Plastoquinol as a singlet oxygen scavenger in photosystem II

It has been found that in Chlamydomonas reinhardtii cells, under high-light stress, the level of reduced plastoquinone considerably increases while in the presence of pyrazolate, an inhibitor of plastoquinone and tocopherol biosynthesis, the content of reduced plastoquinone quickly decreases, similarly to α-tocopherol. In relation to chlorophyll, after 18 h of growth under low light with the inhibitor, the content of α-tocopherol was 22.2 mol/1000 mol chlorophyll and that of total plastoquinone (oxidized and reduced) was 19 mol/1000 mol chlorophyll, while after 2 h of high-light stress the corresponding amounts dropped to 6.4 and 6.2 mol/1000 mol chlorophyll for α-tocopherol and total plastoquinone, respectively. The degradation of both prenyllipids was partially reversed by diphenylamine, a singlet oxygen scavenger. It was concluded that plastoquinol, as well as α-tocopherol is decomposed under high-light stress as a result of a scavenging reaction of singlet oxygen generated in photosystem II. The levels of both α-tocopherol and of the reduced plastoquinone are not affected significantly in the absence of the inhibitor due to a high turnover rate of both prenyllipids, i.e., their degradation is compensated by fast biosynthesis. The calculated turnover rates under high-light conditions were twofold higher for total plastoquinone (0.23 nmol/h/ml of cell culture) than for α-tocopherol (0.11 nmol/h/ml). We have also found that the level of α-tocopherolquinone, an oxidation product of α-tocopherol, increases as the α-tocopherol is consumed. The same correlation was also observed for γ-tocopherol and its quinone form. Moreover, in the presence of pyrazolate under low-light growth conditions, the synthesis of plastoquinone-C, a hydroxylated plastoquinone derivative, was stimulated in contrast to plastoquinone, indicating for the first time a functional role for plastoquinone-C. The presented data also suggest that the two plastoquinones may have different biosynthetic pathways in C. reinhardtii.     

Feasibility study of exponential feeding strategy in fed-batch cultures for phenol degradation using Cupriavidus taiwanensis

An indigenous phenol-degrading bacterial isolate Cupriavidus taiwanensis R186 was used to degrade phenol from an aqueous solution under fed-batch operation. An exponential feeding strategy combined with dissolved oxygen control was applied based on kinetic characteristics of cell growth and phenol degradation to meet sufficient metabolic needs for cellular growth and achieve the best phenol removal efficiency. Without the stress of phenol inhibition, the optimal set point of specific growth rate of exponential feeding for fed-batch phenol degradation was found to be 0.50–0.55μ_max (μ_max denotes the maximum specific growth rate from Monod model). Meanwhile, the sufficient set point of dissolved oxygen for maximal phenol degradation efficiency was approximately at 10–55% air saturation. With the optimal operation conditions, the best phenol degradation rate was 0.213 g phenol h⁻¹, while a shortest treatment time of 15 h was achieved for complete degradation of 11.35 mM (ca. 3.20 g) of phenol.     

Detection of sensitive soil properties related to non-point phosphorus pollution by integrated models of SEDD and PLOAD

Effectively identifying soil properties in relation to non-point source (NPS) phosphorus pollution is important for NPS pollution management. Previous studies have focused on particulate P loads in relation to agricultural non-point source pollution. In areas undergoing rapid urbanization, dissolved P loads may be important with respect to conditions of surface infiltration and rainfall runoff. The present study developed an integrated model for the analysis of both dissolved P and particulate P loads, applied to the Meiliang Bay watershed, Taihu Lake, China. The results showed that NPS P loads up to 15 kg/km² were present, with particulate P loads up to 13 kg/km². The highest loads were concentrated in the southeastern region of the watershed. Although particle P was the main contributor to NPS P loads state, the contribution of dissolved P was significant, especially in sub-basins with significant amount of artificial land cover. The integration of dissolved P and particulate P loads provided more accurate evaluation of NPS P pollution. NPS P loads were found to correspond to specific soil properties. Soil organic matter and total nitrogen were shown to influence dissolved P loads, while total phosphorus and soil particle composition proportion were more closely related to particulate P loads.     

Commensal and pathogenic biofilms differently modulate peri‐implant oral mucosa in an organotypic model

The impact of oral commensal and pathogenic bacteria on peri‐implant mucosa is not well understood, despite the high prevalence of peri‐implant infections. Hence, we investigated responses of the peri‐implant mucosa to Streptococcus oralis or Aggregatibacter actinomycetemcomitans biofilms using a novel in vitro peri‐implant mucosa‐biofilm model. Our 3D model combined three components, organotypic oral mucosa, implant material, and oral biofilm, with structural assembly close to native situation. S. oralis induced a protective stress response in the peri‐implant mucosa through upregulation of heat shock protein (HSP70) genes. Attenuated inflammatory response was indicated by reduced cytokine levels of interleukin‐6 (IL‐6), interleukin‐8 (CXCL8), and monocyte chemoattractant protein‐1 (CCL2). The inflammatory balance was preserved through increased levels of tumor necrosis factor‐alpha (TNF‐α). A. actinomycetemcomitans induced downregulation of genes important for cell survival and host inflammatory response. The reduced cytokine levels of chemokine ligand 1 (CXCL1), CXCL8, and CCL2 also indicated a diminished inflammatory response. The induced immune balance by S. oralis may support oral health, whereas the reduced inflammatory response to A. actinomycetemcomitans may provide colonisation advantage and facilitate later tissue invasion. The comprehensive characterisation of peri‐implant mucosa‐biofilm interactions using our 3D model can provide new knowledge to improve strategies for prevention and therapy of peri‐implant disease.     

Substrate and product inhibition kinetics in succinic acid production by Actinobacillus succinogenes

The inhibition of substrate and products on the growth of Actinobacillus succinogenes in fermentation using glucose as the major carbon source was studied. A. succinogenes tolerated up to 143 g/L glucose and cell growth was completely inhibited with glucose concentration over 158 g/L. Significant decrease in succinic acid yield and prolonged lag phase were observed with glucose concentration above 100 g/L. Among the end-products investigated, formate was found to have the most inhibitory effect on succinic acid fermentation. The critical concentrations of acetate, ethanol, formate, pyruvate and succinate were 46, 42, 16, 74, 104 g/L, respectively. A growth kinetic model considering both substrate and product inhibition is proposed, which adequately simulates batch fermentation kinetics using both semi-defined and wheat-derived media. The model accurately describes the inhibitory kinetics caused by both externally added chemicals and the same chemicals produced during fermentation. This paper provides key insights into the improvement of succinic acid production and the modelling of inhibition kinetics.     

Production of polysaccharides from Ganoderma lucidum (CCRC 36041) under limitations of nutrients

This research studied the production of polysaccharides from Ganoderma lucidum under the various limitations of nutrients, including carbon-source, nitrogen-source, phosphate-source, magnesium-source, and dissolved oxygen. The different responses of polysaccharide production were observed under different limitations of nutrients. The concentration of polysaccharides was from 1.79 g/L decreasing to 0.91 g/L when the concentration of glucose was from 60 g/L decreasing to 20 g/L. The highest specific polysaccharide production was found at 60 g/L glucose media with 0.299 g/g-cell, and the lowest molecular weight was found in carbon-source limitation. Under nitrogen-source limitation the concentration of cells was low, but both polysaccharide production (1.61 g/L) and specific polysaccharide production (0.492 g/g-cell) were the highest. The lowest molecular weight of polysaccharides was found under nitrogen-source limitation. Both the phosphate-source and magnesium-source limitations showed low cell growth. With the phosphate-source limitation both low polysaccharide production and a lower molecular weight of polysaccharides was found. In the magnesium-source limitation low polysaccharide production, but a higher molecular weight of polysaccharides, was found. For the factor of oxygen supply the best polysaccharide production was found with sufficient oxygen for the first 5 days’ cultivation and then, after changing to oxygen limitation for another 5 days’ cultivation. On the other hand, the highest molecular weight of polysaccharides was found from the beginning with oxygen limitation throughout the process of fermentation.     

Influence of oxygen concentration on the metabolism of Penicillium chrysogenum

In large-scale bioreactors, there is often insufficient mixing and as a consequence, cells experience uneven substrate and oxygen levels that influence product formation. In this study, the influence of dissolved oxygen (DO) gradients on the primary and secondary metabolism of a high producing industrial strain of Penicillium chrysogenum was investigated. Within a wide range of DO concentrations, obtained under chemostat conditions, we observed different responses from P. chrysogenum: (i) no influence on growth or penicillin production (>0.025 mmol L⁻¹); (ii) reduced penicillin production, but no growth limitation (0.013–0.025 mmol L⁻¹); and (iii) growth and penicillin production limitations (<0.013 mmol L⁻¹). In addition, scale down experiments were performed by oscillating the DO concentration in the bioreactor. We found that during DO oscillation, the penicillin production rate decreased below the value observed when a constant DO equal to the average oscillating DO value was used. To understand and predict the influence of oxygen levels on primary metabolism and penicillin production, we developed a black box model that was linked to a detailed kinetic model of the penicillin pathway. The model simulations represented the experimental data during the step experiments; however, during the oscillation experiments the predictions deviated, indicating the involvement of the central metabolism in penicillin production.     

Influence of oxygen and temperature on growth and metabolic performance of Paralichthys lethostigma (Pleuronectiformes: Paralichthyidae)

In this study, we apply Fry's classification of environmental factors to demonstrate the limiting effects of oxygen and its interaction with temperature on the growth of juvenile P. lethostigma. We also evaluated the properties of two metabolic indices, marginal metabolic scope (MMS) and limiting oxygen concentration (LOC), as indicators of metabolic scope. We found that oxygen limitation has its greatest impact near the optimum temperature for growth of the species. At 29 °C a reduction from 6.00 mg/L to 4.00 mg/L caused a 50% reduction in growth rate while at 27 °C the reduction had no significant effect on growth rate. The results are particularly relevant because these temperatures and oxygen concentrations are commonly observed in nursery areas during summer months. At all temperatures fish from the lowest oxygen treatment (1.75 mg/L) had negative growth rates. Comparisons between daily oscillating oxygen treatments and constant treatments failed to demonstrate significant effects. At temperatures past the optimum, growth rates between the 6.00 mg/L and 4.00 mg/L treatments were not statistically different. LOC was significantly affected by temperature, oxygen, and their interaction. Estimates were positively correlated with oxygen treatment (R² > 0.71) and negatively correlated with temperature at moderate and low oxygen concentrations (R² > − 0.84). MMS was significantly affected by temperature and oxygen and was significantly correlated with oxygen treatment (R² > − 0.91), but correlations with temperature were not as clear. In conclusion, oxygen and temperature interactions have significant effects on metabolic scope and growth rates of fish, well above the accepted hypoxia threshold of 2.00 mg/L and MMS has proved a useful estimator of the metabolic scope of the organism within an environment.     

Cells,growth factors and bioactive surface properties in a mechanobiological model of implant healing

Interface conditions are of prime importance for implant fixation in the early post-operative period and modelling of specific biochemical interactions at implant surface is still missing. We hypothesized that updating osteoblast adhesion properties and growth factor source in an active zone located at the implant surface was relevant to model biochemical interactions of implant with its environment. We proposed an innovative set of diffusive–convective–reactive equations which relevant parameters were the cell decay factor, the cell motility and the growth factor balance.Initial comparison with histomorphometic results from a stable PMMA canine implant model provided an encouraging base to implement a numerical sensitivity analysis to evaluate the role of three types of bioactive surfaces: acid-etched titanium, coarse grit-blasted acid-etched titanium and coarse grit-blasted acid-etched titanium with RGDS peptide. We found that cell diffusion decrease (acid-etched+RGDS peptide vs. PMMA), and increase of local growth factor fraction (PMMA vs. acid-etched+RGDS peptide), significantly improved the amount of mineralized tissue on the implant surface. When the variation of structural fraction to cell motility and growth factor synthesis was investigated, an envelope pattern with an optimum was obtained but this could be exceeded for strong surface modifications and/or for high growth factor concentrations. The model also confirmed that implant bioactive properties should play a limited role to reduce heterogeneity of new-formed tissue. In conclusion, we suggested that our innovative theoretical approach was relevant to investigate implant fixation and could potentially help in reduction of implant revision.     

Melatonin protects ADSCs from ROS and enhances their therapeutic potency in a rat model of myocardial infarction

Myocardial infarction (MI) is a major cause of death and disability worldwide. In the last decade, mesenchymal stem cells (MSCs) based cell therapy has emerged as a promising therapeutic strategy. Although great advance have been made using MSCs to treat MI, the low viability of transplanted MSCs severely limits the efficiency of MSCs therapy. Here, we show evidence that ex vivo pre‐treatment with melatonin, an endogenous hormone with newly found anti‐oxidative activity, could improve survival and function of adipose tissue derived MSCs (ADSCs) in vitro as well as in vivo. ADSCs with 5 μM melatonin pre‐treatment for 24 hrs showed increased expression of the antioxidant enzyme catalase and Cu/Zn superoxide dismutase (SOD‐1), as well as pro‐angiogenic and mitogenic factors like insulin‐like growth factor 1, basic fibroblast growth factor, hepatocyte growth factor (HGF), epidermal growth factor. Furthermore, melatonin pre‐treatment protected MSCs from reactive oxygen species (ROS) induced apoptosis both directly by promoting anti‐apoptosis kinases like p‐Akt as well as blocking caspase cascade, and indirectly by restoring the ROS impaired cell adhesion. Using a rat model of MI, we found that melatonin pre‐treatment enhanced the viability of engrafted ADSCs, and promoted their therapeutic potency. Hopefully, our results may shed light on the design of more effective therapeutic strategies treating MI by MSCs in clinic.     

Rituximab sensitizes a Burkitt lymphoma cell line to cell killing by X-irradiation

Clinical trials with rituximab in combination with chemotherapeutic regimens have shown promising results. Data on the effects of rituximab treatment in combination with irradiation are, however, limited and inconsistent. This study aims to investigate the effects of rituximab (R) on cell death induced by X-irradiation in Raji lymphoma cells and to evaluate its mechanisms. We found the cell growth inhibition by irradiation was enhanced by additional rituximab exposure both in cells precultured with rituximab followed by irradiation (R + irradiation) or in cells treated in the reverse sequence (irradiation + R). R + irradiation combination treatment induced more apoptotic cells than irradiation and irradiation + R treatment as early as 12 h after treatment. At 24 h, both combination treatments, R + irradiation and irradiation + R, showed apoptotic cells, which were significantly different from irradiation alone. G2/M cell cycle arrest was observed after irradiation alone and the combination treatment. The combination treatment revealed an elevation in reactive oxygen species (ROS) generation in a radiation dose-dependent manner. In addition, rituximab enhanced the cell growth inhibition and apoptotic cell death induced by the oxidative agent, H₂O₂. We propose that rituximab mediates a significant in vitro radiosensitizing effect and induces cell cycle changes and apoptosis in Raji cells. ROS probably play an important role in these events.     

Improved oxygen transfer and increased l-lactic acid production by morphology control of Rhizopus oryzae in a static bed bioreactor

Rhizopus oryzae was immobilized on a cotton matrix in a static bed bioreactor. Compared with free cells in a stirred tank bioreactor, immobilized R. oryzae in this bioreactor gave higher lactic acid production but lower ethanol production. The highest lactic acid production rate (2.09 g/L h) with the final concentration of 37.83 g/L from 70 g/L glucose was achieved when operating the bioreactor at 700 rpm and 0.5 vvm air. To better understand the relationship between shear effects (agitation and aeration) and R. oryzae morphology and metabolism, oxygen transfer rate, fermentation kinetics, and lactate dehydrogenase activity were determined. In immobilized cell culture, higher oxygen transfer rate and lactic acid production were achieved but lower lactate dehydrogenase activity was found as compared with those in free cell culture operated at the same conditions. These results clearly imply that mass transport was the rate controlling step in lactic acid fermentation by R. oryzae.     

Modelling faecal <Emphasis Type="Italic">streptococci</Emphasis> mortality in constructed wetlands implanted with <Emphasis Type="Italic">Eichhornia crassipes</Emphasis>

Faecal streptococci mortality was investigated in a water hyacinth (Eichhornia crassipes) constructed wetland pond. The wetland was 7.5 m long, 1.5 m wide and 1.0 m deep, and was implanted with E. crassipes. In order to assess the performance of the system towards bacterial mortality, a mathematical model, based on plug flow philosophy was developed. The model incorporated the role of factors, namely solar intensity, pH, dissolved oxygen, temperature, sedimentation, and root attached growth. Model analysis strongly suggests that bacterial mortality rate constant was largely influenced by two factors, namely solar intensity and root biofilm attachment, with both contributing approximately 70.5% of removal. The contribution of other factors like temperature, dissolved oxygen, pH and sedimentation on bacterial mortality rate were less significant. For example, dissolved oxygen, pH and sedimentation contributed 5%, 8% and 0.82%, respectively. Thus, the sedimentation factor was omitted from the model because of its insignificant contribution. The same was done for temperature, due to low ambient temperature range (3.1°C) in the study area. The overall model bacterial removal efficiency was 83%.     

Simulation of citric acid production by rotating disk contactor

A simple model was presented to describe the time courses of citric acid production by a rotating disc contactor (RDC) using Aspergillus niger. The model is expressed by Monod-type cell growth, Luedeking-Piret-type citric acid production rate equations, and the diffusion equation for oxygen in the biofilm. The model contains five parameters which were determined by the nonlinear least squares method by fitting the numerical solution to the experimental data. In solving the equations, the cell density of the biofilm was estimated from the value of cellular mass per unit of biofilm area using an empirical equation. The experimental time courses in citric acid production period were well simulated with this model. The relation between the specific biofilm surface area and the rate of citric acid production was also explained by the simulation using the average values of five parameters of twelve runs. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 56: 689-696, 1997.     

On‐line yeast propagation process monitoring and control using an intelligent automatic control system

The monitoring and control of bioprocesses is a challenging task. This applies particularly if the actions to the process have to be carried out in real‐time. This work presents a system for on‐line monitoring and control of batch yeast propagation under limiting conditions based on a virtual plant operator, which uses the concept of intelligent control algorithms by means of fuzzy logic theory. Process information is provided on‐line using a sensor array comprising the measurement of OD, operating temperature, pressure, density, dissolved oxygen, and pH value. In this context practical problems arising through on‐line sensing and signal processing are addressed. The preprocessed sensor data are fed to a neural network for on‐line biomass estimation. The root mean squared error of prediction is 4 × 10⁶ cells/mL. The proposed system then triggers temperature and aeration by usage of a temperature dependent metabolic growth model and sensor data. The deviation of the predicted biomass from that of the reference trajectory as modeled by the metabolic growth model and its temporal derivative are used as inputs for the fuzzy temperature controller. The inputs used by the fuzzy aeration controller are the deviation of measured extract from that of the reference trajectory, the predicted cell count, and the dissolved oxygen concentration. The fuzzy‐based expert system allows to provide the desired yeast cell concentration of 100–120 × 10⁶ cells/mL at a minimum residual extract limit of 6.0 g/100 g at the required point of time. Thus, a dynamic adjustment of the propagation process to the overall production schedule is possible in order to produce the required amount of biomass at the right time.     

Decolourization of anaerobically digested and polyaluminium chloride treated distillery spentwash in a fungal stirred tank aerobic reactor

Decolourization of anaerobically digested and polyaluminium chloride treated distillery spentwash was studied in a fungal stirred tank aerobic reactor without dilution of wastewater. Aspergillus niger isolate IITB-V8 was used as the fungal inoculum. The main objectives of the study were to optimize the stirrer speed for achieving maximum decolourization and to determine the kinetic parameters. A mathematical model was developed to describe the batch culture kinetics. Volumetric oxygen transfer coefficient (k _L a) was obtained using dynamic method. The maximum specific growth rate and growth yield of fungus were determined using Logistic equation and using Luedeking–Piret equation. 150 rpm was found to be optimum stirrer speed for overall decolourization of 87%. At the optimum stirrer speed, volumetric oxygen transfer coefficient (k _L a) was 0.4957 min⁻¹ and the maximum specific growth rate of fungus was 0.224 h⁻¹. The values of yield coefficient (Y _x/s) and maintenance coefficient (m _s) were found to be 0.48 g cells (g substrate)⁻¹ and 0.015 g substrate (g cells)⁻¹ h⁻¹.     

Atlantic Forest topsoil nutrients can be resistant to disturbance and forest clearing

Human impacts can affect the soil properties through erosion and leaching, the ecosystem functions and, consequently, the capacity of a forest to regenerate. Here, we determine the effects of forest disturbance and succession on selected soil chemical properties using two different approaches, before‐after‐control‐impact (BACI) and space‐for‐time (SFT) substitution, and the threatened Atlantic Forest biome as model. We assessed with BACI the long‐term (37‐year) effects of clear cutting on soil properties by comparing data from two topsoil surveys (1978–2017) divided into two treatments: a preserved old growth forest (control) and an adjacent forest that was experimentally cleared with full tree removal (clear‐cut). We examined with SFT the relationship between stand age and soil properties using soil data from three old growth and 13 s growth forests ranging from 7 to 33 years. We found no significant differences between treatments for any soil property or significant changes in phosphorus, potassium, and calcium + magnesium over time. In contrast, pH increased and aluminum decreased in both areas. No relation was found between forest age and most of soil properties, with the exception of potassium which returned to old growth forest levels after 20 years of natural succession, and pH. BACI indicated that deforestation of old growth forest caused no significant effects on soil chemical properties after 37 years of regeneration. SFT demonstrated that soil properties did not change significantly during forest regeneration on formerly disturbed lands. Our findings indicate that natural nutrient‐depleted lowland forests were overall resistant to deforestation followed by passive regeneration at landscape scale. Abstract in Portuguese is available with online material.     

A recombinant <Emphasis Type="Italic">E. coli</Emphasis> bioprocess for hyaluronan synthesis

An Escherichia coli strain, JM109, was successfully engineered into an efficient hyaluronic acid (HA) producer by co-expressing the only known class-II HA synthase from a Gram-negative bacterium (Pasteurella multocida) and uridine diphosphate-glucose dehydrogenase from E. coli K5 strain. The engineered strain produced about 0.5 g/L HA in shake flask culture and about 2.0–3.8 g/L in a fed-batch fermentation process in a 1-L bioreactor. The sharp increase in viscosity associated with HA accumulation necessitated pure oxygen supplement to maintain fermentation in aerobic regime. Precursor supply during HA synthesis was probed by glucosamine supplement, which shortens biosynthesis pathway and eliminates one step requiring ATP. HA synthesis was increased with glucosamine supplement from 2.7 to 3.7 g/L (37%), which was mirrored with a concomitant 42% decrease in pure oxygen input, suggesting a close connection between energy metabolism and precursor supply. Decoupling HA synthesis from cell growth by using fosfomycin (an inhibitor for cell wall synthesis) led to a 70% increase in HA synthesis, suggesting detrimental effects on HA synthesis from cell growth via precursor competition. This study demonstrates a potentially viable process for HA based on a recombinant E. coli strain. In addition, the precursor supply limitation identified in this study suggests new engineering targets in subsequent metabolic engineering efforts.     

Genetic structure of Sufflogobius bibarbatus in the Benguela upwelling ecosystem using microsatellite markers

The bearded goby Sufflogobius bibarbatus is an abundant endemic small fish species on the continental shelf of the northern Benguela. The goby habitat is characterised by generally low bottom oxygen concentrations that vary spatially and seasonally. In the present study of population structure, 13 samples of S. bibarbatus from inner and outer shelf areas between 19°S and 32°S were screened using ten microsatellite loci. The genetic data were analysed in relation to isolation by distance and depth. Furthermore, for the first time, this study examined genetic data in relation to bottom oxygen concentration at the sampling locations. The data show low but significant genetic heterogeneity (G-test; F_ST = 0.007, p < .05). There was weak but significant genetic differentiation along a latitudinal gradient across all sampling sites from 19.50°S to 32.37°S (Mantel test; r = .464, p = .001), but this disappeared when the southernmost sample was removed. On the other hand, a positive correlation of bottom oxygen concentration with pairwise F_ST (r = .336; p = .017) was observed among the sampling sites from the Northern Benguela shelf area. Overall, the data are complex but suggest that isolation by distance and bottom oxygen concentration may play a role in the genetic structuring of S. bibarbatus. The findings are discussed in relation to the species’ life history features and oceanographic characteristics of the Benguela upwelling ecosystem.     

Do radio collars influence mortality and reproduction? A case with ring-necked pheasants (<Emphasis Type="Italic">Phasianus colchicus</Emphasis>) in Central Italy

The effect of radio transmitters on bird survival and reproduction has been explored in the literature, and contradictory results were found. Using the Kaplan–Meier method, we estimated the mortality of female ring-necked pheasants (Phasianus colchicus) in relation to radio load (percentage of total body mass). Low-load birds showed a higher survival, particularly after 2–3 months from release, thus excluding short-term effects of handling and adjusting to packages. Reproductive success was higher for birds with low loads, but the effect was less clear. The results were not influenced by age or body mass. As a rule of thumb, using radio packages lighter than 1.5% of the body mass can be considered safe for pheasants, whereas loads above 2% may have adverse effects.