Simultaneous determination of piroxicam and norfloxacin in biological fluids by high‐performance liquid chromatography with fluorescence detection at zero‐order emission mode

A new highly sensitive high‐performance liquid chromatographic method with fluorescence detection (HPLC–FLD) in zero‐order emission mode was developed for the first time for the simultaneous determination of piroxicam (PRX) and norfloxacin (NRF) in biological fluids. The fluorescence detector wavelengths were set at 278 nm for excitation and zero‐order mode for emission. The zero‐order emission mode produced greater sensitivity for the measurement of both drugs than a fixed emission wavelength (446 nm). The new developed method was validated according to International Conference of Harmonization (ICH) guidelines. Linearity was found to be over concentration ranges 0.001–20 μg/ml and 0.00003–0.035 μg/ml for PRX and NRF, respectively. The limits of detection were 4.87 × 10^?4 and 1.32 × 10^?5 μg/ml for PRX and NRF, and the limits of quantitation were 1.47 × 10^?3 and 4.01 × 10^?5 μg/ml, respectively. The current fluorescence method was found to be more sensitive than most commonly used analytical methods and was successfully applied for simultaneous determination of PRX and NRF in biological fluids (serum and urine) with recoveries ranging from 91.67% to 100.36% for PRX and from 96.00% to 101.43% for NRF.     

A highly sensitive micelle-enhanced synchronous spectrofluorimetric determination of the recently approved co-formulated drugs,bilastine and montelukast in pharmaceuticals and human plasma at nanogram levels

In this study, the simultaneous determination of bilastine and montelukast, two recently approved co-formulated antihistaminic medications, was accomplished using a quick, sensitive, environmentally friendly, and reasonably priced synchronous fluorescence spectroscopic approach for the first time. Enhancement of the method's sensitivity down to nanogram levels was achieved by the addition of sodium dodecyl sulfate (1.0% w/v) as a micellar system. According to the results, bilastine and montelukast's fluorescence was measured at 255.3 and 355.3 nm, respectively, using Δλ of 40.0 nm and distilled water as a green diluting solvent. With respect to the concentration ranges of bilastine (5.0–300.0 ng/ml) and montelukast (50.0–1000.0 ng/ml), the method showed excellent linearity (r ≥ 0.9998). The results showed that the suggested method is highly sensitive, with detection limits of 1.42 and 13.74 ng/ml for bilastine and montelukast, respectively. Within-run precisions (intra- and interday) per cent relative standard deviations (RSD) for both analytes were <0.59%. With high percentage recoveries and low percentage RSD values, the designed approach was successfully applied for the simultaneous estimation of the cited medications in their dosage form and human plasma samples. To evaluate the green profile of the suggested method, an analytical GREENNESS metric approach (AGREE) and green analytical procedure index (GAPI) metric tools were used. These two methods for evaluating greenness confirmed that the developed method met the highest number of green requirements, recommending its use as a green substitute for the routine analysis of the studied drugs. The proposed approach was validated according to ICHQ2 (R1) guidelines.     

First‐derivative synchronous spectrofluorimetric method for estimation of losartan potassium and atorvastatin in their pure forms and in tablets

Losartan potassium (LOS) and atorvastatin (ATR) are used in combination for long‐term treatment of stroke and for treatment of hypertension with high‐level cholesterol. Both drugs were simultaneously determined and validated using a novel, easy, fast, and economical first‐derivative synchronous fluorescence spectroscopic method. Methanol was used as the solvent for both drugs at a Δλ 80 nm and with a scanning rate of 600 nm/min. Peaks were determined as at 288.1 nm and 263.6 nm for LOS and ATR, respectively. The proposed method was validated according to International Conference on Harmonization guidelines and, subsequently, the developed method was applicable to the analysis of the two compounds in their different formulations without interference from each other. Amplitude–concentration plots were rectilinear over the concentration ranges 1.0–10.0 μg/ml and 0.5–5.0 μg/ml for LOS and ATR, respectively. Detection limits were found to be 0.096 μg/ml and 0.030 μg/ml and quantitation limits were 0.291 μg/ml and 0.093 μg/ml for LOS and ATR, respectively. The proposed method was successfully applied to the analysis of both compounds in synthetic mixtures and in laboratory‐prepared tablets. These results were in accordance with the results acquired using the comparison method, high‐performance liquid chromatography.     

High-performance liquid chromatographic determination of tazobactam by precolumn derivatization

A new reversed-phase high-performance liquid chromatography (RP-HPLC) method for the detection and quantification of tazobactam in serum and haemofiltration fluid is described. The assay for these biological fluids involves an extraction with diethyl ether followed by derivatization using 1,2,4-triazole. The mobile phase consisted of phosphate buffer-methanol and the detection wavelength was 325 nm. The limit of detection was 0.05 μg/ml in the two fluids and the calibration curves were linear over the range 0.1–50 μg/ml. For a tazobactam concentration equal to 1, 5 or 20 μg ml⁻¹, the coefficients of variation were less than 5%. The assay was successfully applied to the analysis of samples from drug monitoring in a patient with renal insufficiency undergoing continuous venovenous haemofiltration (CVVH).     

Micelle-enhanced spectrofluorimetric method for the rapid determination of bronchodilator terbutaline and its prodrug bambuterol: application for content uniformity test

A novel, simple and sensitive spectrofluorimetric approach for determination of terbutaline sulphate (TER) and its prodrug bambuterol (BAM) in their pure and pharmaceutical dosage forms was developed. The suggested approach depends on enhancing the native fluorescence of either TER or BAM at 315 and 297.2 nm after excitation at 277 and 259 nm, respectively, using sodium dodecyl sulphate (SDS) as a micellar medium. In the presence of 0.7% w/v SDS, ~1.38-fold and 1.18-fold enhancement is achieved in the relative fluorescence intensity (RFI) of TER and BAM, respectively. The fluorescence–concentration curves were rectilinear over the concentration range 0.8–16 μg ml⁻¹, with detection limits (LOD) of 0.252 and 0.26 (μg ml⁻¹), quantitation limits (LOQ) of 0.76 and 0.79 (μg ml⁻¹), determination coefficients (r2) of 0.9981, and slopes of 45.92 and 10.44 for TER and BAM, respectively. The suggested approach was validated in accordance with International Council for Harmonisation criteria and was effectively applied in the analysis of the studied drugs in their commercial tablets. The high sensitivity of the proposed approach allows its application in evaluating the content uniformity testing of the studied drugs in their tablets through using the official United States Pharmacopeia criteria. Statistical analogies of the findings with that of the reported methods showed really good harmony and indicated no major differences in precision and accuracy.     

Separation of the glucuronides of entacapone and its (Z)-isomer in urine by micellar electrokinetic capillary chromatography

A micellar electrokinetic capillary chromatography (MECC) method was developed for the separation of the 3-O-glucuronides of entacapone and its (Z)-isomer, the two main urinary metabolites of entacapone in humans. Entacapone is a novel, potent inhibitor of catechol-O-methyltransferase (COMT) intended for use as an adjunct in the treatment of Parkinson’s disease. Urine samples spiked with synthetic 3-O-glucuronides were used to study the effects of running buffer pH, composition and applied voltage on separation of the closely migrating glucuronides. The 3-O-glucuronide of nitecapone, was used as internal standard. The greatest improvement in separation was achieved by increasing the running buffer ionic concentration. Changes in pH had little effect on the separation, whereas increase in sodium dodecyl sulfate (SDS) concentration slightly improved resolution. Baseline separation and good selectivity relative to urine components were achieved by using a phosphate (25 mM)–borate (50 mM)–SDS (20 mM) running buffer, pH 7.0, in a 75 μm×60/67 cm fused-silica capillary at 15 kV and a 335 nm cut-off filter in the UV detector. The limits of detection (LOD) at a signal-to-noise ratio of 3 were about 0.25 μg/ml (5.2·10 ⁻⁷M) (injection 0.5 p.s.i./8 s). The linear detection range was 2–100 μg/ml (r²>0.999). Good repeatability of injection and relative migration times were obtained.     

Eco-friendly synchronous fluorescence spectrofluorimetric method for simultaneous determination of montelukast sodium and fexofenadine hydrochloride in their antiallergic rhinitis fixed-dose combination tablets

An innovative, simple, accurate, sensitive, and eco-friendly synchronous fluorescence spectrofluorimetric method has been developed for the simultaneous analysis of montelukast sodium (MON) and fexofenadine hydrochloride (FEX). The method relies on measuring the relative synchronous fluorescence intensity of both drugs using Δλ of 60 nm in methanol at 405 nm for MON and 288 nm for FEX. The experimental parameters influencing the developed method were investigated and optimized. The method was linear over the ranges 0.1–2.0 and 2.0–20.0 μg/ml for MON and FEX, respectively. The limits of detection were 0.018 and 0.441 μg/ml, and the limits of quantitation were 0.055 and 1.336 μg/ml for MON and FEX, respectively. The developed method was applied successfully for the determination of the two drugs in their newly released fixed-dose combination prescribed for the treatment of allergic rhinitis. The mean per cent recoveries were found to be 100.680 ± 0.890 and 100.110 ± 0.940 for MON and FEX, respectively. Furthermore, the method was found to be eco-friendly green as was evaluated according to the Green Analytical Procedure Index tool guidelines and analytical eco-scale.     

Use of eosin for green spectroscopic determination of mebendazole

New, sensitive, and reliable spectroscopic methods were constructed for the fast determination of the anthelmintic drug mebendazole. The methods depended on the reaction of the amino group in mebendazole with eosin in acidic medium forming an ion pair complex. The first method, Method I, relied on quenching of the native fluorescence of eosin after reaction with mebendazole at pH 3.7 using acetate buffer. Fluorescence quenching was measured at 538 nm after excitation at 518 nm. This method showed a linear response over the concentration range 5.0–20.0 μg/ml. The second method, Method II, was based on measuring the absorbance of the formed complex at 554 nm; the method showed good linearity from 7.0 to 22.0 μg/ml. Different parameters that influenced the formation of the reaction product were carefully investigated to reach the optimized conditions. A comparison between the proposed methods and a previous spectrophotometric method was carried out and there was no significant difference between them. The methods could be applied successfully to determine mebendazole in its tablet form. Moreover, the methods used water as diluting solvent, which made them compatible with the ‘green’ analytical chemistry principles. No organic solvents were used throughout the study.     

A sustainable sensitive spectrofluorimetric approach for the determination of the multipotent protein lactoferrin in different pharmaceuticals and infant milk formula: Compliance with greenness metrics

The current study presents the first spectrofluorimetric approach for the estimation of lactoferrin, depending on the measurement of its native fluorescence at 337 nm after excitation at 230 nm, without the need for any hazardous chemicals or reagents. It was found that the fluorescence intensity versus concentration calibration plot was linear over the concentration range of 0.1–10.0 μg/mL with quantitation and detection limits of 0.082 and 0.027 μg/mL, respectively. The method was accordingly validated according to the ICH recommendations. The developed method was applied for the estimation of lactoferrin in different dosage forms, including capsules and sachets with high percent recoveries (97.84–102.53) and low %RSD values (<1.95). Lactoferrin is one of the key nutrients in milk powder and a significant nutritional fortifier. In order to assess the quality of milk powder, it is essential to rapidly and accurately quantify the lactoferrin content of the product. Therefore, the presented study was successfully applied for the selective estimation of lactoferrin in milk powder with acceptable percent recoveries (96.45–104.92) and %RSD values (≤3.607). Finally, the green profile of the method was estimated using two assessment tools: Green Analytical Procedure Index (GAPI) and Analytical GREEnness (AGREE), which demonstrated its excellent greenness.     

Development of a micelle‐enhanced high‐throughput fluorometric method for determination of niclosamide using a microplate reader

The present paper describes the development and validation of a simple and sensitive micelle‐enhanced high‐throughput fluorometric method for the determination of niclosamide (NIC) in 96‐microwell plates. The proposed method is based on the reduction of the nitro group of niclosamide to an amino group using Zn/HCl to give a highly fluorescent derivative that was developed simultaneously and measured at λ_em 444 nm after excitation at λ_ex 275 nm. Tween‐80 and carboxymethylcellulose (CMC) have been used as fluorescence enhancers and greatly enhanced the fluorescence by factors of 100–150%. The different experimental conditions affecting the fluorescence reaction were carefully investigated and optimized. The proposed method showed good linearity (r²≥ 0.9997) over the concentration ranges of 1–5 and 0.5–5 μg/ml with lower detection limits of 0.01 and 0.008 μg/ml and lower quantification limits of 0.04 and 0.03 μg/ml on using Tween‐80 and or CMC, respectively. The developed high‐throughput method was successfully applied for the determination of niclosamide in both tablets and spiked plasma. The capability of the method for measuring microvolume samples made it convenient for handling a very large number of samples simultaneously. In addition, it is considered an environmentally friendly method with lower consumption of chemicals and solvents.     

Ultrafiltration-light absorption spectrophotometric determination of silicon in blood

An ultrafiltration-light absorption spectrometric method for soluble molybdate-reactive silicon was assessed and applied to bovine and ovine blood plasma and sera, giving precise analytical results. Interfering protein above molecular weight 10,000–25,000 was removed by ultrafiltration, and silicon in ultrafiltrates was quantitated by measuring light absorption at 810 nm of the 1,2,4-aminonaphthol sulfonic acid/ascorbic acid-reduced silicomolybdate. Chemical interferences on the color-forming reaction of remaining blood components were tested by measuring recoveries of silicon added to real blood plasma samples and to synthetic blood plasma solutions, the latter containing typical levels of the major ions Na⁺, K⁺, Ca²⁺, HCO₃^?, and Cl^?, together with varying quantities of the potential interferants (amount per analytical reaction): phosphate (0–0.5 mg P), ferric ion (0–3 mg), fluoride (0–1.25 mg), vanadate (0–0.5 mg V), arsenate (0–10 μg As), and germanate (0–0.5 μg Ge). The mean recovery of added 0.8–9 μg silicon/g of bovine and ovine plasma was 97.7% (SE = 1.0, n = 17); the mean recovery of 1 and 5 μg silicon from synthetic blood plasma solutions with interferant levels up to 50-fold that in normal plasma was 99.2% (SE = 0.3, n = 47). Silicon concentrations found in bovine and ovine blood plasma and sera were typically around 7 μg/ml with procedural reagent blanks consistently low at a mean of 0.12 μg/test (SD = 0.011, n = 20). The silicon level in Center for Disease Control bovine serum (reference specimen Lot R-2274) was found to be (mean ± SE, n = 10) 1.147 ± 0.013 μg/g or 1.172 ± 0.013 μg/ml (25°C). The method detectivity (detection limit) was estimated at 0.03 μg.     

Spectrofluorimetric study on fluorescence quenching of tyrosine and l‐tryptophan by the aniracetam cognition enhancer drug: quenching mechanism using Stern–Volmer and double‐log plots

A novel approach on fluorescence quenching of tyrosine and l ‐tryptophan is presented for spectrofluorimetric determination of aniracetam in drug substances and products. The quenching mechanism was investigated using Stern–Volmer plots and ultraviolet spectra figures of quencher–fluorophore mixtures. Binding constant and stoichiometry were calculated using double‐log plots. The spectrofluorimetric method was optimized for the experimental conditions affecting fluorescence quenching including fluorophore concentration, diluent, and reaction time. Moreover, the pH‐rate profile of aniracetam was studied using simple kinetics and found to be stable within the pH range 5–8. Fluorescence quenching of tyrosine and l ‐tryptophan were observed on addition of aniracetam in aqueous medium at pH 5.5–6.5. Aniracetam quenched the fluorescence of tyrosine and l ‐tryptophan in the concentration range 1–20 μg/ml and 0.3–20 μg/ml, respectively, with binomial relationships between quenching values (ΔF) and aniracetam concentration. Limits of detection were found to be 0.10 μg/ml for tyrosine–aniracetam and 0.14 μg/ml for l ‐tryptophan–aniracetam. Method validation was performed as per ICH guidelines and demonstrated that the developed spectrofluorimetric method was accurate, precise, specific, and suitable for analysis of aniracetam in routine quality control laboratories. All experimental materials and solvents used are eco‐friendly, indicating that the cited spectrofluorimetric procedure is an excellent green method.     

Micellar electrokinetic capillary chromatography quantification of cytosine arabinoside and its metabolite,uracil arabinoside,in human serum

Cytosine arabinoside (Ara-C) is widely used to induce remission in adult granulocytic leukemia. High doses can be infused in refractory leukemia or in relapse. After injection, Ara-C is quickly metabolized to uracil arabinoside (Ara-U), the main inactive metabolite. We here described a micellar electrokinetic capillary chromatography (MECC) method to simultaneously determine Ara-C/Ara-U in human serum using 6-O-methylguanine as an internal standard. The assay was linear from 6.25 to 200 μg/ml with a quantification limit between 3 and 6 μg/ml. The analytical precision was satisfactory between 2 and 4.3% (within-run) and 3.7 and 7.3% (between-runs). This assay was applied to the analysis of serum from acute granulocytic leukemia patient treated by high doses cytarabine (3 g/m² body surface).     

Simultaneous determination of primidone and its three major metabolites in rat urine by high-performance liquid chromatography using solid-phase extraction

A new high-performance liquid chromatographic method for simultaneous determination of primidone (PRM) and of its three major metabolites, phenobarbital (PB), p-hydroxyphenobarbital (p-HO-PB) and phenylethylmalonamide (PEMA), in rat urine, was developed. After acid hydrolysis, these compounds were extracted from urine by means of a Bond Elut Certify LRC column with good clean-up. The extracts were chromatographed on a C₁₈ reversed-phase column using isocratic elution at 40°C, with UV detection at 227 nm. The limit of detection was 0.5 mg/ml for the four compounds. Good linearity (r²>0.99) was observed within the calibration ranges studied: 37.4–299.3 μg/ml for PRM, 26.4–211.2 μg/ml for PB, 12.5–100.2 μg/ml for p-HO-PB and 12.1–97.0 μg/ml for PEMA. Repeatability was in the range 3.1–6.8%. This method constitutes a useful tool for studies on the influence of various parameters on primidone metabolism.     

New high-performance liquid chromatographic method for amphotericin B analysis using an internal standard

A simple and reproducible HPLC method for the analysis of amphotericin B (AmB) in serum, lung and liver using natamycin as the internal standard was developed. AmB and natamycin were extracted from serum, lung and liver and were separated using an isocratic elution from a C₁₈ reversed-phase column. The mobile phase consisted of acetonitrile-10 mM acetate buffer pH 4.0 (37:63, v/v). The HPLC system had two detectors in series. One was set at 303 nm and the other at 383 nm for the detection of natamycin and AmB, respectively. The retention times of AmB and natamycin were 15 and 6 min, respectively. The recovery efficiency was 96-70%. The limit of quantification was 0.1 μg/ml. The assay was reproducible, the within-day coefficient of variation (n=6) was <8% for serum, lungs and liver. The between-day variability (n=6) was <7.7% for serum, liver and lungs at 1 μg/ml or 1 μg/g tissue concentration. The assay was linear within the range 1–40 μg/ml (r²=0.999).     

Simultaneous determination of a new anticancer agent (NB-506) and its active metabolite in human plasma and urine by high-performance liquid chromatography with ultraviolet detection

A high-performance liquid chromatographic method with ultraviolet detection has been developed to quantify NB-506 and its active metabolite in human plasma and urine. This method is based on solid-phase extraction, thereby allowing the simultaneous measurement of the drug and metabolite with the limit of quantification of 0.01 μg/ml in plasma and 0.1 μg/ml in urine. Standard curves for the compounds were linear in the concentration ranges investigated. The range for the drug in plasma was 0.01–2.5 μg/ml, and for the metabolite 0.01–1 μg/ml. In urine, the range for both compounds was 0.1–10 μg/ml. The method was validated and applied to the assay of plasma and urinary samples from phase I studies.     

Flame atomic emission spectrometric determination of aluminium in a bovine blood plasma matrix

A flame atomic emission spectrometric method, is described for the determination of aluminium in bovine blood plasma matrices. Plasma samples are wet-digested and solutions are aspirated into a conventional nitrous oxide-acetylene flame. Analyte emission is monitored at 396.15 nm with corrections for background emission being obtained from measurements several tenths nm on both sides of the aluminium line. The mean recovery of 0.3–5 μg/ml aluminium added to model solutions containing 500–5000 μg Na/ml, 50–1000 μg Ca/ml, 2000–5000 μg K/ml, or simulated plasma digests containing Na, K, and Ca was 100,6% (SD = 10.9, df = 60); the mean recovery of 0.3, 0.5, and 1.0 μg/ml aluminium added to blood plasma before digestion was 94.3% (SD = 9.8, df = 33) indicating no serious interferences. For standard solutions, the detection limit (signal: peak-to-peak noise = 1) was 0.02 μg/ml by flame emission, and 0.12 μg/ml by atomic absorption measurements with the same instrument. A sample taken through the analytical procedure, gave a detection limit of 0.05 μg/ml suggesting the submicrogram per milliliter region as the lower practical limit of the method.     

Synchronous spectrofluorometric methods for simultaneous determination of diphenhydramine and ibuprofen or phenylephrine in combined pharmaceutical preparations

Simple and rapid synchronous fluorometric methods were adopted and validated for the simultaneous analysis of a binary mixture of diphenhydramine (DIP) and ibuprofen (IBU) ( Mix I) or DIP and phenylephrine (PHE) (Mix II) in their co‐formulated pharmaceuticals without prior separation. Analysis of Mix I is based on the measurement of the peak amplitudes (D¹) of synchronous fluorescence intensities at 265.1 nm for DIP and 260 nm for IBU. The relationship between the concentration and the amplitude of the first‐derivative synchronous fluorescence spectra showed good linearity over the concentration ranges 0.50–10.00 μg ml^?1 and 0.50–7.90 μg ml^?1 for DIP and IBU, respectively. Analysis of Mix II was based on measurement of the peak amplitude (D¹) synchronous fluorescence intensities at 230 nm for DIP and at 253.9 nm for PHE. Moreover, for Mix II, the peak amplitude (D²) synchronous fluorescence intensities were measured at 227.9 nm for DIP and at 264.9 nm for PHE. Calibration plots were rectilinear over the concentration range 0.30–3.50 μg ml^?1 and 0.03–0.75 μg ml^?1 for DIP and PHE, respectively. The proposed methods were successfully applied to determine the studied compounds in pure form and in pharmaceutical preparations.     

High-performance liquid chromatographic determination of hydrocortisone and methylprednisolone and their hemisuccinate esters in human serum

A high-performance liquid chromatographic method is described for the simultaneous determination of methylprednisolone (MP) and methylprednisolone hemisuccinate (MPHS), or hydrocortisone (HC) and hydrocortisone hemisuccinate (HCHS) in human serum. Reversed-phase liquid chromatography was performed on a microparticulate C₁₈ column (Spherisorb, 5 μm) using a mobile phase of 2% glacial acetic acid, 30–35% acetonitrile, 70–65% water with ultraviolet detection (254 nm). The method uses 17α-hydroxyprogesterone as the internal standard for the determination of methylprednisolone and its hemisuccinate ester, or 11-deoxy-17-hydroxycorticosterone as the internal standard for the determination of hydrocortisone and its hemisuccinate ester. The sensitivity is 0.03 μg/ml for HC, 0.07 μg/ml for MP, 0.04 μg/ml for MPHS, and 0.10 μg/ml for HCHS, with a detection limit of 0.02 μg/ml for all four steroids. Calibration curves are linear up to 3 μg/ml for MP or MPHS (as equivalent MP) and up to 4 μg/ml for HC and 7 μg/ml (as equivalent HC) for HCHS. The pooled relative standard deviation for replicate samples for each steroid is < 7%. Plasma concentration—time curves are reported for MP and MPHS or HC and HCHS of two human subjects following intramuscular administration of 125 mg of methylprednisolone sodium succinate for injection, U.S.P., or 250 mg of hydrocortisone sodium succinate for injection, U.S.P.     

Fast concurrent determination of guaifenesin and pholcodine in formulations and spiked plasma using first derivative synchronous spectrofluorimetric approach

Guaifenesin and pholcodine are frequently co-formulated in certain dosage forms. A new fast first derivative synchronous spectrofluorometric method has been used for their simultaneous analysis in mixtures. Here, first derivative synchronous spectrofluorometry enabled the successful simultaneous estimation of guaifenesin at 283 nm and pholcodine at 275 nm using a wavelength difference (Δλ) of 40 nm. The method was fully validated following International Council of Harmonization guidelines. For guaifenesin and pholcodine, linearity was determined within the corresponding ranges of 0.05–0.30 and 0.10–6.0 μg/ml. The two drugs were effectively analyzed using the developed approach in their respective formulations, and the results showed good agreement with those attained using reference methods. The method demonstrated excellent sensitivity, with detection limits down to 0.007 and 0.030 μg/ml and quantitation limits of 0.020 and 0.010 μg/ml for guaifenesin and pholcodine, respectively. Therefore, the procedure was successful in determining these drugs simultaneously in vitro in spiked plasma samples and syrup dosage form. The developed methodology also offered an environmentally friendly advantage by utilizing water as the optimal diluting solvent throughout the whole work. Different greenness approaches were investigated to ensure the method’s ecofriendly properties.