Single-vector three-frame expression systems for affinity-tagged proteins

An effort is presented to create expression vectors which would allow expression of an inserted gene fragment in three reading frames in a single vector from a single promoter but with three separate ribosome binding sites (RBS). Each expression frame would generate an in-frame fusion with an affinity tag to allow efficient recovery of the produced fusion proteins. In the first generation vector, three identical polyhistidyl tags (His(6)) were used as affinity tags for the three expression frames. In the second generation vector, three different tags, an albumin binding domain derived from streptococcal protein G, an IgG binding Staphylococcus aureus protein A-derived domain (Z) and a His(6) tag, were employed to allow frame-specific affinity recovery. To evaluate the systems, model genes have been inserted in three different frames in both vectors. The first vector was demonstrated to produce fusion proteins in all three frames, whereas for the second, with a much wider spacing between the RBSs and affinity tags, expression could only be demonstrated from the first two translational start sites. For both systems, the first translation start was found to be significantly favored over the others. Nevertheless, we believe that the presented results represent the first successful attempt to create single-vector three-frame expression systems, a concept that could become valuable in future combined cloning-expression vectors.     

Gateway-compatible vectors for plant functional genomics and proteomics

Gateway cloning technology facilitates high-throughput cloning of target sequences by making use of the bacteriophage lambda site-specific recombination system. Target sequences are first captured in a commercially available "entry vector" and are then recombined into various "destination vectors" for expression in different experimental organisms. Gateway technology has been embraced by a number of plant laboratories that have engineered destination vectors for promoter specificity analyses, protein localization studies, protein/protein interaction studies, constitutive or inducible protein expression studies, gene knockdown by RNA interference, or affinity purification experiments. We review the various types of Gateway destination vectors that are currently available to the plant research community and provide links and references to enable additional information to be obtained concerning these vectors. We also describe a set of "pEarleyGate" plasmid vectors for Agrobacterium-mediated plant transformation that translationally fuse FLAG, HA, cMyc, AcV5 or tandem affinity purification epitope tags onto target proteins, with or without an adjacent fluorescent protein. The oligopeptide epitope tags allow the affinity purification, immunolocalization or immunoprecipitation of recombinant proteins expressed in vivo. We demonstrate the utility of pEarleyGate destination vectors for the expression of epitope-tagged proteins that can be affinity captured or localized by immunofluorescence microscopy. Antibodies detecting the FLAG, HA, cMyc and AcV5 tags show relatively little cross-reaction with endogenous proteins in a variety of monocotyledonous and dicotyledonous plants, suggesting broad utility for the tags and vectors.     

Secondary and tertiary structure formation of the beta-barrel membrane protein OmpA is synchronized and depends on membrane thickness

The mechanism of membrane insertion and folding of a beta-barrel membrane protein has been studied using the outer membrane protein A (OmpA) as an example. OmpA forms an eight-stranded beta-barrel that functions as a structural protein and perhaps as an ion channel in the outer membrane of Escherichia coli. OmpA folds spontaneously from a urea-denatured state into lipid bilayers of small unilamellar vesicles. We have used fluorescence spectroscopy, circular dichroism spectroscopy, and gel electrophoresis to investigate basic mechanistic principles of structure formation in OmpA. Folding kinetics followed a second-order rate law and is strongly depended on the hydrophobic thickness of the lipid bilayer. When OmpA was refolded into model membranes of dilaurylphosphatidylcholine, fluorescence kinetics were characterized by a rate constant that was about fivefold higher than the rate constants of formation of secondary and tertiary structure, which were determined by circular dichroism spectroscopy and gel electrophoresis, respectively. The formation of beta-sheet secondary structure and closure of the beta-barrel of OmpA were correlated with the same rate constant and coupled to the insertion of the protein into the lipid bilayer. OmpA, and presumably other beta-barrel membrane proteins therefore do not follow a mechanism according to the two-stage model that has been proposed for the folding of alpha-helical bundle membrane proteins. These different folding mechanisms are likely a consequence of the very different intramolecular hydrogen bonding and hydrophobicity patterns in these two classes of membrane proteins.     

A Pair of Ligation-Independent Escherichia coli Expression Vectors for Rapid Addition of a Polyhistidine Affinity Tag to the N- or C-Termini of Recombinant Proteins

6×His tag is one of the most widely used affinity fusion tags that facilitates detection and purification of recombinant proteins. However, the location of this tag within a particular type of protein may influence the expression, solubility, and bioactivity of the protein, and the optimal location needs to be determined experimentally. To provide a tool for rapid generation of 6× His tags at the N- or C-terminus of any recombinant protein, we have constructed a pair of Escherichia coli expression vectors—pLIC-NHis and pLIC-CHis—based on the pET30a vector, for ligation-independent cloning (LIC). Construction of this new pair of LIC vectors was accomplished by replacement of the multiple cloning site of pET30a with two specifically designed LIC cloning sites. A target gene derived by PCR with a pair of predesigned primers can be inserted into the LIC site of pLIC-NHis for expression of recombinant proteins fused with the N-terminal sequence MHHHHHHG or into that of pLIC-CHis for expression of recombinant proteins with the C-terminal sequence THHHHHH. Successful expression of two normal mammalian prion proteins and five bacterial proteins in E. coli using this pair of LIC vectors reveals that these vectors are valuable tools for the production of recombinant His-tagged proteins in E. coli.     

Surface display compared to periplasmic expression of a malarial antigen in Salmonella typhimurium and its implications for immunogenicity

Abstract Two different expression systems were investigated for the production of an 80 amino acid polypeptide, M3, from the C-terminus of the Plasmodium falciparum blood stage antigen Pf155/RESA in an attenuated Salmonella typhimurium vaccine strain. Upon expression, the malarial polypeptide was targeted either to the periplasm as a soluble fusion protein containing two IgG-binding domains (ZZ) from the staphylococcal protein A or, to the bacterial surface as an insert within a chimeric outer membrane protein A (OmpA) derived from Escherichia coli and Shigella dysenteriae . Both the ZZM3 and the OmpAM3 proteins were stably expressed in the periplasm or on the surface of Salmonella , respectively. The ZZ expression system yielded 10–100 times more malarial immunogen than did the OmpA system. Live recombinant Salmonella expressing ZZM3 or OmpAM3 were used to immunize mice intraperitoneally. Both the ZZM3 and OmpAM3 genes persisted for up to three weeks in bacteria isolated from different lymphoid organs. Bacteria expressing ZZM3 induced antibodies to M3, ZZ and to the Pf155/RESA antigen whereas, bacteria producing OmpAM3 induced similar levels of antibodies reactive with M3 but not with Pf155/RESA. Both recombinants induced a memory response of antibodies reactive with both M3 and Pf155/RESA. The high levels of M3 produced by the ZZ expression system make it suitable for the expression of heterologous antigens in Salmonella . Nevertheless, in spite of the quantitative difference in M3 expression, the ZZ and OmpA constructs elicited comparable immune responses to M3.     

A novel expression system for recombinant marine mussel adhesive protein Mefp1 using a truncated OmpA signal peptide

To express an increased level of recombinant Mefp1 (marine mussel adhesive protein) in soluble form, we constructed expression vectors encoding truncated OmpA signal peptide-Mefp1 fusion proteins. OmpA signal peptide (OmpASP) is the 21 residue peptide fragment of the 23 residue OmpA signal sequence cleavable by signal peptidase I. We successfully produced increased levels of soluble recombinant Mefp1 (rMefp1) with various deletions of OmpASP, and found that the increased expression was caused by the increased pI of the N-terminus of the fusion proteins (> or = 10.55). All the OmpA signal peptide segments of 3-21 amino acids in length had the same pI value (10.55). Our results suggest that the pI value of the truncated OmpASP (OmpASP(tr)) play an important role in directional signaling for the fusion protein, but we found no evidence for the presence of a secretion enhancer in OmpASP. For practical applications, we increased the expression of soluble rMefp1 with OmpASP(tr) peptides as directional signals, and obtained rMefp1 with the native amino terminus (nN-rMefp1) using an OmpASP(tr)| Xa leader sequence that contains the recognition site for Xa protease.     

Expression and secretion of proteins in E. coli

This review outlines approaches to the cloning and expression of proteins in Escherichia coli. The expression vectors described here (pIN-III derivatives) utilize the strong lipoprotein promoter, which is controlled by the lac-UV5 promoter-operator. These vectors provide the means for targeting a protein to any of the four subcellular compartments of the bacterial cell: cytoplasm, cytoplasmic membrane, periplasm, and outer membrane. Of particular importance is that secretion of proteins into the E. coli periplasm (using the OmpA signal peptide) is applicable for the production of both prokaryotic and eukaryotic proteins thereby enhancing protein activity and stability.     

串联亲和纯化原核表达载体的构建

【目的】构建串联亲和纯化原核表达载体,用于研究细菌中(生理状态或接近生理条件下的)蛋白-蛋白相互作用。【方法】设计并合成两条串联亲和标签序列,分别可以在靶蛋白N端和C端融合Protein G和链亲和素结合肽(Streptavidin binding peptide,SBP)标签;以pUC18载体为骨架,去除原有的阻遏蛋白基因,构建组成型表达载体pNTAP和pCTAP。【结果】成功构建N端和C端标签表达载体pNTAP和pCTAP,它们在大肠杆菌(Escherichia coli)BL21(DE3)、肠出血性大肠杆菌O157:H7和痢疾杆菌福氏5型M90T菌株中都可以实现表达。【结论】本实验构建的两个串联亲和纯化表达载体可以在部分革兰氏阴性细菌中表达,为研究细菌内蛋白-蛋白相互作用及致病菌毒力蛋白的作用机制奠定了基础。     

A modular set of prokaryotic and eukaryotic expression vectors

A modular series of versatile expression vectors is described for improved affinity purification of recombinant fusion proteins. Special features of these vectors include (i) serial affinity tags (hexahistidine-GST) to yield extremely pure protein even with very low expression rates, (ii) highly efficient proteolytic cleavage of affinity tags under a variety of conditions by hexahistidine-tagged tobacco etch virus (TEV) protease, (iii) PCR cloning design that results in a product of proteolytic cleavage with only one (a single glycine) or two (gly-ala) amino acids at the N-terminus of the protein, and (iv) expression in either Escherichia coli or Saccharomyces cerevisiae. In addition, singly hexahistidine-tagged proteins can be produced for purification under denaturing conditions and some vectors allow addition of five amino acid kinase recognition sites for easy radiolabeling of proteins. To illustrate the use of these vectors, all regulatory components of the yeast GAL regulon, rather than abundant highly soluble proteins, were produced and purified under native or denaturing conditions, and their biological activity was confirmed.     

Over‐expression of secreted proteins from mammalian cell lines

Secreted mammalian proteins require the development of robust protein over‐expression systems for crystallographic and biophysical studies of protein function. Due to complex disulfide bonds and distinct glycosylation patterns preventing folding and expression in prokaryotic expression hosts, many secreted proteins necessitate production in more complex eukaryotic expression systems. Here, we elaborate on the methods used to obtain high yields of purified secreted proteins from transiently or stably transfected mammalian cell lines. Among the issues discussed are the selection of appropriate expression vectors, choice of signal sequences for protein secretion, availability of fusion tags for enhancing protein stability and purification, choice of cell line, and the large‐scale growth of cells in a variety of formats.     

A Lactococcus lactis expression vector set with multiple affinity tags to facilitate isolation and direct labeling of heterologous secreted proteins

The gram-positive bacterium Lactococcus lactis is a useful host for extracellular protein production. A main advantage of L. lactis over other bacterial expression systems is that lactococcal cells display low levels of autolysis and proteolysis. Previously, we developed a set of vectors for nisin-inducible extracellular production of N- or C-terminally hexa-histidine (His₆)-tagged proteins. The present study was aimed at expanding our portfolio of L. lactis expression vectors for protein purification and site-specific labeling. Specifically, we present two new groups of vectors allowing N- or C-terminal provision of proteins with a Strep-tag II or AVI-tag. Vectors for AVI-tagging encode an additional His₆-tag for protein purification. Another set of vectors allows removal of N-terminal Strep- or His₆-tags from expressed proteins with the tobacco etch virus protease. Two possible applications of the developed vectors are presented. First, we show that Strep-tagged LytM of Staphylococcus aureus in the growth medium of L. lactis can be directly bound to microtiter plates coated with an affinity reagent and used for enzyme-linked immunosorbent assays. Second, we show that the AVI-tagged Sle1 protein from S. aureus produced in L. lactis can be directly biotinylated and fluorescently labeled. The fluorescently labeled Sle1 was successfully applied for S. aureus re-binding studies, allowing subcellular localization by fluorescence microscopy. In conclusion, we have developed a set of expression vectors that enhances the versatility of L. lactis as a system for production of proteins with tags that can be used for affinity purification and site-specific protein labeling.

     

Glutathione S-transferase can be used as a C-terminal, enzymatically active dimerization module for a recombinant protease inhibitor, and functionally secreted into the periplasm of Escherichia coli.

Glutathione S-transferase (GST) from Schistosoma japonicum, which is widely used for the production of fusion proteins in the cytoplasm of Escherichia coli, was employed as a functional fusion module that effects dimer formation of a recombinant protein and confers enzymatic reporter activity at the same time. For this purpose GST was linked via a flexible spacer to the C-terminus of the thiol-protease inhibitor cystatin, whose binding properties for papain were to be studied. The fusion protein was secreted into the bacterial periplasm by means of the OmpA signal peptide to ensure formation of the two disulfide bonds in cystatin. The formation of wrong crosslinks in the oxidizing milieu was prevented by replacing three of the four exposed cysteine residues in GST. Using the tetracycline promoter for tightly controlled gene expression the soluble fusion protein could be isolated from the periplasmic protein fraction. Purification to homogeneity was achieved in one step by means of an affinity column with glutathione agarose. Alternatively, the protein was isolated via streptavidin affinity chromatography after the Strep-tag had been appended to its C terminus. The GST moiety of the fusion protein was enzymatically active and the kinetic parameters were determined using glutathione and 1-chloro-2,4-dinitrobenzene as substrates. Furthermore, strong binding activity for papain was detected in an ELISA. The signal with the cystatin-GST fusion protein was much higher than with cystatin itself, demonstrating an avidity effect due to the dimer formation of GST. The quaternary structure was further confirmed by chemical crosslinking, which resulted in a specific reaction product with twice the molecular size. Thus, engineered GST is suitable as a moderately sized, secretion-competent fusion partner that can confer bivalency to a protein of interest and promote detection of binding interactions even in cases of low affinity.     

A secretory system for bacterial production of high-profile protein targets

Escherichia coli represents a robust, inexpensive expression host for the production of recombinant proteins. However, one major limitation is that certain protein classes do not express well in a biologically relevant form using standard expression approaches in the cytoplasm of E. coli. To improve the usefulness of the E. coli expression platform we have investigated combinations of promoters and selected N-terminal fusion tags for the extracellular expression of human target proteins. A comparative study was conducted on 24 target proteins fused to outer membrane protein A (OmpA), outer membrane protein F (OmpF) and osmotically inducible protein Y (OsmY). Based on the results of this initial study, we carried out an extended expression screen employing the OsmY fusion and multiple constructs of a more diverse set of human proteins. Using this high-throughput compatible system, we clearly demonstrate that secreted biomedically relevant human proteins can be efficiently retrieved and purified from the growth medium.     

Limiting the metabolic burden of recombinant protein expression during selection yields pools with higher expression levels

In order to avoid the metabolic burden of protein expression during cell growth, and to avoid potential toxicity of recombinant proteins, microbial expression systems typically utilize regulated expression vectors. In contrast, constitutive expression vectors have usually been utilized for isolation of protein expressing mammalian cell lines. In mammalian systems, inducible expression vectors are typically utilized for only those proteins that are toxic when overexpressed. We developed a tetracycline regulated expression system in CHO cells, and show that cell pools selected in the uninduced state recover faster than those selected in the induced state even though the proteins showed no apparent toxicity or expression instability. Furthermore, cell pools selected in the uninduced state had higher expression levels when protein expression was turned on only in production cultures compared to pools that were selected and maintained in the induced state through production. We show a titer improvement of greater than twofold for an Fc-fusion protein and greater than 50% improvement for a recombinant antibody. The improvement is primarily due to an increase in specific productivity. Recombinant protein mRNA levels correlate strongly with protein expression levels and are highest in those cultures selected in the uninduced state and only induced during production. These data are consistent with a model where CHO cell lines with constitutive expression select for subclones with lower expression levels.     

Membrane protein expression and production: effects of polyhistidine tag length and position

Polyhistidine tags enable the facile purification of proteins by immobilized metal affinity chromatography (IMAC). Both the type and position of purification tags can affect significantly properties of a protein such as its expression level, behavior in solution, and its ability to form suitable samples (esp. suitable crystals for X-ray crystallography). We investigated systematically the effects of polyhistidine tag length and position on many properties related to expression and purification of recombinant integral membrane proteins. Specifically, modified Escherichia coli pET expression vectors were built that placed 6- or 10-histidine tags at the N- or C-termini of the subcloned gene. The E. coli water channel AqpZ was subcloned into this suite of vectors and its expression, purification, solution properties, and yield were characterized. These studies show that: (1) all vectors yield similar expression levels, (2) tag length has a greater effect than tag position upon yield, (3) neither tag length nor position affects significantly detergent solubilization of the protein, (4) the length of the tag affects the oligomerization state of the purified protein, and (5) the tag length and position change chromatographic behavior of the detergent-solubilized protein. In addition, substitution of the lysine codon AAA at the second position, previously shown to have some effect upon soluble protein expression levels, did not have a large effect on AqpZ production. We are currently producing approximately 12 mg of purified AqpZ per liter of shake-flask culture, and preliminary crystals that diffract to approximately 5A resolution have been obtained.     

Extracellular production and affinity purification of recombinant proteins with Escherichia coli using the versatility of the maltose binding protein

Recombinant proteins are essential products of today's industrial biotechnology. In this study we address two crucial factors in recombinant protein production: (i) product accessibility and (ii) product recovery. Escherichia coli, one of the most frequently used hosts for recombinant protein expression, does not inherently secrete proteins into the extracellular environment. The major drawback of this expression system is, therefore, to be found in the intracellular protein accumulation and hampered product accessibility. We have constructed a set of expression vectors in order to facilitate extracellular protein production and purification. The maltose binding protein from E. coli is used as fusion partner for several proteins of interest allowing an export to the bacteria's periplasm via both the Sec and the Tat pathway. Upon coexpression of a modified Cloacin DF13 bacteriocin release protein, the hybrid proteins are released into the culture medium. This essentially applies to a distinguished reporter molecule, the green fluorescent protein, for which an extracellular production was not reported so far. The sequestered proteins can be purified to approximate homogeneity by a simple, rapid and cheap procedure which utilizes the affinity of the maltose binding protein to α-1,4-glucans.     

Expression, two-dimensional crystallization, and three-dimensional reconstruction of the beta8 outer membrane protein Omp21 from Comamonas acidovorans

The Omp21 protein from the proteobacterium Comamonas (Delftia) acidovorans belongs to the recently described beta8 family of outer membrane proteins, characterized by eight antiparallel beta-strands which form a beta-barrel. This family includes virulence proteins, OmpA and OmpX from Escherichia coli, and other related molecules. After we established an expression system, recombinant Omp21 was purified by Ni(2+) chelation affinity chromatography and refolded in situ while bound to resin. The native state of refolded protein was proven by FTIR spectroscopy and monitored with denaturing PAGE (heat modification). Both native and recombinant Omp21 were reconstituted in lipid membranes and crystallized two-dimensionally by controlled dialysis. Recombinant Omp21 crystallized as dimer and formed a p22(1)2(1) lattice with constants of a = 11.1 nm, b = 12.2 nm, gamma = 89.5 degrees. The 3-D structure of negatively stained, recombinant Omp21 was determined at a resolution of 1.8 nm by means of electron crystallography. Comparison with 3-D maps of OmpX and the transmembrane domain of OmpA revealed a high similarity between the mass distribution of exoplasmic loops of Omp21 and OmpA.     

Effects of signal peptide changes on the secretion of bovine somatotropin (bST) from Escherichia coli.

Bovine somatotropin (bST) was secreted from Escherichia coli at moderate levels of 1-2 micrograms/ml/OD using expression vectors in which the bST gene was fused to the lamB secretion signal. To study the secretion properties of bST in E.coli further, two approaches for modifying the secretion signal were employed. In the first case, fusion proteins were constructed with six alternative bacterial secretion signals: three from E.coli proteins (HisJ, MalE and OmpA), two from bacteriophage proteins (M13 coat protein and PA-2 Lc) and one from the chitinase A protein of Serratia marcescens. The results, as monitored by Western blot analysis of both total cell protein and the periplasmic fraction, showed that these changes in the secretion signal did not significantly affect the secretion properties of bST. In the second approach, a library of random mutations was created in the lamB secretion signal and 200 independent clones were screened. The level of secreted bST was determined by growing individual clones in duplicate in microtiter wells, inducing protein expression and measuring the bST released by osmotic shock using a particle concentration fluorescent immunoassay. The secretion properties of several novel variants in the LamB signal peptide are presented.     

Vectors and P64k gene targeting for tandem affinity purification in Neisseria meningitidis

We present and describe the construction of tagging cassettes and plasmids for tandem affinity purification (TAP) of proteins in Neisseria meningitidis. The tagging cassette is designed for carboxyl-terminal tagging of proteins and it contains only two repeats of IgG-binding units. P64k protein from N. meningitidis was chosen to fuse at these new affinity tags. This protein is well recognized in immunoassays by serum from human convalescent meningococcal disease and it is highly immunogenic in animals. To continue the characterization of this meningococcal antigen, we designed and constructed two vectors for use in TAP purification method. We also carried-out preliminary test to check the correct expression of the protein fused in these vectors.     

TSGIT: An N‐ and C‐terminal tandem tag system for purification of native and intein‐mediated ligation‐ready proteins

A large variety of fusion tags have been developed to improve protein expression, solubilization, and purification. Nevertheless, these tags have been combined in a rather limited number of composite tags and usually these composite tags have been dictated by traditional commercially‐available expression vectors. Moreover, most commercially‐available expression vectors include either N‐ or C‐terminal fusion tags but not both. Here, we introduce TSGIT, a fusion‐tag system composed of both N‐ and a C‐terminal composite fusion tags. The system includes two affinity tags, two solubilization tags and two cleavable tags distributed at both termini of the protein of interest. Therefore, the N‐ and the C‐terminal composite fusion tags in TSGIT are fully orthogonal in terms of both affinity selection and cleavage. For using TSGIT, we streamlined the cloning, expression, and purification procedures. Each component tag is selected to maximize its benefits toward the final construct. By expressing and partially purifying the protein of interest between the components of the TSGIT fusion, the full‐length protein is selected over truncated forms, which has been a long‐standing problem in protein purification. Moreover, due to the nature of the cleavable tags in TSGIT, the protein of interest is obtained in its native form without any additional undesired N‐ or C‐terminal amino acids. Finally, the resulting purified protein is ready for efficient ligation with other proteins or peptides for downstream applications. We demonstrate the use of this system by purifying a large amount of native fluorescent mRuby3 protein and bacteriophage T7 gp2.5 ssDNA‐binding protein.