Molecular dynamics simulations to investigate the stability and aggregation behaviour of the amyloid-forming peptide VQIVYK from tau protein

The formation of paired helical filaments arising from the short hexapeptide in the third repeat of tau protein, ³⁰⁶VQIVYK³¹¹, is critical for tau polymerisation. The atomic structure of the VQIVYK oligomer has revealed a dry, tightly self-complementing structure between the neighbouring β-sheet layers, termed as ‘steric zipper’. In this study, several molecular dynamics simulations with all-atom explicit water were conducted to investigate the structural stability and aggregation behaviour of the VQIVYK peptide with various sizes and its single alanine replacement mutations. Our results indicate that the van der Waals interaction between side chains of Q2, the π–π stacking interaction between aromatic rings of Y5, and the electrostatic interaction between K6 and the C-terminus play an important role in stabilising the VQIVYK oligomers within the same β-sheet layer, while hydrophobic steric zipper involving V1, I3 and Y5 is responsible for holding the neighbouring β-sheet layers together. The twisted angles of the VQIVYK oligomers were also analysed and shown to be size dependent. The present results not only provide atomic insights into amyloid formation, but are also helpful for designing new or modified capping peptides and inhibitors to prevent fibril formation of the VQIVYK peptide from tau protein.     

Sorting signal of Escherichia coli OmpA is modified by oligo-(R)-3-hydroxybutyrate

Escherichia coli outer membrane protein A (OmpA) is a well-established model for the study of membrane assembly. Previous studies have shown that the essential sequence for outer membrane localization, known as the sorting signal, is contained in a segment of the eighth β-strand, residues 163-171. Sequential digestion of OmpA, purified from outer membranes or inclusion bodies with cyanogen bromide and Staphylococcus aureus GluC, yielded peptides 162-174(LSLGVSYRFGQGE). Western blot and chemical assays indicated that the peptide was covalently modified by oligo-(R)-3-hydroxybutyrate (cOHB), a flexible, amphipathic oligoester. MALDI/MS was consistent with modification of peptides 162-174 by up to ten R-3-hydroxybutyrate (HB) residues. Western blot analysis of mutants of the peptide, using anti-OHB IgG, indicated that cOHB modification was not inhibited by the single mutations S163G, S167G, Y168F, R169N or R169D; however, cOHB was not detected on peptides containing the double mutations S163G:S167G S163G:V166G, L162G:S167G, and L164G:S167G. MALDI/MS/MS of double mutant S163G:S167G confirmed the absence of cOHB-modification. The results suggest that cOHB may be attached to one or both serines, and point to the importance of the flanking hydrophobic residues. Modification by cOHB may play a role in outer membrane targeting and assembly of OmpA.     

Understanding the structural and energetic basis of PD-1 and monoclonal antibodies bound to PD-L1: A molecular modeling perspective

Background

The inhibitors blocking the interaction between programmed cell death protein 1(PD-1) and programmed death-ligand 1(PD-L1) can activate the immune response of T cell and eliminate cancer cells. The crystallographic studies have provided structural insights of the interactive interfaces between PD-L1 and its protein ligands. However, the hotspot residues on PD-L1 as well as structural and energetic basis for different protein ligands still need to be further investigated.

iSPOT: a web tool for the analysis and recognition of protein domain specificity

Methods that aim at predicting interaction partners are very likely to play an important role in the interpretation of genomic information. iSPOT (iSpecificity Prediction Of Target) is a web tool (accessible at http://cbm.bio.uniroma2.it/iSPOT) developed for the prediction of protein-protein interaction mediated by families of peptide recognition modules. iSPOT accesses a database of position specific residue-residue interaction frequencies for members of the SH3 and PDZ protein domain families. The software utilises this database to provide a score for any potential domain peptide interaction.ISPOT: 1. evaluates the likelihood of the interaction between any of the peptides contained in an input protein and a list of domains of the two different families; 2. searches in the SWISS-PROT database for potential partners of a query domain; and 3. has access to a repository of all the domain/target peptide interaction data.     

A rapid method to attain isotope labeled small soluble peptides for NMR studies

A widely applicable strategy is presented for efficient and rapid production of small water soluble peptides expressed as fusion proteins with the immunoglobulin-binding domain of streptococcal protein G. A simple extraction and purification scheme that includes a protease cleavage step to release the target peptide is described. The yield of authentic target peptide exceeds 10 mg per liter of culture. Production of U-¹³C, ¹⁵N and highly deuterated U-¹³C, ¹⁵N isotope labeled peptide is demonstrated for the 11 residue S2 peptide, corresponding to the C-terminus of the -subunit of transducin, and the coiled coil trimerization domain from cartilage matrix protein (CMPcc), respectively. Heteronuclear two-dimensional NMR spectra are used for initial peptide characterization.     

Structures and dynamics of β-barrel oligomer intermediates of amyloid-beta16-22 aggregation

Accumulating evidence suggests that soluble oligomers are more toxic than final fibrils of amyloid aggregations. Among the mixture of inter-converting intermediates with continuous distribution of sizes and secondary structures, oligomers in the β-barrel conformation – a common class of protein folds with a closed β-sheet – have been postulated as the toxic species with well-defined three-dimensional structures to perform pathological functions. A common mechanism for amyloid toxicity, therefore, implies that all amyloid peptides should be able to form β-barrel oligomers as the aggregation intermediates. Here, we applied all-atom discrete molecular dynamics (DMD) simulations to evaluate the formation of β-barrel oligomers and characterize their structures and dynamics in the aggregation of a seven-residue amyloid peptide, corresponding to the amyloid core of amyloid-β with a sequence of ¹⁶KLVFFAE²² (Aβ16-22). We carried out aggregation simulations with various numbers of peptides to study the size dependence of aggregation dynamics and assembly structures. Consistent with previous computational studies, we observed the formation of β-barrel oligomers in all-atom DMD simulations. Using a network-based approach to automatically identify β-barrel conformations, we systematically characterized β-barrels of various sizes. Our simulations revealed the conformational inter-conversion between β-barrels and double-layer β-sheets due to increased structural strains upon forming a closed β-barrel while maximizing backbone hydrogen bonds. The potential of mean force analysis further characterized the free energy barriers between these two states. The obtained structural and dynamic insights of β-barrel oligomers may help better understand the molecular mechanism of oligomer toxicities and design novel therapeutics targeting the toxic β-barrel oligomers. This article is part of a Special Issue entitled: Protein Aggregation and Misfolding at the Cell Membrane Interface edited by Ayyalusamy Ramamoorthy     

X-ray Crystal Structures of Monomeric and Dimeric Peptide Inhibitors in Complex with the Human Neonatal Fc Receptor,FcRn

The neonatal Fc receptor, FcRn, is responsible for the long half-life of IgG molecules in vivo and is a potential therapeutic target for the treatment of autoimmune diseases. A family of peptides comprising the consensus motif GHFGGXY, where X is preferably a hydrophobic amino acid, was shown previously to inhibit the human IgG:human FcRn protein-protein interaction (Mezo, A. R., McDonnell, K. A., Tan Hehir, C. A., Low, S. C., Palombella, V. J., Stattel, J. M., Kamphaus, G. D., Fraley, C., Zhang, Y., Dumont, J. A., and Bitonti, A. J. (2008) Proc. Natl. Acad. Sci. U.S.A., 105, 2337–2342). Herein, the x-ray crystal structure of a representative monomeric peptide in complex with human FcRn was solved to 2.6 Å resolution. The structure shows that the peptide binds to human FcRn at the same general binding site as does the Fc domain of IgG. The data correlate well with structure-activity relationship data relating to how the peptide family binds to human FcRn. In addition, the x-ray crystal structure of a representative dimeric peptide in complex with human FcRn shows how the bivalent ligand can bridge two FcRn molecules, which may be relevant to the mechanism by which the dimeric peptides inhibit FcRn and increase IgG catabolism in vivo. Modeling of the peptide:FcRn structure as compared with available structural data on Fc and FcRn suggest that the His-6 and Phe-7 (peptide) partially mimic the interaction of His-310 and Ile-253 (Fc) in binding to FcRn, but using a different backbone topology.     

Interplay of Sequence,Topology and Termini Charge in Determining the Stability of the Aggregates of GNNQQNY Mutants: A Molecular Dynamics Study

This study explores the stabilities of single sheet parallel systems of three sequence variants of ¹GNNQQNY⁷, N2D, N2S and N6D, with variations in aggregate size (5–8) and termini charge (charged or neutral). The aggregates were simulated at 300 and 330 K. These mutations decrease amyloid formation in the yeast prion protein Sup35. The present study finds that these mutations cause instability even in the peptide context. The protonation status of termini is found to be a key determinant of stabilities; other determinants are sequence, position of mutation and aggregate size. All systems with charged termini are unstable, whereas both stable and unstable systems are found when the termini are neutral. When termini are charged, the largest stable aggregate for the N2S and N6D systems has 3 to 4 peptides whereas N2D mutation supports oligomers of larger size (5-and 6-mers) as well. Mutation at 2^nd position (N2S and N2D) results in fewer H-bonds at the mutated as well as neighboring (Gly1/Gln4) positions. However, no such effect is found if mutation is at 6^th position (N6D). The effect of Asn→Asp mutation depends on the position and termini charge: it is more destabilizing at the 2^nd position than at the 6^th in case of neutral termini, however, the opposite is true in case of charged termini. Appearance of twist in stable systems and in smaller aggregates formed in unstable systems suggests that twist is integral to amyloid arrangement. Disorder, dissociation or rearrangement of peptides, disintegration or collapse of aggregates and formation of amorphous aggregates observed in these simulations are likely to occur during the early stages of aggregation also. The smaller aggregates formed due to such events have a variety of arrangements of peptides. This suggests polymorphic nature of oligomers and presence of a heterogeneous mixture of oligomers during early stages of aggregation.     

Electrostatic potential as a tool to understand interactions between malaria vaccine candidate peptides and MHC II molecules

One of the most important problems in vaccine development consists in understanding receptor–ligand interactions between Class II Major Histocompatibility Complex molecules (MHC II) and antigenic peptides involved in inducing an appropriate immune response. In this study, we used X-ray crystallography structural data provided by the HLA-DRβ1*0301–CLIP peptide interaction to compare native non-immunogenic and specifically-modified immunogenic peptides derived from the malarial SALSA protein, by analyzing molecular electrostatic potential surfaces on the most important regions of the peptide binding groove (Pockets 1, 4, 6 and 9). Important differences were found on the electrostatic potential induced by these peptides, particularly in MHC II conserved residues: Qα9, Sα53, Nα62, Nα69, Yβ30, Yβ60, Wβ61, Qβ70, Kβ71 and Vβ86, the same ones involved in establishing hydrogen bonds between Class II molecule-peptide and the recognition by T cell receptor, it correlating well with the change in their immunological properties.The results clearly suggest that modifications done on the electrostatic potential of these amino acids could favor the induction of different immune responses and therefore, their identification could allow modifying peptides a priori and in silico, so as to render them into immunogenic and protection-inducers and hence suitable components of a chemically-synthesized, multi-antigenic, minimal subunit based vaccine.     

Defective regulation of the ryanodine receptor induces hypertrophy in cardiomyocytes

Recent studies on cardiac hypertrophy animal model suggest that inter-domain interactions within the ryanodine receptor (RyR2) become defective concomitant with the development of hypertrophy (e.g. de-stabilization of the interaction between N-terminal and central domains of RyR2; T. Oda, M. Yano, T. Yamamoto, T. Tokuhisa, S. Okuda, M. Doi, T. Ohkusa, Y. Ikeda, S. Kobayashi, N. Ikemoto, M. Matsuzaki, Defective regulation of inter-domain interactions within the ryanodine receptor plays a key role in the pathogenesis of heart failure, Circulation 111 (2005) 3400-3410). To determine if de-stabilization of the inter-domain interaction in fact causes hypertrophy, we introduced DPc10 (a peptide corresponding to the G²⁴⁶⁰-P²⁴⁹⁵ region of RyR2, which is known to de-stabilize the N-terminal/central domain interaction) into rat neonatal cardiomyocytes by mediation of peptide carrier BioPORTER. After incubation for 24 h the peptide induced hypertrophy, as evidenced by significant increase in cell size and [³H]leucine uptake. K201 or dantrolene, the reagents known to correct the de-stabilized inter-domain interaction to a normal mode, prevented the DPc10-induced hypertrophy. These results suggest that disruption of the normal N-terminal/central inter-domain interaction within the RyR2 is a causative mechanism of cardiomyocyte hypertrophy.     

Inhibition of Transmitter Release and Attenuation of Anti-retroviral-associated and Tibial Nerve Injury-related Painful Peripheral Neuropathy by Novel Synthetic Ca2+ Channel Peptides

N-type Ca²⁺ channels (CaV2.2) are a nidus for neurotransmitter release and nociceptive transmission. However, the use of CaV2.2 blockers in pain therapeutics is limited by side effects resulting from inhibition of the physiological functions of CaV2.2 within the CNS. We identified an anti-nociceptive peptide (Brittain, J. M., Duarte, D. B., Wilson, S. M., Zhu, W., Ballard, C., Johnson, P. L., Liu, N., Xiong, W., Ripsch, M. S., Wang, Y., Fehrenbacher, J. C., Fitz, S. D., Khanna, M., Park, C. K., Schmutzler, B. S., Cheon, B. M., Due, M. R., Brustovetsky, T., Ashpole, N. M., Hudmon, A., Meroueh, S. O., Hingtgen, C. M., Brustovetsky, N., Ji, R. R., Hurley, J. H., Jin, X., Shekhar, A., Xu, X. M., Oxford, G. S., Vasko, M. R., White, F. A., and Khanna, R. (2011) Suppression of inflammatory and neuropathic pain by uncoupling CRMP2 from the presynaptic Ca²⁺ channel complex. Nat. Med. 17, 822–829) derived from the axonal collapsin response mediator protein 2 (CRMP2), a protein known to bind and enhance CaV2.2 activity. Using a peptide tiling array, we identified novel peptides within the first intracellular loop (CaV2.2(388–402), “L1”) and the distal C terminus (CaV1.2(2014–2028) “Ct-dis”) that bound CRMP2. Microscale thermophoresis demonstrated micromolar and nanomolar binding affinities between recombinant CRMP2 and synthetic L1 and Ct-dis peptides, respectively. Co-immunoprecipitation experiments showed that CRMP2 association with CaV2.2 was inhibited by L1 and Ct-dis peptides. L1 and Ct-dis, rendered cell-penetrant by fusion with the protein transduction domain of the human immunodeficiency virus TAT protein, were tested in in vitro and in vivo experiments. Depolarization-induced calcium influx in dorsal root ganglion (DRG) neurons was inhibited by both peptides. Ct-dis, but not L1, peptide inhibited depolarization-stimulated release of the neuropeptide transmitter calcitonin gene-related peptide in mouse DRG neurons. Similar results were obtained in DRGs from mice with a heterozygous mutation of Nf1 linked to neurofibromatosis type 1. Ct-dis peptide, administered intraperitoneally, exhibited antinociception in a zalcitabine (2′-3′-dideoxycytidine) model of AIDS therapy-induced and tibial nerve injury-related peripheral neuropathy. This study suggests that CaV peptides, by perturbing interactions with the neuromodulator CRMP2, contribute to suppression of neuronal hypersensitivity and nociception.     

Induction of Cross-Reactivity in an Endogenous Viral Peptide Non-Reactive to FBL-3 Tumor-Specific Helper T-Cell Clones

We previously reported a helper T-cell (Th) epitope (peptide i) which corresponded to the sequence ranging from positions 462 to 479 from the N-terminus of the Friend-murine leukemia virus (F-MuLV) envelope protein (env_462-479). Homologous sequences exist in both Moloney-murine leukemia (M-MuLV env_452-469) and endogenous AKV (AKV env_453-470) viruses, which differ from F-MuLV env_462-479 in 5 and 7 amino acids, respectively. However, peptide i-specific Th clones did not respond to either of the corresponding exogenous or endogenous peptides. One amino acid substitution in M-MuLV env_452-469 (Asn to Tyr at position 465: N465Y) and three amino acids in AKV env_453-470 (H460S, A466Y and Y468H) endowed both peptides with the reactivity to one of the Th clones, F5-5, almost to the same degree as peptide i. However, the other Th clones responded differently to each of the modified endogenous peptides substituted by one to three amino acids. The cells responsive to the cross-reactive peptides occupied only a minor portion, if any, of the bulk cultured lymph node cells from peptide i-immune mice, and in particular, no significant response to the modified endogenous peptides was observed in repeated experiments. The exchange of at least 3 residues was necessary for the endogenous peptide to acquire sufficient cross-reactivity to two of the three Th clones. However, it was noticeable that a single substitution of alanine by tyrosine at the dominant T-cell receptor (TCR) contact position of the peptide i_e generated a weak but significant cross-reactivity to one of the three Th clones in this study. Thus, peptides of endogenous retroviral origin that would be modified by mutational events might become ‘non-self’ and prime Th cells leading to auto-antibody production and resulting in autoimmune disease.     

Sorting signal of Escherichia coli OmpA is modified by oligo-(R)-3-hydroxybutyrate

Escherichia coli outer membrane protein A (OmpA) is a well-established model for the study of membrane assembly. Previous studies have shown that the essential sequence for outer membrane localization, known as the sorting signal, is contained in a segment of the eighth beta-strand, residues 163-171. Sequential digestion of OmpA, purified from outer membranes or inclusion bodies with cyanogen bromide and Staphylococcus aureus GluC, yielded peptides 162-174(LSLGVSYRFGQGE). Western blot and chemical assays indicated that the peptide was covalently modified by oligo-(R)-3-hydroxybutyrate (cOHB), a flexible, amphipathic oligoester. MALDI/MS was consistent with modification of peptides 162-174 by up to ten R-3-hydroxybutyrate (HB) residues. Western blot analysis of mutants of the peptide, using anti-OHB IgG, indicated that cOHB modification was not inhibited by the single mutations S163G, S167G, Y168F, R169N or R169D; however, cOHB was not detected on peptides containing the double mutations S163G:S167G S163G:V166G, L162G:S167G, and L164G:S167G. MALDI/MS/MS of double mutant S163G:S167G confirmed the absence of cOHB-modification. The results suggest that cOHB may be attached to one or both serines, and point to the importance of the flanking hydrophobic residues. Modification by cOHB may play a role in outer membrane targeting and assembly of OmpA.     

Fe2+ binding on amyloid β‐peptide promotes aggregation

The metal ions Zn²⁺, Cu²⁺, and Fe²⁺ play a significant role in the aggregation mechanism of Aβ peptides. However, the nature of binding between metal and peptide has remained elusive; the detailed information on this from the experimental study is very difficult. Density functional theory (dft) (M06‐2X/6‐311++G (2df,2pd) +LANL2DZ) has employed to determine the force field resulting due to metal and histidine interaction. We performed 200 ns molecular dynamics (MD) simulation on Aβ_1‐42‐Zn²⁺, Aβ_1‐42‐Cu²⁺, and Aβ_1‐42‐Fe²⁺ systems in explicit water with different combination of coordinating residues including the three Histidine residues in the N‐terminal. The present investigation, the Aβ_1‐42‐Zn²⁺ system possess three turn conformations separated by coil structure. Zn²⁺ binding caused the loss of the helical structure of N‐terminal residues which transformed into the S‐shaped conformation. Zn²⁺ has reduced the coil and increases the turn content of the peptide compared with experimental study. On the other hand, the Cu²⁺ binds with peptide, β sheet formation is observed at the N‐terminal residues of the peptide. Fe²⁺ binding is to promote the formation of Glu22‐Lys28 salt‐bridge which stabilized the turn conformation in the Phe19‐Gly25 residues, subsequently β sheets were observed at His13‐Lys18 and Gly29‐Gly37 residues. The turn conformation facilitates the β sheets are arranged in parallel by enhancing the hydrophobic contact between Gly25 and Met35, Lys16 and Met35, Leu17 and Leu34, Val18 and Leu34 residues. The Fe²⁺ binding reduced the helix structure and increases the β sheet content in the peptide, which suggested, Fe²⁺ promotes the oligomerization by enhancing the peptide‐peptide interaction. Proteins 2016; 84:1257–1274. © 2016 Wiley Periodicals, Inc.     

How does each substituent functional group of oseltamivir lose its activity against virulent H5N1 influenza mutants?

To reveal the source of oseltamivir-resistance in influenza (A/H5N1) mutants, the drug-target interactions at each functional group were investigated using MD/LIE simulations. Oseltamivir in the H274Y mutation primarily loses the electrostatic and the vdW interaction energies at the –NH₃⁺ and –OCHEt₂ moieties corresponding to the weakened hydrogen-bonds and changed distances to N1 residues. Differentially, the N294S mutation showed small changes of binding energies and intermolecular interactions. Interestingly, the presence of different conformations of E276 positioned between the –OCHEt₂ group and the mutated residue is likely to play an important role in oseltamivir-resistant identification. In the H274Y mutant, it moves towards the –OCHEt₂ group leading to a reduction in hydrophobicity and pocket size, whilst in the N294S mutant it acts as the hydrogen network center bridging with R224 and the mutated residue S294. The molecular details have answered a question of how the H274Y and N294S mutations confer the high- and medium-level of oseltamivir-resistance to H5N1.     

Strategy for trapping intermediates in the folding of ribonuclease and for using 1H-nmr to determine their structures

The major unfolded form of ribonuclease A is known to show well-populated structural intermediates transiently during folding at 0°–10°C. We describe here how the exchange reaction between D₂O and peptide NH protons can be used to trap folding intermediates. The protons protected from exchange during folding can be characterized by ¹H-nmr after folding is complete. The feasibility of using ¹H-nmr to resolve a set of protected peptide protons is demonstrated by using a specially prepared sample of ribonuclease S in D₂O in which only the peptide protons of residues 7–14 are in the ¹H-form. All eight of these protected peptide protons are H-bonded. Resonance assignments made on isolated peptides containing these residues have been used to identify the protected protons. Other sets of protected protons trapped in the ¹H-form can also be isolated by differential exchange, using either ribonuclease A or S. Earlier model compound studies have indicated that H-bonded folding intermediates should be unstable in water unless stabilized by additional interactions. Nevertheless, peptides derived from ribonuclease A that contain residues 3–13 do show partial helix formation in water at low temperatures. We discuss the possibility that specific interactions between side chains can stabilize short α-helixes by nucleating the helix, and that specific interactions may also define the helix boundaries at early stages in folding.     

Structural Perspective on Ancient Neuropeptide Y-like System reveals Hallmark Features for Peptide Recognition and Receptor Activation

The neuropeptide Y (NPY) family is a peptide-activated G protein-coupled receptor system conserved across all bilaterians, and is involved in food intake, learning, and behavior. We hypothesized that comparing the NPY system in evolutionarily ancient organisms can reveal structural determinants of peptide recognition and receptor activation conserved in evolution. To test this hypothesis, we investigated the homologous FLP/NPR system of the protostome C. elegans. For three prototypic peptide–receptor complexes representing different ligand types, we integrate extensive functional data into structural models of the receptors. Common features include acidic patches in the extracellular loops (ECLs) of the receptors that cooperatively ‘draw’ the peptide into the binding pocket, which was functionally validated in vivo. A structurally conserved glutamate in the ECL2 anchors the peptides by a conserved salt bridge to the arginine of the RFamide motif. Beyond this conserved interaction, peptide binding show variability enabled by receptor-specific interactions. The family-conserved residue Q^3.32 is a key player for peptide binding and receptor activation. Altered interaction patterns at Q^3.32 may drastically increase the efficacy to activate the receptor.     

Two distinct HLA-A * 0101-specific submotifs illustrate alternative peptide binding modes

 Previous studies have defined two different peptide binding motifs specific for HLA-A ^* 0101. These motifs are characterized by the presence of tyrosine (Y) at the C-termini of 9-mer and 10-mer peptides, and either a small polar or hydrophobic (S, T, M) residue in position 2, or a negatively charged (D or E) residue in position 3. In this study, the structural requirements for peptide binding to A ^* 0101 have been further analyzed by examining the binding capacity of large sets of peptides corresponding to naturally occurring sequences which bore one or the other of these two A ^* 0101-specific motifs. By correlating the presence of specific residue types at each position along the peptide sequence with increased (or decreased) binding affinity, the prominent influence of secondary anchor residues was revealed. In most cases, the two anchors in positions 2 and 3 appear to act synergistically. With the exception of the DE₃ submotif in 9-mer peptides, a positive role for aromatic residues in position 1 and the center of the peptide (positions 4 or 5 of 9- or 10-mer peptides, respectively), and proline at C-3, were also consistently detected. However, secondary anchor residues also appear to differ significantly between the two different submotifs, demonstrating that A ^* 0101 can utilize alternative modes in binding its peptide ligands. According to these analyses, specific refined submotifs were also established, and their merit verified by independent sets of potential A ^* 0101 binding peptides. Besides providing useful insight into the nature of the interaction of the A ^* 0101 allele with its peptide ligands, such refined motifs should also facilitate accurate prediction of potential A ^* 0101-restricted peptide epitopes. Received: 16 July 1996 / Revised: 18 September 1996     

Design of high‐affinity S100‐target hybrid proteins

S100B and S100A10 are dimeric, EF‐hand proteins. S100B undergoes a calcium‐dependant conformational change allowing it to interact with a short contiguous sequence from the actin‐capping protein CapZ (TRTK12). S100A10 does not bind calcium but is able to recruit the N‐terminus of annexin A2 important for membrane fusion events, and to form larger multiprotein complexes such as that with the cation channel proteins TRPV5/6. In this work, we have designed, expressed, purified, and characterized two S100‐target peptide hybrid proteins comprised of S100A10 and S100B linked in tandem to annexin A2 (residues 1–15) and CapZ (TRTK12), respectively. Different protease cleavage sites (tobacco etch virus, PreScission) were incorporated into the linkers of the hybrid proteins. In situ proteolytic cleavage monitored by ¹H‐¹⁵N HSQC spectra showed the linker did not perturb the structures of the S100A10‐annexin A2 or S100B‐TRTK12 complexes. Furthermore, the analysis of the chemical shift assignments (¹H, ¹⁵N, and ¹³C) showed that residues T102‐S108 of annexin A2 formed a well‐defined α‐helix in the S100A10 hybrid while the TRTK12 region was unstructured at the N‐terminus with a single turn of α‐helix from D108‐K111 in the S100B hybrid protein. The two S100 hybrid proteins provide a simple yet extremely efficient method for obtaining high yields of intact S100 target peptides. Since cleavage of the S100 hybrid protein is not necessary for structural characterization, this approach may be useful as a scaffold for larger S100 complexes.     

Molecular dynamics study of interactions between polymorphic actin filaments and gelsolin segment-1

The assembly of protein actin into double-helical filaments promotes many eukaryotic cellular processes that are regulated by actin-binding proteins (ABPs). Actin filaments can adopt multiple conformations, known as structural polymorphism, which possibly influences the interaction between filaments and ABPs. Gelsolin is a Ca²⁺-regulated ABP that severs and caps actin filaments. Gelsolin binding modulates filament structure; however, it is not known how polymorphic actin filament structures influence an interaction of gelsolin S1 with the barbed-end of filament. Herein, we investigated how polymorphic structures of actin filaments affect the interactions near interfaces between the gelsolin segment 1 (S1) domain and the filament barbed-end. Using all-atom molecular dynamics simulations, we demonstrate that different tilted states of subunits modulate gelsolin S1 interactions with the barbed-end of polymorphic filaments. Hydrogen bonding and interaction energy at the filament-gelsolin S1 interface indicate distinct conformations of filament barbed ends, resulting in different interactions of gelsolin S1. This study demonstrates that filament's structural multiplicity plays important roles in the interactions of actin with ABPs.