Modulation of Apoptotic Pathways of Macrophages by Surface-Functionalized Multi-Walled Carbon Nanotubes

Biomedical applications of carbon nanotubes (CNTs) often involve improving their hydrophilicity and dispersion in biological media by modifying them through noncovalent or covalent functionalization. However, the potential adverse effects of surface-functionalized CNTs have not been well characterized. In this study, we functionalized multi-walled CNTs (MWCNTs) via carboxylation, to produce MWCNTs-COOH, and via poly (ethylene glycol) linking, to produce MWCNTs-PEG. We used these functionalized MWCNTs to study the effect of surface functionalization on MWCNTs-induced toxicity to macrophages, and elucidate the underlying mechanisms of action. Our results revealed that MWCNTs-PEG were less cytotoxic and were associated with less apoptotic cell death of macrophages than MWCNTs-COOH. Additionally, MWCNTs-PEG induced less generation of reactive oxygen species (ROS) involving less activation of NADPH oxidase compared with MWCNTs-COOH, as evidenced by membrane translocation of p47^phox and p67^phox in macrophages. The less cytotoxic and apoptotic effect of MWCNTs-PEG compared with MWCNTs-COOH resulted from the lower cellular uptake of MWCNTs-PEG, which resulted in less activation of oxidative stress-responsive pathways, such as p38 mitogen-activated protein kinases (MAPK) and nuclear factor (NF)-κB. These results demonstrate that surface functionalization of CNTs may alter ROS-mediated cytotoxic and apoptotic response by modulating apoptotic signaling pathways. Our study thus provides new insights into the molecular basis for the surface properties affecting CNTs toxicity.     

The Yin and Yang of carbon nanomaterials in atherosclerosis

With unique characteristics such as high surface area, capacity of various functionalization, low weight, high conductivity, thermal and chemical stability, and free radical scavenging, carbon nanomaterials (CNMs) such as carbon nanotubes (CNTs), fullerene, graphene (oxide), carbon nanohorns (CNHs), and their derivatives have increasingly been utilized in nanomedicine and biomedicine. On the one hand, owing to ever-increasing applications of CNMs in technological and industrial fields as well as presence of combustion-derived CNMs in the ambient air, the skepticism has risen over the adverse effects of CNMs on human being. The influences of CNMs on cardiovascular system and cardiovascular diseases (CVDs) such as atherosclerosis, of which consequences are ischemic heart disease and ischemic stroke, as the main causes of death, is of paramount importance. In this regard, several studies have been devoted to specify the biomedical applications and cardiovascular toxicity of CNMs. Therefore, the aim of this review is to specify the roles and applications of various CNMs in atherosclerosis, and also identify the key role playing parameters in cardiovascular toxicity of CNMs so as to be a clue for prospective deployment of CNMs.     

Fabrication,Densification, and Replica Molding of 3D Carbon Nanotube Microstructures

The introduction of new materials and processes to microfabrication has, in large part, enabled many important advances in microsystems, lab-on-a-chip devices, and their applications. In particular, capabilities for cost-effective fabrication of polymer microstructures were transformed by the advent of soft lithography and other micromolding techniques ^{1, 2}, and this led a revolution in applications of microfabrication to biomedical engineering and biology. Nevertheless, it remains challenging to fabricate microstructures with well-defined nanoscale surface textures, and to fabricate arbitrary 3D shapes at the micro-scale. Robustness of master molds and maintenance of shape integrity is especially important to achieve high fidelity replication of complex structures and preserving their nanoscale surface texture. The combination of hierarchical textures, and heterogeneous shapes, is a profound challenge to existing microfabrication methods that largely rely upon top-down etching using fixed mask templates. On the other hand, the bottom-up synthesis of nanostructures such as nanotubes and nanowires can offer new capabilities to microfabrication, in particular by taking advantage of the collective self-organization of nanostructures, and local control of their growth behavior with respect to microfabricated patterns. Our goal is to introduce vertically aligned carbon nanotubes (CNTs), which we refer to as CNT "forests", as a new microfabrication material. We present details of a suite of related methods recently developed by our group: fabrication of CNT forest microstructures by thermal CVD from lithographically patterned catalyst thin films; self-directed elastocapillary densification of CNT microstructures; and replica molding of polymer microstructures using CNT composite master molds. In particular, our work shows that self-directed capillary densification ("capillary forming"), which is performed by condensation of a solvent onto the substrate with CNT microstructures, significantly increases the packing density of CNTs. This process enables directed transformation of vertical CNT microstructures into straight, inclined, and twisted shapes, which have robust mechanical properties exceeding those of typical microfabrication polymers. This in turn enables formation of nanocomposite CNT master molds by capillary-driven infiltration of polymers. The replica structures exhibit the anisotropic nanoscale texture of the aligned CNTs, and can have walls with sub-micron thickness and aspect ratios exceeding 50:1. Integration of CNT microstructures in fabrication offers further opportunity to exploit the electrical and thermal properties of CNTs, and diverse capabilities for chemical and biochemical functionalization ³.     

N-Type Thermoelectric Performance of Functionalized Carbon Nanotube-Filled Polymer Composites

Carbon nanotubes (CNTs) were functionalized with polyethyleneimine (PEI) and made into composites with polyvinyl acetate (PVAc). CNTs were dispersed with different amounts of sodium dodecylbenzenesulfonate (SDBS) prior to the PEI functionalization. The resulting samples exhibit air-stable n-type characteristics with electrical conductivities as great as 1500 S/m and thermopowers as large as −100 µV/K. Electrical conductivity and thermopower were strongly affected by CNT dispersion, improving the properties with better dispersion with high concentrations of SDBS. This improvement is believed to be due to the increase in the number of tubes that are evenly coated with PEI in a better-dispersed sample. Increasing the amount of PEI relative to the other constituents positively affects thermopower but not conductivity. Air exposure reduces both thermopower and conductivity presumably due to oxygen doping (which makes CNTs p-type), but stable values were reached within seven days following sample fabrication.     

DNAzyme-functionalized Pt nanoparticles/carbon nanotubes for amplified sandwich electrochemical DNA analysis

A novel DNAzyme-functionalized Pt nanoparticles/carbon nanotubes (DNAzyme/Pt NPs/CNTs) bioconjugate was fabricated as trace tag for ultrasensitive sandwich DNA detection. The Pt NPs/CNTs were prepared via layer-by-layer (LBL) assembly of the Pt NPs and polyelectrolyte on the carboxylated CNTs, followed by the functionalization with the DNAzyme and reporter probe DNA through the platinum-sulfur bonding. The subsequent sandwich-type DNA specific reaction would confine numerous DNAzyme/Pt NPs/CNTs bioconjugate onto the gold electrode surface for amplifying the signal. In the presence of 3,3',5,5' tetramethylbenzidine (TMB) which could be oxidized by the DNAzyme, electrochemical signals could be generated by chronoamperometry via the interrogation of reduction electrochemical signal of oxidized TMB. The constructed DNA sensor exhibited a wide linear response to target DNA ranging from 1.0fM to 10pM with the detection limit down to 0.6fM and exhibited excellent selectivity against even a single base mismatch. In addition, this novel DNA sensor showed fairly good reproducibility, stability, and reusability.     

似哺乳类爬行动物和哺乳类动物脑颅侧壁构造类型的演替

本文对从原始似哺乳爬行动物进化到高级兽类哺乳动物过程中脑颅侧壁所发生的形态演化进行了分析,根据构造上的不同,将这些动物的脑颅侧壁的构造方式划分为四个构造类型,代表四个进化阶段。     

Comparative pulmonary toxicity assessment of pristine and functionalized multi-walled carbon nanotubes intratracheally instilled in rats: morphohistochemical evaluations

Increasing interest in safety evaluation of carbon nanotubes (CNTs) has risen in relation to their wide applications, together with the evidence of their cytotoxic effects. It has been shown that chemical functionalization extends the applications of CNTs, conferring them new functions that cannot otherwise be acquired by pristine CNTs, but also impacts on biological response to CNTs, modifying their toxicological profile. We assessed the onset of pulmonary toxic effects caused by pristine MW-CNTs and functionalized MW-NH? or MW-COOH, 16 days after intratracheal instillation (1 mg/kg b.w.); major endpoints tested included (i) histopathology of lung (Haematoxylin/Eosin Staining), (ii) apoptotic/proliferating features examined by TUNEL and PCNA immunostaining, and (iii) presence/distribution of (1) Transforming Growth Factor-beta1 (TGF?1), (2) Interleukin-6 (IL-6) and (3) Collagen (Type I) investigated by immunochemical methods, as markers of lung toxicity, inflammation, and fibrosis, respectively. Lung histopathology from exposed animals showed dark, particulate-laden macrophages, reflecting carbon nanomaterial engulfing, both at alveolar and bronchiolar levels, after treatment with all the tested CNTs. Alteration of lung architecture was also observed in several areas showing collapsed thick-walled alveoli and the presence of micro-haemorrhagic foci. TUNEL and PCNA, indicative of apoptosis and cell proliferation respectively, showed a significant increase of immunopositive cells at bronchiolar, alveolar and macrophagic levels, as expression of an improved cellular turnover. Increased immunoreactivity for pulmonary TGF?1 and IL-6 was observed in treated rats, particularly in bronchiolar areas, collapsed alveoli and at stromal level, while evident changes for collagen were not detected. Taken together these findings demonstrated the general pulmonary toxicity coupled with inflammatory response after in vivo exposure to CNTs, without overt signs of fibrosis and granuloma formation, irrespectively of nanotube functionalization.     

Enhanced conjugation of Candida rugosa lipase onto multiwalled carbon nanotubes using reverse micelles as attachment medium and application in nonaqueous biocatalysis

Three liquid phases (viz. aqueous, nonaqueous, and reverse micelles) were scrutinized as medium for attachment of the enzyme Candida rugosa lipase (CRL) onto multiwalled carbon nanotubes (CNTs). The nanotubes were functionalized to attain carboxyl and amino groups on their surfaces before enzyme conjugation. Transmission electron microscopy and Fourier transformation infrared spectroscopic studies were used for characterization of the nanotubes during the course of functionalization. High enzyme loadings associated with the functionalized CNTs were observed when reverse micelles were used as the attachment medium. In addition, high activity in terms of ester synthesis in organic solvents was also observed while using those preparations. The nanobioconjugates prepared using reverse micelles were found to be highly sturdy and exhibited appreciable operational stability of around 95 ± 3% at 20th cycle (in case of carboxylated nanotubes) and 90 ± 5% at 10th cycle (in case of aminated nanotubes) for esterification. This shows the potential application of reverse micelles as the attachment medium for surface active enzymes such as CRL onto CNTs. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:828–836, 2014     

Preparation and Toxicological Assessment of Functionalized Carbon Nanotube-Polymer Hybrids

Novel Carbon Nanotube-Polymer Hybrids were synthesized as potential materials for the development of membranes for water treatment applications in the field of Membrane Bioreactors (MBRs). Due to the toxicological concerns regarding the use of nanomaterials in water treatment as well as the rising demand for safe drinking water to protect public health, we studied the functionalization of MWCNTs and Thin-MWCNTs as to control their properties and increase their ability of embedment into porous anisotropic polymeric membranes. Following the growth of the hydrophilic monomer on the surface of the properly functionalized CNTs, that act as initiator for the controlled radical polymerization (ATRP) of sodium styrene sulfonate (SSNa), the antimicrobial quaternized phosphonium and ammonium salts were attached on CNTs-g-PSSNa through non-covalent bonding. In another approach the covalent attachment of quaternized ammonium polymeric moieties of acrylic acid-vinyl benzyl chloride copolymers with N,N-dimethylhexadecylamine (P(AA12-co-VBCHAM)) on functionalized CNTs has also been attempted. Finally, the toxicological assessment in terms of cell viability and cell morphological changes revealed that surface characteristics play a major role in the biological response of functionalized CNTs.     

Improved blood biocompatibility of composite film of chitosan/carbon nanotubes complex

Single-walled carbon nanotubes are novel molecular-scale wires having excellent anti-adhesion properties with regard to platelets. On the other hand, chitosan is a partially de-acetylated derivative of chitin that has a critical role in cell attachment and growth. The aim of this study was to investigate how carbon nanotubes improve the blood biocompatibility of chitosan film. We prepared composite films with various concentrations of chitosan/carbon nanotubes (CS/CNTs) (1.3–6.3 wt%). The sample surfaces were characterized by Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and contact angle measurements. The surface characterization revealed that the surface of the CS/CNTs composite film became more hydrophobic with increasing amounts of CNTs. Cell attachment tests using bovine aortic endothelial cells (BAECs) indicated that CS/CNTs composite films retained their cell adhesion ability. The blood compatibility of the CS/CNTs composite films was evaluated using the blood platelet adhesion and activation tests in vitro. Platelet adhesion results confirmed that platelet adhesion and the formation of a platelet network were inhibited on composite films with higher concentrations of CNTs (5.1 wt%). Our experimental results show that the novel composite film containing CS/CNTs possesses two paradoxical characteristics, namely, good adherence of endothelial cells and minimum adherence and activation of platelets, making this film a promising antithrombogenic material for use in the biomedical field.     

Role of carbon nanotubes (CNTs) in transgenic plant development

Carbon nanotubes (CNTs) are nanostructures, allotropes of carbon which are made up of graphene sheets wrapped around it forming cylindrical structures. CNTs have been regarded to have interesting and attractive physical and chemical properties and have been tremendously used in genetic engineering. Understanding the role of CNTs in development of transgenic plants, review of research papers in the field was done. CNTs are classified into two categories: the single-walled and multiwalled (MWCNTs) structures. They are valuable vectors in various biomedicine fields such as Gene delivery, Drug delivery, Immunotherapy, Tissue engineering, and Biomedical imaging and also, they deliver the DNA without damaging the cells. Based on recent studies, the functionalization of CNTs when combined with some other suitable molecules can drastically subside their toxic effects. Having unique properties such as small size, larger surface area is useful in delivering DNA into mammalian cells as well. Modifications in CNTs can make nucleic acids adhere to them even more efficiently. Also, MWCNTs are crucial in delivery DNA into the cytoplasm. Based on other methods, the CNTs-DNA are a preferred choice and the inclination toward double-stranded DNA is used over single-stranded DNA in gene delivery shows effective results. The only downside of CNTs is that they are hydrophobic and are difficult to form an aqueous solution, thus limiting their applicability. This review will aid you in comprehending useful knowledge related to a general overview of topics related to CNTs.     

A critical review of the occurrence of perfluoroalkyl acids in aqueous environments and their removal by adsorption onto carbon nanotubes

The presence of perfluoroalkyl acids (PFAAs) in aquatic environments is a cause of concern, due to their toxicity, possible ecological impact and adverse effects in man. The release of these pollutants into receiving water bodies occurs primarily through the discharge of untreated wastewater and industrial effluents. Consequently, there is a need to remediate wastewater containing these compounds before its discharge. In this review, the occurrence of PFAAs in water streams is reviewed, with the aim of providing in-depth information on the harmful effects arising through exposure to these pollutants by both man and the environment. One viable strategy for the removal of PFAAs from wastewaters is adsorption. This technique is discussed in relation to a number of conventional adsorbents and they are compared with the behaviour of a more effective adsorbent, namely, carbon nanotubes (CNTs). In particular, various functionalization strategies can increase the efficiency of CNTs for the removal of PFAAs. Sorption of PFAAs onto CNTs demonstrates good removal efficiencies and equilibrium is attained faster than with conventional adsorbents. This is attributed to the inherent properties of CNTs, such as large surface area/porosity, and the ease with which new functional groups are introduced onto the walls of the tubes. The adsorption mechanism of PFAAs is primarily enhanced through electrostatic interactions; however, other intermolecular forces, such as hydrogen bonding, hydrophobic interactions and ion-exchange, also play a role. This review aims at providing information on the occurrence and fate of PFAAs and the interactions involved in their removal from aqueous solutions by CNTs.     

Carbon nanotubes promote Cr(VI) reduction by alginate-immobilized Shewanella oneidensis MR-1

Bioreduction of hexavalent chromium (Cr(VI)) into trivalent one (Cr(III)) based on microbial immobilization techniques has been recognized as a promising way to remove Cr contaminants from wastewater. However, such a bioreduction process is inefficient due to limited electron transfer through the immobilization matrix. In this study, a modified immobilization process was proposed by impregnating carbon nanotubes (CNTs) into Ca-alginate beads, which were then used to immobilize Shewanella oneidensis MR-1 for enhanced Cr(VI) reduction. Compared with the free cells and the beads without CNTs, the AL/CNT/cell beads showed up to 4 times higher reduction rates, mainly attributed to an enhanced electron transfer by the CNTs. In addition, the dose of CNTs greatly improved the stability of beads, suggesting a high feasibility of the AL/CNT/cell beads for repeated use. The optimized CNT concentration, temperature and pH for Cr(VI) reduction by the AL/CNT/cell beads were 0.5%, 30 °C and 6.0–7.0, respectively.     

Influence of length on cytotoxicity of multi-walled carbon nanotubes against human acute monocytic leukemia cell line THP-1 in vitro and subcutaneous tissue of rats in vivo

Carbon nanotubes (CNTs) are single- or multi-cylindrical graphene structures that possess diameters of a few nanometers, while the length can be up to a few micrometers. These could have unusual toxicological properties, in that they share intermediate morphological characteristics of both fibers and nanoparticles. To date, no detailed study has been carried out to determine the effect of length on CNT cytotoxicity. In this paper, we investigated the activation of the human acute monocytic leukemia cell line THP-1 in vitro and the response in subcutaneous tissue in vivo to CNTs of different lengths. We used 220 nm and 825 nm-long CNT samples for testing, referred to as "220-CNTs" and "825-CNTs", respectively. 220-CNTs and 825-CNTs induced human monocytes in vitro, although the activity was significantly lower than that of microbial lipopeptide and lipopolysaccharide, and no activity appeared following variation in the length of CNTs. On the other hand, the degree of inflammatory response in subcutaneous tissue in rats around the 220-CNTs was slight in comparison with that around the 825-CNTs. These results indicated that the degree of inflammation around 825-CNTs was stronger than that around 220-CNTs since macrophages could envelop 220-CNTs more readily than 825-CNTs. However, no severe inflammatory response such as necrosis, degeneration or neutrophil infiltration in vivo was observed around both CNTs examined throughout the experimental period.     

Electrochemical behavior of L-cysteine and its detection at carbon nanotube electrode modified with platinum

The electrochemical behavior of L-cysteine (CySH) on platinum (Pt)/carbon nanotube (CNT) electrode was investigated by cyclic voltammetry. CNTs used in this study were grown directly on graphite disk by chemical vapor deposition. Pt was electrochemically deposited on the activated CNT/graphite electrode by electroreduction of Pt(IV) complex ion on the surface of CNTs. Among graphite, CNT/graphite, and Pt/CNT electrodes, improved electrochemical behavior of CySH oxidation was found with Pt/CNT electrode. On the other hand, a sensitive CySH sensor was developed based on Pt/CNT/graphite electrode. A linear calibration curve can be observed in the range of 0.5 microM-0.1 mM. The detection limit of the Pt/CNT electrode is 0.3 microM (signal/nose=3). Effects of pH, scan rate, and interference of other oxidizable amino acids were also investigated and discussed. Additionally, the reproducibility, stability, and applicability of the Pt/CNT electrode were evaluated.     

Hydrophobic interaction and structural changes in the solvent

The effect of structural changes in the solvent (usually water) on the thermodynamics of the hydrophobic interaction process is examined within the framework of classical statistical mechanics. The concept of the “structure of water” is first defined in a precise way, yet reflecting the conventional definition that has been, implicitly and qualitatively, employed by many authors. Using this concept, we proceed to show that structural changes in the solvent, induced by the hydrophobic interaction process, cannot affect the strength of the hydrophobic interaction. On the other hand, the entropy and enthalpy changes, associated with the same process, may well be affected. Some qualitative arguments are presented showing that large structural changes are expected from a complex solvent such as water.     

Binding of nucleobases with graphene and carbon nanotube: a review of computational studies

Functionalized carbon nanotubes (CNTs) constitute a new class of nanostructured materials that have vast applications in CNT purification and separation, biosensing, drug delivery, etc. Hybrids formed from the functionalization of CNT with biological molecules have shown interesting properties and have attracted great attention in recent years. Of particular interest is the hybridization of single- or double-stranded nucleic acid (NA) with CNT. Nucleobases, as the building blocks of NA, interact with CNT and contribute strongly to the stability of the NA–CNT hybrids and their properties. In this work, we present a thorough review of previous studies on the binding of nucleobases with graphene and CNT, with a focus on the simulation works that attempted to evaluate the structure and strength of binding. Discrepancies among these works are identified, and factors that might contribute to such discrepancies are discussed.     

Molecular dynamics simulation of doxorubicin adsorption on a bundle of functionalized CNT

In this study, molecular dynamics simulation is used to investigate the adsorption of an anticancer drug, doxorubicin, on bundles of functionalized single-walled carbon nanotubes (SWNTs) in an aqueous solution. Carboxylic group has been selected as the functional group. Molecular dynamics (MD) simulations are performed for both separated systems containing a SWNT bundle and a functionalized carbon nanotube bundle, and results are compared with existing experimental data. MD results show that doxorubicin can be adsorbed on CNTs using different methods such as entrapment within CNT bundle, attachment to the side wall of the CNT, and adsorption on the CNT inner cavity. For functionalized CNT, the adsorption of drugs on the functional groups is essential for predicting the enhancement of drug loading on the functionalized nanotubes. Furthermore, the adsorption behavior of doxorubicin on CNTs is fitted with Langmuir and Freundlich isotherm models. The results show that Langmuir model can predict the adsorption behavior of doxorubicin on CNTs more accurately than Freundlich model does. As predicted by this isotherm model, the adsorption process of doxorubicin on CNTs is relatively difficult, but it can be improved by increasing the functional groups on the CNTs surface.     

Study of PE and iPP orientations on the surface of carbon nanotubes by using molecular dynamic simulations

In this study, the early stage of interfacial crystallisation behaviour of low molecular weight polyethylene (PE) and isotactic polypropylene (iPP) oligomer on the surface of carbon nanotubes (CNTs) with different diameters, chiralities and topography structures was studied using MD simulations. We started to simulate the effect of CNTs chirality and diameter on PE molecular chain orientation, and then the effect of CNTs topography structure on PE and iPP molecular chain orientation was investigated. Finally, some experiments were carried out to prove the simulated results. Our study shows that for CNTs with a diameter comparable with the radius of gyration (R_g) of a polymer chain, an easy orientation of PE chains along CNTs axis is observed for all the systems of the CNTs with different chiralities due to a geometric confinement effect. For CNTs with a much larger diameter, multiple orientation of PE chains is induced on its surface due to the lattice matching between graphite lattice and PE molecular chains. In this case, the chirality of CNTs dominates the orientation of graphite lattice, which determines the orientation of PE chains arrangement on CNTs surface. More importantly, it was found that the groove structure formed by CNT bundles is very useful for the stabilisation of polymer chain, and thus facilitates the orientation of molecular chain along the long axis of CNTs. As a result, a novel nanohybrid shish–kebab (NHSK) structure with CNTs acting as central shish while polymer lamellae as kebab can be successfully obtained for both PE with zigzag conformation and iPP with helical conformation. This simulation result was well supported by the experimental observation. Our study could provide not only a deep understanding of the origin of the polymer chain orientation on CNTs surface but also the guidance for the preparation of polymer/CNTs nanocomposites with novel NHSK structure.