Autoradiography of Water-Soluble Materials in Plant Tissues

Samples of tissue with water-soluble substances are lyophilized and doubly-infiltrated with parlodion and paraffin. Sections are mounted on an adhesive-coated cover slip with chloroform. The reverse side of the cover slip is coated successively with a thin layer of Harleco resin and a thick layer of Kodak “Opaque”. A corner of the cover slip is broken off as a marker. The cover slip is assembled with a covering glass slide on a nuclear track plate (Kodak NTB-2) with protective coating, the section being in contact with the emulsion, and held in place during radioactive exposure. Before development, the cover slip and plate are exposed briefly to light and then disassembled. Following development of the plate and removal of the layer of resin and opaque from the cover slip, staining of the section is optional. Lining up of the section with its autoradiograph can be accurate within 1-5μ.     

Autoradiography of Water-Soluble Materials in Plant Tissues

Samples of tissue with water-soluble substances are lyophilized and doubly-infiltrated with parlodion and paraffin. Sections are mounted on an adhesive-coated cover slip with chloroform. The reverse side of the cover slip is coated successively with a thin layer of Harleco resin and a thick layer of Kodak “Opaque”. A corner of the cover slip is broken off as a marker. The cover slip is assembled with a covering glass slide on a nuclear track plate (Kodak NTB-2) with protective coating, the section being in contact with the emulsion, and held in place during radioactive exposure. Before development, the cover slip and plate are exposed briefly to light and then disassembled. Following development of the plate and removal of the layer of resin and opaque from the cover slip, staining of the section is optional. Lining up of the section with its autoradiograph can be accurate within 1-5μ.     

The circumfusion system for multipurpose culture chambers. I. Introduction to the mechanics, techniques, and basic results of a 12-chamber (in vitro) closed circulatory system

A self-contained mechanical system for circulating nutrient fluid through 12 tissue culture chambers is described in detail. This system utilizes nonperforated cellophane membranes in the chambers which separate the circulating nutrient from the tissue culture environments. The nutrient, therefore, is dialyzed through the cellophane of each chamber; some cell products are retained in the microenvironment between the closely apposed cellophane and cover slip, whereas the other cell products move from chamber to chamber in the circulating nutrient. The resultant environmental conditions directed by the circumfusion systems are highly favorable for maintaining the differentiation of chick embryo tissues over protracted periods; a number of micrographs are shown.     

Disposable real-time microPCR device: lab-on-a-chip at a low cost

We have designed, fabricated and tested a real-time micro polymerase chain reaction (microPCR) system. It consists of a microscope glass cover slip placed on top of a micromachined silicon chip integrated with a heater and a temperature sensor. A single microL of a sample containing DNA was placed on the glass and encapsulated with mineral oil to prevent the evaporation of water, thus forming a virtual reaction chamber (VRC). The PCR chip required half a second to heat up from 72 to 94 degrees C and two seconds to cool from 94 to 55 degrees C, corresponding to a cooling rate of -20 K s(-1). The real-time PCR yield was determined by a fluorescence method. The melting curve analysis method as well as capillary electrophoresis was performed to determine the purity of the PCR product. As the glass slip is disposable, cross-contamination from sample to sample is eliminated. The total cost of running the PCR is given by the value of the cover slip and its treatment.     

Overestimation of respiration rates in commercially available clamp-on leaf chambers. Complications with measurement of net photosynthesis

The possible interference when measuring gas exchange with respiratory CO₂ produced under the gasket of commercially available clamp‐on leaf chambers was investigated. Two of these chambers were compared with a leaf chamber that accommodated an entire leaf without clamping it under a gasket. An overestimation of dark respiration rate (R_D) by 55% was found with Plantago major leaves, a species with homobaric leaves that have high resistance for lateral gaseous transport. The percentage was similar in the heterobaric Ficus benjamina, but was 32% in the highly porous homobaric Nicotiana tabacum. Net photosynthetic rate at low photon flux density was underestimated by 35% in the clamp‐on chamber. However, the gasket effect was not detectable at light saturation because the error was small in comparison with the high photosynthetic rates. Estimation of respiration in the light (R_L) in Nicotiana as derived from CO₂ exchange at low CO₂ concentrations was complicated by three factors. The inward diffusion of respiratory CO₂ from under the gasket was added to a diffusion of CO₂ from outside through the gasket material and through the leaf, which produced an even larger error in R_L in comparison with R_D at ambient CO₂. These errors are significant for estimations of carbon gain at whole plant and canopy level and also at the leaf level when photosynthetic rates are low. Possible improvements in gasket design and corrections of CO₂ exchange measurements for the gasket effect are discussed.     

A flow system for the study of shear forces upon cultured endothelial cells

A parallel plate chamber in a flow system has been designed to study the effects of fluid shear stresses on cells. The system was applied to the study of cultured endothelial cells grown on cover slips which were accommodated in recessed wells in the base plate. Dye injection studies in the chamber indicated laminar flow over the cells. Shear rates measured over the cover slips by an electrochemical technique were found to be linear with flow rate. Laser doppler anemometry showed parabolic profiles between the plates. Endothelial cells subjected to flow showed a correlation between the time required for orientation and the magnitude of the shear stress.     

Parabiotic Chamber for Organ Cultures: Improved Model

A modified parabiotic chamber for organ cultures is described. It consists of a modified organ culture dish, glass cover slip, a cylinder of semipermeable membrane, and a stainless-steel mesh filter support. Silicone and agar seals were used. Diffusion occurred rapidly and with consistent rates at 37 C when a ratio of 5:2 reservoir to inner chamber volume was used. The device is simple to construct and assemble and allows for continuous observation while maintaining a large surface area available for diffusion. The volumes of the reservoir, inner chamber, and agar base can be varied, and the chamber may be used with a wide variety of cell and organ culture systems.     

Collodion Membranes in Pollen Tube Technique

Membranes are formed by allowing a drop of collodion-acetone solution to come into contact with the surface of warm sugar solution in a petri dish. Pollen is germinated upon the smooth areas of the membrane when all traces of acetone have evaporated. Semipermanent preparations are made by isolating the pollinated area of the membrane, floating it onto a slide, and, after the removal of excess sugar solution, adding a drop of acetic-stain fixative, followed by an albumenized cover slip. The preparation can be made permanent by inverting a slide in a mixture of 1 part glacial acetic acid and 3 parts absolute alcohol, when the collodion membrane will dissolve and allow the cover slip and adhering grains to fall free. The cover slip is then passed through absolute alcohol (2 changes), xylene, and mounted in neutral mountant on a clean slide. By substituting a drop of the alcohol-acetic acid mixture in place of acetic-stain fixative, the grains adhering to the cover slip may be stained by the Feulgen method.     

Simple Aids to Microscope Illumination

The following rapid but reliable method of making permanent preparations from temporary mounts has proved to be very useful.

Pollen mother-cell smears: Smeared anthers are treated hi the usual way with Belting's acetocarmine, except that the cover slip is left off. When correct differentiation is attained the stain is thoroly washed off with 50% acetic acid and the slide flooded with dioxan. This is followed by 2 changes of dioxan for 2 minutes each. A drop of Canada balsam dissolved in dioxan is added and a cover slip applied. In cases where a cover slip has been used at the acetocarmine stage it can be floated off in a staining jar of 50% acetic acid and dehydration with dioxan carried out as above.

Insect salivary gland chromosome smears: The glands are crushed under a cover slip in acetocarmine on a slide coated with dried egg albumen. After 20 minutes the area around the cover slip is flooded with 50% acetic acid and the cover slip floats loose so that it can be removed. The above described dioxan dehydrating procedure is then employed.

Squash preparations: Root tips are fixed in some suitable fixative and the Feulgen technic applied. The stained root tips can either be dehydrated by passing thru 3 changes of dioxan and mounting in dioxan-balsam where they are divided into small longitudinal sections by sharp needles, or they can be put immediately into a mixture of 1 part of 50% acetic acid to 1 part of corn syrup where shredding with needles is carried out. A cover slip is put on and separation of the cells completed by tamping or by applying pressure to the cover. This squash method is useful with anthers which are difficult to smear when in the early prophase stages of meiosis.     

A simple method of preparing permanent squash preparations using cellophane]

A technique to prepare permanent squashed preparations of cell nuclei and chromosomes is proposed. Fix a piece of material on the slide with acetic alcohol (1:3), macerate with a 45% acetic acid, cover with hydrophilic cellophane previously soaked in a 45% acetic acid and then with a cover slip and filter paper to squash finally as it is routinely performed. After that soak off the cover slip with alcohol, post-fix the squashed preparation together with cellophane in alcohol for 5-10 min, unstick the cellophane, pass the preparation through alcohol once again and dry it. The subsequent treatment of the squashed preparation depends on the purpose of investigation. The slide may be tinctured overlaid with photoemulsion for autoradiography, or processed by different ways.     

Elimination of Material that Obscures Stained Chromosomes in Squashes of Vicia faba Root Tips

A procedure for elimination of cytoplasmic debris from Vicia faba root tip cells is: (1) a root tip previously fixed in 3:1 absolute alcohol-acetic acid and stained by the Feulgen method is placed on a slide and squashed in a small drop of water, (2) a cover slip is applied and the cells are flattened with a hand-operated lever device supplying 35 pounds pressure onto a 22 × 22 mm cover glass, (3) the slide is quick-frozen, the cover slip is removed, and the slide is dropped immediately into water, (4) the slide is cleared through an alcohol-xylene dehydration series and permanently mounted. The significant result of this procedure is the consistent presence of clear, flat cells showing excellent definition of chromosomes.     

Permanent Preparations from Rapid Cytological Technics

The following rapid but reliable method of making permanent preparations from temporary mounts has proved to be very useful.

Pollen mother-cell smears: Smeared anthers are treated hi the usual way with Belting's acetocarmine, except that the cover slip is left off. When correct differentiation is attained the stain is thoroly washed off with 50% acetic acid and the slide flooded with dioxan. This is followed by 2 changes of dioxan for 2 minutes each. A drop of Canada balsam dissolved in dioxan is added and a cover slip applied. In cases where a cover slip has been used at the acetocarmine stage it can be floated off in a staining jar of 50% acetic acid and dehydration with dioxan carried out as above.

Insect salivary gland chromosome smears: The glands are crushed under a cover slip in acetocarmine on a slide coated with dried egg albumen. After 20 minutes the area around the cover slip is flooded with 50% acetic acid and the cover slip floats loose so that it can be removed. The above described dioxan dehydrating procedure is then employed.

Squash preparations: Root tips are fixed in some suitable fixative and the Feulgen technic applied. The stained root tips can either be dehydrated by passing thru 3 changes of dioxan and mounting in dioxan-balsam where they are divided into small longitudinal sections by sharp needles, or they can be put immediately into a mixture of 1 part of 50% acetic acid to 1 part of corn syrup where shredding with needles is carried out. A cover slip is put on and separation of the cells completed by tamping or by applying pressure to the cover. This squash method is useful with anthers which are difficult to smear when in the early prophase stages of meiosis.     

Morphology of spiracles in adult Hyalomma truncatum ticks (Acari; Ixodidae)

Scanning electron microscopical investigations of fractures and corrosion casts of spirales in adult ticks of Hyalomma truncatum revealed a three-part structure consisting of the spiracular plate forming the outer part followed by the subostial space, which leads into the atrial chamber from which the main tracheal trunks arise. The spiracular plate sonsists of a thin surface plate perforated by aeropyles, an underlying interpedicellar space formed by pedicels and an inner thick base plate. The surface plate is subdivided into a porous and a non-porous area. The macula is surrounded by the porous area and cleft by the ostium, which is bounded by a lip. The lip rests on a stalk which passes through the subostial space and forms the lateral wall of the atrial chamber. The interpedicellar space is chambered comprising four types of chambers. Large pyriform chambers (type 1) open to the atmosphere via a large aeropyle and are connected at their base with a duct traversing the base plate. They correspond numerically and in their position with the large aeropyles and the ducts of the base plate. Each chamber is surrounded by four to six medium-sized tubular chambers (type 2) which are closed at both ends. Small tubular chambers (type 3) open to the atmosphere via a small aeropyle, are closed at their base and correspond in number and position to the small aeropyles. Elongated chambers (type 4) are arranged in two to three rows around the subostial space and are closed at both ends. The front row communicates with the subostial space via large gaps. All chambers interconnect with each other by slit-like fenestrations. Below the macula and surrounding the stalk is the subostial space. Over the medial half, the subostial space opens into the atrial chamber. The lateral wall of the atrial chamber is thick, whereas the opposite wall is thin, folded and can be everted and inverted. Inverted, the medial wall closes up the opening to the subostial space and the main tracheal trunks. The base of the atrial chamber sonsists of the openings of the main tracheal trunks only. It is concluded that the aeropyles constitute the functional openings of a spiracle, the interpedicellar space and the subostial space act as diffusion barrier and the atrial chamber is exclusively responsible for the motory process of in- and expiration and is the only closing device of the spiracle.     

Radiative Peristaltic Flow of Jeffrey Nanofluid with Slip Conditions and Joule Heating

Mixed convection peristaltic flow of Jeffrey nanofluid in a channel with compliant walls is addressed here. The present investigation includes the viscous dissipation, thermal radiation and Joule heating. Whole analysis is performed for velocity, thermal and concentration slip conditions. Related problems through long wavelength and low Reynolds number are examined for stream function, temperature and concentration. Impacts of thermal radiation, Hartman number, Brownian motion parameter, thermophoresis, Joule heating and slip parameters are explored in detail. Clearly temperature is a decreasing function of Hartman number and radiation parameter.     

Entropy production mapping on stretched DNA interacted with proteins

This paper presents an entropy production mapping (EPM) method for detecting a higher-order structure change of a stretched and immobilized DNA molecule on a cover slip through measuring and mapping an increment of the orientational entropy (defined as "entropy production") of the Watson-Crick base pairs by the interaction of biological factors such as proteins; the stretched DNA molecule undergoes a higher-order structure change by the interaction, so that the orientational entropy at the interaction regions increases because the alignment of the base pairs is reduced at the regions. We demonstrated the utility of this "EPM method" by using a histone-lambda DNA system. It is revealed that the histone interaction region is clearly distinguished from no interaction regions on a stretched lambda DNA molecule immobilized on a cover slip.     

Serial Sections of Smears for Electron Microscopy

Ultrathin sections for electron microscopy may be prepared from smears or squashes embedded in methacrylate. The cover slip or glass slide with the attached fixed cellular material is passed through alcohols to methacrylate monomer and finally to monomer containing a catalyst. The portion of the smear to be sectioned is covered with a gelatin capsule containing partially polymerized methacrylate. When polymerization is completed at 47°C, the hardened block is separated from the cover slip and trimmed under the compound microscope so as to encompass the desired area. Photographs are made of the intact smear to afford a basis for identification of cellular materials in electron micrographs of the individual ultrathin sections.     

Internal reproductive organs of the female humpbacked fly,Megaselia scalaris Loew (Diptera : Phoridae)

The female reproductive system of the humpbacked fly Megaselia scalaris Loew (Diptera : Phoridae) was examined in whole mount preparations and serial sections. The system includes 2 ovaries, paired lateral oviducts, a common oviduct, and a genital chamber, opening externally through a gonopore, anteriad and ventrad to the anus. The ducts of the 2 accessory glands open independently into the dorsal region of the genital chamber. The terminal duct of a 2-armed spermatheca joins the right posterior and ventral wall of the genital chamber, immediately inside the gonopore. Passing dorally, the spermathecal duct lies immediately ventral to the duct of the right accessory gland. A short distance posteriad, it divides into two branches, each supplying an arm of the spermatheca. The genital chamber extends both anteriorly and posteriorly from its junction with the common oviduct, creating anterior and posterior compartments. In the right lateral wall of the genital chamber, a distinctive loop-shaped thickening (plate) resembles a darkened thread when it is observed through the integument. Features likely to have taxonomic utility include the posterior and ventral location of the terminal portion of the spermathecal duct; and the asymmetrically arranged, loop-shaped plate.     

Tumor ablation with irreversible electroporation

We report the first successful use of irreversible electroporation for the minimally invasive treatment of aggressive cutaneous tumors implanted in mice. Irreversible electroporation is a newly developed non-thermal tissue ablation technique in which certain short duration electrical fields are used to permanently permeabilize the cell membrane, presumably through the formation of nanoscale defects in the cell membrane. Mathematical models of the electrical and thermal fields that develop during the application of the pulses were used to design an efficient treatment protocol with minimal heating of the tissue. Tumor regression was confirmed by histological studies which also revealed that it occurred as a direct result of irreversible cell membrane permeabilization. Parametric studies show that the successful outcome of the procedure is related to the applied electric field strength, the total pulse duration as well as the temporal mode of delivery of the pulses. Our best results were obtained using plate electrodes to deliver across the tumor 80 pulses of 100 micros at 0.3 Hz with an electrical field magnitude of 2500 V/cm. These conditions induced complete regression in 12 out of 13 treated tumors, (92%), in the absence of tissue heating. Irreversible electroporation is thus a new effective modality for non-thermal tumor ablation.     

Sudan Black B And Acetocarmine as a Combination Stain

Epidermis stripped from either fresh or fixed plant organs, or sections of paraffin-embedded or fresh material are placed on a slide and covered with a drop or two of iron-acetocarmine. The stain is intensified by warming the slide over a flame. After a few minutes a drop or two of a saturated solution of Sudan black B in 45% acetic acid is added and a cover slip applied. The preparations cannot be made permanent, but last a few weeks if sealed with a compound such as gum mastic-paraffin, or if the combined stain is drained off and a drop of Karo syrup is added before the cover slip is applied. The acetocarmine produces its usual staining effects, i.e., nuclei dark red and some components of the cytoplasm of certain cells a less intense red. The Sudan black B colors lipid structures an intense blue.     

A Plexiglas Isolation-Transfer Chamber for Use with the Fonbrune Micromanipulator

The chamber is made with two pieces of clear Plexiglas, both 1 inch wide and 3 inches long; the top piece, 1/16 inch thick; the bottom, 1/4 inch. A recess 14 mm wide, 37 mm long and 5 mm deep is cut into the bottom piece leaving a margin 1.5 mm wide, this margin is then cut down to a height of 2.5 mm for the length of the recess; a piece of moistened filter paper I1/2 inches long and 5 mm deep is attached to the rear wall, leaving the bottom clear for the transmitted light; two notches 13 × 15 mm and 12 mm apart are cut from the top piece. The top is superimposed on the bottom and held by two screws to form a chamber that is accessible to microdissection instruments through its open side. Two cover glasses, one bearing the specimen and the other, the medium to which the transfer is to be made, are placed over the notches in the top (agar side down). The actual transfer of material is made by shifting the position of the cover glasses with the mechanical stage of the microscope while the specimen is held by the micromanipulator.