Hemoglobin recognition by imprinting in semi-interpenetrating polymer network hydrogel based on polyacrylamide and chitosan

Semi-interpenetrating polymer network (semi-IPN) hydrogel was prepared to recognize hemoglobin, by molecularly imprinted method, in the mild aqueous media of chitosan and acrylamide in the presence of N,N'-methylenebisacrylamide as the cross-linking agent. The hydrogel obtained has been investigated by using thermal analysis, X-ray diffraction, differential scanning calorimetry (DSC), and environmental scanning electron microscope (ESEM). Langmuir analysis showed that an equal class of adsorption was formed in the hydrogel, and the adsorption equilibrium constant and the maximum adsorption capacity were evaluated to be 4.27 g/mL and 36.53 mg/g wet hydrogel, respectively. The imprinted semi-IPN hydrogel has a much higher adsorption capacity for hemoglobin than the nonimprinted hydrogel with the same chemical composition and also has a higher selectivity for the imprinted molecule.     

Novel fabrication of morphology tailored nanostructures with Gelatin/Chitosan Co-polymeric bio-composited hydrogel system to accelerate bone fracture healing and hard tissue nursing care management

In this study, we are successfully fabricated on a hydrogel consisting of TiO₂ nanoparticles loaded onto a gelatin/chitosan matrix to control the acceleration of bone fracture healing and improved the nursing care applications. Each specimen (chitosan, gelatin and titanium dioxide) were characterized and confirmed by using different techniques, Fourier transforms infrared spectroscopy, X-ray diffraction analysis, Scanning Electron Microscopy with Elemental dispersive X-ray analysis, Thermo-gravimetric and Differential thermal analysis. In addition, the cell cytotoxicity results verified that the TiO₂/gelatin-chitosan hydrogel are nontoxic to osteoblasts. And cell fixation outcome after 5 days of incubation condition revels that the enhanced in vitro cell survival and cell spreading on the prepared TiO₂ incorporated hydrogel with respect to gelatin/chitosan hydrogel. Furthermore, TiO₂/gelatin-chitosan hydrogel nanostructures can modulate the bone fracture healing, indicating a potential application on nursing care.     

Synthesis and properties of chitosan hydrogels modified with heterocycles

Preparation and properties of chitosan modified with heterocycles in absence or presence of gluteraldehyde as a cross linker is described. New modified chitosan–heterocyclic hydrogels were prepared from chitosan and heterocyclic compounds such as N,N′-biisomaleimide, N,N′-biisophthalimide, and N,N′-phthalimidomaleimide via a crosslinking reaction. The new hydrogels chemical structure was characterized by spectral analysis (IR), X-ray diffraction, thermal gravimetric analysis (TGA), solubility, and swellability in water and different organic solvents. Evaluation of the efficiency of the new hydrogels to uptake copper and cobalt ions from aqueous systems was carried out and promising results were obtained.     

Novel complex hydrogels based on N-carboxyethyl chitosan and quaternized chitosan and their controlled in vitro protein release property

A novel pH-responsive hydrogel (CHC) composed of N-carboxyethyl chitosan (CEC) and N-[(2-hydroxy-3-trimethylammonium) propyl] chitosan chloride (HTCC) was synthesized by the redox polymerization technique. Turbidimetric titrations were used to determine the stoichiometric ratio of these two chitosan derivatives. The hydrogel was characterized by FT-IR, thermal gravimetric analysis (TGA), X-ray diffractometry (XRD), and scanning electron microscopy (SEM). The dynamic transport of water showed that the hydrogel reached equilibrium within 48 h. The swelling ratio of CHC hydrogel depended significantly on the pH of the buffer solution. The performance of the CHC as a matrix for the controlled release of BSA was investigated. It was found that the release behavior was determined by pH value of the medium as well as the intermolecular interaction between BSA and the hydrogels.     

Rheological characterisation of a novel thermosensitive chitosan/poly(vinyl alcohol) blend hydrogel

Thermosensitive hydrogels that are triggered by changes in environmental temperature thus resulting in in situ hydrogel formation have recently attracted the attention of many investigators for biomedical applications. In the current work, the thermosensitive hydrogel was prepared through the mixture of chitosan (CS), poly(vinyl alcohol) (PVA) and sodium bicarbonate. The mixture was liquid aqueous solutions at low temperature (about 4 °C), but a gel under physiological conditions. The hydrogel was characterized by FTIR, swelling and rheological analysis. The effect of hydrogel composition and temperature on both the gel process and the gel strength was investigated from which possible hydrogel formation mechanisms were inferred. In addition, the hydrogel interior morphology as well as porosity of structure was evaluated by scanning electron microscopy (SEM). The potential of the hydrogels as vehicles for delivering bovine serum albumin (BSA) were also examined. In this study, the physically crosslinked chitosan/PVA gel was prepared under mild conditions without organic solvent, high temperature or harsh pH. The viscoelastic properties, as investigated rheologically, indicate that the gel had good mechanical strength. The gel formed implants in situ in response to temperature change, from low temperature (about 4 °C) to body temperature, which was very suitable for local and sustained delivery of proteins, cell encapsulation and tissue engineering.     

Spray-dried chitosan microspheres containing 8-hydroxyquinoline -5 sulphonic acid as a new adsorbent for Cd(II) and Zn(II) ions

In the present study, a new chelating adsorbent was prepared from chitosan microspheres cross-linked with glutaraldehyde by spray drying using 8-hydroxyquinoline -5 sulphonic acid as chelant agent (CTS-SX-CL). Microspheres of the new adsorbent were characterized by Raman spectroscopy, scanning electron microscopy (SEM) and energy-dispersive X-ray microanalysis (EDX). The effect of pH, contact time and concentration of metallic ions in solution were evaluated on the adsorption behavior of Cd(II) and Zn(II) by CTS-SX-CL. Adsorption was maximum for both Cd(II) and Zn(II) at pH 8.0. Adsorption kinetic curves were obtained and could be fit by the pseudo second-order adsorption model. An analysis of equilibrium adsorption data using the Langmuir isotherm model indicated that the maximum adsorption capacity of CTS-SX-CL was higher than that of CTS-CL for both ions investigated. The adsorption capacity increased 74% for Cd(II).     

Cytotoxic activities of chitosan nanoparticles and copper-loaded nanoparticles

Chitosan nanoparticles and copper(II)-loaded chitosan nanoparticles were prepared based on the ionic gelation of chitosan with tripolyphosphate anions and copper ion sorption. In this study, the cytotoxic activities of the chitosan nanoparticles and copper(II)-loaded chitosan nanoparticles was investigated and a relationship between physiochemical properties and activity is suggested. The chitosan nanoparticles and copper(II)-loaded chitosan nanoparticles elicited dose-dependent inhibitory effects on the proliferation of tumor cell lines.     

Preparation and characterization of chitosan encapsulated Sargassum sp. biosorbent for nickel ions sorption

A new biosorbent - Sargassum sp. encapsulated with epichlorohydrin (ECH) cross-linked chitosan (CS) was investigated for nickel ions removal. The prepared biosorbent with Sargassum sp. to cross-linked chitosan of 3 (weight ratio) had the highest sorption capacity. The biosorption kinetics can be well fitted by the diffusion-controlled model. The organic leaching of CS was 77-88% less than that of algae at different pH. The biosorption capacity of nickel on CS was much higher than that of cross-linked chitosan (CLC) bead and lower than that of raw algae due to encapsulation. In addition, the reusability of CS was further evaluated and confirmed through five adsorption-desorption cycles. Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) analysis demonstrated that the nickel ions sequestration mechanism included ion exchange and nickel complexation with the carboxyl, amino, alcoholic and ether groups in CS.     

Encapsulation of ciprofloxacin within modified xanthan gum- chitosan based hydrogel for drug delivery

The aim of the present work was to investigate the preparation of polyelectrolyte hydrogel as potential drug carrier for antibacterial Ciprofloxacin drug (CFX), intended for controlled release formulation. Hydrogel of N-trimehtyl chitosan (TMC)/sodium carboxymethyl xanthan gum (CMXG) was prepared and ciprofloxacin was employed as a model drug to investigate the loading and release performance of the prepared hydrogel. FTIR, DSC, TGA and SEM analysis were used to characterize the TMC/CMXG hydrogel and its CFX loaded hydrogel. The results showed that the ciprofloxacin was successfully incorporated and released from the prepared hydrogel without the loss of structural integrity or the change in its functionality. The encapsulation efficiency of CFX within the prepared hydrogel was found to be increased with increasing the concentration of drug reaching about 93.8 ± 2.1% with concentration of CFX 250 µg/ml. It was shown also that the drug is entrapped within the gel without significant interaction as confirmed from FTIR spectra and DSC analysis. In vitro release study in phosphate buffer saline (PBS), indicated the steady rise in cumulative drug release with the highest release amount, reaching about 96.1 ± 1.8% up to 150 min, whereby the gel with high drug loading efficiency (3.52 ± 0.07%) displayed faster and higher release rate than that of gel containing a smaller amount of drug (0.44 ± 0.01%). The release kinetics of loaded drug followed zero-order kinetics. CFX drug loaded hydrogel showed high activity against the gram positive and gram negative bacterial strains due to the successful released of CFX from the CFX loaded hydrogel into the tested bacterial strains with the highest diameter of inhibition zone against Escherichia coli (67.0 ± 1.0) as compared to reference antibiotic, Gentamicin (28 ± 0.5). Cytotoxicity of the prepared hydrogel was examined in vitro using lung human normal cell lines and showed the highest cell viability (97 ± 0.5%) at concentration up to 50 µg/ml. Consequently, TMC/CMXG hydrogel can be proposed as new controlled release drug delivery system.     

Synthesis and characterization of pH-sensitive hydrogel composed of carboxymethyl chitosan for colon targeted delivery of ornidazole

In the present study, carboxymethyl chitosan was prepared from chitosan, crosslinked with glutaraldehyde and evaluated in vitro as a potential carrier for colon targeted drug delivery of ornidazole. Ornidazole was incorporated at the time of crosslinking of carboxymethyl chitosan. The chitosan was evaluated for its degree of deacetylation (DD) and average molecular weight; which were found to be 84.6% and 3.5×10(4) Da, respectively. The degree of substitution on prepared carboxymethyl chitosan was found to be 0.68. All hydrogel formulations showed more than 85% and 74% yield and drug loading, respectively. The swelling behaviour of prepared hydrogels checked in different pH values, 1.2, 6.8 and 7.4, indicated pH responsive swelling characteristic with very less swelling at pH 1.2 and quick swelling at pH 6.8 followed by linear swelling at pH 7.4 with slight increase. In vitro release profile was carried out at the same conditions as in swelling and drug release was found to be dependant on swelling of hydrogels and showed biphasic release pattern with non-fickian diffusion kinetics at higher pH. The carboxymethylation of chitosan, entrapment of drug and its interaction in prepared hydrogels were checked by FTIR, (1)H NMR, DSC and p-XRD studies, which confirmed formation of carboxymethyl chitosan from chitosan and absence of any significant chemical change in ornidazole after being entrapped in crosslinked hydrogel formulations. The surface morphology of formulation S6 checked before and after dissolution, revealed open channel like pores formation after dissolution.     

Assessment of the anti-biofouling potentials of a copper iodide-doped nylon mesh

We propose a copper iodide (CuI)-doped nylon mesh prepared using polyiodide ions as a precursor toward anti-biofouling polymer textile. The CuI-doped nylon mesh was subjected to the prevention of biofouling in marine environments. The attachment of the marine organisms was markedly inhibited on the CuI-doped nylon mesh surface until 249 days. Scanning electron microscopy-energy dispersive X-ray analysis indicated that copper compounds were maintained in the nylon mesh after the field experiment, although copper content in the nylon mesh was reduced. Therefore, the copper ions slowly dissolved from nylon mesh will contribute to the long-term prevention of biofouling. Furthermore, electron spin resonance analysis revealed the generation of reactive oxygen species (ROS) from CuI-doped nylon mesh after the field experiment. One of the possibilities for toxic action of copper ions will be the direct effect of Cu+ -induced ROS on biofilm forming on nylon mesh surface. The proposed polymer textile can be applied to fishing and aquafarming nets, mooring rope for ship, or silt fence to restrict polluted water in marine environments.     

Design,Optimization, and Evaluation of a Novel Metronidazole-Loaded Gastro-Retentive pH-Sensitive Hydrogel

Floating pH-sensitive chitosan hydrogels containing metronidazole were developed for the eradication of Helicobacter pylori from the stomach. Hydrogels were prepared by crosslinking medium or high molecular weight chitosan in lyophilized solutions containing metronidazole using either citrate or tripolyphosphate (TPP) salts at 1% or 2% concentration. A 2³ factorial design was developed to study the influence of formulation parameters on the physical characteristics of the prepared hydrogels. The interaction between hydrogel components was investigated. The morphology of the prepared hydrogels was inspected and their percentage swelling, release pattern, and moisture content were evaluated. The results revealed the absence of interaction between hydrogel components and their highly porous structure. Percentage swelling of the hydrogels was much higher, and drug release was faster in gastric pH compared with intestinal pH. The formula prepared using 2% high molecular weight chitosan and 2% TPP significantly swelled (700%) within the first 4 h and released the loaded drug over a period of 24 h. Its moisture content was not affected by storage at high relative humidity. Therefore, this formula was selected to be tested in dogs for its gastric retention (using X-ray radiography) and efficacy in the eradication of H. pylori (using histopathological and microbiological examination). The results revealed that the prepared hydrogel formula was retained in dog stomach for at least 48 h, and it was more effective against H. pylori than the commercially available oral metronidazole tablets (Flagyl®).     

Removal of copper(II) using chitin/chitosan nano-hydroxyapatite composite

Polymeric composites made up of nano-hydroxyapatite (n-HAp) with chitin and chitosan have been prepared and studied for the removal of Cu(II) ions from the aqueous solution. The sorption capacity (SC) of n-HAp, n-HAp/chitin (n-HApC) composite and n-HAp/chitosan (n-HApCs) composite were found to be 4.7, 5.4 and 6.2 mg/g respectively with a minimum contact time of 30 min. Batch adsorption studies were conducted to optimize various equilibrating conditions like contact time, pH and selectivity of metal ion. The sorbents were characterized by FTIR, TEM, XRD and SEM with EDAX analysis. The sorption process was explained with Freundlich and Langmuir isotherms respectively. Thermodynamic parameters such as ΔG°, ΔH° and ΔS° were calculated to understand the nature of sorption. A suitable mechanism for copper sorption was established and the selectivity of the metal ions for the composites was identified.     

Removal of copper, chromium, and arsenic from CCA-treated wood onto chitin and chitosan

Chitin and chitosan are naturally abundant biopolymers which are of interest to research concerning the sorption of metal ions since the amine and hydroxyl groups on their chemical structures act as chelation sites for metal ions. This study evaluates the removal of copper, chromium, and arsenic elements from chromated copper arsenate (CCA)-treated wood via biosorption by chitin and chitosan. Exposing CCA-treated sawdust to various amounts of chitin and chitosan for 1, 5, and 10 days enhanced removal of CCA components compared to remediation by deionized water only. Remediation with a solution containing 2.5 g chitin for 10 days removed 74% copper, 62% chromium, and 63% arsenic from treated sawdust. Remediation of treated sawdust samples using the same amount of chitosan as chitin resulted in 57% copper, 43% chromium, and 30% arsenic removal. The results suggest that chitin and chitosan have a potential to remove copper element from CCA-treated wood. Thus, these more abundant natural amino polysaccharides could be important in the remediation of waste wood treated with the newest formulations of organometallic copper compounds and other water-borne wood preservatives containing copper.     

Preparation and characterization of novel chitosan/gelatin membranes using chitosan hydrogel

Chitin and chitosan are novel biomaterials. The novel chitosan/gelatin membranes were prepared using the suspension of chitosan hydrogel mixed with gelatin. The prepared chitosan/gelatin membranes were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), mechanical, swelling, and thermal studies. The morphology of these chitosan/gelatin membranes was found to be very smooth and homogeneous. The XRD studies showed that the chitosan/gelatin membranes have good compatibility and interaction between the chitosan and gelatin. The stress and elongation of chitosan/gelatin membranes on wet condition showed excellent when the mixture ratio of gelatin was 0.50. The prepared chitosan/gelatin membranes showed good swelling, mechanical and thermal properties. Cell adhesion studies were also carried out using human MG-63 osteoblast-like cells. The cells incubated with chitosan/gelatin membranes for 24 h were capable of forming cell adhesion. Thus the prepared chitosan/gelatin membranes are bioactive and are suitable for cell adhesion suggesting that these membranes can be used for tissue-engineering applications. Therefore, these novel chitosan/gelatin membranes are useful for biomedical applications.     

Adsorptive removal of copper and nickel ions from water using chitosan coated PVC beads

A new biosorbent was developed by coating chitosan, a naturally and abundantly available biopolymer, on to polyvinyl chloride (PVC) beads. The biosorbent was characterized by FTIR spectra, porosity and surface area analyses. Equilibrium and column flow adsorption characteristics of copper(II) and nickel(II) ions on the biosorbent were studied. The effect of pH, agitation time, concentration of adsorbate and amount of adsorbent on the extent of adsorption was investigated. The experimental data were fitted to Langmuir and Freundlich adsorption isotherms. The data were analyzed on the basis of Lagergren pseudo first order, pseudo-second order and Weber-Morris intraparticle diffusion models. The maximum monolayer adsorption capacity of chitosan coated PVC sorbent as obtained from Langmuir adsorption isotherm was found to be 87.9 mg g(-1) for Cu(II) and 120.5 mg g(-1) for Ni(II) ions, respectively. In addition, breakthrough curves were obtained from column flow experiments. The experimental results demonstrated that chitosan coated PVC beads could be used for the removal of Cu(II) and Ni(II) ions from aqueous medium through adsorption.     

Preparation and evaluation of chitosan/carrageenan beads for controlled release of sodium diclofenac

The polyelectrolyte complex (PEC) hydrogel beads based on chitosan (CS) and carrageenan (CR) have been studied as a controlled release device to deliver sodium diclofenac (DFNa) in the simulated gastrointestinal condition. Various factors potentially influencing the drug release (ie, CS/CR proportion, DFNa content, types and amount of cross-linking agents) were also investigated. The optimal formulation was obtained with CS/CR proportion of 2/1 and 5% (wt/vol) DFNa. The controlled release of the drug from this formulation was superior to other formulations and was able to maintain the release for approximately 8 hours. Upon cross-linking with glutaric acid and glutaraldehyde, the resulting beads were found to be more efficient for prolonged drug release than their non-cross-linking counterparts. The bead cross-linked with glutaraldehyde was able to control the release of the drug over 24 hours. The difference in the drug release behavior can be attributed to the differences in ionic interaction between the oppositely charged ions and to the concentrations of the drug within the beads, which depends on the compositions of the formulation and the pH of the dissolution medium. The release of drug was controlled by the mechanism of the dissolution of DFNa in the dissolution medium and the diffusion of DFNa through the hydrogel beads.     

Studies of metal-sugar complexes in the solid state by the 13C-n.m.r. c.p.-m.a.s. method

Several metal-sugar conjugates have been prepared. Chelate coordination complexes of copper(II) and zinc(II) were prepared from salicylaldimine ligands derived from combinations of methyl 3,4,6-tri-O-acetyl-2-amino-2-deoxy-β-d-glucopyranoside or 1,3,4,6-tetra-O-acetyl-2-amino-2-deoxy-β-d-glucopyranose and salicylaldehyde. Similar Schiff's bases were prepared from chitosan and complexed to copper(II). Cross-polarisation-magic angle spinning ¹³C-n.m.r. spectroscopy showed that paramagnetic ions have profound effects on the resolution obtainable and, at high concentration, result in broad, featureless spectra. In contrast, diamagnetic ions have little effect on the isotropic chemical shifts of the sugar chelates.     

In vitro antifungal activity of metal complexes of a quaternized chitosan derivative with copper ions

Antifungal activity of synthetic metal complexes of quaternized N-(propyl) chitosan derivatives with Сu(II) against yeastlike (Saccharomyces cereviseae, Rodothorula rubra, and Candida albicans) and mycelial fungi (Fusarium oxysporum, Alternaria alternata, Cladosporium herbarum) was studied. In vitro application (at 250?500 μg/mL) of the metal complex of quaternized N-(propyl) derivative of low-molecular chitosan with 53% substitution and 1.3% copper ions proved efficient against F. оxysporum, one of ten most common fungal plant pathogens. Water-soluble quaternized N-(propyl) chitosan derivatives with 40?58% degree of substitution were synthesized using glycidyltrimethylammonium chloride under optimally adjusted conditions. Metal complexes of the chitosan derivative with 53% degree of substitution with Сu(II) ions were obtained by dialysis. The quantity of copper ions in the metal complexes was determined by atomic emission spectrometry. The structure of chitosan derivatives was confirmed by spectral analysis (IR, ¹H NMR).     

Preparation of <Emphasis Type="Italic">in situ</Emphasis> Injectable Chitosan/Gelatin Hydrogel Using an Acid-tolerant Tyrosinase

An in situ injectable chitosan/gelatin hydrogel was formed under slightly acidic conditions (pH 4.0 ~ 4.5) using an acid-tolerant tyrosinase, tyrosinase-CNK. A homogeneous chitosan/tyrosinase-CNK solution was prepared in one part of a dual-barrel syringe, and highly soluble gelatin in distilled water was prepared in the other part of the syringe without any additional crosslinking materials. Chitosan/gelatin hydrogel was formed in situ by simple injection of the solutions at room temperature followed by curing at 37°C. However, conventional mushroom tyrosinase did not catalyze this permanent gel formation. Tyrosinase- CNK-catalyzed glycol chitosan/gelatin hydrogel was similarly formed by this in situ injection approach. The hydrogels exhibited a high swelling ratio of 20-fold their own weight, interconnected micropores with an average diameter of approximately 260 μm and in vitro biodegradability suitable for tissue engineering and drug delivery applications. These results showed that tyrosinase-CNK-mediated chitosan/gelatin hydrogel formation has remarkable potential for the development of novel formulations for in situ injectable gel-forming systems.