免疫亲和层析技术研究:间隔臂对配体偶联效率及固相抗体活性的影响

 本文研究了两种二胺类间隔臂EDA、IBPA在免疫亲和层析中的应用。结果表明,与无间隔臂的支持物(DST-支持物)比较,间隔臂的引入可大幅度降低固相抗体(单克隆和多克隆)活性的损失。这项工作可供免疫吸附剂的设计及固相配体性质的研究作为参考。     

Characterization and immobilization of liposome-bound cellulase for hydrolysis of insoluble cellulose

The liposome-bound cellulase was prepared by covalently coupling cellulase with the enzyme-free liposomes bearing aldehyde groups so that cellulase was located solely on the outer membrane of liposomes. The modified cellulase possessed the higher activity efficiency and lipid-based specific activity than the cellulase-containing liposomes reported previously. The enzyme-free liposomes bearing aldehyde groups were covalently immobilized with the chitosan gel beads and the free cellulase was coupled with the treated gel beads to prepare the immobilized liposome-bound cellulase. The activity efficiency of the immobilized liposome-bound cellulase was much higher than that of the conventionally immobilized cellulase. The results on reusability of the immobilized liposome-bound cellulase in the hydrolysis of either soluble or insoluble cellulose showed that the immobilized liposome-bound cellulase had the higher remaining cellulase activity and reusability than the conventionally immobilized cellulase for the hydrolysis of either type of cellulose. The liposomal membrane was suggested to be efficient in maintaining the cellulase activity during the hydrolysis.     

Affinity electrophoresis: New simple and general methods of preparation of affinity gels

Two simple and generally applicable methods of preparation of affinity gels for affinity electrophoresis in agarose and polyacrylamide gels are described. In the first method, amino ligands are coupled to periodate-oxidized agarose gel beads (Sepharose 4B), and homogeneous affinity gels are obtained after mixing the melted substituted beads with either melted agarose solution or with the polymerization mixture used for the preparation of polyacrylamide gels. This type of affinity gel was used for affinity electrophoresis of lectins (immobilized p-aminophenyl glycosides), ribonuclease (immobilized uridine 3′,5′-diphosphate 5′-p-aminophenyl ester), trypsin (immobilized p-aminobenzamidine), and double-stranded phage DNA fragments (immobilized acriflavine). Alternatively, heterogeneous affinity gels are prepared from the suspension of ligand-substituted agarose, dextran, or polyacrylamide gel beads in the polymerization solution normally used for preparation of polyacrylamide electrophoretic gels. This technique was used for affinity electrophoresis of lectins, ribonuclease, and trypsin on affinity gels containing appropriate ligands coupled to the gel beads “activated” by various methods. Applicability of affinity gels prepared by the two methods described above for affinity isoelectric focusing is demonstrated.     

Immobilization of cellulase through its carbohydrate side chains — A rationale for its recovery and reuse

The major types of components of cellulase [see 1,4-(1, 3;1,4)-β-d-glucan 4-glucanohydrolase, EC 3.2.1.4] have been adsorbed onto concanavalin A immobilized on Sepharose 4B, suggesting that they are glycoproteins. These components were covalently coupled to cyanogen bromide-activated Sepharose after aminoalkylation of their periodate-oxidized carbohydrate side chains to provide additional points of attachment of the enzyme to the support. Although there was only a 9% recovery of starting avicelase activity, the immobilized enzyme catalysed the hydrolysis of insoluble cellulose to glucose with greater efficiency than did free cellulase.     

Covalent immobilization of cyclodextrin glucosyltransferase (CGTase) in activated silica and Sepharose

Cyclodextrin glucanotransferase is a non-Leloir glycosyltransferase that directly employs the free energy of cleavage of starch to produce cyclodextrins. In presence of appropriate acceptors, this enzyme synthesizes oligosaccharides containing alpha(1-->4) bonds. We have investigated the covalent immobilization of CGTase onto different activated supports. Silica was aminated and further activated with glutaraldehyde. The maximum amount of bound protein was about 4 mg CGTase per gram of support; however, the catalytic efficiency of the immobilized enzyme was lower than 6%. Sepharose 4B activated with cyanogen bromide (CNBr-activated Sepharose) and Sepharose 4B with a spacer arm of 1,6-diaminohexane (EAH Sepharose) were also assayed. These gels react with the amino and carboxylic groups of CGTase, respectively. With CNBr-activated Sepharose, a low percentage of enzyme was bound to the support but with a significant catalytic efficiency (29%). A higher recovery of protein was obtained with EAH Sepharose (62%), but only 2.4% of the initial activity was present in the immobilized biocatalyst. The results were discussed in terms of CGTase structure and mechanism. In addition, the solvent accessibility of amino or carboxylic groups, calculated using the NACCESS software, was considered.     

An affinity gel for the inhibition, binding, and isolation of serine proteases

A preparation procedure for gels for the specific binding and inhibition of serine proteases is described. Phosphoryl trifluoride was synthesized and reacted with two different types of agarose gels, a crosslinked agarose (Sepharose CL-4B) and an agarose containing spacer arms with terminal vicinal-diol groups (a hydrolyzed epoxy-activated Sepharose 6B). The phosphoryl difluoride groups coupled to the gels were, in both cases, further modified by treatment with isopropanol to obtain isopropyl fluorophosphate groups covalently bound to the matrix. It was found that both modified gels absorbed and inhibited plasmin, but that the modified gel with spacer arms was markedly more efficient.     

Immobilized hemin affinity chromatography as a probe for proteins having potentiality to bind with heme

After Sepharose 4B polymer beads were activated by using epichlorohydrin, hemin was binded with them to prepare an immobilized hemin affinity chromatography column. The coupling rate of this column was very high, more than 0.25mg hemin could be fixed by 1g of wet Sepharose 4B beads. The column equilibrated with deionized water and eluated with pH 3.0 NaAc-HAc buffer was applied to capture the proteins in human serum, earthworm body and Bacillus subtilis cells. Three polypeptides in human serum were captured, one of which was verified as serum albumin after comparison to the control. At least one polypeptide in earthworm body, two in Bacillus subtilis cells displayed the powerful binding specificity to hemin. Our experiments demonstrated that the immobilized hemin affinity chromatography was available as a probe for some proteins having potentiality to bind with heme.     

Preparation and characterization of an enzymatically active immobilized derivative of myosin.

Purified skeletal muscle myosin (EC 3.6.1.3) has been covalently bound to Sepharose 4B by the cyanogen bromide procedure. The resulting complex, Sepharose-Myosin, possesses adenosine triphosphatase activity and is relatively stable for long periods of time. Under optimal binding conditions, approximately 33% of the specific ATPase activity of the bound myosin is retained. Polyacrylamide gel electrophoresis of polypeptides released from denatured Sepharose-Myosin indicates that 85% of the myosin is attached to the agarose beads through the heavy chains and the remainder through the light chains, in agreement with predictions of binding and release based upon either the lysine contents or molecular weights of themyosin subunits. The adenosine triphosphatase of the immobilized myosin has been investigated under conditions of varying pH, ionic strength, and cation concentration. The ATPase profiles of immobilized myosin are quite similar to those for free myosin, however subtle differences are found. The Sepharose-Myosin ATPase is not as sensitive as myosin to alterations in salt concentration and the apparent KM is approximately two-fold higher than that of myosin. These differences are probably due to chemical modification in the region of the attachment site(s) to the agarose beads and hydration and diffusion limitations imposed by the polymeric agarose matrix.     

Immobilization of proteins on oxidized crosslinked Sepharose preparations by reductive amination

Mild periodate oxidation of certain commercially available crosslinked agarose beads (Sepharose CL-4B and CL-6B) results in the generation of aldehydo groups which were useful for immobilization of amino compounds by reductive amination using pyridine borane. Consumption of periodate ion and production of formaldehyde were only observed with crosslinked Sepharose preparations and were correlated with a binding capacity much greater than that of uncross-linked gels when subjected to the reductive amination reaction. Up to 50 mg (approximately 0.73 mumol) of bovine serum albumin and 30 mumol of glycylglycine were coupled per gram of moist oxidized Sepharose CL-6B. The immobilization reaction was shown to proceed at neutral pH requiring about 12 h for completion and to be relatively insensitive to temperature and pyridine borane concentration. The oxidized gel was shown to be stable for at least 2 months upon storage in 0.1 M acetic acid. This method has proven to be useful for the preparation of a variety of affinity matrices and immobilized enzymes.     

Iron-dependent binding of bovine milk α-casein with holo-lactoferrin, but not holo-transferrin

Bovine milk α-casein has been identified as an iron- and heme-binding protein. However, the physiological role of its iron-binding remains to be elucidated in more detail. α-Casein was immobilized on CNBr-activated Sepharose 4B beads, and the α-casein agarose beads efficiently bound hemin as well as ferrous ammonium sulfate (Fe(2+)) as compared with control beads. Additionally, α-casein-beads bound bovine holo-lactoferrin (Lf), but not holo-transferrin. Lf caused the release of Fe(2+) which had bound to the α-casein-agarose beads beforehand. These results suggest that bovine α-casein iron-dependently binds holo-bovine Lf more strongly than Fe(2+), and that strong binding between them may play a physiological role in regulating iron homeostasis in the bovine mammary gland.     

Immobilization of γ-glutamyl transpeptidase,a membrane enzyme,in gel beads via liposome entrapment

Bovine kidney γ-glutamyl transpeptidase, a membrane enzyme, was immobilized in gel beads by application of the method of Wallstén et al. (Biochim. Biophys. Acta, 982, 47–52, 1989). The gel beads were equilibrated with a dispersion of the enzyme, phospholipids, and cholate and subsequently dialyzed against a buffer for reconstitution and immobilization of enzyme-bound liposomes in the pores of the beads. From the standpoints of the immobilized contents of protein and phospholipids and of the reactivity of γ-glutamyl transpeptidase, a dialysis buffer of Tris-HCl (pH 7.5), a phospholipid concentration of 45 mg/ml in the enzyme-phospholipid-cholate dispersion, and the use of Sepharose CL-6B as the support gel were found to be most appropriate for the immobilization of γ-glutamyl transpeptidase, γ-Glutamyl transpeptidase was activated and stabilized by reconstitution in liposomes. In operation with a packed bed reactor, liposome-bound γ-glutamyl transpeptidase immobilized in Sepharose CL-6B exhibited relatively stable and constant activity for 12 h. In addition, it was found that enzyme substrates were able to pass through the pores of the gel beads to interact with the enzyme present on the outer surface of the liposome membrane in the gel beads. These results thus indicated that a novel support made up of liposomes and Sepharose CL-6B would permit efficient immobilization of lipid-requiring and/or membrane enzymes.     

Periodical batch culture of the immobilized growing fungi Sporotrichum cellulophilum producing cellulase in the nonwoven materials

The thermophilic fungus Sporotrichum cellulophilum was immobilized with nonwoven materials for cellulase production. The cellulose powder concentration in the medium was an important factor controlling cellulase production. When the cellulose powder concentration in the nonwoven materials was more than 4%, cellulase production was suppressed. The growth of the immobilized fungi depended on the spaces in the nonwoven materials. Immobilized growing fungi were retained by the non-woven materials, and the supernatant medium did not contain mycelia. The heat stability of the immobilized growing fungus was higher than that of the free fungus. The immobilized fungus gave the same FPA as the free mycelium, but the lag time for cellulase production in the immobilized fungus was longer. It was necessary for the only medium to be changed in order to get the immobilized growing fungus to continue producing cellulase. In this instance there was no difference of lag time in comparison with the free cells, and the supply of cellulose powder and polypepton was reduced to two-thirds. After 23 exchanges of the medium (2.6 mg cellulose powder/1 cm(3) nonwoven materials) FPA value was maintained. The periodic batch culture was continued for 69 days.     

Immobilization of cellulase and d-xylanase complexes from Aspergillus terreus F-413 on controlled porosity glasses

The major components of cellulase [see 1,4-(1,3;1,4)-β-d-glucan 4-glucanohydrolase, EC 3.2.1.4] and d-xylanase (see 1,4-β-d-xylan xylanohydrolase, EC 3.2.1.8) complexes have been immobilized on glass beads activated by 3-aminopropyltriethoxysilane or 3-glycidoxypropyltrimethoxysilane. The final preparations contained over 20 mg protein g^?1 glass beads. The activity retained was 71.6–98.1% for cellulase complexes and 81–100% for d-xylanase complexes. The immobilization of the enzymes spread their optimum pH range. Cellulose and d-xylan were quantitatively hydrolysed by the immobilized enzymes. The major reaction products were identified as a d-glucose and d-xylose respectively.     

Evaluation of CNBr, FMP and hydrazide resins for immunoaffinity purification of factor IX.

The American Red Cross has developed an immunoaffinity chromatography method to purify human coagulation Factor IX to high levels of purity for therapeutic treatment of hemophilia B. The resin currently used in this process is Sepharose CL2B, a cross-linked 2% agarose, which is activated with cyanogen bromide to immobilize an anti-Factor IX monoclonal antibody. This study evaluated two alternative resins and coupling chemistries, a synthetic polymer bead activated by 2-fluoro-1-methyl-pyridinium toluene 4-sulfonate (FMP) and a cross-linked 2% agarose bead with free hydrazide groups for site-specific coupling. The cyanogen bromide and FMP chemistries immobilize the monoclonal antibody in a random orientation. In hydrazide coupling, the monoclonal antibody is immobilized by the non-antigen-binding part of the molecule which, theoretically, should increase the amount of immobilized monoclonal antibody able to bind antigen. To examine this, the capacity of the resins to bind Factor IX and the purity and recovery of Factor IX eluted from the resins were measured. The FMP-activated resin exhibited the lowest capacity, binding only 2% of the Factor IX feed. Sepharose CL2B bound 87% of the loaded protein, while the hydrazide resin bound 43%. These results suggest that (a) hydrazide activation may be insufficient to orient monoclonal antibody and (b) other factors such as steric hindrances and diffusional resistances during immobilization may be important. Neither of the other resins tested demonstrated improved performance compared with cyanogen bromide-activated Sepharose CL2B for the immunoaffinity purification of Factor IX.     

Isolation and partial characterization of ribonuclease inhibitor from goat liver

Ribonuclease inhibitor (RI), a 50 kDa protein, has been found both in mammalian and nonmammalian tissues. We have isolated RI from goat liver and partial characterization has been accomplished. For the isolation of RI, DEAE cellulose column chromatography followed by affinity chromatography using CNBr activated Sepharose 4B was performed. The inhibition of ribonucleolytic activity of Ribonuclease A has been checked by an agarose gel based assay. The antiangiogenic property of the protein was tested by the chorioallantoic membrane (CAM) assay. Results indicate inhibition of angiogenesis.     

Sepharose 4B as a matrix for affinity chromatography. A spin-labelling investigation using nitroxides as model ligands

Nitroxide spin labels were attached to CNBr-activated Sepharose 4B directly and through oligoglycines and oo-amino-carboxylic acids of varying length. The homogeneity of the carbohydrate environments of directly attached labels was investigated by measuring dipolar interactions between nitroxides as a function of solvation and of spin dilution with a diamagnetic analogue, as well as by electron exchange between the nitroxides and paramagnetic metal ions in solution. Only the exchange experiment revealed any inhomogeneity, suggesting that a small proportion of sites may be less accessible than the majority. The distances between sites were sufficiently small to allow, in principle, multiple-site interactions between quite small proteins in solution and immobilized ligands. Reorientation of the label at the matrix, characterized by the correlation time t, became more rapid with increasing spacer length n. For n > 12, the decrease in t was less pronounced. The two types of spacer behaved similarly. Thus an ideal spacer length for affinity separations is 12 atoms; this is in good agreement with data from a variety of affinity separations. The results of electron spin resonance studies of the effect of non-aqueous solvent on directly and indirectly labelled Sepharose 4B were used to suggest reasons why enzymes immobilized on Sepharose may be stabilized to denaturing solvents.     

Peptide synthesis in aqueous-organic solvent mixtures with alpha-chymotrypsin immobilized to tresyl chloride-activated agarose

alpha-Chymotrypsin was immobilized with a high coupling yield (up to 80%) to tresyl chloride activated Sepharose CL-4B.The immobilized enzyme was tested for its ability to synthesize soluble peptides from N-acetylated amino acid esters as acyl donors and amino acid amides as acceptor amines in water-water-miscible organic solvent mixtures. It was found that the yield of peptide increased with increasing concentration of organic cosolvent. Almost complete synthesis (97%) of Ac-Phe-Ala-NH(2) was obtained from Ac-Phe-OMe using a sixfold excess of Ala-NH(2). The rate of peptide formation in aqueous-organic solvent mixtures was good. Thus, 0.1M peptide was formed in less than 2 h in 50 vol% DMF with 0.1 mg immobilized chymotrypsin/mL reaction mixture. The immobilized enzyme distinguished between the L and D configurations of acceptor amino acid amides even in high concentration of nonaqueous component (90% 1,4-butanediol). The effect of temperature was studied. It was found that both the yield of peptide and the stability of immobilized enzyme increased when the temperature was lowered. Experiments could be performed at subzero temperatures in the aqueous-organic solvent mixtures resulting in very high yield of peptide. After three weeks continuous operation at 4 degrees C in 50% DMF, the immobilized enzyme retained 66%of its original synthetic activity. The activity of the immobilized enzyme was better conserved with a preparation made from agarose with a higher tresyl group content compared to a preparation made from a lower activated agarose, indicating that multiple point of attachment has a favorable effect on the stability of the enzyme in aqueous-organic solvent mixtures. The major advantage of using water-miscible instead of water-immiscible organic solvents to promote peptide syntheses appears to be the increased solubility of substrates and products, making continuous operation possible.     

Stability of nicotinamide adenine dinucleotide immobilized to cyanogen bromide activated agarose

The stability of NAD(H) immobilized to a crosslinked agarose support (Sepharose(R)-4B) was examined in buffer solutions at a pH of 7.0 and 8.5. Specifically, this study investigated particle attrition and ligand leakage rates from a cyanogen bromide activated agarose support. Particle attrition did not occur under the experimental conditions. Ligand leakage rates were found to be first order in immobilized ligand concentration with two labile populations of ligand. The two-population model is consistent with the cyanogen bromide coupling chemistry, which results in both an isourea and imidocarbonate ligand linkage. The rate of ligand leakage was found to occur over a time scale of days, with first order rate constants ranging from 0.007 to 0.15 d(-1), depending on solution pH. (c) 1997 John Wiley & Sons, Inc.     

Production of cellulase by immobilized whole cells of Haloarcula

Halophilic Archaea are adapted to a life in the extreme conditions and some of them are capable of growth on cellulosic waste as carbon and energy source by producing cellulase enzyme. The production of cellulase using free and immobilized cells of halophilic archaeal strain Haloarcula 2TK2 isolated from Tuzkoy Salt Mine and capable of producing cellulose was studied. The cells were cultured in a liquid medium containing 2.5 M NaCl to obtain the maximum cellulase activity and immobilized on agarose or polyacrylamide or alginate. Optimal salt dependence of free and immobilized cells of Haloarcula 2TK2 was established and the effects of pH and temperature were investigated. Immobilization to Na-alginate enhanced the enzymatic activity of the Haloarchaeal cells when compared to free cells and other polymeric supports. From the results obtained it is reasonable to infer that decomposition of plant polymers into simpler end products does occur at high salinities and cellulase producing haloarchael cells may be potentially utilized for the treatment of hypersaline waste water to remove cellulose.     

Immobilization and characterization of cellulase on concanavalin A (Con A)-layered calcium alginate beads

Cellulase has been immobilized on hybrid concanavalin A (Con A)-layered calcium alginate–starch beads. Immobilized cellulase retained about 82% of its activity. Con A was extracted from jack bean and the obtained crude protein was characterized by sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis. The immobilized beads showed high mechanical and storage stability; immobilized cellulase retained 100% and 85% activity at 4°C and 30°C, respectively, over one month. The immobilized cellulase retained about 70% of its activity after five cycles of use. The immobilized cellulase retained 70% activity after 120-min exposure to 60°C, whereas the soluble form only retained about 20%, showing that immobilization improved thermal stability. Surface morphology and elemental analysis of immobilized cellulase were examined using scanning electron microscope equipped with energy-dispersive X-ray. Based on the enzyme stability and reuse, this method of immobilization is both convenient and cheap.