The interrelationship between ligand binding and self-association of the folate binding protein. The role of detergent–tryptophan interaction

Background

The folate binding protein (FBP) regulates homeostasis and intracellular trafficking of folic acid, a vitamin of decisive importance in cell division and growth. We analyzed whether interrelationship between ligand binding and self-association of FBP plays a significant role in the physiology of folate binding.

Methods

Self-association behavior of apo- and holo-FBP was addressed through size exclusion chromatography, SDS-PAGE, mass spectrometry, surface plasmon resonance and fluorescence spectroscopy.

Results

Especially holo-FBP exhibits concentration-dependent self-association at pH 7.4 (pI), and is more prone to associate into stable complexes than apo-FBP. Even more pronounced was the tendency to complexation between apo-FBP and holo-FBP in accord with a model predicting association between apo and holo monomers [19]. This will lead to removal of apo monomers from the reaction scheme resulting in a weak incomplete ligand binding similar to that observed at FBP concentrations < 10 nM. The presence of synthetic and natural detergents normalized folate binding kinetics and resulted in appearance of monomeric holo-FBP. Fluorescence spectroscopy indicated molecular interactions between detergent and tryptophan residues located in hydrophobic structures of apo-FBP which may participate in protein associations.

General significance

Self-association into multimers may protect binding sites, and in case of holo-FBP even folate from biological degradation. High-affinity folate binding in body secretions, typically containing 1–10 nM FBP, requires the presence of natural detergents, i.e. cholesterol and phospholipids, to avoid complexation between apo- and holo-FBP.     

The interrelationship between ligand binding and thermal unfolding of the folate binding protein. The role of self-association and pH

The present study utilized a combination of DLS (dynamic light scattering) and DSC (differential scanning calorimetry) to address thermostability of high-affinity folate binding protein (FBP), a transport protein and cellular receptor for the vitamin folate. At pH 7.4 (pI = 7–8) ligand binding increased concentration-dependent self-association of FBP into stable multimers of holo-FBP. DSC of 3.3 μM holo-FBP showed Tm (76 °C) and molar enthalpy (146 kcal M^− 1) values increasing to 78 °C and 163 kcal M^− 1 at 10 μM holo-FBP, while those of apo-FBP were 55 °C and 105 kcal M^− 1. Besides ligand binding, intermolecular forces involved in concentration-dependent multimerization thus contribute to the thermostability of holo-FBP. Hence, thermal unfolding and dissociation of holo-FBP multimers occur simultaneously consistent with a gradual decrease from octameric to monomeric holo-FBP (10 μM) in DLS after a step-wise rise in temperature to 78 °C ≈ Tm. Stable holo-FBP multimers may protect naturally occurring labile folates against decomposition or bacterial utilization. DSC established an interrelationship between diminished folate binding at pH 5, especially in NaCl-free buffers, and low thermostability. Positively charged apo-FBP was almost completely unfolded and aggregated at pH 5 (Tm 38 °C) and holo-FBP, albeit more thermostable, was labile with aggregation tendency. Addition of 0.15 M NaCl increased thermostability of apo-FBP drastically, and even more so that of holo-FBP. Electrostatic forces thus seem to contribute to a diminished thermostability at low pH. Fluorescence spectroscopy after irreversible thermal unfolding of FBP revealed a weak-affinity folate binding.     

Effects of guanidine hydrochloride on the conformation and enzyme activity of streptomycin adenylyltransferase monitored by circular dichroism and fluorescence spectroscopy

Equilibrium denaturation of streptomycin adenylyltransferase (SMATase) has been studied by CD spectroscopy, fluorescence emission spectroscopy, and binding of the hydrophobic dye 1-anilino-8-naphthalene sulfonic acid (ANS). Far-UV CD spectra show retention of 90% native-like secondary structure at 0.5 M guanidine hydrochloride (GdnHCl). The mean residue ellipticities at 222 nm and enzyme activity plotted against GdnHCl concentration showed loss of about 50 and 75% of secondary structure and 35 and 60% of activity at 0.75 and 1.5 M GdnHCl, respectively. At 6 M GdnHCl, there was loss of secondary structure and activity leading to the formation of GdnHCl-induced unfolded state as evidenced by CD and fluorescence spectroscopy as well as by measuring enzymatic activity. The denaturant-mediated decrease in fluorescence intensity and 5 nm red shift of λ_max point to gradual unfolding of SMATase when GdnHCl is added up from 0.5 M to a maximum of 6 M. Decreasing of ANS binding and red shift (∼5 nm) were observed in this state compared to the native folded state, indicating the partial destruction of surface hydrophobic patches of the protein molecule on denaturation. Disruption of disulfide bonds in the protein resulted in sharp decrease in surface hydrophobicity of the protein, indicating that the surface hydrophobic patches are held by disulfide bonds even in the GdnHCl denatured state. Acrylamide and potassium iodide quenching of the intrinsic tryptophan fluorescence of SMATase showed that the native protein is in folded conformation with majority of the tryptophan residues exposed to the solvent, and about 20% of them are in negatively charged environment. Published in Russian in Biokhimiya, 2006, Vol. 71, No. 11, pp. 1514–1523.     

A hydrophobicity on skeletal muscle actin molecule modulated by nucleotide binding at a second site

A hydrophobic region was detected on skeletal muscle actin molecule by change of fluorescence of a hydrophobic probe, 8-anilino-1-naphthalene-sulfonate (ANS). In previous papers (Hozumi, T. (1988) Biochem. Int. 17, 171-178; Hozumi, T. (1988) J. Biochem. (Tokyo) 104, 285-288) evidences for a second nucleotide binding site on a actin molecule were reported and it was shown that nucleotide interaction at the site induces conformational changes in actin molecule. The character of non-polar region of actin molecule was altered by the binding of nucleotide at a new site of actin molecule, the fluorescence of the ANS-actin being greatly decreased, and its emission maximum undergoing a red-shift. These results show that nucleotide binding at a second site on actin changes its conformation, and the conformational change induces changes in the native surface hydrophobicity on actin molecule.     

Use of a hydrophobic dye to indirectly probe the structural organization and conformational plasticity of molecules in amorphous aggregates of carbonic anhydrase

Understanding protein aggregation may hold important clues to understanding what goes wrong with protein folding in neurodegenerative disorders and in bioreactors in which proteins are overexpressed. Unfortunately, aggregates tend to be intractable to most standard methods of biochemical investigation. Thus, relatively little is even now known about the micro- and macro-structural features of aggregates. To gain insights into the thermal aggregation of a model globular protein [bovine carbonic anhydrase (BCA)], we have used spectrofluorimetry to examine the binding of a hydrophobic dye, 8-anilinonaphthalene sulfonate (ANS), to hydrophobic clusters on the protein's surface both before and after heat-induced aggregation and upon cooling. Whereas native BCA shows no surface hydrophobicity, thermally aggregated BCA displays significant hydrophobicity both in the heated state and upon cooling. The timing of the addition of ANS in the course of aggregation makes no net difference to the ANS bound; we argue that this suggests that aggregates are essentially porous. Cooling of aggregates results in a dramatic, fully reversible increase in ANS binding that cannot be explained by the temperature dependence of fluorescence quantum yield alone; we argue that the enhancement of fluorescence upon cooling indicates possible structural consolidation of unfolded regions within aggregates (akin to refolding), with the required structural reorganization being facilitated by porosity. Finally, implications of porosity in aggregates are discussed, in particular, for the possible immobilization of enzymes through fusion with aggregation-prone protein domains.     

Conformational changes induced by binding of divalent cations to calregulin

Scatchard analysis of equilibrium dialysis studies have revealed that in the presence of 3.0 mM MgCl2 and 150 mM KCl, calregulin has a single binding site for Ca2+ with an apparent dissociation constant (apparent Kd) of 0.05 microM and 14 binding sites for Zn2+ with apparent Kd(Zn2+) of 310 microM. Ca2+ binding to calregulin induces a 5% increase in the intensity of intrinsic fluorescence and a 2-3-nm blue shift in emission maximum. Zn2+ binding to calregulin causes a dose-dependent increase of about 250% in its intrinsic fluorescence intensity and a red shift in the emission maximum of about 11 nm. Half-maximal wavelength shift occurs at 0.4 mol of Zn2+/mol of calregulin, and 100% of the wavelength shift is complete at 2 mol of Zn2+/mol of calregulin. In the presence of Zn2+ and calregulin the fluorescence intensity of the hydrophobic fluorescent probe 8-anilino-1-napthalenesulfonate (ANS) was enhanced 300-400% with a shift in emission maximum from 500 to 480 nm. Half-maximal Zn2+-induced shift in ANS emission maximum occurred at 1.2 mol of Zn2+/mol of calregulin, and 100% of this shift occurred at 6 mol of Zn2+/mol of calregulin. Of 12 cations tested, only Zn2+ and Ca2+ produced changes in calregulin intrinsic fluorescence, and none of these metal ions could inhibit the Zn2+-induced red shift in intrinsic fluorescence emission maximum. Furthermore, none of these cations could inhibit or mimic the Zn2+-induced blue shift in ANS emission maximum. These results suggest that calregulin contains distinct and specific ligand-binding sites for Ca2+ and Zn2+. While Ca2+ binding results in the movement of tryptophan away from the solvent, Zn2+ causes a movement of tryptophan into the solvent and the exposure of a domain with considerable hydrophobic character.     

Binding of ions and hydrophobic probes to alpha-lactalbumin and kappa-casein as determined by analytical affinity chromatography

The technique of analytical affinity chromatography was extended to characterize binding of ions and hydrophobic probes to proteins. Using the immobilized protein mode of chromatography, alpha-lactalbumin and kappa-casein were covalently attached to 200-nm-pore-diameter controlled-pore glass beads and accommodated for high-performance liquid chromatography. The existence of a high affinity binding site (Kdiss = 0.16 microM) (site I) for calcium ion in alpha-lactalbumin was confirmed by chromatography of [45Ca2+]. In addition, chromatography of the hydrophobic probes, 1-(phenylamino)-8-naphthalene-sulfonate (ANS)2 and 4,4'-bis[1-(phenylamino)-8-naphthalenesulfonate (bis-ANS) indicated that Ca2+ bound to a second site (presumably the zinc site or site II) with weaker affinity. Dissociation constants obtained for apo-alpha-lactalbumin were about 80 microM for ANS and 4.7 microM for bis-ANS in the absence of sodium ion. Addition of Ca2+ initially caused a reduction in surface hydrophobicity (lowered affinity for the probe dyes) followed by an increase at higher Ca2+ concentrations (greater than 0.5 mM), suggesting that occupancy of site II restores an apo-like conformation to the protein. Moreover, the effect of Zn2+ was similar to that observed in the higher Ca2+ concentration range, whereas Na+ apparently bound to site I. A calcium binding site of moderate affinity also exists in kappa-casein (Kdiss = 15.6 microM). A cluster of negative charges, probably including the orthophosphate group, most likely comprise this binding site. By preventing self-association, analytical affinity chromatography permits microscale characterization of ligand equilibria in proteins that are unaffected by protein-protein interactions.     

Expression of the sucrose binding protein from soybean: renaturation and stability of the recombinant protein

The sucrose binding protein (SBP) belongs to the cupin family of proteins and is structurally related to vicilin-like storage proteins. In this investigation, a SBP isoform (GmSBP2/S64) was expressed in E. coli and large amounts of the protein accumulated in the insoluble fraction as inclusion bodies. The renatured protein was studied by circular dichroism (CD), intrinsic fluorescence, and binding of the hydrophobic probes ANS and Bis-ANS. The estimated content of secondary structure of the renatured protein was consistent with that obtained by theoretical modeling with a large predominance of beta-strand structure (42%) over the alpha-helix (9.9%). The fluorescence emission maximum of 303 nm for SBP2 indicated that the fluorescent tryptophan was completely buried within a highly hydrophobic environment. We also measured the equilibrium dissociation constant (K(d)) of sucrose binding by fluorescence titration using the refolded protein. The low sucrose binding affinity (K(d)=2.79+/-0.22 mM) of the renatured protein was similar to that of the native protein purified from soybean seeds. Collectively, these results indicate that the folded structure of the renatured protein was similar to the native SBP protein. As a member of the bicupin family of proteins, which includes highly stable seed storage proteins, SBP2 was fairly stable at high temperatures. Likewise, it remained folded to a similar extent in the presence or absence of 7.6M urea or 6.7 M GdmHCl. The high stability of the renatured protein may be a reminiscent property of SBP from its evolutionary relatedness to the seed storage proteins.     

Characterization of the binding of 8-anilinonaphthalene sulfonate to rat class Mu GST M1-1

Molecular docking and ANS-displacement experiments indicated that 8-anilinonaphthalene sulfonate (ANS) binds the hydrophobic site (H-site) in the active site of dimeric class Mu rGST M1-1. The naphthalene moiety provides most of the van der Waals contacts at the ANS-binding interface while the anilino group is able to sample different rotamers. The energetics of ANS binding were studied by isothermal titration calorimetry (ITC) over the temperature range of 5-30 degrees C. Binding is both enthalpically and entropically driven and displays a stoichiometry of one ANS molecule per subunit (or H-site). ANS binding is linked to the uptake of 0.5 protons at pH 6.5. Enthalpy of binding depends linearly upon temperature yielding a DeltaC(p) of -80+/-4 cal K(-1) mol(-1) indicating the burial of solvent-exposed nonpolar surface area upon ANS-protein complex formation. While ion-pair interactions between the sulfonate moiety of ANS and protein cationic groups may be significant for other ANS-binding proteins, the binding of ANS to rGST M1-1 is primarily hydrophobic in origin. The binding properties are compared with those of other GSTs and ANS-binding proteins.     

Protein‐spanning water networks and implications for prediction of protein–protein interactions mediated through hydrophobic effects

Hydrophobic effects, often conflated with hydrophobic forces, are implicated as major determinants in biological association and self‐assembly processes. Protein–protein interactions involved in signaling pathways in living systems are a prime example where hydrophobic effects have profound implications. In the context of protein–protein interactions, a priori knowledge of relevant binding interfaces (i.e., clusters of residues involved directly with binding interactions) is difficult. In the case of hydrophobically mediated interactions, use of hydropathy‐based methods relying on single residue hydrophobicity properties are routinely and widely used to predict propensities for such residues to be present in hydrophobic interfaces. However, recent studies suggest that consideration of hydrophobicity for single residues on a protein surface require accounting of the local environment dictated by neighboring residues and local water. In this study, we use a method derived from percolation theory to evaluate spanning water networks in the first hydration shells of a series of small proteins. We use residue‐based water density and single‐linkage clustering methods to predict hydrophobic regions of proteins; these regions are putatively involved in binding interactions. We find that this simple method is able to predict with sufficient accuracy and coverage the binding interface residues of a series of proteins. The approach is competitive with automated servers. The results of this study highlight the importance of accounting of local environment in determining the hydrophobic nature of individual residues on protein surfaces. Proteins 2014; 82:3312–3326. © 2014 Wiley Periodicals, Inc.     

1-Anilino-8-Naphthalene Sulfonate (ANS) Is Not a Desirable Probe for Determining the Molten Globule State of Chymopapain

The molten globule (MG) state of proteins is widely detected through binding with 1-anilino-8-naphthalene sulphonate (ANS), a fluorescent dye. This strategy is based upon the assumption that when in molten globule state, the exposed hydrophobic clusters of protein are readily bound by the nonpolar anilino-naphthalene moiety of ANS molecules which then produce brilliant fluorescence. In this work, we explored the acid-induced unfolding pathway of chymopapain, a cysteine proteases from Carica papaya, by monitoring the conformational changes over a pH range 1.0–7.4 by circular dichroism, intrinsic fluorescence, ANS binding, acrylamide quenching, isothermal titration calorimetry (ITC) and dynamic light scattering (DLS). The spectroscopic measurements showed that although maximum ANS fluorescence intensity was observed at pH 1.0, however protein exhibited ∼80% loss of secondary structure which does not comply with the characteristics of a typical MG-state. In contrast at pH 1.5, chymopapain retains substantial amount of secondary structure, disrupted side chain interactions, increased hydrodynamic radii and nearly 30-fold increase in ANS fluorescence with respect to the native state, indicating that MG-state exists at pH 1.5 and not at pH 1.0. ITC measurements revealed that ANS molecules bound to chymopapain via hydrophobic interaction were more at pH 1.5 than at pH 1.0. However, a large number of ANS molecules were also involved in electrostatic interaction with protein at pH 1.0 which, together with hydrophobically interacted molecules, may be responsible for maximum ANS fluorescence. We conclude that maximum ANS-fluorescence alone may not be the criteria for determining the MG of chymopapain. Hence a comprehensive structural analysis of the intermediate is essentially required.     

Unfolding of lysozyme by breaking its disulphide bridges results in exposure of hydrophobic sites.

The interaction of 1-anilino-naphthalene-8-sulphonate (ANS), a probe whose fluorescence is strongly dependent on hydrophobicity of the environment, with native lysozyme and lysozyme partially unfolded by breaking the disulphide bridges and reacting the free -SH groups with iodoacetamide, has been investigated. Monitoring the intensity of ANS fluorescence and the position of the emission maximum in the presence of native and partially unfolded lysozyme indicated that unfolding resulted in the exposure of hydrophobic sites. Hydrophobic sites could not be detected when native and partially unfolded lysozyme were denatured with urea or guanidinium chloride. Protein components of the cells export machinery like 'chaperones' associate only with partially unfolded proteins and not native, folded proteins. Hence, hydrophobic regions of proteins, exposed on partial unfolding, could be the sites of recognition by 'chaperone' proteins.     

Protein-flexible chain polymer interactions to explain protein partition in aqueous two-phase systems and the protein-polyelectrolyte complex formation

Complexes formation between two model proteins (catalase and chymotrypsin) and polyelectrolytes (polyvinyl sulphonate and polyacrilic acid) and a non-charged flexible chain polymer (PCF) as polyethylene propylene oxide (molecular mass 8400) was studied by a spectroscopy technique combination: UV absorption, fluorescence emission and circular dichroism. All the polymers increase the protein surface hydrophobicity (S(0)) parameter value as a proof of the modification of the protein surface exposed to the solvent. Chymotrypsin showed an increase in its biological activity in polymer presence, which suggests a change in the superficial microenvironment. The decrease in the biological activity of catalase might be due to a competition between the polymer and the substrate. This result agrees with the polymer effect on the catalase superficial hydrophobic area. It was found that, when flexible chain polymers increase protein stability and the enzymatic activity they could be used to isolate this enzyme without inducing loss of protein enzymatic activity. Our findings suggest that the interactions are dependent on the protein physico-chemical parameters such as: isoelectric pH, hydrophobic surface area, etc.     

Interaction of a hydrophobic fluorescent probe with mouse embryo fibroblasts

Fluorescence photomicrographs show that the hydrophobic fluorescent probe 1-anilinonaphthalene-8-sulfonate (ANS) binds to hydrophobic components of intact 3T3 cells. Cells exposed to ANS exhibit fluorescence in the cytoplasm, intense nuclear membrane fluorescence, and well-defined fluorescent nucleoli. Fluorescence titrations of 3T3 cells with ANS show a decrease in fluorescence intensity, a blue shift of native cell emission with increasing ANS concentration and the appearance of a new peak due to ANS fluorescence. These fluorescence effects are ascribed to energy transfer processes involving bound ANS and the tryptophan and tyrosine residues of cellular proteins. ANS bound to 3T3 cells appears to quench the long wavelength component of the cellular tryptophan fluorescence, resulting in an unmasking of tryptophan and tyrosine emission at shorter wavelengths.     

Application of ANS fluorescent probes to identify hydrophobic sites on the surface of DREAM

DREAM (calsenilin or KChIP-3) is a calcium sensor involved in regulation of diverse physiological processes by interactions with multiple intracellular partners including DNA, K_v4 channels, and presenilin, however the detailed mechanism of the recognition of the intracellular partners remains unclear. To identify the surface hydrophobic surfaces on apo and Ca^2 +DREAM as a possible interaction sites for target proteins and/or specific regulators of DREAM function the binding interactions of 1,8-ANS and 2,6-ANS with DREAM were characterized by fluorescence and docking studies. Emission intensity of ANS–DREAM complexes increases upon Ca^2 + association which is consistent with an overall decrease in surface polarity. The dissociation constants for ANS binding to apoDREAM and Ca^2 +DREAM were determined to be 195 ± 20 μM and 62 ± 4 μM, respectively. Fluorescence lifetime measurements indicate that two ANS molecules bind in two independent binding sites on DREAM monomer. One site is near the exiting helix of EF-4 and the second site is located in the hydrophobic crevice between EF-3 and EF-4. 1,8-ANS displacement studies using arachidonic acid demonstrate that the hydrophobic crevice between EF-3 and EF-4 serves as a binding site for fatty acids that modulate functional properties of K_v4 channel:KChIP complexes. Thus, the C-terminal hydrophobic crevice may be involved in DREAM interactions with small hydrophobic ligands as well as other intracellular proteins.     

Fatty acid transfer from intestinal fatty acid binding protein to membranes: electrostatic and hydrophobic interactions

Intestinal fatty acid binding protein (IFABP) is thought to participate in the intracellular transport of fatty acids (FAs). Fatty acid transfer from IFABP to phospholipid membranes is proposed to occur during protein-membrane collisional interactions. In this study, we analyzed the participation of electrostatic and hydrophobic interactions in the collisional mechanism of FA transfer from IFABP to membranes. Using a fluorescence resonance energy transfer assay, we examined the rate and mechanism of transfer of anthroyloxy-fatty acid analogs a) from IFABP to phospholipid membranes of different composition; b) from chemically modified IFABPs, in which the acetylation of surface lysine residues eliminated positive surface charges; and c) as a function of ionic strength. The results show clearly that negative charges on the membrane surface and positive charges on the protein surface are important for establishing the "collisional complex", during which fatty acid transfer occurs. In addition, changes in the hydrophobicity of the protein surface, as well as the hydrophobic volume of the acceptor vesicles, also influenced the rate of fatty acid transfer. Thus, ionic interactions between IFABP and membranes appear to play a primary role in the process of fatty acid transfer to membranes, and hydrophobic interactions can also modulate the rates of ligand transfer.     

ANS fluorescence. I. Effect of self-association on the spectral properties of the probe]

The dependence of spectral properties of Mg2+ and NH4+ salt of 8-anilino-1-naphthalenesulfonic acid (Mg-(ANS)2 and NH4-ANS, respectively) on the dye concentration and solvent composition was investigated by means of steady-state and time-resolved fluorescence spectroscopy. We have shown that the increase in ANS concentrations leads to changes in the shape of absorption and fluorescence spectra of the dye, accompanied by the decrease in its fluorescence decay time values. Such changes, observed in aqueous and organic solvents for both salts of ANS, reflect the existence of self-association of the dye molecules. The decrease in fluorescence intensity induced by self-association of the probe molecules is too small to explain a weak fluorescence of ANS in water. At the same time, it expounds the difference between the decay times of protein-embedded ANS molecules upon interaction of this probe with native and molten globule proteins.     

Uridine diphosphate galactose 4-epimerase: nucleotide and 8-anilino-1-naphthalenesulfonate binding properties of the substrate binding site.

Escherichia coli UDP-galactose 4-epimerase in its native form (epimerase.NAD) binds 8-anilino-1-naphthalenesulfonate (ANS) at one tight binding site per dimer with a dissociation constant of 25.9 +/- 2.1 micrometer at pH 8.5 and 27 degrees C. This appears to be the substrate binding site, as indicated by the fact that ANS is a kinetically competitive reversible inhibitor with a Ki of 27.5 micrometer and by the fact that ANS competes with UMP for binding to the enzyme. Upon binding at this site the fluorescence quantum yield of ANS is enhanced 185-fold, and its emission spectrum is blue shifted from a lambdamax of 515 to 470.nm, which suggests that the binding site is shielded from water and probably hydrophobic. Competitive binding experiments with nucleosides and nucleotides indicate that nucleotide binding at this site involves coupled hydrophobic and electrostatic interactions. The reduced form of the enzyme (epimerase.NADH) has no detectable binding affinity for ANS. The marked difference in the affinities of the native and reduced enzymes for ANS is interpreted to be a manifestation of a conformational difference between these enzyme forms.     

A thermodynamic characterization of the interaction of 8‐anilino‐1‐naphthalenesulfonic acid with native globular proteins: the effect of the ligand dimerization in the analysis of the binding isotherms

8‐Anilino‐1‐naphthalenesulfonic acid (ANS) is a popular fluorescence probe, broadly used for the analysis of proteins, but the nature of its interaction with proteins and the high increase in the fluorescence intensity that takes place upon such process are still unclear. In the last few years, isothermal titration calorimetry has been used to characterize the nature of the interaction of this dye with proteins. The analysis of the binding isotherms of these studies has not considered the dimerization equilibrium of ANS, which is pH dependent, and it can result in serious errors in the data analysis. In the present work we have developed a suitable data analysis by which this process is taken into account. To study the binding of the dye to proteins at different pH values, we have used the Abl‐SH3 domain. Our results suggest that at pH 3 and 5, where the dimerization of the ANS is important, electrostatic interactions are significant for the binding of ANS to the Abl‐SH3 domain. However, at pH 7, ANS behaves mostly as monomer and the interaction with the protein is mainly hydrophobic. The pH dependent behavior of the ANS binding to proteins can be explained in terms of ionization states of both, the protein and the ANS. Copyright © 2010 John Wiley & Sons, Ltd.     

Initial binding process of the membrane insertase YidC with its substrate Pf3 coat protein is reversible

The binding of the inner membrane insertase YidC from Escherichia coli to its substrate, the Pf3 coat protein, was examined in vitro by fluorescence spectroscopy. Purified YidC protein was solubilized with the lipid-like detergent n-dodecylphosphocholine and noncovalently labeled with 1-anilino-naphthalene-8-sulfonate (ANS), whereas the Pf3 coat protein was kept in solution by the addition of 10% (v/v) isopropanol to the buffer. The binding of Pf3 coat protein was analyzed by fluorescence quenching of ANS bound to YidC. All binding curves showed a strict hyperbolic form at pH values between 9.0 and 5.0, indicating a reversible and noncooperative binding between YidC and its substrate. Analysis of the data revealed a dissociation constant K D for the binding process in the range of 1 microM. The pH profile of the K D values suggests that the binding of the Pf3 coat protein is dominated by hydrophobic interactions. The titration experiments provide strong evidence for a conformational change of the insertase upon binding a Pf3 coat protein molecule.