3σ(F_o²) full matrix least squares refinement converged to unweighted and weighted R factors of 0.072 and 0.110, respectively, with a mixture of anisotropic and isotropic thermal parameters. The disordered DMF atom parameters were not refined. The structure consists of discrete monomeric Ce(C₆H₂S₂O₈)₄¹²⁻ units with 12 Na⁺ counter cations and 10 H₂O molecules (two with half occupancy), and 6 DMF molecules of solvation filling up spaces between cations and anions. Cerium(IV) is in a general position with a coordination polyhedron close to the trigonal-faced dodecahedron, D_2d, with the angles between the two BAAB trapezoids of 2.3^o and 3.7^o. The average CeO(A) distance, 2.363(9) Å is longer than the average CeO(B) distance, 2.326(15)Å, with the reverse being true for one of the four tironato ligands. The average ring OCeO angle is 67.9(1)^o. The cerium (IV) complex is found by cyclic voltammetry to undergo a quasi-reversible one-electron reduction (in strongly basic solution with excess tiron) with Ef=−497 mV vs. SCE, hence the ratio of the formation constants for tetrakis(tironato)cerate(IV) to that for tetrakis(tironato)cerate(III), K_IV/K_III, is 10³³. Characterization of other tiron salts is reported.     

ACE2/Ang-(1–7) signaling and vascular remodeling

The renin-angiotensin system (RAS) regulates vascular tone and plays a critical role in vascular remodeling, which is the result of a complex interplay of alterations in vascular tone and structure. Inhibition of the RAS has led to important pharmacological tools to prevent and treat vascular diseases such as hypertension, diabetic vasculopathy and atherosclerosis. Angiotensin converting enzyme 2 (ACE2) was recently identified as a multifunctional monocarboxypeptidase responsible for the conversion of angiotensin (Ang) II to Ang-(1–7). The ACE2/Ang-(1–7) signaling has been shown to prevent cellular proliferation, pathological hypertrophy, oxidative stress and vascular fibrosis. Thus, the ACE2/Ang-(1–7) signaling is deemed to be beneficial to the cardiovascular system as a negative regulator of the RAS. The addition of the ACE2/Ang-(1–7) signaling to the complexities of the RAS may lead to the development of novel therapeutics for the treatment of hypertension and other vascular diseases. The present review considers recent findings regarding the ACE2/Ang-(1–7) signaling and focuses on its regulatory roles in processes related to proliferation, inflammation, vascular fibrosis and remodeling, providing proof of principle for the potential use of ACE2 as a novel therapy for vascular disorders related to vascular remodeling.     

Microsolvation and hydration enthalpies of CaC2O4(H2O) n (n = 0-16) and C2O4 2-(H2O) n (n = 0-14): an ab initio study

We studied hydrated calcium oxalate and its ions at the restricted Hartree–Fock RHF/6-31G* level of theory. Performing a configurational search seems to improve the fit of the HF/6-31G* level to experimental data. The first solvation shell of calcium oxalate contains 13 water molecules, while the first solvation shell of oxalate ion is formed by 14 water molecules. The first solvation shell of Ca(II) is formed by six water molecules, while the second shell contains five. At 298.15 K, we estimate the asymptotic limits (infinite dilution) of the total standard enthalpies of hydration for Ca(II), oxalate ion and calcium oxalate as ?480.78, –302.78 and –312.73 kcal mol^?1, resp. The dissociation of hydrated calcium oxalate is an endothermic process with an asymptotic limit of +470.84 kcal mol^?1.