Fluorescent quenching-based quantitative detection of specific DNA/RNA using a BODIPY((R)) FL-labeled probe or primer

We have developed a simple method for the quantitative detection of specific DNA or RNA molecules based on the finding that BODIPY((R)) FL fluorescence was quenched by its interaction with a uniquely positioned guanine. This approach makes use of an oligonucleotide probe or primer containing a BODIPY((R)) FL-modified cytosine at its 5'-end. When such a probe was hybridized with a target DNA, its fluorescence was quenched by the guanine in the target, complementary to the modified cytosine, and the quench rate was proportional to the amount of target DNA. This widely applicable technique will be used directly with larger samples or in conjunction with the polymerase chain reaction to quantify small DNA samples.     

Fluorescent quenching-based quantitative detection of specific DNA/RNA using a BODIPY® FL-labeled probe or primer

We have developed a simple method for the quantitative detection of specific DNA or RNA molecules based on the finding that BODIPY^® FL fluorescence was quenched by its interaction with a uniquely positioned guanine. This approach makes use of an oligonucleotide probe or primer containing a BODIPY^® FL-modified cytosine at its 5′-end. When such a probe was hybridized with a target DNA, its fluorescence was quenched by the guanine in the target, complementary to the modified cytosine, and the quench rate was proportional to the amount of target DNA. This widely applicable technique will be used directly with larger samples or in conjunction with the polymerase chain reaction to quantify small DNA samples.     

Double-labeled donor probe can enhance the signal of fluorescence resonance energy transfer (FRET) in detection of nucleic acid hybridization

A set of fluorescently-labeled DNA probes that hybridize with the target RNA and produce fluorescence resonance energy transfer (FRET) signals can be utilized for the detection of specific RNA. We have developed probe sets to detect and discriminate single-strand RNA molecules of plant viral genome, and sought a method to improve the FRET signals to handle in vivo applications. Consequently, we found that a double-labeled donor probe labeled with Bodipy dye yielded a remarkable increase in fluorescence intensity compared to a single-labeled donor probe used in an ordinary FRET. This double-labeled donor system can be easily applied to improve various FRET probes since the dependence upon sequence and label position in enhancement is not as strict. Furthermore this method could be applied to other nucleic acid substances, such as oligo RNA and phosphorothioate oligonucleotides (S-oligos) to enhance FRET signal. Although the double-labeled donor probes labeled with a variety of fluorophores had unexpected properties (strange UV-visible absorption spectra, decrease of intensity and decay of donor fluorescence) compared with single-labeled ones, they had no relation to FRET enhancement. This signal amplification mechanism cannot be explained simply based on our current results and knowledge of FRET. Yet it is possible to utilize this double-labeled donor system in various applications of FRET as a simple signal-enhancement method.     

The effect of avidin-biotin interactions in detection systems for in situ hybridization.

The effect of avidin-biotin interactions in several detection systems for the non-radioactive in situ hybridization (ISH) technique was studied in a model system using a transitional cell carcinoma line and a biotinylated DNA probe. We performed fluorescence ISH to unravel the individual steps in a sensitive and frequently used amplification method which makes use of the alternating cytochemical detection layers of fluorescein isothiocyanate-conjugated avidin (AvFITC) and biotinylated goat anti-avidin (BioGAA) antibodies to detect the hybridized and biotinylated probe. Our experiments revealed that BioGAA antibodies bind with their antigen binding sites and not with their biotin moieties to avidin molecules that have already interacted with the DNA probe. The probable working mechanism of this amplification method is presented in a model. Furthermore, we used a peroxidase staining technique to compare with each other the sensitivity of several other detection systems in which avidin-biotin interactions play an important role, e.g., the avidin-biotinylated peroxidase complex (ABC) system. The experiments show that avidin molecules can not be efficiently used to interconnect two biotinylated molecular layers, since their introduction leads to firmly closed cytochemical networks. Such a closed network is already formed between the hybridized and biotinylated DNA probe and a first detection layer of avidin molecules, as appears from the finding that biotinylated molecules could hardly be coupled to these avidin molecules in a following detection layer. Therefore, the results presented here provide us with new insight into the molecular basis of cytochemical network formation. This will enable us to choose the proper procedures for increasing the sensitivity of ISH detection systems.     

A binary Cy3 aptamer probe composed of folded modules

Aptamers are short single-stranded DNA or RNA sequences that are selected in vitro based on their high affinity to a target molecule. Dye-binding aptamers are promising tools for real-time detection of not only DNA or RNA sequences but also proteins of interest both in vitro and in vivo. In this study, we aimed to isolate an RNA aptamer to Cy3, a widely used, membrane-permeant, and nontoxic fluorescent cyanine dye. Extensive selection of affinity RNA molecules to Cy3 yielded a unique sequence aptamer named Cy3_apt. The selected Cy3_apt was 83 nucleotides long and successfully shortened to 49 nucleotides long with increased affinity to Cy3 by multiple base changes. The shortest Cy3_apt is composed of two separate hairpin modules that are required for the affinity to Cy3 as monitored by the surface plasmon resonance (SPR) assay. Also, the fluorescence of Cy3 increased on binding to Cy3_apt. The two modules of Cy3_apt, when detached from each other, functioned as a binary aptamer probe. We demonstrate that the binary Cy3_apt probe is applicable to the detection of target oligonucleotides or RNA-RNA interaction by tagging with target sequences. This binary probe consists of two folded modules, referred to as a folded binary probe.     

Label-free detection of 16S ribosomal RNA hybridization on reusable DNA arrays using surface plasmon resonance imaging

In this paper, we describe the detection of bacterial cell-extracted 16S ribosomal RNA (rRNA) using an emerging technology, surface plasmon resonance (SPR) imaging of DNA arrays. Surface plasmon resonance enables detection of molecular interactions on surfaces in response to changes in the index of refraction, therefore eliminating the need for a fluorescent or radioactive label. A variation of the more common SPR techniques, SPR imaging enables detection from multiple probes in a reusable array format. The arrays developed here contain DNA probes (15-21 bases) designed to be complementary to 16S rRNA gene sequences of Escherichia coli and Bacillus subtilis as well as to a highly conserved sequence found in rRNAs from most members of the domain Bacteria. We report species-specific hybridization of cell-extracted total RNA and in vitro transcribed 16S rRNA to oligonucleotide probes on SPR arrays. We tested multiple probe sequences for each species, and found that success or failure of hybridization was dependent upon probe position in the 16S rRNA molecule. It was also determined that one of the probes intended to bind 16S rRNA also bound an unknown protein. The amount of binding to these probes was quantified with SPR imaging. A detection limit of 2 micro g ml-1 was determined for fragmented E. coli total cellular RNA under the experimental conditions used. These results indicate the feasibility of using SPR imaging for 16S rRNA identification and encourage further development of this method for direct detection of other RNA molecules.     

Selective fluorescence quenching of papain–Au nanoclusters by self‐polymerization of dopamine

In this paper, we synthesized a papain‐stabilized fluorescent Au nanocluster (NC) probe and studied its interaction with dopamine. As fluorescence of papain–Au NCs is quenched in the presence of dopamine under alkaline conditions, we were able to establish a simple, selective analytical method for dopamine determination. By studying the fluorescence lifetime and dynamic light scattering of the NCs before and after interaction with dopamine, we found that this fluorescence quenching mechanism was possibly due to dopamine self‐polymerization that produced polydopamine that cross‐linked papain–Au NCs. Based on this new phenomenon, we proposed a highly selective analytical method for dopamine detection. Other small organic molecules, such as amino acids, ascorbic acid and uric acid did not interfere with dopamine detection. Dopamine in the range 20–100 μM can be linearly detected by the fluorescence quenching ratio of gold nanoclusters. Dopamine detection could be visually realized by watching color changes of papain–Au NCs under UV light or daylight, as both fluorescence and absorption of the papain–Au NCs changed during dopamine polymerization.     

LNA flow–FISH: A flow cytometry–fluorescence in situ hybridization method to detect messenger RNA using locked nucleic acid probes

We present a novel method using flow cytometry–fluorescence in situ hybridization (flow–FISH) to detect specific messenger RNA (mRNA) in suspended cells using locked nucleic acid (LNA)-modified oligonucleotide probes. β-Actin mRNA was targeted in whole A549 epithelial cells by hybridization with a biotinylated, LNA-modified probe. The LNA bound to β-actin was then stained using phycoerythrin-conjugated streptavidin and detected by flow cytometry. Shifts in fluorescence signal intensity between the β-actin LNA probe and a biotinylated, nonspecific control LNA were used to determine optimal conditions for this type of flow–FISH. Multiple conditions for permeabilization and hybridization were tested, and it was found that conditions using 3 μg/ml of proteinase K for permeabilization and 90 min hybridization at 60 °C with buffer containing 50% formamide allow cells containing the LNA-bound mRNA to be detected and differentiated from the control LNA with high confidence (< 14% overlap between curves). This combined method, called LNA flow–FISH, can be used for detection and quantification of other RNA species as well as for telomerase measurement and detection.     

Species-differentiable sensing of phosphate-containing anions in neutral aqueous solution based on coordinatively unsaturated lanthanide complex probes

A new chromogenic/fluorogenic molecular probe was developed for highly selective and species-differentiable detection of phosphate-containing anions in neutral aqueous solution. The coordinatively unsaturated lanthanide complex, made from Eu(III) ion and 2-[(8-hydroxy-5-sulfo-7-quinoline)azo]-1,8-dihydroxy-3,6-naphthalene disulfonic acid, changed its conformation when binding to the incoming target anions, which resulted in differential absorption or fluorescence responses. It was demonstrated that not only phosphate and pyrophosphate but also DNA and RNA could be clearly distinguished by visible absorption or fluorescence spectra. Also, differential responses in absorption spectra were observed when AMP, ADP, and ATP were added into the sensing system. Selective quantitation of these phosphate-containing anions in aqueous solutions, therefore, can be easily available. DNA and RNA were distinguished by different colors and independent fluorescence emissions due to their intrinsic differences in beta-D-ribose residues. Simultaneous or independent quantitation of DNA and RNA in a mixture sample, therefore, is possible without pretreatment with nuclease. Furthermore, the influence from the base selectivity can be eliminated by the use of the probe. The detection limits of phosphate and 5'-ATP in neutral water were 6.0 x 10(-7) and 9.0 x 10(-7)M, respectively, by the UV/Vis spectrophotometric method; the detection limits were 12.3 ng/mL for DNA by fluorimetry and 2.3mg/L for RNA by UV/Vis spectrophotometry.     

Real time RNA transcription monitoring by Thiazole Orange (TO)-conjugated Peptide Nucleic Acid (PNA) probes: norovirus detection

Thiazole Orange (TO)-conjugated Peptide Nucleic Acid (PNA) probes have been reported as a valuable strategy for DNA analysis; however, no investigations targeting RNA molecules and no comparisons between different derivatization approaches have been reported so far. In this work, two TO-conjugated PNAs for genogroup II noroviruses (NoV GII) detection were designed and synthesized. Both the probes target the most conserved stretch of nucleotides identified in the open reading frame 1-2 (ORF1-ORF2) junction region and differ for the dye conjugation strategy: one PNA is end-labelled with the TO molecule tethered by a linker; the other probe bears the TO molecule directly linked to the PNA backbone, replacing a conventional nucleobase. The spectroscopic properties of the two PNA probes were studied and their applicability to NoVs detection, using an isothermal assay, was investigated. Both probes showed good specificity and high fluorescence enhancement upon hybridization, especially targeting RNA molecules. Moreover, the two probes were successfully employed for NoVs detection from stool specimens in an isothermal-based amplification assay targeting RNA 'amplicons'. The probes showed to be specific even in the presence of high concentrations of non-target RNA.     

Quantitative fluorescence resonance energy transfer measurements using fluorescence microscopy.

Fluorescence resonance energy transfer (FRET) is a technique used for quantifying the distance between two molecules conjugated to different fluorophores. By combining optical microscopy with FRET it is possible to obtain quantitative temporal and spatial information about the binding and interaction of proteins, lipids, enzymes, DNA, and RNA in vivo. In conjunction with the recent development of a variety of mutant green fluorescent proteins (mtGFPs), FRET microscopy provides the potential to measure the interaction of intracellular molecular species in intact living cells where the donor and acceptor fluorophores are actually part of the molecules themselves. However, steady-state FRET microscopy measurements can suffer from several sources of distortion, which need to be corrected. These include direct excitation of the acceptor at the donor excitation wavelengths and the dependence of FRET on the concentration of acceptor. We present a simple method for the analysis of FRET data obtained with standard filter sets in a fluorescence microscope. This method is corrected for cross talk (any detection of donor fluorescence with the acceptor emission filter and any detection of acceptor fluorescence with the donor emission filter), and for the dependence of FRET on the concentrations of the donor and acceptor. Measurements of the interaction of the proteins Bcl-2 and Beclin (a recently identified Bcl-2 interacting protein located on chromosome 17q21), are shown to document the accuracy of this approach for correction of donor and acceptor concentrations, and cross talk between the different filter units.     

Translation inhibition reveals interaction of 2′-deoxy and 2′-O-methyl molecular beacons with mRNA targets in living cells

Understanding the interaction between oligonucleotide probes and RNA targets in living cells is important for biological and clinical studies of gene expression in vivo. Here, we demonstrate that starvation of cells and translation inhibition by blocking the mTOR or PI-3 kinase pathway could significantly reduce the fluorescence signal from 2′-deoxy molecular beacons (MBs) targeting K-ras and GAPDH mRNAs in living cells. However, the intensity and localization of fluorescence signal from MBs targeting nontranslated 28S rRNA remained the same in normal and translation-inhibited cells. We also found that, in targeting K-ras and GAPDH mRNAs, the signal level from MBs with 2′-O-methyl backbone did not change when translation was repressed. Taken together, our findings suggest that MBs with DNA backbone hybridize preferentially with mRNAs in their translational state in living cells, whereas those with 2′-O-methyl chemistry tend to hybridize to mRNA targets in both translational and nontranslational states. This work may thus provide a significant insight into probe design for detection of RNA molecules in living cells and RNA biology.     

Real‐time nucleic acid sequence–based amplification (NASBA) using an adenine‐induced quenching probe and an intercalator dye

Aims: We found that an adenine base caused fluorescence quenching of a fluorescein (FL)‐labelled probe in DNA:RNA hybrid sequences, and applied this finding to a nucleic acid sequence–based amplification (NASBA) method. Methods and Results: The present NASBA method employed a probe containing an FL‐modified thymine at its 3′ end and ethidium bromide (EtBr) on the basis of a combination of adenine‐induced quenching and fluorescence resonance energy transfer (FRET) between the FL donor and EtBr acceptor. This NASBA was used to detect Shiga toxin (STX) stx‐specific mRNA in STX‐producing Escherichia coli, demonstrating rapid quantification of the target gene with high sensitivity. Conclusion: Although the inherent quenching effect of adenine was inferior to that of guanine, FRET between the FL and EtBr moieties enhanced the adenine‐induced quenching, allowing rapid and sensitive real‐time NASBA detection. Significance and Impact of the Study: This study gives a novel real‐time diagnostic system based on NASBA for a sensitive mRNA (or viral RNA) detection.     

Characterization and applications of CataCleave probe in real-time detection assays

Cycling probe technology (CPT), which utilizes a chimeric DNA-RNA-DNA probe and RNase H, is a rapid, isothermal probe amplification system for the detection of target DNA. Upon hybridization of the probe to its target DNA, RNase H cleaves the RNA portion of the DNA/RNA hybrid. Utilizing CPT, we designed a catalytically cleavable fluorescence probe (CataCleave probe) containing two internal fluorophores. Fluorescence intensity of the probe itself was weak due to F?rster resonance energy transfer. Cleavage of the probe by RNase H in the presence of its target DNA caused enhancement of donor fluorescence, but this was not observed with nonspecific target DNA. Further, RNase H reactions with CataCleave probe exhibit a catalytic dose-dependent response to target DNA. This confirms the capability for the direct detection of specific target DNA through a signal amplification process. Moreover, CataCleave probe is also ideal for detecting DNA amplification processes, such as polymerase chain reaction (PCR) and isothermal rolling circle amplification (RCA). In fact, we observed signal enhancement proportional to the amount of RCA product formed. We were also able to monitor real-time PCR by measuring enhancement of donor fluorescence. Hence, CataCleave probe is useful for real-time monitoring of both isothermal and temperature-cycling nucleic acid amplification methods.