Investigations into spectroscopic and optoelectronic behaviour of furoic acid-based Eu(III) complexes for advanced photonic applications

To illuminate the zone of organic light-emitting diodes, a novel series of four red luminescent europium complexes, one binary (C1) and three ternary (C2–C4), of 5-phenyl 2-furoic acid was synthesized with 2,2′-bipyridyl (bipy), bathophenanthroline (batho) and 1,10-phenanthroline (phen) as ancillary ligands and characterized by adopting various analytical techniques. All the findings of energy-dispersive X-ray spectroscopy, elemental (CHN) analysis, Fourier transform infrared, nuclear magnetic resonance, and ultraviolet–visible spectroscopy confirmed the coordination of ligand binding sites with the europium ion. To evaluate the thermal stability, thermogravimetric/difference thermogravimetric measurements were taken that revealed that the synthesized complexes were stable up to 245°C. Diffused reflectance studies indicated that these complexes had potential for their use in wide band-gap semiconductors, as all the four complexes showed metal-centred luminescence as a characteristic red emission peak that was observed at 613 nm under the excitation wavelength of 330 nm. The internal quantum efficiencies and luminescence lifetime of complexes were predicted using Judd–Ofelt and photophysical data. The monoexponential luminescence decay and Judd–Ofelt analysis suggested the presence of a single and asymmetric chemical environment in the coordination sphere of the europium metal. Commission International de l'Eclairage colour coordinates, correlated colour temperature values, and colour purity of the complexes validated their red emission in the visible region.     

Optical,emission, and excitation dynamics of Eu3+-doped bismuth-based phosphate glass for visible display laser applications

Eu³⁺-doped-bismuth-based phosphate glasses with chemical equation (60 − x)P₂O₅–20Bi₂O₃−10Na₂CO₃–10SrF₂–xEu₂O₃ (PBNSEu), (where x = 0, 0.1, 0.5, 1.0, 1.5 and 2 mol%) were fabricated using the melt-quenching method. Obtain X-ray diffraction (XRD), energy-dispersive X-ray (EDAX), and Fourier transform infrared (FTIR) spectra were used to characterize the structure of the prepared PBNSEu glass. The J–O (Judd–Ofelt) intensity parameters (Ω₂, Ω₄) were estimated using photoluminescence emission spectra. When excited with a xenon lamp at λ_exc = 394 nm, the most intense red-emission transition occurred at ~612 nm (⁵D₀→⁷F₂). J–O intensity parameters were used to calculate radiative properties, whereas the radiative branching ratio (β_R), radiative transition probability (A_R), radiative lifetime (τ_R), and total radiative transition rate (A_τ) were calculated for the transitions ⁵D₀→⁷F_J (where J = 0–4) and were obtained in the emission spectra for europium ion-doped in the current glass. Using the CIE1931 chromaticity coordinates axes, the colours of various concentrations of Eu³⁺ ion-doped PBNS glass were evaluated using the emission spectra. Temperature-dependent luminescence spectra were recorded for the optimized PBNSEu20 glass to calculate the activation energy. These results strongly suggested red components in w-LEDs and visible display laser applications.     

Spectral investigations on Eu3+,Sm3+‐doped and Sm3+/Eu3+ co‐doped potassium‐fluoro‐phosphate glass emitting intense orange‐red for lighting applications

Potassium fluoro‐phosphate (KFP) glass singly doped with different concentrations of europium (Eu³⁺) or samarium (Sm³⁺) or co‐doped (Sm³⁺/Eu³⁺) was prepared, and their luminescence spectra were investigated. The phase composition of the product was verified by X‐ray diffraction analysis. Optical transition properties of Eu³⁺ in the studied potassium phosphate glass were evaluated in the framework of the Judd–Ofelt theory. The radiative transition rates (A_R), fluorescence branching ratios (β), stimulated emission cross‐sections (σ_e) and lifetimes (τ_exp) for certain transitions or levels were evaluated. Red emission of Eu³⁺ was exhibited mainly by the ⁵D₀→⁷F₂ transition located at 612 nm. Concentration quenching and energy transfer were observed from fluorescence spectra and decay curves, respectively. It was found that the lifetimes of the ⁵D₀ level increased with increase in concentration and then decreased. By co‐doping with Sm³⁺, energy transfer from Sm³⁺ to Eu³⁺ occurred and contributed to the enhancement in emission intensity. Intense orange‐red light emission was obtained upon sensitizing with Sm³⁺ in KFP glass. This approach shows significant promise for use in reddish‐orange lighting applications. The optimized properties of the Sm³⁺/Eu³⁺ co‐doped potassium phosphate glass might be promising for optical materials.     

Designing and Judd–Ofelt evaluation of versatile luminescent Eu (III) complexes sensitized with β-diketone ligand for multifarious applications

The present research work entails the synthesis of one binary and four ternary red light−emitting Eu (III)-based complexes with 3-benzylidene-2,4-pentanedione as the main ligand and 1,10-phenanthroline, bathophenanthroline, neocuproine, and 4,4′-′dimethyl-2,2′-′bipyridyl as auxiliary ligands. The metal–organic framework of the series was elucidated using energy dispersive X-ray analysis, elemental analysis, Fourier transform infrared spectroscopy, and proton nuclear magnetic resonance. This Eu (III) series exhibits optimum thermal stability, making them a promising candidate for organic light-emitting diodes. On the basis of emission spectra, their optical parameters such as nonradiative and radiative decay rates, luminescence decay time, intrinsic quantum efficiency, and Judd–Ofelt intensity parameter were determined. The monocentric luminescence and Judd–Ofelt parameters reveal the absence of symmetry around the europium center. CIE chromaticity coordinates, correlated color temperature values, color purity, and asymmetric ratios authenticate the color coordinates of the complexes in red region. Optical band gap values lie within the range of wide band gap semiconductors, indicating their utilization in military radars and biological labeling.     

Analysis of the structure and luminescence properties of Zn2GeO4:Eu3+ according to Judd–Ofelt theory

The preparation and characteristic of nanorod-like Zn₂GeO₄ doped with Eu³⁺ or zinc germanate (ZGO):xEu³⁺ (x = 0 ÷ 0.05), which was synthesized using the hydrothermal method, are described. The influence of Eu³⁺-doping ions on the structure and the optical properties of ZGO was also investigated. According to the photoluminescence spectra, ZGO:xEu³⁺ nanophosphors gave a red emission due to the ⁵D₀→⁷F₂ emission of Eu³⁺ ions. In accordance with Judd–Ofelt theory, the intensity parameters for f–f transitions from the emission and absorption spectrum were determined. At the ⁵D₀ excited state of Eu³⁺, total spontaneous emission probabilities (A_R), lifetimes (τ_R), branching ratios (β_R), and quantum efficiency (η) were calculated. The ZGO:xEu³⁺ (x = 0.02, 0.03, 0.04) phosphor showed the branch ratio β (⁵D₀→⁷F₂) > 60%, indicating that the phosphors prepared here have a promising potential as laser light. The sample with a concentration of 0.04Eu³⁺ achieved the highest quantum efficiency of 84%, suggesting that it has potential light-emitting diode applications.     

Synthesis and photoluminescence properties of red emitting phosphor La2–xEuxLi0.5Al0.5O4 [x = 0.2–2] with K2NiF4 structure

Europium (Eu)³⁺‐substituted La₂Li_0.5Al_0.5O₄ red emitting phosphors were prepared by a conventional high‐temperature solid‐state reaction method. Powder X‐ray diffraction, diffuse reflectance spectra and spectrofluorometry were used as vital characterizing tools for the phosphors. The Eu concentration dependence luminescence properties and Judd–Ofelt intensity parameters were investigated and calculated, respectively. All compositions showed an orange red emission (due to the magnetic and electric dipole transitions of the Eu³⁺ ion) with the appropriate Commission Internationale de l'Eclairage (CIE) colour gamut under near ultraviolet or blue ray light excitation. The calculated critical distance showed that the energy transfer occured between Eu to Eu via an exchange mechanism. The Eu_1.4La_0.6Li_0.5Al_0.5O₄ composition showed the highest red emission intensity with CIE colour saturation compared with that of the commercial Eu‐activated yttrium oxysulfide red phosphor.     

Improving green emission of Tb3+ ions in BaO‐B2O3‐P2O5 glasses by means of Al3+ ions

BaO‐B₂O₃‐P₂O₅ glasses doped with a fixed concentration of Tb³⁺ ions and varying concentrations of Al₂O₃ were synthesized, and the influence of the Al³⁺ ion concentration on the luminescence efficiency of the green emission of Tb³⁺ ions was investigated. The optical absorption, excitation, luminescence spectra and fluorescence decay curves of these glasses were recorded at ambient temperature. The emission spectra of terbium ions when excited at 393 nm exhibited two main groups of bands, corresponding to ⁵D₃ → ⁷F_j (blue region) and ⁵D₄ → 7F_j (green region). From these spectra, the radiative parameters, viz., spontaneous emission probability A, total emission probability A_T, radiative lifetime τ and fluorescent branching ratio β, of different transitions originating from the ⁵D₄ level of Tb³⁺ ions were evaluated based on the Judd‐Ofelt theory. A clear increase in the quantum efficiency and luminescence of the green emission of Tb³⁺ ions corresponding to ⁵D₄ → ⁷F₅ transition is observed with increases in the concentration of Al₂O₃ up to 3.0 mol%. The improvement in emission is attributed to the de‐clustering of terbium ions by Al³⁺ ions and also to the possible admixing of wave functions of opposite parities. Copyright © 2016 John Wiley & Sons, Ltd.     

Low temperature-synthesized MgAl2O4:Eu3+ nanophosphors and their structural validations using density functional theory: photoluminescence,photocatalytic, and electrochemical properties for multifunctional applications

A low temperature-assisted and oxalyl dihydrazide fuel-induced combustion synthesized series of uncalcined MgAl₂O₄:Eu³⁺ nanophosphors showed an average crystallite size of ~20 nm, and bandgap energy (E_g) of 4.50–5.15 eV, and were validated using density functional theory and found to match closely with the experimental values. The photoluminescence characteristic emission peaks of Eu³⁺ ions were recorded between 480 and 680 nm. The nanophosphors excited at 392 nm showed f–f transitions assigned as ⁵D₀→⁷F_J (J = 0, 1, 2, and 3). The optimized MgAl₂O₄ phosphors had Commission Internationale de l'Eclairage coordinates in the red region, a correlated colour temperature of 2060 K, and a colour purity of 98.83%. The estimated luminescence quantum efficiency ( $\eta$) was observed to be ~63% using Judd–Ofelt analysis. Electrochemical and photocatalytic performance were explored and indicated its multifunctional applications. Therefore, MgAl₂O₄:Eu³⁺ nanophosphors could be used for the fabrication of light-emitting diodes, industrial dye degradation, and as electrodes for supercapacitor applications.     

Photoluminescence and structural analysis of trivalent europium doped MLaAl3O7 (M = Ba,Ca, Mg and Sr) nanophosphors

The solution combustion technique was used to synthesize MLaAl₃O₇ (M = Ba, Ca, Mg, and Sr) nanophosphors‐doped with Eu³⁺ using metal nitrates as precursors. The photoluminescence (PL) emission spectra exhibited three peaks at 587–591, 610–616, and 653–654 corresponding to ⁵D₀→⁷F₁, ⁵D₀→⁷F₂, and ⁵D₀→⁷F₃ transitions, respectively. Upon excitation at 254 nm, these nanophosphors displayed strong red emission with the dominant peak attributed to the ⁵D₀→⁷F₂ transition of Eu³⁺. The materials were further heated at 900 and 1050°C for 2 h to examine the consequence of temperature on crystal lattice and PL emission intensity. X‐ray diffraction (XRD) analysis proved that all the synthesized materials were of a crystalline nature. CaLaAl₃O₇ material has a tetragonal crystal structure with space group P421m. Scherer's equation was used to calculate the crystallite size of synthesized phosphors using XRD data. A Fourier transformation infrared study was used to observe the stretching vibrations of metal–oxygen bonds. Infrared peaks for stretching vibrations corresponding to lanthanum–oxygen and aluminium–oxygen bonds were found at 582 and 777 cm^–1 respectively for CaLaAl₃O₇ phosphor material. Transmission electron microscopy images were used to determine the size of particles (18–37 nm for the as‐prepared materials) and also to analyze the three‐dimensional view of these materials. The experimental data indicate that these materials may be promising red‐emitting nanophosphors for use in white light‐emitting diodes.     

Ho3+‐doped strontium–aluminium–bismuth–borate glasses for green light emission

Strontium–aluminium–bismuth–borate glasses (SAlBiB) doped with different concentrations of Ho³⁺ were prepared using conventional melt quenching technique and their structural and optical properties investigated. X‐ray diffraction and scanning electron microscopy analysis were used to study the structural properties. Optical properties were studied by measuring the optical absorption and visible luminescence spectra. The Judd–Ofelt (J‐O) theory was applied to evaluate J‐O intensity parameters, Ω_λ (λ = 2, 4 and 6). Using J‐O intensity parameters, radiative properties such as spontaneous transition probabilities (A_R), branching ratios (β_R) and radiative lifetimes (τ_R) were determined. From the emission spectra, a strong green emission nearly at 549 nm corresponding to the transition, ⁵S₂(⁵F₄)→⁵I₈ was observed. Emission peak positions (λ_P), effective bandwidths (Δλ_eff) and stimulated emission cross‐sections (σ_p) were calculated for the observed emission transitions, ⁵F₃→⁵I₈, ⁵S₂(⁵F₄)→⁵I₈ and ⁵F₅→⁵I₈ of Ho³⁺ in all the glass matrices. Chromaticity color coordinates were calculated using the emission spectra. The experimental results suggest that SAlBiB glass matrix with 1.5 mol% of Ho³⁺ has better emission properties. Copyright © 2014 John Wiley & Sons, Ltd.     

Intensity of cooperative vibronic transitions in the Eu(III), Gd(III) and Tb(III) formates spectra

The luminescence and absorption spectra of the lanthanide ions in solids and coordination compounds are characterized by sharp pure electronic lines, which are accompanied by much weaker lines of vibronic transitions. The vibronic spectroscopy is a good probing tool for investigations of the properties of surrounding ion ligands. The lanthanides formates are efficient luminescent crystals and can be viewed as the elementary type in the whole class of the oxygen-containing lanthanide coordination compounds. The intensity of vibronic transitions in spectra of luminescence and excitation europium (⁵D₀→⁷F₂, ⁷F₀→⁵D₂), terbium (⁷F₆→⁵D₄), gadolinium (⁶P_7/2→⁸S_7/2) in anhydrous formates of the type Ln(HCOO)₃ (Ln = Eu, Tb, Gd) and Y(HCOO)₃.2H₂O doped with Eu³⁺ and Tb³⁺ (C ~1 mol%) are reported. Also, the infrared and Raman spectra were obtained for the same compounds. Related integral intensity vibronic sidebands depend on the type of electronic transition of the same ion and varies for the same electronic transitions in different crystals. The obtained experimental data referring to the rate constants of vibronic transitions and intensity distribution in vibronic spectra on normal vibrations of the formate groups are in agreement with the predictions based on the Stavola–Dexter theory of cooperative vibronic transitions.     

Study of trivalent samarium ion embedded lithium‐based borate glass for high‐density optical memory devices

Sm³⁺ ions doped strontium lithium lead borate glasses (SLLB:Sm) were prepared using a conventional melt‐quenching technique. The glasses were analyzed using X‐ray diffractometry and Fourier transform infrared spectroscopy, optical absorption, fluorescence spectral analysis, and fluorescence lifetime decay. The Judd–Ofelt (J–O) parameters and radiative parameters of the SLLB:Sm10 glass (1.0 mol% Sm³⁺ ion‐doped glass) were calculated using J–O theory. From the emission spectra, among all the synthesized glass, SLLB:Sm10 glass had the highest emission intensity for ⁴G_5/2→⁶H_11/2 transition (610 nm). Emission parameters, such as stimulated emission cross‐section and optical gain bandwidth, were calculated. For all concentrations of Sm³⁺ ions, the decay profile showed an exponential nature and decreased when the Sm³⁺ ion concentration was increased due to a concentration quenching effect. This result suggests that the synthesized SLLB:Sm10 glass could be used for application in high‐density optical memory devices.     

Optical analysis of RE3+ (RE = Eu,Tb):MgLa2V2O9 nano-phosphors

Red and green rare-earth ion (RE³⁺) (RE = Eu, Tb):MgLa₂V₂O₉ micro-powder phosphors were produced utilizing a standard solid-state chemical process. The X-ray diffraction examination performed on the phosphors showed that they were crystalline and had a monoclinic structure. The particles grouped together, as shown in the scanning electron microscopy (SEM) images. Powder phosphors were examined using a variety of spectroscopic techniques, including photoluminescence (PL), Fourier-transform infrared, and energy dispersive X-ray spectroscopy. Brilliant red emission at 615 nm (⁵D₀ → ⁷F₂) having an excitation wavelength (λ_exci) of 396 nm (⁷F₀ → ⁵L₆) and green emission at 545 nm (⁵D₄ → ⁷F₅) having an λ_exci = 316 nm (⁵D₄ → ⁷F₂) have both been seen in the emission spectra of Tb³⁺:MgLa₂V₂O₉ nano-phosphors. The emission mechanism that is raised in Eu³⁺:MgLa₂V₂O₉ and Tb³⁺:MgLa₂V₂O₉ powder phosphors has been explained in an energy level diagram.     

Synthesis and photoluminescence properties of Eu3+‐activated Ba2Mg(PO4)2 phosphor

In this paper, we have reported the photoluminescence (PL) properties of the Ba₂Mg(PO₄)₂:Eu³⁺ phosphor synthesized using a wet chemical method. The preliminary scanning electron microscopy (SEM) investigation of the sample revealed irregular surface morphology with particle sizes in the 10–50 μm range. The strongest PL excitation peak was observed at 396 nm. The emission spectra indicated that this phosphor can be effectively excited by the 396 nm wavelength. Upon 396 nm excitation, the emission spectrum showed characteristics peaks located at 592 nm and 615 nm. These intense orange‐red emission peaks were obtained due to f→f transitions of Eu³⁺ ions. The emission peak at 592 nm is referred to as the magnetic dipole ⁵D₀→⁷F₁ transition and the emission peak at 615 nm corresponded to the electric dipole ⁵D₀→⁷F₂ transition of Eu³⁺. The Commission Internationale de l’Eclairage (CIE) coordinates of the Ba₂Mg(PO₄)₂:Eu³⁺ phosphor were found to be (0.586, 0.412) for wavelength 592 nm and (0.680, 0.319) for wavelength 615 nm situated at the edge of the CIE diagram, indicating high colour purity of phosphors. Due to the high emission intensity and a good excitation profile, Eu³⁺‐doped Ba₂Mg(PO₄)₂ phosphor may be a promising orange‐red phosphor candidate for solid‐state lighting applications.     

Eu3+‐doped polystyrene and polyvinylidene fluoride nanofibers made by electrospinning for photoluminescent fabric designing

Eu³⁺‐doped polystyrene and polyvinylidene fluoride (PVDF/Eu³⁺ and PS/Eu³⁺) nanofibers were made using electrospinning. These fibers were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT‐IR), energy dispersive spectroscopy (EDX) and photoluminescence (PL). Spectral analysis of PVDF/Eu³⁺ and PS/Eu³⁺ nanofibers was based on their emission spectra. A bright red emission was noticed from Eu³⁺ that was assigned to the hypersensitive ⁵D₀ → ⁷F₂ transition. The enhanced intensity ratios of ⁵D₀ → ⁷F₂ to ⁵D₀ → ⁷F₁ transitions in the nanofibers indicated a more polarized chemical environment for the Eu³⁺ ions and greater hypersensitivity for the ⁵D₀ → ⁷F₂ transition, which showed the potential for application in various polymer optoelectronic devices. The Eu³⁺‐doped polymer (PVDF/Eu³⁺ and PS/Eu³⁺) nanofibers are suitable for the photoluminescent white light fabric design of smart textiles. This paper focuses on the potential application of smart fabrics to address challenges in human life.     

Structural and luminescence properties of Sm3+‐doped bismuth phosphate glass for orange‐red photonic applications

In the present study, the effect of bismuth oxide (Bi₂O₃) content on the structural and optical properties of 0.5Sm³⁺‐doped phosphate glass and the effect of concentration on structural and optical properties of Sm³⁺‐doped bismuth phosphate (BiP) glass were studied. Structural characterization was accomplished using X‐ray diffraction (XRD), scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS), Fourier transform infrared (FTIR) spectroscopy and ³¹P nuclear magnetic resonance (NMR) spectroscopy. Optical properties were studied using absorption, photoluminescence and decay measurements. Using optical absorption spectra, Judd–Ofelt parameters were derived to determine the local structure and bonding in the vicinity of Sm³⁺ ions. The emission spectra of Sm³⁺‐doped BiP glass showed two intense emission bands, ⁴G_5/2→⁶H_7/2 (orange) and ⁴G_5/2→⁶H_9/2 (red) for which the stimulated emission cross‐sections (σ_e) and branching ratios (β) were found to be higher. The quantum efficiencies were also calculated from decay measurements recorded for the ⁴G_5/2 level of Sm³⁺ ions. The suitable combination of Bi₂O₃ (10 mol%) and Sm³⁺ (0.5 mol%) ions in these glasses acted as an efficient lasing material and might be suitable for the development of visible orange‐red photonic materials.     

Intense green light emission and thermoluminescence glow curve analysis of Tb3+-activated CaY2O4 phosphor

Here, the synthesis and luminescence analysis of the Tb³⁺-activated phosphor were reported. The CaY₂O₄ phosphors were synthesized using a modified solid-state reaction method with a variable doping concentration of Tb³⁺ ion (0.1–2.5 mol%). As synthesized, the phosphor was characterized using Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction analysis techniques for the optimized concentration of doping ions. The prepared phosphor showed a cubic structure, and FTIR analysis confirmed functional group analysis. It was discovered that the intensity of 1.5 mol% was higher than at other concentrations after the photoluminescence (PL) excitation and emission spectra were recorded for different concentrations of doping ions. The excitation was monitored at 542 nm, and the emission was monitored at 237 nm. At 237 nm excitation, the emission peaks were found at 620 nm (⁵D₄→⁷F₃), 582 nm (⁵D₄→⁷F₄), 542 nm (⁵D₄→⁷F₅), and 484 nm (⁵D₄→⁷F₆). The 1931 CIE (x, y) chromaticity coordinates showed the distribution of the spectral region calculated from the PL emission spectra. The values of (x = 0.34 and y = 0.60) were very close to dark green emission. Therefore, the produced phosphor would be very useful for light-emitting diode (green component) applications. Thermoluminescence glow curve analysis for various concentrations of doping ions and various ultraviolet (UV) exposure times was carried out, and a single broad peak was found at 252°C. The computerized glow curve deconvolution method was used to obtain the related kinetic parameters. The prepared phosphor exhibited an excellent response to UV dose and could be useful for UV ray dosimetry.     

Emission analysis of RE3+ (RE = Sm,Dy):B2O3‐TeO2‐Li2O‐AlF3 glasses

This article reports on the optical properties of 0.5% mol of Sm³⁺, Dy³⁺ ion‐doped B₂O₃‐TeO₂‐Li₂O‐AlF₃ (LiAlFBT) glasses. The glass samples were characterized by optical absorption and emission spectra. Judd‐Ofelt theory was applied to analyze the optical absorption spectra and calculate the intensity parameters and radiative properties of the emission transitions. The emission spectra of Sm³⁺ and Dy³⁺:LiAlFBT glasses showed a bright reddish‐orange emission at 598 nm (⁴G_5/2 → ⁶H_7/2) and an intense yellow emission at 574 nm (⁴F_9/2 → ⁶H_13/2), respectively. Full width at half maximum (FWHM), stimulated emission cross section, gain bandwidth and optical gain values were also calculated to extend the applications of the Sm³⁺ and Dy³⁺:LiAlFBT glasses. Copyright © 2012 John Wiley & Sons, Ltd.     

Investigation of the spectral characteristics of Sm3+ ions in lead borosilicate glass for photonic applications

Different concentrations of Sm₂O₃-doped lead borosilicate glass were synthesized using a melt–quenching method and their characteristics were analyzed using X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy absorption, emission, and decay curves. From the XRD patterns, the noncrystalline nature of titled glass was confirmed. The structural groups that existed in the host glass were observed from FTIR spectra. The Judd–Ofelt (JO) intensity parameters and oscillator strengths were derived from the absorption spectra and compared with various reported systems. The excitation luminescence levels of the Sm³⁺ ion radiative properties were further computed using the JO intensity parameters. Effective bandwidth, emission cross-sections (σ_e), and several lasing properties were assessed from emission spectra and compared with other reported glass systems. The decay curves of the ⁴G_5/2 level of Sm³⁺ ion were also been measured and examined. Additionally, the colour coordinates of the Commission International de I'Éclairage chromaticity were assessed. The titled glass were suitable for visible reddish orange luminescence devices based on all obtained parameters.     

Preparation,characterization and luminescence properties of BiPO4:Eu nanophosphors

A facile chemical method was employed to prepare fine BiPO₄:Eu³⁺ phosphor particles calcined at the same temperature. Introducing lithium greatly affected the morphology of the samples and further affected the luminescence intensity. The samples were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL) spectroscopy. The XRD patterns of BiPO₄:Eu³⁺ indicated a monoclinic phase. From the fluorescence spectra, the emission transition ⁵D₀ → ⁷F₁ is more prominent than the normal red emission transition ⁵D₀ → ⁷F₂. Based on the intensity ratios of ⁵D₀ → ⁷F₂ to ⁵D₀ → ⁷F₁ in the emission spectra, it can be concluded that introducing Li⁺ can improve the symmetry of the crystal lattice and modify the emission intensity. Sharp lines at 395 nm are the strongest of the f–f transitions and match well with near‐UV LED chips. Copyright © 2012 John Wiley & Sons, Ltd.