Synthesis and luminescence properties of 2‐(benzylcarbamoyl)phenyl derivatives and their europium complexes

Six novel 2‐(benzylcarbamoyl)phenyl derivatives were synthesized and characterized by ¹H‐NMR, mass spectrometry, infrared spectra and elemental analysis. Their europium complexes were prepared and characterized by elemental analysis, EDTA titrimetric analysis, IR and UV spectra as well as molar conductivity measurements. The luminescence properties of these complexes were investigated and results show that 2‐(benzylcarbamoyl)phenyl derivatives possess high selectivity and good coordination with the europium ion. Complex Eu‐2‐(benzylcarbamoyl)phenyl‐2‐phenylacetate showed green luminescence that was emitted by the ligand of 2‐(benzylcarbamoyl)phenyl‐2‐phenylacetate, while other complexes showed the characteristic red luminescence of europium ion and also possessed high luminescence intensity. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis and characterization of novel europium β‐diketonate organic complexes for solid‐state lighting

Volatile Eu complexes, namely Eu(TTA)₃Phen, Eu_(x)Y_(1‐x)(TTA)₃ Phen; Eu_(x)Tb_(1‐x)(TTA)₃Phen; Eu, europium; Y, yttrium; Tb, Terbium; TTA, thenoyltrifluoroacetone; and Phen, 1,10 phenanthroline were synthesized by maintaining stichiometric ratio. Various characterization techniques such as X‐ray diffraction (XRD), photoluminescence (PL) and thermo gravimetric analysis/differential thermal analysis (TGA/DTA) were carried out for the synthesized complexes. Diffractograms of all the synthesized complexes showed well‐resolved peaks, which revealed that pure and doped organic Eu³⁺ complexes were crystalline in nature. Of all the synthesized complexes, Eu_0.5 Tb_0.5(TTA)₃Phen showed maximum peak intensity, while the angle of maximum peak intensity for all complexes was almost the same with slightly different d‐values. A prominent sharp red emission line was observed at 611 nm when excited with light at 370 nm. It was observed that the intensity of red emissions increased for doped europium complexes Eu_(x)Y_(1‐x)(TTA)₃Phen and Eu_(x)Tb_(1‐x)(TTA)₃ Phen, when compared with Eu complexes. Emission intensity increased in the following order: Eu(TTA)₃Phen > Eu_0.5 Tb_0.5(TTA)₃Phen > Eu_0.4 Tb_0.6(TTA)₃Phen > Eu_0.5Y_0.5(TTA)₃Phen > Eu_0.4Y_0.6(TTA)₃Phen, proving their potential application in organic light‐emitting diodes (OLEDs). TGA showed that Eu complexes doped in Y³⁺ and Tb³⁺ have better thermal stability than pure Eu complex. DTA analysis showed that the melting temperature of Eu(TTA)₃ Phen was lower than doped Eu complexes. These measurements infer that all complexes were highly stable and could be used as emissive materials for the fabrication of OLEDs. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis and luminescence properties of novel 8‐hydroxyquinoline derivatives and their Eu(III) complexes

Six novel 8‐hydroxyquinoline derivatives were synthesized using 2‐methyl‐8‐hydroxyquinoline and para‐substituted phenol as the main starting materials, and were characterized by ¹H nuclear magnetic resonance (NMR), mass spectrometry (MS), ultraviolet (UV) light analysis and infra‐red (IR) light analysis. Their complexes with Eu(III) were also prepared and characterized by elemental analysis, molar conductivity, UV light analysis, IR light analysis, and thermogravimetric–differential thermal analysis (TG–DTA). The results showed that the ligand coordinated well with Eu(III) ions and had excellent thermal stability. The structure of the target complex was EuY^1–6(NO₃)₃.2H₂O. The luminescence properties of the target complexes were investigated, the results indicated that all target complexes had favorable luminescence properties and that the introduction of an electron‐donating group could enhance the luminescence intensity of the corresponding complexes, but the addition of an electron‐withdrawing group had the opposite effect. Among all the target complexes, the methoxy‐substituted complex (–OCH₃) had the highest fluorescence intensity and the nitro‐substituted complex (–NO₂) had the weakest fluorescence intensity. The results showed that 8‐hydroxyquinoline derivatives had good energy transfer efficiency for the Eu(III) ion. All the target complexes had a relatively high fluorescence quantum yield. The fluorescence quantum yield of the complex EuY³(NO₃)₃.2H₂O was highest among all target complexes and was up to 0.628. Because of excellent luminescence properties and thermal stabilities of the Eu(III) complexes, they could be used as promising candidate luminescent materials.     

Fluorescence enhancement of europium (III) perchlorate by 1,10‐phenanthroline on the 1‐(naphthalen‐2‐yl)‐2‐(phenylsulthio)ethanone complex and luminescence mechanism

A novel ligand, 1‐(naphthalen‐2‐yl)‐2‐(phenylsulthio)ethanone was synthesized using a new method and its two europium (Eu) (III) complexes were synthesized. The compounds were characterized by elemental analysis, coordination titration analysis, molar conductivity, infrared, thermo gravimetric analyzer‐differential scanning calorimetry (TGA‐DSC), ¹H NMR and UV spectra. The composition was suggested as EuL₅ · (ClO₄)₃ · 2H₂O and EuL₄ · phen(ClO₄)₃ · 2H₂O (L = C₁₀H₇COCH₂SOC₆H₅). The fluorescence spectra showed that the Eu(III) displayed strong characteristic metal‐centered fluorescence in the solid state. The ternary rare earth complex showed stronger fluorescence intensity than the binary rare earth complex in such material. The strongest characteristic fluorescence emission intensity of the ternary system was 1.49 times as strong as that of the binary system. The phosphorescence spectra were also discussed. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and spectroscopic investigations of four-coordinate nickel complexes supported by a strongly donating scorpionate ligand

Two four-coordinate nickel complexes, HB(^tBuIm)₃NiBr and HB(^tBuIm)₃NiNO, were prepared by reaction of a bulky tris(carbene)borate ligand with NiBr₂(PPh₃)₂ and NiBr(NO)(PPh₃)₂, respectively, and structurally and spectroscopically characterized. In addition to standard techniques, high-frequency and -field electron paramagnetic resonance (HFEPR) was employed to understand the spin triplet (S = 1) ground state of the bromo complex. HFEPR, combined with electronic absorption spectroscopy allows comparison of this novel complex with other paramagnetic four-coordinate Ni(II) species. The tris(carbene)borate ligand is a stronger σ-donor than corresponding tris(pyrazolyl)borates (traditional “scorpionate” ligands). The tris(carbene)borate ligand may also act as a π-acceptor, in contrast to tris(pyrazolyl)borates, which show relatively little π-bonding interactions. The influence of tris(carbene)borate substituents on the donor strength of the ligand have been elucidated from IR spectroscopic investigations of {NiNO}¹⁰ derivatives. HFEPR spectra of HB(^tBuIm)₃NiBr exhibit hyperfine coupling from Br, which indicates the strong electronic interaction between Ni(II) and this halide ligand, consistent with studies on tris(pyrazolyl)borate Ni(II) complexes.     

Preparation, crystal structure and luminescent properties of lanthanide picrate complexes with N-benzyl-2-{2′-[(benzyl-methyl-carbamoyl)-methoxy]-biphenyl-2-yloxy}-N-methyl-acetamide (L)

A new amide-based ligand derived from biphenyl, N-benzyl-2-{2′-[(benzyl-methyl-carbamoyl)-methoxy]-biphenyl-2-yloxy}-N-methyl-aceamide (L) was synthesized. Solid complexes of lanthanide picrates with this new ligand were prepared and characterized by elemental analysis, conductivity measurements, IR and electronic spectroscopies. The molecular structure of [Eu(pic)₃L] shows that the Eu(III) ion is nine-coordinated by four oxygen atoms from the L and five from two bidentate and one unidentate picrates. All the coordinate picrates and their adjacent equivalent picrates form intermolecular π-π stacking. Furthermore, the [Eu(pic)₃L] complex units are linked by the π-π stacking to form a two-dimensional (2-D) netlike supramolecule. Under excitation, the europium complex exhibited characteristic emissions. The lifetime of the ⁵D₀ level of the Eu(III) ion in the complex is 0.22 ms. The quantum yield Φ of the europium complex was found to be 1.01 × 10⁻³ with quinine sulfate as reference. The lowest triplet state energy level of the ligand indicates that the triplet state energy level of the ligand matches better to the resonance level of Eu(III) than Tb(III) ion.     

DNA photocleavage activity of cobalt(III) polypyridyl complexes containing dpq ligand

Four cobalt(III) polypyridyl complexes, [Co(phen)_3−n(dpq)_n]³⁺ (phen = 1,10-phenanthroline, dpq = dipyrido[3,2-f:2′,3′-h]-quinoxaline) (n = 0, 1, 2, and 3) were synthesized and the influences of the dpq ligand on the photophysical properties, electrochemical properties, DNA binding affinities, as well as photonuclease activities of the complexes, were examined in detail. The presence of dpq ligand increases the DNA binding affinities of the corresponding complexes remarkably with respect to [Co(phen)₃]³⁺. With the sequential substitution of phen ligand by dpq ligand, the ¹O₂ quantum yields of the corresponding complexes are enhanced greatly. As a result, the photonuclease activities follow the order of [Co(dpq)₃]³⁺ > [Co(phen)(dpq)₂]³⁺ > [Co(phen)₂(dpq)]³⁺ ? [Co(phen)₃]³⁺. It was found all the examined complexes can generate OH upon UV irradiation, and OH is also involved in DNA photocleavage as reactive oxygen species.     

Fluorescence and circular dichroism studies with hemocyanin from taiwan snails

Several derivatives of hemocyanin from Taiwan snails (Achatina fulica) have been prepared. The reconstituted protein (R-HcO₂) has lower Cu content, lower circular dichroism intensity, and higher fluorescence intensity than native oxyhemocyanin (HcO₂). The Co(II) derivative (CoHc) does not take up molecular oxygen and only 50% of the total sites for Cu in native hemocyanin is taken up by Co. The half-apo derivative (half-apo-Hc) contains a single Cu per active site. Divalent cations quench the tryptophan fluorescence in the hemocyanin species and also quench the fluorescence from Tb³⁺ bound to the protein. The collisional quenching constants decrease in the order Co²⁺ > Mn²⁺ > Ca²⁺. The static component is negligible. For carboxy hemocyanin (HcCO), fluorescence originates from a Cu(I) CO complex and was used to study reaction of Hc CO with CN⁻.     

Synthesis, crystal structure and photophysical properties of europium(III) and terbium(III) complexes with pyridine-2,6-dicarboxamide

The reactions of pyridine-2,6-dicarboxamide with europium(III) and terbium(III) triflates led to the formation of mononuclear complexes of formula [Ln(pcam)₃](CF₃SO₃)₃ (Ln = Eu 1, Tb 2; pcam stands for pyridine-2,6-dicarboxamide). From single-crystal X-ray diffraction analysis, the complexes were found to be isomorphous and isostructural. The [Ln(pcam)₃]³⁺ cations and triflate counterions are connected by intermolecular hydrogen bonds, resulting in a 3D network structure. Both the europium(III) and terbium(III) complexes exhibit efficient ligand sensitized luminescence in the visible region with lifetimes of 1.9 ms and 2.2 ms, respectively, in the solid state.     

Synthesis, characterization and electrochemistry of bis(3-aryl-6,6-dimethylcyclohexadienyl)ruthenium complexes

Five bis(3-aryl-6,6-dimethylcyclohexadienyl)ruthenium complexes (4a-4e) are prepared by reactions between di-μ-chlorodichlorobis[(1-3η:6-8η)-2,7-dimethyl-octadienyl]diruthenium and the corresponding dienes. The larger aryl substituents increase the barrier to rotation in 4a-4e relative to bis(3-methyl-6,6-cyclohexadienyl)ruthenium (5b). The activation parameters were determined by line-shape analysis for the exchange process in 4a: ΔG^† (183 K), 8.0 ± 0.2 kcal/mol; ΔH^†, 10.3 kcal/mol; and ΔS^†, 13 cal/mol/K. The electronic effect of the aryl substituents on the cyclohexadienyl ligand on the oxidation potential of the complex are compared to the effect of methyl substituents.     

Synthesis and evaluation of the europium(III) and zinc(II) complexes as luminescent bioprobes in high content cell-imaging analysis

Novel phenanthroline derivatives and their europium(III) and zinc(II) complexes have been prepared in up to 92%. In contrast to the stable zinc complexes, the europium compounds exhibit a strong luminescence in THF solution. However, quenching of the emission is observed in DMSO indicating complete dissociation of the complexes back to free ligands in this solvent. ¹H NMR studies of the Eu(III)-complexes 5 and 6 also confirmed the existence of different states depending on the solvent used. Moreover, it was found that compound 5 is stable in EtOH-PBS solutions; here a strong signal in the emission spectra corresponding to the europium ion was detected. No spectral changes were observed for the zinc(II) complexes, they were shown to be stable in the media. These metal complexes can be used as fluorescence markers for the diagnosis of oesophageal squamous carcinoma (OE21) cells at low concentrations. Cell images were acquired using the compounds 5, 7-9 as luminescent agents. The first images were taken already after 20 min incubation time at a very low concentration range (0.7-1.6 μM).     

Synthesis and characterization of gold(III) complexes with alkyldiamine ligands

A series of gold(III) metalacycle of five-, six- and seven-membered ring was prepared by reacting Auric acid (HAuCl₄ · 3H₂O) with 1 equiv. unsubstituted ethylenediamine (en), propylene diamine (pn) and butylenediamine (bn) ligands and with some N-mono-substituted as well as N,N′-disubstituted ethylenediamine ligands. The general formula of these complexes is [Au(alkyldiamine)Cl₂]Cl. These complexes are characterized by melting point and elemental analysis, while structural analysis was done by spectroscopic techniques such as UV-Vis, Far-IR, IR spectroscopy, ¹H and ¹³C solution as well as ¹³C and ¹⁵ N solid-state NMR. The solid-state ¹⁵ N NMR shows that the chemical shift difference between free and bound ligand decreases as bn > pn > en, indicating stronger Au-N bond for bn complex compared to pn and en. UV-Vis shows relative stability of the Au(III) complexes of unsubstituted ethylenediamine with respect to N,N′-di-substituted ethylenediamine. Far-IR data show the six-membered metalacycle gold(III) alkanediamine complexes to be more stable. Spectroscopic data are evaluated by comparisons with calculated data of the built and optimized structure by gaussian03 at the RB3LYP level with LanL2DZ bases set.     

Synthesis, structural and corrosion inhibition studies on cobalt(II), nickel(II), copper(II) and zinc(II) complexes with 2-acetylthiophene benzoylhydrazone

Cobalt(II), nickel(II), copper(II) and zinc(II) complexes with 2-acetylthiophene benzoylhydrazone have been synthesized and characterized by elemental analyses, magnetic susceptibility measurements, electronic, IR, NMR and ESR spectral techniques. The molecular structures of ligand and its copper(II) complex have been determined by single crystal X-ray diffraction technique. The Cu(II) complex possesses a CuN₂O₂ chromophore with a considerable delocalization of charge. The structure of the complex is stabilized by intermolecular π–π stacking and C–H?π interactions. Hatbh acts as a monobasic bidentate ligand in all the complexes bonding through a deprotonated C–O⁻ and >CN groups. Electronic spectral studies indicate an octahedral geometry for the Ni(II) complex while square planar geometry for the Co(II) and Cu(II) complexes. ESR spectrum of the Cu(II) complex exhibits a square planar geometry in solid and in DMSO solution. The trend g_|| > g_⊥ > 2.0023 indicates the presence of an unpaired electron in the d_x²-y² orbital of Cu(II). The electro-chemical study of Cu(II) complex reveals a metal based reversible redox behavior. The Ni(II) complex shows exothermic multi-step decomposition pattern of the bonded ligand. The ligand and its most of the metal complexes show appreciable corrosion inhibition properties for mild steel in 1 M HCl medium. [Co(atbh)₂] complex exhibited the greatest impact on corrosion inhibition among the other compounds.     

Cyclic voltammetric and infrared spectral studies on the interaction of Ni(II) dithiocarbamates with triphenylphosphine and the crystal and molecular structure of diethyldithiocarbamatobis(triphenylphosphine)nickel(II)perchlo-rate, [Ni(dedtc)(PPh3)2]ClO4

Ni(II) dithiocarbamates (Ni(dtc)₂) with various substituents on dtc were allowed to react with triphenylphosphine (PPh₃). Mixed ligand complexes of the general formulae Ni(dtc)Cl(PPh₃) and [Ni(dtc)(PPh₃)₂]ClO₄ were prepared. The complexes were analysed by high resolution IR spectra. Comparison of the ν(C–N) frequencies of different complexes viz., Ni(dtc)₂, Ni(dtc)Cl(PPh₃) and [Ni(dtc)(PPh₃)₂]ClO₄, showed the following order of decreasing v(C–N) values: [Ni(dtc)(PPh₃)₂]⁺> Ni(dtc)Cl(PPh₃)> Ni(dtc)₂. The observation showed the extent of contribution of the thiouride form in describing the structure of the complexes. The higher the contribution, larger is the value of ν(C–N). Cyclic voltammetric studies on the complexes showed the one electron reduction potentials to decrease in the following order: Ni(dtc)Cl(PPh₃)>Ni(dtc)₂> [Ni(dtc)(PPh₃)₂]⁺. The observations are explained with the nature of the substituents on the dtc moiety and other ligands present around Ni(II). Crystal structure of [Ni(dedtc) (PPh₃)₂]ClO₄ (dedtc = diethyldithiocarbamate) was determined to study the effect of the introduction of PPh₃ in place of Cl in the Ni(dtc)Cl(PPh₃) complex. The complex is planar with NiS₂P₂ chromophore. The NiS distances are 2.190(2) and 2.239(2) Å and the NiP distances are 2.230(2) and 2.200(2) Å. The asymmetry in the NiS and NiP distances is ascribed to the steric effect due to bulky PPh₃. The structural aspects are compared with those of the Ni(dtc)Cl(PPh₃) complex.     

Mononuclear nickel and copper complexes with indolecarboxamide ligands: Synthesis, properties and electrochemistry

Few nickel(II) and copper(II) complexes have been prepared with three new indolecarboxamide ligands (H₄L³, H₄L⁴ and H₄L⁵) offering two N_amide and two N_indole donor sites to the metal center. The ligands carry electron-donating (-CH₃); -H; and electron-withdrawing (-Cl) substituents on the phenylene backbone to evaluate their effect on the structure and redox properties of the metal complexes. One of the representative nickel complexes has been structurally characterized and reveals that the ligand create a distorted square-planar geometry around the metal center. The electrochemical results suggest that the Ni^3+/2+ and Cu^3+/2+ redox couple primarily depends on the tetra-anionic N₄ donors; however, the electronic substituents shift the redox potentials by 285 mV. The observed M^3+/2+ redox potentials (0.007-0.30 V versus SCE) for these complexes are considerably on lower side due to strong σ-donation from the tetra-deprotonated form of the indolecarboxamide ligands. Based on the redox investigations, the transient M³⁺ species were generated electrochemically and characterized by the absorption spectroscopy.     

Red emissive ternary europium complexes: synthesis,optical, and luminescence characteristics

Solid ternary europium complexes consisting of fluorinated β-diketone (thenoyltrifluoroacetone, TTFA) and heteroaromatic bidentate auxiliary ligands were synthesized. The luminescence features of the complexes were estimated using various spectral measurements and clearly proved that the Eu³⁺ ion is efficiently sensitized by ligands by an antenna effect. Photoluminescence excitation spectra have shown that Eu(III) complexes are excited effectively in the ultraviolet (UV) region and the corresponding emission spectra consist of characteristic peaks attributed to the ⁵D₀→⁷F_J transitions of the europium ion with the strongest emission peak at 611 nm (⁵D₀→⁷F₂). From photoluminescence (PL) data, decay time, Judd–Ofelt parameters, transition rates, and quantum efficiency of the complexes were also determined. The Commission Internationale de l'éclairage (CIE) colour coordinates indicated the bright red emission of ternary europium complexes. Correlated colour temperature values indicated the utilization of these complexes in display devices. Judd–Ofelt and photophysical parameters were also estimated theoretically using LUMPAC software. Various frontier molecular orbitals and their respective energy were determined. These red emissive europium complexes could be utilized for fabricating solid-state lighting systems.     

Antiproliferative activity and QSAR study of copper(II) mixed chelate [Cu(N-N)(acetylacetonato)]NO3 and [Cu(N-N)(glycinato)]NO3 complexes, (Casiopeínas)

Mixed chelate copper(II) complexes patented and mark title registered as Casiopeínas^® are antineoplastic agents with general formulas [Cu(N-N)(α-l-amino acidato)]NO₃ and [Cu(N-N)(O-O)]NO₃, where the N-N donor is an aromatic substituted diimine (1,10-phenanthroline (phen) or 2,2′-bipyridine (bpy)) and the O-O donor is acetylacetonate (acac) or salicylaldehydate (salal). In the present work, the series of complexes [Cu(N-N)(acac)]NO₃ and [Cu(N-N)(gly)]NO₃ with several substituents on the diimine ligand were selected to perform a quantitative structure-activity relationship (QSAR) study. Two main analysis were performed: (1) the study of the influence of the substituents on diimine ligand on physicochemical properties such as half-wave potential (E_1/2) and their relationship with medial lethal dose (LD50) or medial inhibitory concentration (IC50) on several tumor cell lines and (2) the study of the influence of the secondary ligand when acac is changed for glycinate (gly). Results showed that the presence of the central fused aromatic ring in the phen containing complexes is necessary to preserve the antiproliferative activity. The QSAR equations showed a strong relationship between the IC50 and E_1/2; the most active complexes are the weaker oxidants. The change of secondary ligand from acac to gly has less influence on biological activity than the changes on the diimine ligand.     

Synthesis and biological studies of 4', 7, 8-trihydroxy-isoflavone metal complexes

A new series of complexes of a ligand 4′, 7, 8-trihydroxy-isoflavone with transition metal (zinc, copper, manganese, nickel, cobalt) and selenium have been synthesized and characterized with the aid of elemental analysis, IR, electron ionization mass spectrum (EI-MS) and ¹H NMR spectrometric techniques. The compounds were evaluated for their in vitro antibacterial activities and antitumor properties. The metal complexes were found to be more active than the free ligand. Investigation on the interaction between the complexes and calf-thymus DNA (CT DNA) showed that the absorbance of CT DNA increased and the maximum peak (λ_max = 260 nm) red-shifted, while the intensity of fluorescence spectra of Epstein-Bart DNA (EB-DNA) gradually weakened, which indicated that all of these metal complexes tightly combined with CT DNA.     

Synthesis of a novel pyridine-diamino bridged diphosphine ligand and its macrocyclic metal complexes

A novel long chain diphosphine ligand with a pyridine-diamino bridge, 2,6-bis(N-benzyl-N-diphenylphosphinomethylamino)pyridine (PNP1), was prepared conveniently using the Mannich reaction of HPPh₂ with paraformaldehyde and 2,6-bis(N-benzylamino)pyridine in high yield. Reactions of the ligand with metal complexes, M(COD)Cl₂ (M = Pd, Pt), M(CH₃CN)₄ClO₄ (M = Cu, Ag) and M(CO)₆ (M = Mo, W) afforded the corresponding 10-numbered monometallic macrocyclic complexes with an uncoordinated pyridyl bridge. The monometallic chelate PdCl₂(PNP1) continued to react with Ag⁺ or Cu⁺ giving the μ-Cl bridged bicyclic metallic complex (μ-Cl)₂[PdCl(PNP1)]₂. The diphenylphosphine group coordinated with metal ion in cis-form in all the 10-numbered macrocyclic metal complexes. Ligand PNP1 and another known analogous 2,6-bis(N-diphenylphosphinoamino)pyridine (PNP2) reacted with Au(SMe₂)Cl giving the corresponding bimetallic Au₂Cl₂(PNP1) and Au₂Cl₂(PNP2), respectively. The latter bimetallic complexes continued to react with Ag⁺ and diphosphine ligand to give the corresponding bimetallic macrocyclic complexes Au₂(ligand)₂(ClO₄)₂. All the complexes were characterized and the structures of some complexes were confirmed by X-ray single crystallography determination.     

Synthesis and characterization of an N-coordinated amidate copper(II) complex of deprotonated N-(2,6-diisopropylphenyl)-2-(bis-(2-pyridylmethyl))aminoethanamide

The title ligand, N-(2,6-diisopropylphenyl)-2-(bis-(2-pyridylmethyl))aminoethanamide (DIPMAE-H), was prepared by a nucleophilic substitution reaction between N-(2,6-diisopropyl)phenyl-2-bromoethanamide and bis-(2-pyridylmethyl)amine. An analogous ligand (TBPMAE-H) in which the 2,6-diisopropylphenyl group was substituted for a tert-butyl group was also prepared in this manner. Then, [(DIPMAE-H)CuBr]⁺Br⁻ and [(TBPMAE-H)CuBr]⁺Br⁻ were prepared by heating one equivalent of ligand and CuBr₂ in CH₃CN. In both compounds the geometry about the copper center is square pyramidal with distortions due to the geometrical constraints of the ligand. The amide oxygen occupies the axial position, and the three amine nitrogens and the bromide ligand form the basal plane of the square pyramid. Pairs of complexes in the unit cell are associated via weak donation of a lone pair on the bromide ligand of one complex to the copper center of another (Cu?Br distances in the range of 3.3576-3.4022 Å).The title compound, (DIPMAE)CuBr, was prepared by deprotonation of [(DIPMAE-H)CuBr]⁺Br⁻ using NaH. The key feature of (DIPMAE)CuBr is the amidate group η¹- and N-coordinated to the copper center. The compound also exhibits distorted trigonal bipyramidal coordination geometry with the bromide and tertiary amine donors occupying the axial sites and the amidate and pyridyl donors occupying the equatorial positions. The copper atom is displaced from the trigonal plane towards the bromide donor apex due to the geometrical demands of the ligand.