CsI‐Antisolvent Adduct Formation in All‐Inorganic Metal Halide Perovskites

The excellent optoelectronic properties demonstrated by hybrid organic/inorganic metal halide perovskites are all predicated on precisely controlling the exact nucleation and crystallization dynamics that occur during film formation. In general, high‐performance thin films are obtained by a method commonly called solvent engineering (or antisolvent quench) processing. The solvent engineering method removes excess solvent, but importantly leaves behind solvent that forms chemical adducts with the lead‐halide precursor salts. These adduct‐based precursor phases control nucleation and the growth of the polycrystalline domains. There has not yet been a comprehensive study comparing the various antisolvents used in different perovskite compositions containing cesium. In addition, there have been no reports of solvent engineering for high efficiency in all‐inorganic perovskites such as CsPbI₃. In this work, inorganic perovskite composition CsPbI₃ is specifically targeted and unique adducts formed between CsI and precursor solvents and antisolvents are found that have not been observed for other A‐site cation salts. These CsI adducts control nucleation more so than the PbI₂–dimethyl sulfoxide (DMSO) adduct and demonstrate how the A‐site plays a significant role in crystallization. The use of methyl acetate (MeOAc) in this solvent engineering approach dictates crystallization through the formation of a CsI–MeOAc adduct and results in solar cells with a power conversion efficiency of 14.4%.     

A Smooth CH3NH3PbI3 Film via a New Approach for Forming the PbI2 Nanostructure Together with Strategically High CH3NH3I Concentration for High Efficient Planar‐Heterojunction Solar Cells

The photovoltaic performance of perovskite solar cells (PVSCs) is extremely dependent on the morphology and crystallization of the perovskite film, which is affected by the deposition method. In this work, a new approach is demonstrated for forming the PbI₂ nanostructure and the use of high CH₃NH₃I concentration which are adopted to form high‐quality (smooth and PbI₂ residue‐free) perovskite film with better photovoltaic performances. On the one hand, self‐assembled porous PbI₂ is formed by incorporating small amount of rationally chosen additives into the PbI₂ precursor solutions, which significantly facilitate the conversion of perovskite without any PbI₂ residue. On the other hand, by employing a relatively high CH₃NH₃I concentration, a firmly crystallized and uniform CH₃NH₃PbI₃ film is formed. As a result, a promising power conversion efficiency of 16.21% is achieved in planar‐heterojunction PVSCs. Furthermore, it is experimentally demonstrated that the PbI₂ residue in perovskite film has a negative effect on the long‐term stability of devices.     

Aerosol‐Jet‐Assisted Thin‐Film Growth of CH3NH3PbI3 Perovskites—A Means to Achieve High Quality,Defect‐Free Films for Efficient Solar Cells

A high level of automation is desirable to facilitate the lab‐to‐fab process transfer of the emerging perovskite‐based solar technology. Here, an automated aerosol‐jet printing technique is introduced for precisely controlling the thin‐film perovskite growth in a planar heterojunction p–i–n solar cell device structure. The roles of some of the user defined parameters from a computer‐aided design file are studied for the reproducible fabrication of pure CH₃NH₃PbI₃ thin films under near ambient conditions. Preliminary power conversion efficiencies up to 15.4% are achieved when such films are incorporated in a poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate‐perovskite‐phenyl‐C71‐butyric acid methyl ester type device format. It is further shown that the deposition of atomized materials in the form of a gaseous mist helps to form a highly uniform and PbI₂ residue‐free CH₃NH₃PbI₃ film and offers advantages over the conventional two‐step solution approach by avoiding the detrimental solid–liquid interface induced perovskite crystallization. Ultimately, by integrating full 3D motion control, the fabrication of perovskite layers directly on a 3D curved surface becomes possible. This work suggests that 3D automation with aerosol‐jet printing, once fully optimized, could form a universal platform for the lab‐to‐fab process transfer of solution‐based perovskite photovoltaics and steer development of new design strategies for numerous embedded structural power applications.     

Impact of Monovalent Cation Halide Additives on the Structural and Optoelectronic Properties of CH3NH3PbI3 Perovskite

The influence of monovalent cation halide additives on the optical, excitonic, and electrical properties of CH₃NH₃PbI₃ perovskite is reported. Monovalent cation halide with similar ionic radii to Pb²⁺, including Cu⁺, Na⁺, and Ag⁺, have been added to explore the possibility of doping. Significant reduction of sub‐bandgap optical absorption and lower energetic disorder along with a shift in the Fermi level of the perovskite in the presence of these cations has been observed. The bulk hole mobility of the additive‐based perovskites as estimated using the space charge limited current method exhibits an increase of up to an order of magnitude compared to the pristine perovskites with a significant decrease in the activation energy. Consequentially, enhancement in the photovoltaic parameters of additive‐based solar cells is achieved. An increase in open circuit voltage for AgI (≈1.02 vs 0.95 V for the pristine) and photocurrent density for NaI‐ and CuBr‐based solar cells (≈23 vs 21 mA cm^?2 for the pristine) has been observed. This enhanced photovoltaic performance can be attributed to the formation of uniform and continuous perovskite film, better conversion, and loading of perovskite, as well as the enhancement in the bulk charge transport along with a minimization of disorder, pointing towards possible surface passivation.     

Highly Efficient and Stable Solar Cells with 2D MA3Bi2I9/3D MAPbI3 Heterostructured Perovskites

Organic–inorganic hybrid lead halide perovskites are emerging as highly promising candidates for highly efficient thin film photovoltaics due to their excellent optoelectronic properties and low‐temperature process capability. However, the long‐term stability in ambient air still is a key issue limiting their further practical applications. Herein, the enhancement of both performance and stability of perovskite solar cells is reported by employing 2D and 3D heterostructured perovskite films with unique nanoplate/nanocrystalline morphology. The 2D/3D heterostructured perovskites combine advantages of the high‐performance lead‐based perovskite 3D CH₃NH₃PbI₃ (MAPbI₃) and the air‐stable bismuth‐based quasi‐perovskite 2D MA₃Bi₂I₉. In the 2D/3D heterostructure, the hydrophobic MA₃Bi₂I₉ platelets vertically situate between the MAPbI₃ grains, forming a lattice‐like structure to tightly enclose the 3D MAPbI₃ perovskite grains. The solar cell based on the optimal 2D/3D (9.2%) heterostructured film achieves a high efficiency of 18.97%, with remarkably reduced hysteresis and significantly improved stability. The work demonstrates that construction of 2D/3D heterostructured films by hybridizing different species of perovskite materials is a feasible way to simultaneously enhance both efficiency and stability of perovskite solar cells.     

Modified PEDOT Layer Makes a 1.52 V Voc for Perovskite/PCBM Solar Cells

The work functions for charge transport layers in perovskite solar cells affect device performance significantly. In this work, the regular poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) is modified by adding a polymer electrolyte PSS‐Na to improve its HTL function in perovskite solar cells. The modified PEDOT:PSS films (called m‐PEDOT:PSS) possess higher work function than the regular one. Its energy level matches the valence band of perovskite very well, leading to enhanced V_oc and PCE (power conversion efficiency). When CH₃NH₃PbI₃ is used as the light absorber, the cell with PEDOT:PSS HTL gives a V_oc of 0.96 V and a PCE of 12.35%, while the cell with m‐PEDOT:PSS layer gives a V_oc of 1.11 V and a PCE of 15.56%. Enhanced V_oc and PCE are also achieved when CH₃NH₃PbI₂Br or CH₃NH₃PbBr₃ is used as the light absorber. The m‐PEDOT:PSS/CH₃NH₃PbBr₃/PC₆₁BM solar cells demonstrate an outstanding V_oc of 1.52 V.     

High‐Performance Perovskite Solar Cells with Enhanced Environmental Stability Based on a (p‐FC6H4C2H4NH3)2[PbI4] Capping Layer

Supported by the density functional theory (DFT) calculations, for the first time, a fluorinated aromatic cation, 2‐(4‐fluorophenyl)ethyl ammonium iodide (FPEAI), is introduced to grow in situ a low dimensional perovskite layer atop 3D perovskite film with excess PbI₂. The resulted (p‐FC₆H₄C₂H₄NH₃)₂[PbI₄] perovskite functions as a protective capping layer to protect the 3D perovskite from moisture. In the meantime, the thin layer facilitates charge transfer at the interfaces, thereby reducing the nonradiative recombination pathways. Laser scanning confocal microscopy unveils visually the distribution of the 2D perovskite layer on top of the 3D perovskite. When employing the 3D–2D perovskite as the absorbing layer in the photovoltaic cells, a high power conversion efficiency of 20.54% is realized. Superior device performance and moisture stability are observed with the modified perovskite over the whole stability test period.     

Efficient and Stable Chemical Passivation on Perovskite Surface via Bidentate Anchoring

Chemical passivation is an effective approach to suppress the grain surface dominated charge recombination in perovskite solar cells (PSCs). However, the passivation effect is usually labile on perovskite crystal surface since most passivating agents are weakly anchored. Here, the use of a bidentate molecule, 2‐mercaptopyridine (2‐MP), to increase anchoring strength for improving the passivation efficacy and stability synchronously is demonstrated. Compared to monodentate counterparts of pyridine and p‐toluenethiol, 2‐MP passivation on CH₃NH₃PbI₃ film results in twofold improvement of photoluminescence lifetime and remarkably enhanced tolerance to chlorobenzene washing and vacuum heating, which improve the power conversion efficiency of n–i–p planar structured PSCs from 18.35% to 20.28%, with open‐circuit voltage approaching 1.18 V. Moreover, the CH₃NH₃PbI₃ films passivated with 2‐MP exhibit unprecedented humid‐stability that they can be exposed to saturated humidity for at least 5 h, mainly due to the passivation induced surface deactivation, which renders the unencapsulated devices retaining 93% of the initial efficiency after 60 days aging in air with relative humidity of 60–70%.     

Tailoring Triple‐Anion Perovskite Material for Indoor Light Harvesting with Restrained Halide Segregation and Record High Efficiency Beyond 36%

Indoor photovoltaics are promising to enable self‐powered electronic devices for the Internet of Things. Here, reported is a triple‐anion CH₃NH₃PbI_2?xBrCl_x perovskite film, of which the bandgap is specially designed for indoor light harvesting to achieve a record high efficiency of 36.2% with distinctive high open circuit voltage (V_oc) of 1.028 V under standard 1000 lux fluorescent light. The involvement of both bromide and chloride suppresses the trap‐states and nonradiative recombination loss, exhibiting a remarkable ideality factor of 1.097. The introduction of chloride successfully restrains the halide segregation of iodide and bromide, stabilizing the triple‐anion perovskite film. The devices show an excellent long‐term performance, sustaining over 95% of original efficiency under continuous light soaking over 2000 h. These findings show the importance and potential of I/Br/Cl triple‐anion perovskite with tailored bandgap and suppressed trap‐states in stable and efficient indoor light recycling.     

Aquointermediate Assisted Highly Orientated Perovskite Thin Films toward Thermally Stable and Efficient Solar Cells

The stability of single‐crystalline/monocrystalline‐like perovskite film is expected to be better than its microcrystalline counterparts. In the present work, highly orientated perovskite thin films (CH₃NH₃PbI_3–xCl_x) are prepared by means of aquointermediates assisted solution process. It displays super‐duper preferred‐orientation along <110> direction that is close to the single crystal, and its diffraction intensity ratio of (110)/(310) is nearly two orders of magnitude higher in contrast to the films that prepared by traditional way. Owing to its superior performances, e.g., highly crystallized quality, stress‐free inside films, longer electron lifetime, faster temporal response time, etc., the highly orientated perovskite‐based solar cells accordingly allow realizing high efficiency while improving its thermal stability.     

Nonhazardous Solvent Systems for Processing Perovskite Photovoltaics

Replacing toxic solvents with nonhazardous solvents is one of the key challenges for industrial scale commercialization of thin film perovskite photovoltaics. Here, nonhazardous solvent/alcohol/acid systems are presented for the single‐step deposition of pinhole‐free perovskite layers with combined lead halide precursors of Pb(CH₃CO₂)₂·3H₂O, PbCl₂, and CH₃NH₃I. Comparable performance to standard hazardous inks is achieved: devices with 15.1% power conversion efficiency are demonstrated and maintain 13.5% tracked for 5 min at maximum power point. Blade coated 4 cm² solar modules fabricated with highest performing device ink attain 11.9% in power conversion efficiency.     

Highly stable and Efficient Perovskite Solar Cells Based on FAMA‐Perovskite‐Cu:NiO Composites with 20.7% Efficiency and 80.5% Fill Factor

To solve critical issues related to device stability and performance of perovskite solar cells (PSCs), FA_0.026MA_0.974PbI_3?yCl_y‐Cu:NiO (formamidinium methylammonium (FAMA)‐perovskite‐Cu:NiO) and Al₂O₃/Cu:NiO composites are developed and utilized for fabrication of highly stable and efficient PSCs through fully‐ambient‐air processes. The FAMA‐perovskite‐Cu:NiO composite crystals prepared without using any antisolvents not only improve the perovskite film quality with large‐size crystals and less grain boundaries but also tailor optical and electronic properties and suppress charge recombination with reduction of trap density. A champion device based on the composites as light absorber and Al₂O₃/Cu:NiO interfacial layer between electron transport layer and active layer yields power conversion efficiency (PCE) of 20.67% with V_OC of 1.047 V, J_SC of 24.51 mA cm^?2, and fill factor of 80.54%. More importantly, such composite‐based PSCs without encapsulation show significant enhancement in long‐term air‐stability, thermal‐ and photostability with retaining 97% of PCE over 240 d under ambient conditions (25–30 °C, 45–55% humidity).     

Lessons Learnt from Spatially Resolved Electro‐ and Photoluminescence Imaging: Interfacial Delamination in CH3NH3PbI3 Planar Perovskite Solar Cells upon Illumination

The influence of illumination on the long‐term performance of planar structured perovskite solar cells (PSCs) is investigated using fast and spatially resolved luminescence imaging. The authors analyze the effect of illuminated current density–voltage (J–V) and light‐soaking measurements on pristine PSCs by providing visual evidence for the spatial inhomogeneous evolution of device performance. Regions that are exposed to light initially produce stronger electroluminescence signals than surrounding unilluminated regions, mainly due to a lower contact resistance and, possibly, higher charge collection efficiency. Over a period of several days, however, these initially illuminated regions appear to degrade more quickly despite the device being stored in a dark, moisture‐ and oxygen‐free environment. Using transmission electron microscopy, this accelerated degradation is attributed to delamination between the perovskite and the titanium dioxide (TiO₂) layer. An ion migration mechanism is proposed for this delamination process, which is in accordance with previous current–voltage hysteresis observations. These results provide evidence for the intrinsic instability of CH₃NH₃PbI₃‐based devices under illumination and have major implications for the design of PSCs from the standpoint of long‐term performance and stability.     

Efficient and Highly Air Stable Planar Inverted Perovskite Solar Cells with Reduced Graphene Oxide Doped PCBM Electron Transporting Layer

Reduced graphene oxide (rGO) is added in the [6,6]‐Phenyl‐C61‐butyric acid methyl ester (PCBM) electron transport layer (ETL) of planar inverted perovskite solar cells (PSCs), resulting in a power conversion efficiency (PCE) improvement of ≈12%, with a hysteresis‐free PCE of 14.5%, compared to 12.9% for the pristine PCBM based device. The universality of the method is demonstrated in PSCs based on CH₃NH₃PbI_3?x Cl_x and CH₃NH₃PbI₃ perovskites, deposited through one step and two step spin coating process, respectively. After a comprehensive spectroscopic characterization of both devices, it is clear that the introduction of rGO in PCBM ETL results in an important increase of the ETL conductivity, together with reduced series resistance and surface roughness. As a result, a significant photoluminescence quenching of such perovskite/ETL is observed, confirming the increased measured short circuit current density. Transient absorption measurements reveal that in the rGO‐based device, the relaxation process of the excited electrons is significantly faster compared to the reference, which implies that the charge injection rate is significantly faster for the first. Furthermore, the light soaking effect is significantly reduced. Finally, aging measurements reveal that the rGO stabilizes the ELT/perovskite interface, which results in the stabilization of perovskite crystal structure after prolonged illumination.     

Electrospray‐Assisted Fabrication of Moisture‐Resistant and Highly Stable Perovskite Solar Cells at Ambient Conditions

An electrospray deposition technique to fabricate a perovskite (CH₃NH₃PbI₃) layer for highly stable and efficient perovskite solar cells at ambient humidity (30%–50% relative humidity) conditions is demonstrated. A detailed study is conducted to determine the effect of different electrospray parameters on the device performance and to provide a mechanistic explanation of the superior stability of the films. Due to the controlled reactivity that results in the formation of a smooth perovskite film, these cells exhibit stability exceeding 4000 h, in contrast to much lower stability of those fabricated by conventional spin coating methods. Furthermore, the perovskite film deposited by electrospray methods exhibits a self‐healing behavior when exposed to moisture. The authors hypothesize the formation of an intermediate metastable phase and smooth morphology of the film as the reason for this enhanced stability. Electrospray is a scalable technique that provides precise control over the amount of material required for deposition, reducing significant material loss that occurs in conventional solution‐based methods. Overall, this work shows that stability of perovskite solar cells can be improved by fabrication using a well controlled and optimized electrospray technique, without the use of any additives or cell encapsulants.     

Improving Film Formation and Photovoltage of Highly Efficient Inverted‐Type Perovskite Solar Cells through the Incorporation of New Polymeric Hole Selective Layers

Two chemically tailored new conjugated copolymers, HSL1 and HSL2, were developed and applied as hole selective layers to improve the anode interface of fullerene/perovskite planar heterojunction solar cells. The introduction of polar functional groups on the polymer side chains increases the surface energy of the hole selective layers (HSLs), which promote better wetting with the perovskite films and lead to better films with full coverage and high crystallinity. The deep highest occupied molecular orbital levels of the HSLs align well with the valence band of the perovskite semiconductors, resulted in increase photovoltage. The high lying lowest unoccupied molecule orbital level provides sufficient electron blocking ability to prevent electrons from reaching the anode and reduces the interfacial trap‐assisted recombination at the poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/perovskite interface, resulting in a longer charge‐recombination lifetime and shorter charge‐extraction time. In the presence of the HSLs, high‐performance CH₃NH₃PbI _x Cl_{3? x} perovskite solar cells with a power conversion efficiency (PCE) of 16.6% (V _oc: 1.07 V) and CH₃NH₃Pb(I_0.3Br_0.7) _x Cl_{3? x} cells with a PCE of 10.3% (V _oc: 1.34 V) can be realized.     

Enhanced Light Harvesting in Perovskite Solar Cells by a Bioinspired Nanostructured Back Electrode

Light management holds great promise of realizing high‐performance perovskite solar cells by improving the sunlight absorption with lower recombination current and thus higher power conversion efficiency (PCE). Here, a convenient and scalable light trapping scheme is demonstrated by incorporating bioinspired moth‐eye nanostructures into the metal back electrode via soft imprinting technique to enhance the light harvesting in organic–inorganic lead halide perovskite solar cells. Compared to the flat reference cell with a methylammonium lead halide perovskite (CH₃NH₃PbI_3?x Cl_x ) absorber, 14.3% of short‐circuit current improvement is achieved for the patterned devices with moth‐eye nanostructures, yielding an increased PCE up to 16.31% without sacrificing the open‐circuit voltage and fill factor. The experimental and theoretical characterizations verify that the cell performance enhancement is mainly ascribed by the broadband polarization‐insensitive light scattering and surface plasmonic effects due to the patterned metal back electrode. It is noteworthy that this light trapping strategy is fully compatible with solution‐processed perovskite solar cells and opens up many opportunities toward the future photovoltaic applications.     

In Situ Study of Purified Phase Transition Path for α-FAPbI3 Crystallization

Phase transition during annealing in the two-step sequential deposition has drawn intensive attention as its significance in fabricating superior perovskite films. However, previous works have not paid enough attention to the importance of the purified phase transition path in the crystallization process. Herein, different from the mixed paths in the conventional cognition, purified phase transition path for α-FAPbI₃ crystallization is achieved by introducing dimethylurea (DMU) into lead iodide (PbI₂) precursor solution. The multifunctional molecule is found to design a penetrable porous PbI₂ film and fundamentally regulate the perovskite crystallization by forming single phase transition path via the complete δ-phase during annealing of perovskite. The role of DMU in purified transition path for α-FAPbI₃ crystallization is unraveled with in situ photoluminescence and grazing incidence wide-angle x-ray scattering (GIWAXS) investigation. The crystal quality of perovskite films is significantly improved, resulting in single crystal-like film. The best-performing perovskite solar cells (PSCs) deliver a power conversion efficiency of 24.75%, resulting from the higher FF of 83.25% and an improved long-term stability up to 3600 h. This work highlights the importance of purified phase transition path for the superior crystal quality toward high-performance perovskite photovoltaics.     

Highly Efficient and Stable Perovskite Solar Cells Based on Monolithically Grained CH3NH3PbI3 Film

The synthesis and growth of perovskite films with controlled crystallinity and microstructure for highly efficient and stable solar cells is a critical issue. In this work, thiourea is introduced into the CH₃NH₃PbI₃ precursor with two‐step sequential ethyl acetate (EA) interfacial processing. This is shown for the first time to grow compact microsized and monolithically grained perovskite films. X‐ray diffraction patterns and infrared spectroscopy are used to prove that thiourea significantly impacts the perovskite crystallinity and morphology by forming the intermediate phase MAI·PbI₂·S?C(NH₂)₂. Afterward, the residual thiourea which coursed charge recombination is completely extracted by the sequential EA processing. The product has improved light harvesting, suppressed defect state, and enhanced charge separation and transport. The sequentially EA processed perovskite solar cells offer an impressive 18.46% power conversion efficiency and excellent stability in ambient air. More importantly, the EA postprocessed perovskite solar cells also have excellent voltage response under ultraweak light (0.05% sun) with promising utility in photodetectors and photoelectric sensors.     

Alternative Perovskites for Photovoltaics

The discovery of unique optoelectronic properties of 3D ABX₃ perovskites has produced a great impact on the field of photovoltaics. In the initial years after the breakthrough, interest has focused on a limited number of 3D ABX₃ perovskite materials, including the archetypal CH₃NH₃PbI₃ and its counterparts. Undoubtedly, the main limitation of perovskite devices is their low stability due the fast degradation of the perovskite layer; however, the high toxicity of Pb also poses a concern. Herein, the recent increasing number of articles reporting the theoretical modeling, synthesis, optoelectronic characterization, and implementation of alternative perovskite materials in solar devices is summarized. The extensive variety of perovskite derivatives is classified according to the material dimensionality and the crystal structure. The particular strengths and weaknesses for each novel material are discussed, and the device performance and potential stability enhancements are also highlighted.