New, potent P1/P2-morpholinone-based HIV-protease inhibitors

We have developed efficient synthesis of morpholinone-based cyclic mimetics of the P1/P2 portion of the HIV-1 protease inhibitor Amprenavir. This effort led to discovery of allyl- and spiro-cyclopropyl-P2-substituted inhibitors 17 and 31, both 500 times more potent than the parent inhibitor 1. These results support morpholinones as novel mimetics of the P1/P2 portion of Amprenavir and potentially of other HIV-protease inhibitors, and thus provide a novel medicinal chemistry template for optimization toward more potent and drug-like inhibitors.     

Cyclic sulfamide HIV-1 protease inhibitors, with sidechains spanning from P2/P2' to P1/P1'

Previous studies of HIV protease inhibitors have shown that it is possible to elongate the P1/P1' sidechains to reach the S3/S3' binding sites. By analogy, we expected that it would be possible to design inhibitors reaching between the S1/S1' and S2/S2' binding sites. Molecular modeling suggested that this could be achieved with appropriate ortho-substitution of the P2/P2' benzyl groups in our cyclic sulfamide inhibitors. Four different spacer groups were investigated. The compounds were smoothly prepared from tartaric acid in five steps and exhibit low to moderate activity, the most potent inhibitor possessing a Ki value of 0.53 microM.     

Potent and selective P2-P3 ketoamide inhibitors of cathepsin K with good pharmacokinetic properties via favorable P1', P1, and/or P3 substitutions

A series of ketoamides were synthesized and evaluated for inhibitory activity against cathepsin K. Exploration of the interactions between achiral P(2) substituents and the cysteine protease based on molecular modelling suggestions resulted in potent cathepsin K inhibitors that demonstrated high selectivity versus cathepsins B, H, and L. Subsequent modifications of the P(3), P(1), and P(1') moieties afforded orally bioavailable inhibitors.     

P1 and P3 optimization of novel bicycloproline P2 bearing tetrapeptidyl alpha-ketoamide based HCV protease inhibitors

With the aim of discovering potent and selective HCV protease inhibitors, we synthesized and evaluated a series of 1a based tetrapeptidyl ketoamides with additional modification(s) at P1', P1, and P3 positions. As a result of this effort, we found that replacement of the P3 valine with tert-leucine resulted in the discovery of a series of inhibitors (e.g., 3a, 3c, and 4c) endowed with improved enzyme and/or cellular activity relative to 1a. When dosed to F-344 rats orally at 50mg/kg, 3a achieved 2.5x higher liver and plasma exposure in comparison to that detected with 1a.     

A new structural theme in C2-symmetric HIV-1 protease inhibitors: ortho-substituted P1/P1' side chains

In this report, the rapid syntheses of 24 novel C2-symmetric HIV-1 protease inhibitors are described. Two ortho-iodobenzyloxy containing C-terminal duplicated inhibitors served as starting materials for microwave-enhanced palladium(0)-catalyzed carbon-carbon bond forming reactions (Suzuki, Sonogashira, Heck, and Negishi). Highly potent inhibitors equipped with ortho-functionalized P1/P1' side chains as the structural theme were identified. Computational efforts were applied to study the binding mode of this class of inhibitors and to establish structure-activity relationships. The overall orientation of the inhibitors in the active site was reproduced by docking which suggested three possible conformations of the P1/P1' groups of which two seem more plausible.     

Phe*-Ala-based pentapeptide mimetics are BACE inhibitors: P2 and P3 SAR

We describe herein the syntheses and evaluation of a series of C-termini pyridyl containing Phe*-Ala-based BACE inhibitors (5-19). In conjunction with four fixed residues at the P1 (Phe), P1' (Ala), P2' (Val), and P2' cap (Pyr.), rather detailed SAR modifications at P2 and P3 positions were pursued. The promising inhibitors emerging from this SAR investigation, 12 and 17 demonstrated very good enzyme potency (IC(50)=45 nM) and cellular activity (IC(50)=0.4 microM).     

Novel thrombin inhibitors incorporating weakly basic heterobicyclic P1-arginine mimetics: optimization via modification of P1 and P3 moieties

Optimization of lead compounds 1 and 2 resulted in novel, selective, and potent thrombin inhibitors incorporating weakly basic heterobicyclic P(1)-arginine mimetics. The design, synthesis, and biological activity of racemic thrombin inhibitors 17-29 and enantiomerically pure thrombin inhibitors 30-33 are described. The arginine side-chain mimetics used in this study are 4,5,6,7-tetrahydro-1,3-benzothiazol-2-amine, 4,5,6,7-tetrahydro-2H-indazole, and 2-imino-4,5,6,7-tetrahydro-1,3-benzothiazol-3(2H)-ylamine.     

Phosphorous acid analogs of novel P2–P4 macrocycles as inhibitors of HCV–NS3 protease

HCV–NS3 protease is essential for viral replication and NS3 protease inhibitors have shown proof of concept in clinical trials. Novel P2–P4 macrocycle inhibitors of NS3/4A comprising a P1 C-terminal carboxylic acid have recently been disclosed. A series of analogs, in which the carboxylic residue is replaced by phosphorous acid functionalities were synthesized and found to be inhibitors of the NS3 protease. Among them the methylphosphinate analogue showed nanomolar level of enzyme inhibition and sub-micromolar potency in the replication assay.     

P2-P1' macrocyclization of P2 phenylglycine based HCV NS3 protease inhibitors using ring-closing metathesis

Macrocyclization is a commonly used strategy to preorganize HCV NS3 protease inhibitors in their bioactive conformation. Moreover, macrocyclization generally leads to greater stability and improved pharmacokinetic properties. In HCV NS3 protease inhibitors, it has been shown to be beneficial to include a vinylated phenylglycine in the P2 position in combination with alkenylic P1' substituents. A series of 14-, 15- and 16-membered macrocyclic HCV NS3 protease inhibitors with the linker connecting the P2 phenylglycine and the alkenylic P1' were synthesized by ring-closing metathesis, using both microwave and conventional heating. Besides formation of the expected macrocycles in cis and trans configuration as major products, both ring-contracted and double-bond migrated isomers were obtained, in particular during formation of the smaller rings (14- and 15-membered rings). All inhibitors had K(i)-values in the nanomolar range, but only one inhibitor type was improved by rigidification. The loss in inhibitory effect can be attributed to a disruption of the beneficial π-π interaction between the P2 fragment and H57, which proved to be especially deleterious for the d-phenylglycine epimers.     

Novel factor Xa inhibitors based on a 2-carboxyindole scaffold: SAR of P4 substituents in combination with a neutral P1 ligand

A series of novel, highly potent 2-carboxyindole-based factor Xa inhibitors is described. Structural requirements for P4 ligands in combination with a neutral biaryl P1 ligand were investigated with the 2-carboxyindole scaffold. A diverse set of P4 substituents was identified, which, in conjunction with a biaryl P1 ligand, gave highly potent factor Xa inhibitors, which were also selective versus other proteases and efficacious in various antithrombotic secondary assays.     

Novel spirocyclic pyrrolidones as P2/P1 mimetics in potent inhibitors of HIV-1 protease

We have developed concise and efficient syntheses of novel spirocyclic pyrrolidones 1-3, which involve the alkylation of pyrrolidone precursor 13 with 1,5-dibromopentane, 16 and 15, followed by an in situ lactamization. Conjugates of 1 and 2 with P1'/P2' hydroxy-indanolamine moiety resulted in novel and potent inhibitors of HIV-1 protease 25 and 26, suggesting that 1 and 2 are novel P2/P1 HIV-PI mimetics.     

Novel BACE1 inhibitors possessing a 5-nitroisophthalic scaffold at the P2 position

Recently, we reported substrate-based pentapeptidic BACE1 inhibitors possessing a hydroxymethylcarbonyl isostere as a substrate transition-state mimic. These inhibitors showed potent inhibitory activities in enzymatic and cell assays. We also designed and synthesized non-peptidic and small-sized inhibitors possessing a heterocyclic scaffold at the P(2) position. By studying the structure-activity relationship of these inhibitors, we found that the σ-π interaction of an inhibitor with the BACE1-Arg235 side chain played a key role in the inhibition mechanism. Hence, we optimized the inhibitors with a focus on their P(2) regions. In this Letter, a series of novel BACE1 inhibitors possessing a 5-nitroisophthalic scaffold at the P(2) position are described along with the results of the related structure-activity relationship study. These small-sized inhibitors are expected improved membrane permeability and bioavailability.     

P3 cap modified Phe*-Ala series BACE inhibitors

With the aim of reducing molecular weight and adjusting log D value of BACE inhibitors to more favorable range for BBB penetration and better bioavailability, we synthesized and evaluated several series of P3 cap modified BACE inhibitors obtained via replacement of the P3NHBoc moiety as seen in 3 with other polar functional groups such as amino, hydroxyl and fluorine. Several promising inhibitors emerging from this P3 cap SAR study (e.g., 15 and 19) demonstrated good enzyme inhibitory potencies (BACE-1 IC(50) <50 nM) and whole cell activities (IC(50) approximately 1 microM).     

Increased antiviral activity of cyclic urea HIV protease inhibitors by modifying the P1/P1' substituents.

A series of alkyl substituted P1/P1' analogs was prepared in an attempt to increase translation of the 3-aminoindazole class of HIV protease inhibitors. Increasing the lipophilicity of the P1/P1' residues dramatically improved translation of enzyme activity to antiviral activity in the whole cell assay.     

Structure-guided design and synthesis of P1' position 1-phenylcycloalkylamine-derived pentapeptidic BACE1 inhibitors

Previously, we reported potent pentapeptidic BACE1 inhibitors with the hydroxymethylcarbonyl isostere as a substrate transition-state mimic. To improve the in vitro potency, we further reported pentapeptidic inhibitors with carboxylic acid bioisosteres at the P(4) and P1' positions. In the current study, we screened new P1' position 1-phenylcycloalkylamine analogs to find non-acidic inhibitors that possess double-digit nanomolar range IC(50) values. An extensive structure-activity relationship study was performed with various amine derivatives at the P1' position. The most potent inhibitor of this pentapeptide series, KMI-1830, possessing 1-phenylcyclopentylamine at the P1' position had an IC(50) value of 11.6 nM against BACE1 in vitro enzymatic assay.     

Design of P1' and P3' residues of trivalent thrombin inhibitors and their crystal structures

Synthetic bivalent thrombin inhibitors comprise an active site blocking segment, a fibrinogen recognition exosite blocking segment, and a linker connecting these segments. Possible nonpolar interactions of the P1' and P3' residues of the linker with thrombin S1' and S3' subsites, respectively, were identified using the "Methyl Scan" method [Slon-Usakiewicz et al. (1997) Biochemistry 36, 13494-13502]. A series of inhibitors (4-tert-butylbenzenesulfonyl)-Arg-(D-pipecolic acid)-Xaa-Gly-Yaa-Gly-betaAla-Asp-Tyr-Glu-Pro-Ile-Pro-Glu-Glu-Ala- (be ta-cyclohexylalanine)-(D-Glu)-OH, in which nonpolar P1' residue Xaa or P3' residue Yaa was incorporated, were designed and improved the affinity to thrombin. Substitution of the P3' residue with D-phenylglycine or D-Phe improved the K(i) value to (9.5 +/- 0.6) x 10(-14) or 1.3 +/- 0.5 x 10(-13) M, respectively, compared to that of a reference inhibitor with Gly residues at Xaa and Yaa residues (K(i) = (2.4 +/- 0.5) x 10(-11) M). Similarly, substitution of the P1' residue with L-norleucine or L-beta-(2-thienyl)alanine lowered the K(i) values to (8.2 +/- 0.6) x 10(-14) or (5.1 +/- 0.4) x 10(-14) M, respectively. The linker Gly-Gly-Gly-betaAla of the inhibitors in the previous sentence was simplified with 12-aminododecanoic acid, resulting in further improvement of the K(i) values to (3.8 +/- 0.6) x 10(-14) or (1.7 +/- 0.4) x 10(-14) M, respectively. These K(i) values are equivalent to that of natural hirudin (2.2 x 10(-14) M), yet the size of the synthetic inhibitors (2 kD) is only one-third that of hirudin (7 kD). Two inhibitors, with L-norleucine or L-beta-(2-thienyl)alanine at the P1' residue and the improved linker of 12-aminododecanoic acid, were crystallized in complex with human alpha-thrombin. The crystal structures of these complexes were solved and refined to 2.1 A resolution. The Lys(60F) side chain of thrombin moved significantly and formed a large nonpolar S1' subsite to accommodate the bulky P1' residue.     

P1, P2'-linked macrocyclic amine derivatives as matrix metalloproteinase inhibitors.

A novel series of 13- and 14-membered macrocyclic amines was developed by linking the P1 and P2' groups. The synthesis entails stereoselective Frater alkylation to install the anti-succinate configuration and macrocyclic amination via nucleophilic displacement. This strategy resulted in a new class of conformationally constrained inhibitors that are potent and selective for MMP-8 and 9 over MMP-1 and 3.     

Substituted acrylamides as factor Xa inhibitors: improving bioavailability by P1 modification

To overcome the low bioavailability of our substituted acrylamide P1 benzamidine factor Xa inhibitors reported previously, neutral and less basic groups were used to replace the benzamidine. As a result, a series of P1 aminoisoquinoline substituted acrylamide Xa inhibitors was identified to be potent, selective, and orally bioavailable. Modification of P4 moiety of these compounds further improved their pharmacokinetic properties.     

Symmetric fluoro-substituted diol-based HIV protease inhibitors. Ortho-fluorinated and meta-fluorinated P1/P1'-benzyloxy side groups significantly improve the antiviral activity and preserve binding efficacy.

HIV-1 protease is a pivotal enzyme in the later stages of the viral life cycle which is responsible for the processing and maturation of the virus particle into an infectious virion. As such, HIV-1 protease has become an important target for the treatment of AIDS, and efficient drugs have been developed. However, negative side effects and fast emerging resistance to the current drugs have necessitated the development of novel chemical entities in order to exploit different pharmacokinetic properties as well as new interaction patterns. We have used X-ray crystallography to decipher the structure-activity relationship of fluoro-substitution as a strategy to improve the antiviral activity and the protease inhibition of C2-symmetric diol-based inhibitors. In total we present six protease-inhibitor complexes at 1.8-2.3 A resolution, which have been structurally characterized with respect to their antiviral and inhibitory activities, in order to evaluate the effects of different fluoro-substitutions. These C2-symmetric inhibitors comprise mono- and difluoro-substituted benzyloxy side groups in P1/P1' and indanoleamine side groups in P2/P2'. The ortho- and meta-fluorinated P1/P1'-benzyloxy side groups proved to have the most cytopathogenic effects compared with the nonsubstituted analog and related C2-symmetric diol-based inhibitors. The different fluoro-substitutions are well accommodated in the protease S1/S1' subsites, as observed by an increase in favorable Van der Waals contacts and surface area buried by the inhibitors. These data will be used in the development of potent inhibitors with different pharmacokinetic profiles towards resistant protease mutants.