Thallium(III) complexes of the metalloligands [Pt2(μ-S)2(PPh3)4] and [Pt2(μ-Se)2(PPh3)4]

Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with the diarylthallium(III) bromides Ar₂TlBr [Ar = Ph and p-ClC₆H₄] in methanol gave good yields of the thallium(III) adducts [Pt₂(μ-S)₂(PPh₃)₄TlAr₂]⁺, isolated as their salts. The corresponding selenide complex [Pt₂(μ-Se)₂(PPh₃)₄TlPh₂]BPh₄ was similarly synthesised from [Pt₂(μ-Se)₂(PPh₃)₄], Ph₂TlBr and NaBPh₄. The reaction of [Pt₂(μ-S)₂(PPh₃)₄] with PhTlBr₂ gave [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]⁺, while reaction with TlBr₃ gave the dibromothallium(III) adduct [Pt₂(μ-S)₂(PPh₃)₄TlBr₂]⁺[TlBr₄]⁻. The latter complex is a rare example of a thallium(III) dihalide complex stabilised solely by sulfur donor ligands. X-ray crystal structure determinations on the complexes [Pt₂(μ-S)₂(PPh₃)₄TlPh₂]BPh₄, [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]BPh₄ and [Pt₂(μ-S)₂(PPh₃)₄TlBr₂][TlBr₄] reveal a greater interaction between the thallium(III) centre and the two sulfide ligands on stepwise replacement of Ph by Br, as indicated by shorter Tl-S and Pt?Tl distances, and an increasing S-Tl-S bond angle. Investigations of the ESI MS fragmentation behaviour of the thallium(III) complexes are reported.     

The arylation of [Pt2(μ-S)2(PPh3)4]

Routes to the synthesis of the mixed sulfide-phenylthiolate complex [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ have been explored; reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess Ph₂IBr proceeds readily to selectively produce this complex, which was structurally characterised as its PF₆⁻ salt. Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with other potent arylating reagents (1-chloro-2,4-dinitrobenzene and 1,5-difluoro-2,4-dinitrobenzene) also produce the corresponding nitroaryl-thiolate complexes [Pt₂(μ-S){μ-SC₆H₂(NO₂)₂X}(PPh₃)₄]⁺ (X = H, F). The complex [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ reacts with Me₂SO₄ to produce the mixed alkyl/aryl bis-thiolate complex [Pt₂(μ-SMe)(μ-SPh)(PPh₃)₄]²⁺, but corresponding reactions with the nitroaryl-thiolate complexes are plagued by elimination of the nitroaryl group and formation of [Pt₂(μ-SMe)₂(PPh₃)₄]²⁺. [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ also reacts with Ph₃PAuCl to give [Pt₂(μ-SAuPPh₃)(μ-SPh)(PPh₃)₄]²⁺.     

Synthesis and characterisation of [Pt2(μ-S)(μ-I)(PPh3)4] - A cationic iodo analogue of the metalloligand [Pt2(μ-S)2(PPh3)4]

Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with a number of transition metal-iodo complexes leads to the formation of the cationic iodo analogue [Pt₂(μ-S)(μ-I)(PPh₃)₄]⁺, identified using electrospray ionisation mass spectrometry (ESI MS). Synthetic routes to this complex were developed, using the reaction of [Pt₂(μ-S)₂(PPh₃)₄] with either [PtI₂(PPh₃)₂] or elemental iodine. The complex was characterised by NMR spectroscopy, ESI MS and an X-ray structure determination, which reveals the presence of a planar, disordered {Pt₂SI}⁺ core. Monitoring the iodine reaction by ESI MS allows the identification of various iodine species, including the short-lived intermediate [Pt₂(μ-S)₂(PPh₃)₄I]⁺, which allows a mechanism for the reaction to be proposed.     

Heterobimetallic platinum-bismuth aggregates derived from [Pt2(μ-S)2(PPh3)4]

The metalloligand [Pt₂(μ-S)₂(PPh₃)₄] reacts with Bi(S₂CNEt₂)₃ or Bi(S₂COEt)₃ in methanol to produce the orange cationic adducts [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂CNEt₂)₂]⁺ and [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂COEt)₂]⁺, respectively, isolated as their hexafluorophosphate salts. An X-ray structure determination on [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂CNEt₂)₂]PF₆ reveals the presence of a six-coordinated bismuth centre with an approximately nido-pentagonal bipyramidal coordination geometry. Fragmentation pathways for both complexes have been probed using electrospray ionisation mass spectrometry; ions [Pt₂(μ-S)₂(PPh₃)₂Bi(S₂CXEt_n)₂]⁺ (X = O, n = 1, X = N, n = 2) are formed by selective loss of two PPh₃ ligands, and at higher cone voltages the species [(Ph₃P)PtS₂Bi]⁺ is observed. Ions formed by loss of CS₂ are also observed for the xanthate but not the dithiocarbamate ions.     

N-Heterocyclic carbene gold(I) and silver(I) adducts of [Pt2(μ-S)2(PPh3)4]

Reaction of the metalloligand [Pt₂(μ-S)₂(PPh₃)₄] with the N-heterocyclic carbene (NHC) complexes IPrAuCl, IMesAuCl and IMesAgCl in methanol gave the first examples of metal adducts of [Pt₂(μ-S)₂(PPh₃)₄] that contain NHC ligands, namely [Pt₂(μ-S)₂(PPh₃)₄AuL]⁺ (L = IPr, IMes) and [Pt₂(μ-S)₂(PPh₃)₄AgIMes]⁺. The complexes were isolated as hexafluorophosphate salts. Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess IPrAuCl in refluxing methanol yielded only the mono-adduct, in contrast to the behaviour with the gold(I) phosphine complex Ph₃PAuCl, which undergoes double addition giving [Pt₂(μ-SAuPPh₃)₂(PPh₃)₄]²⁺. The X-ray structure of [Pt₂(μ-S)₂(PPh₃)₄AuIPr]PF₆ was determined and reveals that the ‘free’ sulfide is substantially sterically protected by the IPr ligand, accounting for the low reactivity towards addition of a second AgIPr⁺ moiety.     

Synthesis and characterisation of adducts of [Pt2(μ-S)2(PPh3)4] with organo-palladium and platinum-hydride substrates

The reactions of [Pt₂(μ-S)₂(PPh₃)₄] towards a range of palladium(II) complexes containing organometallic ligands (cyclopalladated N-donor ligands, η³-allyl, phenyl) have been explored, leading to the formation of a series of cationic, trinuclear sulfido-bridged aggregates containing {Pt₂PdS₂} cores. [Pt₂(μ-S)₂(PPh₃)₄] also reacts with the platinum(II) hydride complex trans-[PtHCl(PPh₃)₂] giving the adduct [Pt₂(μ-S)₂(PPh₃)₄PtH(PPh₃)]⁺. X-ray crystal structure determinations on the complexes [Pt₂(μ-S)₂(PPh₃)₄PdPh(PPh₃)]PF₆ and [Pt₂(μ-S)₂(PPh₃)₄PtH(PPh₃)]PF₆ are reported, and show the expected bis μ₃-sulfido aggregates with three square-planar metal centres.     

Thiotungstates containing the syn-[W2(O/S)2(μ-S)2] (E = O, S) and cuboidal [W2Cu2(μ3-S)4] cores

Reaction of [W^VIS₄]²⁻ with ethane-1,2-dithiol edtH₂ in the presence of the sulfide scavenger Cd²⁺ yielded the dinuclear tungstate syn-[{(edt)W^V(O/S)}₂(μ-S)₂]²⁻ (1), with the terminal S/O disordered over the two tungsten sites in the ratio 0.8:02. In the presence of thiocyanate, phosphine and CuI, the anionic cuboidal clusters of composition [{(SCN)₃W^V}₂{Cu^I(PPh₃)}₂(μ₃-S)₄]²⁻ (2) and (3, diphos = 1,2-bis(o-diphenylphosphinophenyl)ethane), and possibly via an intermediate [{(SCN)₃W^VS}₂(μ-S)₂]⁴⁻. The crystal and molecular structures of [Et₄N]₂1, [Et₄N]₂2 · H₂O and [Et₄N]₂3 · H₂O have been determined.     

Synthesis and characterization of triphenylphosphine stabilized silver α,β-unsaturated carboxylate: Crystal structure of [Ag(O2CCHC(CH3)2)(PPh3)2]

A series of triphenylphosphine coordinated silver α,β-unsaturated carboxylates of type [Ag(O₂CR)(PPh₃)_n: n = 1, R = CH₃CHCH (2a), (CH₃)₂CCH (2b), CH₃CH₂CHCH (2c), CH₃CH₂CH₂CHCH (2d), PhCHCH (2e), CH₂CH (2f); n = 2, CH₃CHCH (3a), (CH₃)₂CCH (3b), CH₃CH₂CHCH (3c), CH₃CH₂CH₂CHCH (3d)] were prepared by reaction of relative silver carboxylates (1a-1f) with triphenylphosphine in chloroform. These complexes were obtained in high yields and characterized by elemental analysis, ¹H NMR, ¹³C NMR, ³¹P NMR and IR spectroscopy. Thermal stability of the complexes has been determined by TG analysis. The molecular structure of [Ag((O₂CCHC(CH₃)₂))(PPh₃)₂] (3b) shows that the senecioato ligand is chelated with silver atom and generate, a distorted tetrahedron.     

Synthesis of some pentanuclear platinum clusters [Pt5(CO)6(L)4]. The X-ray structure of [Pt5(μ-CO)5(CO)(PCy3)4]

[Pt₅(μ-CO)₅(CO)L₄] (L = PPh₃1, PPh₂Bz 2, AsPh₃3, PEt₃4, PCy₃5) have been synthesized by reacting [Pt₃(μ-CO)₃(PR₃)₃] with H₂O₂ (1 and 2), by reduction of cis-[PtCl₂(CO)(PEt₃)] with Zn dust (4), and by the Zn reduction of [Pt₃(μ-CO)₃(PCy₃)₃] in the presence of [PtCl₂(CH₃CN)₂] (5). Complex 5 has not been observed previously and has been characterized by X-ray crystallography. Oxidation of the phosphine ligands with H₂O₂ is a new way to synthesize 1 and 2. The first complete NMR characterization of these complexes has also been achieved, and showed that these pentanuclear cluster complexes exhibit similar stereochemistries in solution and in the solid state. The observed ¹J_Pt-Pt values do not have any correlation with the corresponding bond lengths, again pointing out the irregular behaviour of such parameter in Pt complexes.     

Reactivity of [PdCl(μ-med)]2 with monodentate or bidentate ligands. Structure of the dinuclear complexes [Pd(μ-med)(PPh3)]2(BF4)2 and [Pd(μ-med)(bpy)]2(BF4)2. [Hmed=N-(2-mercaptoethyl)-3,5-dimethylpyrazole]

Treatment of the ligand N-(2-mercaptoethyl)-3,5-dimethylpyrazole with [Pd(CH₃COO)₂]₃ and reaction of [PdCl(μ-med)]₂ with pyridine (py) or triphenylphosphine (PPh₃) in the presence of AgBF₄ produced the following complexes: [Pd(CH₃COO)(μ-med)]₂, [Pd(μ-med)(py)]₂(BF₄)₂ and [Pd(μ-med)(PPh₃)]₂(BF₄)₂. Similar reactions carried out with 2,2^′-bipyridine (bpy) or 1,3-bis(diphenylphosphino)propane (dppp) produced [Pd(μ-med)(bpy)]_x(BF₄)_x (x=1 or 2) and [Pd(μ-med)(dppp)]_x(BF₄)_x (x=1 or 2). Treatment of [Pd(μ-med)(bpy)]_x(BF₄)_x with [PdCl₂(CH₃CN)₂] produced [Pd₃Cl₂(μ-med)₂(bpy)₂](BF₄)₂. Treatment of [Pd(μ-med)(dppp)]_x(BF₄)_x with [PdCl₂(CH₃CN)₂] produced a mixture of [Pd(μ-Cl)(dppp)]₂(BF₄)₂ and [Pd(μ-med)₂(dppp)]²⁺. X-ray crystal structures of [Pd(μ-med)(PPh₃)]₂(BF₄)₂ · 2CH₃CN and [Pd(μ-med)(bpy)]₂(BF₄)₂ · 0.5CH₃OH are presented.     

Synthesis, characterization and molecular structures of the trichloro-η-benzoyldiazenido [ReCl3{η-NNC(O)Ph}(PPh3)2] and oxorhenium [ReOCl2(OMe)(PPh3)2] complexes derived from reactions of [ReCl2{η-NNC(O)Ph}(PPh3)2] with a peroxide or dioxygen

The reactions of [ReCl₂{η²-NNC(O)Ph}(PPh₃)₂] (1) with t-BuOOH, in C₆H₆ or chlorinated solvents, at room temperature or with MeOH upon reflux in air lead to the trichloro-η¹-benzoyldiazenido [ReCl₃{η¹-NNC(O)Ph}(PPh₃)₂] (2) or the methoxy-oxo [ReOCl₂(OMe)(PPh₃)₂] (3) compound, respectively, which have been characterized by spectroscopic and FAB⁺-MS methods, elemental and single crystal X-ray diffraction analyses. They show distorted octahedral coordinaiton geometries with trans triphenylphosphine ligands, an essentially linear η¹-diazenido moiety in 2 and the methoxy group in 3 in trans position to the oxo ligand.     

Dinuclear platinum complexes with designer thiolate ligands from the monoalkylation of [Pt2(μ-S)2(PPh3)4]

Alkylation reactions of the nucleophilic platinum(II) sulfide complex [Pt₂(μ-S)₂(PPh₃)₄] with functionalised alkylating agents have been investigated as a versatile synthetic route to dinuclear, cationic sulfide-thiolate complexes of the type [Pt₂(μ-S)(μ-SR)(PPh₃)₄]⁺, extending the range of thiolate complexes that can be prepared using this methodology. A wide range of functional groups can be incorporated, using appropriate alkylating agents, and include ketone, ester, amide, hydrazone, semicarbazone, thiosemicarbazone, oxime, guanidine, urea and thiourea groups.     

A one-dimensional copper (II) coordination polymer [Cu3(ampym)2(μ1,1-N3)4(μ1,3-N3)2(dmf)2]n (ampym = 2-aminopyrimidine) containing both end-on and end-to-end azido bridges

A new polynuclear copper (II) complex, derived from the azido-bridging ligand and 2-aminopyrimidine, has been synthesized and its 3-D structure has been determined by X-ray diffraction methods at two different temperatures. The compound crystallizes in the triclinic system space group, with the central copper atom lying on an inversion centre. The crystal structure is built up by trinuclear units (each of them contains two double end-on azido bridges) linked through two azide ions in an end-to-end (EE) fashion, to yield the polymer chain [Cu₃(ampym)₂(μ_1,1-N₃)₄(μ_1,3-N₃)₂(dmf)₂]_n. Magnetic susceptibility measurement shows a ferromagnetic interaction above 30 K, whereas a weak anti-ferromagnetic interaction prevails in the range of 30-2 K.     

SS Bond-activation of diorganyl disulfide by anionic [Mn(CO)5]: crystal structures of [Mn(SC5H4NO)3] and [(CO)3Mn(μ-SR)3Co(μ-SR)3Mn(CO)3] (R=C6H4NHCOPh)

The SS bond-activation of diorganyl disulfide by the anionic metal carbonyl fragment [Mn(CO)₅]⁻ gives rise to an extensive chemistry. Oxidative decarbonylation addition of 2,2′-dithiobis(pyridine-N-oxide) to [Mn(CO)₅]⁻, followed by chelation and metal-center oxidation, led to the formation of [Mn^II(SC₅H₄NO)₃]⁻ (1). The effective magnetic moment in solid state by SQUID magnetometer was 5.88 μ_B for complex 1, which is consistent with the Mn^II having a high-spin d⁵ electronic configuration in an octahedral ligand field. The average Mn(II)S, SC and NO bond lengths of 2.581(1), 1.692(4) and 1.326(4) Å, respectively, indicate that the negative charge of the bidentate 1-oxo-2-thiopyridinato [SC₅H₄NO]⁻ ligand in complex 1 is mainly localized on the oxygen atom. The results are consistent with thiolate-donor [SC₅H₄NO]⁻ stabilization of the lower oxidation state of manganese (Mn(I)), while the O,S-chelating [SC₅H₄NO]⁻ ligand enhances the stability of manganese in the higher oxidation state (Mn(II)). Activation of SS bond as well as OH bond of 2,2′-dithiosalicylic acid by [Mn(CO)₅]⁻ yielded [(CO)₃Mn(μ-SC₆H₄C(O)O)₂Mn(CO)₃]²⁻ (4). Oxidative addition of bis(o-benzamidophenyl) disulfide to [Mn(CO)₅]⁻ resulted in the formation of cis-[Mn(CO)₄(SR)₂]⁻ (R=C₆H₄NHCOPh) which was employed as a chelating metallo ligand to synthesize heterotrinuclear [(CO)₃Mn(μ-SR)₃Co(μ-SR)₃Mn(CO)₃]⁻ (8) possessing a homoleptic hexathiolatocobalt(III) core.     

Reaction of [Pt3(μ-CO)3(PBu3)3] with activated olefins and alkynes: the X-ray-structure of [Pt(CO)(PBu3)(CF3CCCF3)]

The reactions of the triangulo-cluster [Pt₃(μ-CO)₃(P^tBu₃)₃] with activated olefins and alkynes have been examined under various conditions. At low temperature, cluster fragmentation occurs yielding the Pt(0) complexes [Pt(CO)(P^tBu₃)(olefin)] (olefin = maleic anhydride and maleimide), while di(tert-butyl)acetylenedicarboxilate reacts quantitatively giving the dinuclear Pt(0) complex [Pt₂(CO)₂(P^tBu₃)₂(μ-η²:η²-^tBuO₂CCCCO₂^tBu)]. At higher temperature and in the presence of alkyne in large excess, the latter dimer converts quantitatively to the monomers [Pt(CO)(P^tBu₃)(alkyne)] (alkyne = CF₃CCCF₃ and ^tBuO₂CCCCO₂^tBu). The stereochemistry of these complexes has been established by NMR and IR measurements. The structure of [Pt(CO)(P^tBu₃)(CF₃CCCF₃)] was confirmed by X-ray diffraction analysis.     

The reactivity of [Pt2(μ-S)2(PPh3)4] towards difunctional chloroacetamide alkylating agents: Formation of cyclized or bridged products

The reactions of [Pt₂(μ-S)₂(PPh₃)₄] towards some bis(chloroacetamide) alkylating agents have been investigated. Reaction with one mole equivalent of the hydrazine-derived compound ClCH₂C(O)NHNHC(O)CH₂Cl led to the cyclized product [Pt₂{SCH₂C(O)NHNHC(O)CH₂S}(PPh₃)₄]²⁺ which showed two different PPh₃ environments in the ³¹P{¹H} NMR spectrum, as a result of non-fluxional behavior of the dithiolate ligand in solution. Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with the ortho and para isomers of the phenylenediamine-derived bis(chloroacetamides) ClCH₂C(O)NHC₆H₄NHC(O)CH₂Cl gave tetrametallic complexes containing two {Pt₂S₂} moieties spanned by the CH₂C(O)NHC₆H₄NHC(O)CH₂ group. Both the ortho and para isomers were crystallographically characterized; in the ortho isomer there is intramolecular CO···H-N and S···H-N hydrogen bonding involving the two amide groups.     

A structural investigation of the heterobimetallic carbocation complex [Cp(CO)2Fe{μ-CH2CH(CH2)3}W(CO)3Cp]BPh4

The reaction of [Cp^∗(CO)₂Fe{μ-CH₂CH(CH₂)₃}W(CO)₃Cp]PF₆ with NaBPh₄ in dry acetone gave [Cp^∗(CO)₂Fe{μ-CH₂CH(CH₂)₃}W(CO)₃Cp]BPh₄. The bond Fe-C_β is shorter than that reported for the shorter chain carbocationic complexes. The data suggest that metallacyclopropane character is on the iron side of the molecule both in the solid state and in solution.     

Synthesis and structural characterization of the molecular loop [cis-Mo2(N,N-di-p-anisylformamidinate)2]2(O2C-CHCCH-CO2)2

A new molecular loop composed of two quadruply bonded Mo₂(DAniF)₂ units (DAniF=N,N^′-di-p-anisylformamidinate) linked by two chiral allene-1,3-dicarboxylate anions has been prepared from the reaction of [cis-Mo₂(DAniF)₂(MeCN)₄](BF₄)₂ with the bis(tetraethylammonium) salt of allene-1,3-dicarboxylic acid. This compound, [cis-Mo₂(DAniF)₂]₂(O₂C-CHCCH-CO₂)₂ (1), has been characterized by X-ray crystallography and by ¹H NMR and UV-Vis spectroscopy. The molecule possesses a center of inversion and hence is meso. There is only weak electronic coupling between the two Mo₂ ⁴⁺ units as revealed by electrochemical measurements.     

Thiolato-bridged “Linear” trinuclear platinum complexes [Pt3(μ-SR)4(dppm)2]

Thiolato-bridged tri- and dinuclear platinum complexes of the types [Pt₃(μ-SR)₄(dppm)₂]²⁺ (1) and [Pt₂(μ-ER)₂(dppm)₂]²⁺ (2) (E=S or Se; R=alkyl or aryl; dppm=bis(diphenylphosphino)methane) have been prepared using the mononuclear precursors [Pt(ER)₂(dppm)]. The complexes have been characterized by NMR (¹H, ¹³C, ³¹P, ¹⁹⁵Pt), FT-IR and FAB mass spectral data. The structure of [Pt₃(μ-SC₆H₄CH₃-4)₄(dppm)₂][CF₃SO₃]₂ · 6CH₂Cl₂ (1d), has been established through X-ray crystallography, revealing a zig-zag arrangement of the three coordination spheres around the platinum atoms.