Green synthesis of fluorescent carbon dots using chloroplast dispersions as precursors and application for Fe3+ ion sensing

Water‐soluble carbon dots (CDs) were synthesized using a one‐step hydrothermal treatment of chloroplast dispersions extracted from fresh leaves as a green carbon source. The CD solution showed an emission peak centred at 445 nm when excited at 300 nm. The synthesized CDs were uniform and monodispersed with an average size of 5.6 nm. When adding ferric(III) ions (Fe³⁺) to the solution of the original CDs, the fluorescence intensity decreased significantly. Based on the linear relationship between fluorescence intensity and concentration of Fe³⁺ ions, an effective method for rapid, sensitive and selective Fe³⁺ sensing in aqueous solution could be established. Under optimum conditions, the extent of the fluorescence quenching of prepared CDs strongly depended on the Fe³⁺ ions over a wide concentration range 1.0–100.0 μM with a detection limit (3σ/k) of 0.3 μM. Furthermore, the quantitative determination of Fe³⁺ ions in environmental water samples was realized.     

Ratiometric optical detection of pyrophosphate based on aggregation-caused dual-signal response of gold nanoclusters

Sensing of pyrophosphate ion (PPi) has received much attention due to the strong demand for clinical diagnostics. Here, based on gold nanoclusters (Au NCs), a ratiometric optical detection method for PPi is developed by simultaneously detecting the dual signals of fluorescence (FL) and second-order scattering (SOS). The PPi is detected by inhibiting the formation of aggregates of Fe³⁺ with Au NCs. Binding of Fe³⁺ to Au NCs causes aggregation of Au NCs, which leads to fluorescence quenching and scattering increasing. The presence of PPi can competitively bind Fe³⁺ to re-disperse the Au NCs and finally recover the fluorescence and reduce the scattering signal. The designed PPi sensor shows a high sensitivity with a linear range 5–50 μM and a detection limit of 1.2 μM. In addition, the assay has excellent selectivity for PPi, which makes its application in real biological samples extremely valuable.     

Bovine serum albumin functionalized blue emitting Ti3C2 MXene quantum dots as a sensitive fluorescence probe for Fe3+ ion detection and its toxicity analysis

In the present work, an improved class of protein functionalized fluorescent 2D Ti₃C₂ MXene quantum dots (MXene QDs) was prepared using a hydrothermal method. Exfoliated 2D Ti₃C₂ sheets were used as the starting precursor and transport protein bovine serum albumin (BSA) was used to functionalize the MXene QDs. BSA-functionalized MXene QDs exhibited excellent photophysical property and stability at various physiological parameters. High-resolution transmission electron microscopy analysis showed that the BSA@MXene QDs were quasispherical in shape with a size of ~2 nm. The fluorescence intensity of BSA@MXene QDs was selectively quenched in the presence of Fe³⁺ ions. The mechanism of fluorescence quenching was further substantiated using time-resolved fluorescence and Stern–Volmer analysis. The sensing assay showed a linear response within the concentration range 0–150 μM of Fe³⁺ ions with excellent limit of detection. BSA@MXene QDs probe showed good selectivity toward ferric ions even in the presence of other potential interferences. The practical applicability of BSA@MXene QDs was further tested in real samples for Fe³⁺ ion quantification and the sensor had good recovery rates. The cytotoxicity studies of the BSA@MXene QDs toward the human glioblastoma cells revealed that BSA@MXene QDs are biocompatible at lower doses and showed significant cytotoxicity at higher dosages.     

A colorimetric fluorescent probe for rapid and specific detection of nitrite

The method of fluorescent probes has been an important technique for detection of nitrite (NO₂^?). As an important inorganic salt, excessive nitrite would threaten humans and the environment. In this paper, a colorimetric fluorescent probe P‐N (1,2‐diaminoanthraquinone) with rapid response and high selectivity, which could detect NO₂^? by visual colour changes and fluorescence spectroscopy is presented. The probe P‐N solution (pH 1) changed from pink to colourless with the addition of NO₂^? and fluorescence intensity at 639 nm clearly decreased. Good linear exists between fluorescence intensities and NO₂^? concentrations for the range 0–16 μM, and the detection limit was 54 nM (based on a 3σ/slope). Moreover, probe P‐N could also detect NO₂^? in real water samples, and results were all satisfactory. Probe P‐N shows great practical application value for detecting NO₂^? in the environment.     

An ‘on–off–on’ fluorescent switch based on a luminous covalent organic framework for the rapid and selective detection of glyphosate

Glyphosate, the most used herbicide in the world, has a residue problem that cannot be ignored. However, glyphosate itself does not have fluorescence emission and lacks the conditions for fluorescence detection. In this work, a rapid and selective fluorescence detection method of glyphosate was designed by an ‘on–off–on’ fluorescent switch based on a luminous covalent organic framework (L-COF). Only the fixed concentration of Fe³⁺ as an intermediate could trigger the fluorescent switch and no incubation step was required. The proposed method showed good accuracy with a correlation coefficient of 0.9978. The method's limits of detection and quantitation were 0.88 and 2.93 μmol/L, which were lower than the maximum allowable residue limits in some regulations. Environmental water samples and tomatoes were selected as actual samples to verify the application in a complex matrix. A satisfactory mean recovery from 87% to 106% was gained. Furthermore, Fe³⁺ could induce fluorescence quenching of L-COF through the photo-induced electron transfer (PET) effect, while the addition of glyphosate could block the PET effect to achieve detection. These results demonstrated the proposed method had abilities to detect glyphosate and broaden the application of L-COF.     

A carbonothioate‐based highly selective fluorescent probe with a large Stokes shift for detection of Hg2+

Mercury (Hg) is one of the heavy metal pollutants in the environment. Even a very small amount of mercury can cause serious harm to human beings. Herein, we reported a new carbonothioate‐based fluorescent probe for the detection of Hg²⁺ without interference from other metal ions. This probe possessed a very large Stokes shift (192 nm), which could improve the detection sensitivity by minimizing the interferences resulted from self‐absorption or auto‐fluorescence. With the addition of Hg²⁺ to the probe solution, considerable fluorescence enhancement was observed. Additionally, the Hg²⁺ concentration of 0–16 μM and fluorescence intensity showed a good linear relationship (y = 22106× + 53108, R² = 0.9955). Finally, the proposed probe was used to detect Hg²⁺ in real water samples, and its result was satisfactory. Therefore, our proposed probe would provide a promising method for the determination of Hg²⁺ in the environment.     

On–off Bodipy chemosensor for recognition of iron(III) ion based on the inner filter effect and its applications in cellular and bacterial imaging

One strong fluorescent Bodipy‐containing derivative was synthesized and characterized using ¹H NMR, electrospray ionization mass spectrometry and elemental analysis. Its electrochemical and photophysical properties were investigated. In addition, the Bodipy derivative could be used as an on–off fluorescent probe for the detection of Fe³⁺ ions based on the inner filter effect because the absorption band of the Fe³⁺ ion overlaps the excitation band of Bodipy very well upon irradiation with UV light. Furthermore, the Bodipy‐based sensor has obvious advantages including simplicity, rapid response, high selectivity, sensitivity and a detection limit of 1.2 μmol/L, and has been demonstrated in real water samples including tap water, mineral water and water from Lake Tai. Moreover, the fluorescent probe could also be used as a probe for the determination of Fe³⁺ in cellular and bacterial imaging. Copyright © 2016 John Wiley & Sons, Ltd.     

Chemiluminescence method based on the KIO4−K2CO3−Mn2+ reaction for rapid and sensitive determination of forchlorfenuron in dried fruit

Forchlorfenuron is a low-toxic phenylurea plant growth regulator. Excessive intake of forchlorfenuron can lead to metabolic disorders of the matrix and be harmful to human health. The chemiluminescence intensity of the KIO₄–K₂CO₃–Mn²⁺ reaction decreased in the presence of forchlorfenuron. Based on this result, a rapid and sensitive chemiluminescence method was established to determine forchlorfenuron by combining it with a batch injection static device. The injection speed, injection volume and reagent concentration of the forchlorfenuron–KIO₄–K₂CO₃–Mn²⁺ chemiluminescence reaction were optimized. Under these optimized conditions, the linear range of the method was 1.0–200.0 μg/L, and the limit of detection was 0.29 μg/L (S/N = 3). The chemiluminescence method for the determination of forchlorfenuron could be completed in 10 s. The method was applied to detect the residual forchlorfenuron in dried fruit samples, and the results are consistent with high-performance liquid chromatography-mass spectrometry. This method has the advantages of high sensitivity, rapid response, less reagent consumption, and convenient operation. It will provide a new perspective for chemiluminescence for the rapid and sensitive determination of forchlorfenuron in various complex samples.     

Clofibric acid or diethylmaleate supplemented diet decrease blood pressure in DOCA-salt treated male Sprague-Dawley rats - relation with liver antioxidant status

The effects of ascorbate and a-tocopherol as antioxidants and as co-operative factors against NADPH-dependent lipid peroxidation in human placental mitochondria have been studied. The addition of ascorbate at low concentration (up to 50 M) to the NADPH-generating system resulted in increasing lipid peroxidation and Fe³⁺ to Fe²⁺ reduction. High concentration of ascorbate (150 M), which produced maximal rate of ascorbate-dependent lipid peroxidation, was found to inhibit almost completely NADPH-dependent lipid peroxidation by maintaining too much iron in its reduced form. Either stimulatory or inhibitory effect of ascorbate on NADPH-dependent lipid peroxidation depends on the appropriate Fe³⁺/Fe²⁺ ratio. -Tocopherol caused a decrease of NADPH-dependent lipid peroxidation, inhibiting completely this process at 150 M concentration. The inhibitory effect of -tocopherol increased rapidly with the increasing ascorbate concentration, almost complete inhibition of NADPH-dependent lipid peroxidation being obtained at 25 M -tocopherol and 50 M ascorbate. This strong inhibitory combined effect of -tocopherol and ascorbate was independent of the Fe³⁺/Fe²⁺ ratio, as a-tocopherol is not able to reduce Fe³⁺ to Fe²⁺ under the conditions employed. These findings suggest that antioxidant effects of ascorbate in placental mitochondria are mediated by recycling of a-tocopherol rather than by strong reduction of Fe³⁺ to Fe²⁺. On the basis of the results obtained, we assume that adequate concentrations of a-tocopherol and ascorbate in placental tissue may prevent the release of lipid peroxide from placental mitochondria and therefore could be protective against the development of preeclampsia.     

Eriodictyol regulated ferroptosis,mitochondrial dysfunction,and cell viability via Nrf2/HO-1/NQO1 signaling pathway in ovarian cancer cells

This study aimed to investigate the antitumor effect and the underlying molecular mechanism of eriodictyol on ovarian cancer cells. CaoV3 and A2780 were exposed to eriodictyol at different concentrations of 0−800 μM. Cell apoptosis and viability were determined by TdT-mediated dUTP Nick-End Labeling (TUNEL) assay and Cell Counting Kit-8 (CCK-8) assay, respectively. Mitochondrial membrane potential was evaluated by flow cytometers with a JC-1 detection kit. Fe²⁺ content was evaluated using an iron assay kit. The section of tumor tissues was observed using hematoxylin-eosin (H&E) staining and nuclear factor erythroid 2-related factor 2 (Nrf2) expression was detected by immunohistochemistry (IHC) staining. Eriodictyol suppressed cell viability and induced cell apoptosis of CaoV3 and A2780 cells. Half maximal inhibitory concentration (IC₅₀) value of CaoV3 at 24 and 48 h was (229.74 ± 5.13) μM and (38.44 ± 4.68) μM, and IC₅₀ value of A2780 at 24 and 48 h was (248.32 ± 2.54) μM and (64.28 ± 3.19) μM. Fe²⁺ content and reactive oxygen species production were increased and protein levels of SLC7A11 and GPX4 were decreased by eriodictyol. Besides, eriodictyol reduced the ratio of JC-1 fluorescence ratio, glutathione and malondialdehyde contents but elevated Cytochrome C level. Nrf2 phosphorylation were obviously downregulated by eriodictyol. Finally, eriodictyol suppressed tumor growth, aggravated mitochondrial dysfunction and downregulated Nrf2 expression in tumor tissue in mice. Eriodictyol regulated ferroptosis, mitochondrial dysfunction and cell viability via Nrf2/HO-1/NQO1 signaling pathway in ovarian cancer.     

Spectrofluorimetric determination of folic acid in tablets and urine samples using 1,10‐phenanthroline‐terbium probe

A new spectrofluorimetric method was reported for the determination of folic acid (FA), based on its quenching effect on the fluorescence intensity of Tb³⁺–1,10‐phenanthroline complex as a fluorescent probe. The quenched fluorescence intensity at an emission wavelength of 545 nm was proportional to the concentration of FA in Tris–HCl buffer solution of pH 6.2. The effects of pH, time, order of addition of reagents, temperature and concentrations of Tb³⁺, buffer and 1,10‐phenanthroline were investigated and optimized. The linear range for the determination of FA was 0.01–1.1 mg/L. The detection limit was 0.003 mg/L and the relative standard deviation for replicated determination of 1 mg/L of folic acid was 1.2%. This method was simple, practical and relatively free from interference effects. It was successfully applied to assess FA in pharmaceutical tablets and urine samples. Copyright © 2010 John Wiley & Sons, Ltd.     

Spin concentration measurements of high-spin (g′ = 4.3) rhombic iron(III) ions in biological samples: theory and application

Electron paramagnetic resonance (EPR) signals at g′ = 4.3 are commonly encountered in biological samples owing to mononuclear high-spin (S = 5/2) Fe³⁺ ions in sites of low symmetry. The present study was undertaken to develop the experimental method and a suitable g′ = 4.3 intensity standard and for accurately quantifying the amount of Fe³⁺ responsible for such signals. By following the work of Aasa and Vänngård (J. Magn. Reson. 19:308–315, 1975), we present equations relating the EPR intensity of S = 5/2 ions to the intensities of S = 1/2 standards more commonly employed in EPR spectrometry. Of the chelates tested, Fe³⁺–EDTA (1:3 ratio) in 1:3 glycerol/water (v/v), pH 2, was found to be an excellent standard for frozen-solution S = 5/2 samples at 77 K. The spin concentrations of Cu²⁺–EDTA and aqua VO²⁺, both S = 1/2 ions, and of Fe³⁺–transferrin, an S = 5/2 ion, were measured against this standard and found to agree within 2.2% of their known metal ion concentrations. Relative standard deviations of ±3.6, ±5.3 and ±2.9% in spin concentration were obtained for the three samples, respectively. The spin concentration determined for Fe³⁺–desferrioxamine of known Fe³⁺ concentration was anomalously low suggesting the presence of EPR-silent multimeric iron species in solution.     

A new quaternary photoluminescence enhancement system of Eu−N‐(o‐vanillin)‐1,8‐diaminonaphthalene−1,10‐phenanthroline−Zn and its application in determining trace amounts of europium and zinc

A new sensitive quaternary photoluminescence enhancement system has been successfully developed to determine trace amounts of Eu³⁺ and Zn²⁺. The photoluminescence intensity of Eu ? N‐(o‐vanilin)‐1,8‐diaminonaphthalene systems was greatly increased by the addition of specific concentrations of 1, 10‐phenanthroline and Zn²⁺. The excitation and emission wavelengths were 274 and 617 nm, respectively. Under optimal system conditions, the photoluminescence intensity showed a linear response toward Eu³⁺ in the range of 5.0 × 10^–6 ~ 2.0 × 10^–5 M with a limit of detection (= 2.2 × 10^–9 M) and the photoluminescence intensity of the system decreased linearly by increasing the Zn²⁺ concentration in the range of 5.0 × 10^–8 ~ 1.0 × 10^–6 M with a limit of detection (= 8.8 × 10^–11 M). This system was successfully applied for the determination of trace amounts of Eu³⁺ in a high purity La₂O₃ matrix and in the synthetic rare earth oxide mixture, and of Zn²⁺ in a high purity Mg(NO₃)₂ · 6H₂O matrix and in synthetic coexisting ionic matrixes. The energy transfer mechanism, photoluminescence enhancement of the system and interference of other lanthanide ions and common coexisting ions were also studied in detail. Copyright © 2013 John Wiley & Sons, Ltd.     

Fe2+ uptake by mouse intestinal mucosa in vivo and by isolated intestinal brush-border membrane vesicles

In vivo kinetics of mucosal uptake of luminal ⁵⁹Fe²⁺ by tied segments of normal mouse duodenum are characterised by a K_m of approx. 100 μM and a V_max of approx. 9 pmol/min per mg wet weight of intestine. These values were determined at pH 7.25 in the presence of excess sodium ascorbate. Studies with luminal Fe²⁺ concentrations of 100 μM reveal: (1) uptake is relatively independent of ascorbate: Fe ratio and luminal pH and (2) uptake is potently inhibited by 1 mM Co²⁺ or Mn²⁺ and large luminal NaCl concentrations but not by Ca²⁺. 3 days of hypoxia (0.5 atmospheres) yields no significant increase in subsequent total mucosal uptake by in vivo tied segments while uptake is significantly reduced by semi-starvation. Quantitative comparison of in vivo mucosal uptake with subsequent determination of isolated brush-border membrane ⁵⁹Fe²⁺ transport in individual mice reveals a positive correlation (P < 0.01) between the two parameters. These results, in conjunction with studies of isolated mouse duodenal brush-border membrane (Simpson, R.J. and Peters, T.J. (1985) Biochim. Biophys. Acta, 814, 381–388 and (1986) Biochim. Biophys. Acta 856, 109–114) suggest that the Fe²⁺ transport properties of isolated brush-border membrane are quantitatively adequate to explain in vivo mucosal uptake in normal and hypoxic mice at Fe²⁺ concentrations up to 100 μM.     

Effects of cryopreservation on the intracellular calcium concentration of human spermatozoa and its response to progesterone

The intracellular free calcium concentration [Ca²⁺]_i of sperm from 23 ejaculates was measured before and after cryopreservation using the fluorescent probe Fura-2. Spermatozoa were treated with 3.18 μM progesterone so that the regulation of [Ca²⁺]_i in a dynamic situation could be studied. [Ca²⁺]_i (nM) was 290 ± 13 in fresh spermatozoa vs. 550 ± 26 in cryopreserved samples (mean ± S.E.M. P < 0.0001 paired t-test). Progesterone at a dose of 3.18 μM stimulated a large and rapid increase in [Ca²⁺]_i to a peak value > 1 μM after 10–20 seconds. [Ca²⁺]_i then declined to a slightly raised basal level over the next 30–40 seconds. This phenomenon occurred in all the fresh samples, but about half the frozen thawed samples failed to respond. The peak [Ca²⁺] attained by frozen samples which did respond after the addition of progesterone was similar to that observed with fresh sperm. The calcium channel blocker verapamil (200 μM) completely inhibited the transient rise in [Ca²⁺]_i produced by progesterone, but 100 μM verapamil had only a partial effect. We conclude that (1) cryopreservation causes a substantial elevation of the [Ca²⁺]_i in human spermatozoa and (2) damage to the plasma membrane during cryopreservation may result in the loss of the progesterone receptor. Both factors may contribute to the loss of fertility after cryopreservation. © 1994 Wiley-Liss, Inc.     

Two new rhodamine‐based fluorescent chemosensors for Fe3+ in aqueous solution

Two new rhodamine‐based fluorescent probes were synthesized and characterized by NMR, high resolution mass spectrometer (HR‐MS) and IR. The probes displayed a high selectivity for Fe³⁺ among environmentally and biologically relevant metal ions in aqueous solution (CH₃OH–H₂O = 3 : 2, v/v). The significant changes in the fluorescence color could be used for naked‐eye detection. Job's plot, IR and ¹H NMR indicated the formation of 1: 1 complexes between sensor 1 and Fe³⁺. The reversibility establishes the potential of both probes as chemosensors for Fe³⁺ detection. The probe showed highly selectivity in aqueous solution and could be used over the pH range between 5 and 9. A simple paper test‐strip system for the rapid monitoring of Fe³⁺ was developed, indicating its convenient use in environmental samples. Copyright © 2014 John Wiley & Sons, Ltd.     

Construction of a novel turn‐on–off fluorescence sensor used for highly selective detection of thiamine via its quenching effect on o‐phen‐Zn2+ complex

In this work, a simple and selective fluorescence sensor approach called ‘turn‐on–off’ for the determination of thiamine (TM) has been developed. As known, the o‐phenanthroline (o‐phen) has inner fluorescence, though when reacted with zinc ions to form the o‐phen–Zn²⁺ complex the fluorescence intensity was enhanced effectively, while upon addition of TM into the o‐phen–Zn²⁺ complex solution, the intensity of the system was gently quenched, which was termed the ‘turn‐on–off’ probe. Notably, the method possessed highly selective, sensitive determination for TM with a detection limit of 0.25 μmol L^?1 and the reduced fluorescence intensity was proportional to the concentration of TM in the range 0.84–80.0 μmol L^?1. Besides, the proposed mechanism was also investigated through exploring the Fourier transform infrared (FT‐IR), nuclear magnetic resonance (NMR) spectroscopy. Furthermore, this manner was successfully applied into practical samples for TM detection with satisfactory results.     

Effect of colloidal β-cyclodextrins-Fe(3) O(4) magnetic nanoparticles on the chemiluminescence enhancement of luminol-Ag(III) complex for rapid and sensitive determination of cysteine in human serum

Colloidals solution of Fe₃O₄ magnetic nanoparticles (MNPs), capped with β‐cyclodextrins (β‐CD) as inclusion complexes, were found to enhance the chemiluminescence (CL) intensity of the luminol–diperiodatoargentate(III) (DPA) system. On injection of cysteine into the luminol–DPA–β‐CD–Fe₃O₄ MNPs inclusion complexes system, the CL intensity is strongly enhanced. The enhanced CL signal is ascribed to the catalytic effect of Fe₃O₄ MNPs capped with β‐CD, which is assumed to stabilize the CL intermediate. Based on these findings, a rapid and sensitive assay was developed for the determination of cysteine in human serum. The effects of analytical variables on the CL signal were studied and optimized. Under the optimum conditions, the CL intensity was directly proportional to the concentration of cysteine in the range 8.0 × 10^–9–1.0 × 10^–6 mol/L. The detection limit was 2.8 × 10^–9 mol/L (3 S_b/m) and the relative standard deviation (RSD) for 10 replicate determinations of 1.0 × 10^–7 mol/L cysteine was 3.5%. The proposed method was applied to the sensitive determination of cysteine in human serum samples, and compared with the Ellman method with satisfactory results. Copyright © 2011 John Wiley & Sons, Ltd.     

Facile synthesis of anthracene-appended amino acids as highly selective and sensitive fluorescent Fe3+ ion sensors

We designed new fluorescent chemical sensors for Fe³⁺ ion detection, by conjugating amino acids as receptors into an anthracene fluorophore. The conjugates were synthesized in solid phase by Fmoc-chemistry. Fluorescence sensors containing Asp (1) and Glu (2) both had exclusive selectivity for Fe³⁺ in 100% aqueous solution and in a mixed organic–aqueous solvent system. Other metal ions did not interfere with the detection ability of the sensors for Fe³⁺. The sensors detect Fe³⁺ ions via a chelation-enhanced fluorescent quenching effect. The binding affinity, reversible monitoring, and pH sensitivity of the sensors were investigated. In addition, detection of fluoride ion among halide ions was done by a chemosensing ensemble method with 1–Fe³⁺ and 2–Fe³⁺ complexes.     

Fluorimetric determination of febuxostat in dosage forms and in real human plasma via Förster resonance energy transfer

A rapid, simple, selective and precise fluorimetric method was developed and validated for determination of a selective xanthine oxidase inhibitor; febuxostat (FBX) in pharmaceutical formulations and in human plasma. The proposed method is based on quenching effect of FBX on the fluorescence intensity of terbium (Tb³⁺) through fluorescence resonance energy transfer (FRET) from Tb³⁺ to FBX. The formed complex was measured at λ_ex. 320 nm/λ_em. 490 nm against a reagent blank. Fluorescence intensity of Tb³⁺ was diminished when FBX was added. A linear relationship between the fluorescence quenching value of the formed complex and the concentration of FBX was investigated. The reaction conditions and the fluorescence spectral properties of the complex have been studied. The linearity range of the developed method was 1.0–16.0 μg/ml. The suggested method was applied successfully for the estimation of FBX in bulk powder, dosage forms and spiked plasma samples with excellent recoveries (96.79–98.89%). In addition, the developed method has been successfully applied for determination of FBX in real plasma samples collected from healthy volunteers with good recoveries (82.06–85.65%). All obtained results of the developed method were statistically analyzed and validated according to ICH (International Conference on Harmonization) guidelines.