Catalytic conversion of glucose to 5-hydroxymethyl furfural using inexpensive co-catalysts and solvents

Efficient conversion of glucose to 5-hydroxymethyl furfural (5-HMF), a platform chemical for fuels and materials, was achieved using CrCl₂ or CrCl₃ as the catalysts with inexpensive co-catalysts and solvents including halide salts in dimethyl sulfoxide (DMSO) and several ionic liquids. 5-HMF (54.8%) yield was achieved with the CrCl₂/tetraethyl ammonium chloride system at mild reaction conditions (120 °C and 1 h). The 5-HMF formation reaction was found to be faster in ionic liquids than in the DMSO system. Effects of water in the reaction system, chromium valence and reaction temperature on the conversion of glucose into 5-HMF were discussed in this work.     

Catalytic conversion of cellulose to chemicals in ionic liquid

A simple and effective route for the production of 5-hydroxymethyl furfural (HMF) and furfural from microcrystalline cellulose (MCC) has been developed. CoSO₄ in an ionic liquid, 1-(4-sulfonic acid) butyl-3-methylimidazolium hydrogen sulfate (IL-1), was found to be an efficient catalyst for the hydrolysis of cellulose at 150 °C, which led to 84% conversion of MCC after 300 min reaction time. In the presence of a catalytic amount of CoSO₄, the yields of HMF and furfural were up to 24% and 17%, respectively; a small amount of levulinic acid (LA) and reducing sugars (8% and 4%, respectively) were also generated. Dimers of furan compounds were detected as the main by-products through HPLC-MS, and with the help of mass spectrometric analysis, the components of gas products were methane, ethane, CO, CO_2, and H₂. A mechanism for the CoSO₄-IL-1 hydrolysis system was proposed and IL-1 was recycled for the first time, which exhibited favorable catalytic activity over five repeated runs. This catalytic system may be valuable to facilitate energy-efficient and cost-effective conversion of biomass into biofuels and platform chemicals.     

Biotransformation of furfural and 5-hydroxymethyl furfural by enteric bacteria

Summary A survey was conducted with seventeen enteric bacterial strains (including the generaKlebsiella, Enterobacter, Escherichia, Citrobacter, Edwardsiella andProteus) to examine their ability to transform furfural and 5-hydroxymethyl furfural (5-MHF). The enteric bacteria were able to convert furfural to furfuryl alcohol under both aerobic and anaerobic conditions in a relatively short incubation time of 8 h. 5-HMF was transformed by all the enteric bacteria studied to an unidentified compound postulated to be 5-hydroxymethyl furfuryl alcohol, which had an absorbance maximum of 222 nm. These bacteria did not transform furfuryl alcohol or 2-furoic acid. The enteric bacteria did not use furfural, 5-HMF, furfuryl alcohol or 2-furoic acid as sole source of carbon and energy. Biotransformation of furfural and 5-HMF was accomplished by co-metabolism in the presence of glucose and peptone as main substrates. The rate of transformation was similar under both aerobic and anaerobic conditions. These transformations are likely to be of value in the detoxification of furfurals, and in their ultimate conversion to methane and CO₂ by anaerobic digestion.     

Dissolution of cellulose in phosphate-based ionic liquids

Two kinds of alkylimidazolium salts containing dimethyl phosphate or diethyl phosphate were obtained as room temperature ionic liquids synthesized by one step, and both of them have the ability to dissolve untreated cellulose. Especially, 1-ethyl-3-methylimidazolium diethylphosphonate ([EMIM]DEP) could obtain 4 wt% cellulose solution within 10 min under 90. The effects of dissolution temperature on cellulose dissolution time and degree of polymerization were investigated. As dissolution temperature increased, dissolution time was greatly reduced. Both the original and regenerated cellulose samples were characterized with wide-angle X-ray diffraction, thermogravimetric analysis and scanning electron micrograph. The results showed that the crystalline structure of cellulose was converted to cellulose II from cellulose I in native cellulose. It was also found that the regenerated cellulose had good thermal stability with [EMIM]DEP ionic liquid.     

Biotransformation of furfural and 5-hydroxymethyl furfural (HMF) by Clostridium acetobutylicum ATCC 824 during butanol fermentation

The ability of fermenting microorganisms to tolerate furan aldehyde inhibitors (furfural and 5-hydroxymethyl furfural (HMF)) will enhance efficient bioconversion of lignocellulosic biomass hydrolysates to fuels and chemicals. The effect of furfural and HMF on butanol production by Clostridium acetobutylicum 824 was investigated. Whereas specific growth rates, μ, of C. acetobutylicum in the presence of furfural and HMF were in the range of 15-85% and 23-78%, respectively, of the uninhibited Control, μ increased by 8-15% and 23-38% following exhaustion of furfural and HMF in the bioreactor. Using high performance liquid chromatography and spectrophotometric assays, batch fermentations revealed that furfural and HMF were converted to furfuryl alcohol and 2,5-bis-hydroxymethylfuran, respectively, with specific conversion rates of 2.13g furfural and 0.50g HMF per g (biomass) per hour, by exponentially growing C. acetobutylicum. Biotransformation of these furans to lesser inhibitory compounds by C. acetobutylicum will probably enhance overall fermentation of lignocellulosic hydrolysates to butanol.     

Green microwave-assisted synthesis of cellulose/calcium silicate nanocomposites in ionic liquids and recycled ionic liquids

Fabrication of biomass materials by a microwave-assisted method in ionic liquids allows the high value-added applications of biomass by combining three major green chemistry principles: using environmentally preferable solvents, using an environmentally friendly method, and making use of renewable biomass materials. Herein, we report a rapid and green microwave-assisted method for the synthesis of the cellulose/calcium silicate nanocomposites in ionic liquids and recycled ionic liquids. These calcium silicate nanoparticles or nanosheets as prepared were homogeneously dispersed in the cellulose matrix. The experimental results confirm that the ionic liquids can be used repeatedly. Of course, the slight differences were also observed using ionic liquids and recycled ionic liquids. Compared with other conventional methods, the rapid, green, and environmentally friendly microwave-assisted method in ionic liquids opens a new window to the high value-added applications of biomass.     

Production of bioactive cellulose films reconstituted from ionic liquids

A new method for introducing enzymes into cellulosic matrixes which can be formed into membranes, films, or beads has been developed using a cellulose-in-ionic-liquid dissolution and regeneration process. Initial results on the formation of thin cellulose films incorporating dispersed laccase indicate that active enzyme-encapsulated films can be prepared using this methodology and that precoating the enzyme with a second, hydrophobic ionic liquid prior to dispersion in the cellulose/ionic liquid solution can provide an increase in enzyme activity relative to that of untreated films, presumably by providing a stabilizing microenvironment for the enzyme.     

Preparation of chitin/cellulose composite gels and films with ionic liquids

In this study, we performed preparation and characterizations of the chitin/cellulose composite gels and films using the two ionic liquids, 1-allyl-3-methylimidazolium bromide and 1-butyl-3-methylimidazolium chloride. First, chitin and cellulose were dissolved in each appropriate ionic liquid. Then, the two liquids were mixed in the desired ratios at 100 °C to give the homogeneous mixtures. The gels were obtained by standing the mixtures for 4 days. On the other hand, the films were obtained by casting the mixtures on glass plates, followed by soaking in water and drying. The obtained gels and films were characterized by XRD and TGA measurements. The mechanical properties of the gels and films were evaluated under compressive and tensile modes, respectively.     

Crown ether-mediated extraction and functional conversion of cytochrome C in ionic liquids

We report that a macrocyclic ligand enables transfer of a protein from an aqueous phase to ionic liquids. The extraction behavior of heme protein cytochrome c (Cyt-c) from an aqueous phase into ionic liquids was investigated with crown ethers. A hydroxyl-group-containing ionic liquid with dicyclohexano-18-crown-6 was found to be capable of quantitative partitioning of Cyt-c, whereas the protein transfer using conventional organic solvents was negligibly small. Furthermore, we clarified that Cyt-c solubilized in ionic liquids caused a structural transformation of Cyt-c, which triggers its functional conversion from an electron-transfer protein to peroxidase.     

Imidazolium-based ionic liquids for cellulose pretreatment: recent progresses and future perspectives

Applied Microbiology and Biotechnology - As the most abundant biomass in nature, cellulose is considered to be an excellent feedstock to produce renewable fuels and fine chemicals. Due to its...     

Partitioning of acidic, basic and neutral amino acids into imidazolium-based ionic liquids

In this paper, partitioning behaviors of typical neutral (Alanine), acidic (Glutamic acid) and basic (Lysine) amino acids into imidazolium-based ionic liquids [C₄mim][PF₆], [C₆mim][PF₆], [C₈mim][PF₆], [C₆mim][BF₄] and [C₈mim][BF₄] as extracting solvents were examined. [C₆mim][BF₄] showed the best efficiency for partitioning of amino acids. The partition coefficients of amino acids in ionic liquids were found to depend strongly on pH of the aqueous solution, amino acid and ionic liquid chemical structures. Different chemical forms of amino acids in aqueous solutions were pH dependent, so the pH value of the aqueous phase was a determining factor for extraction of amino acids into ionic liquid phase. Both water content of ionic liquids and charge densities of their anionic and cationic parts were important factors for partitioning of cationic and anionic forms of amino acids into ionic liquid phase. Extracted amino acids were back extracted into phosphate buffer solutions adjusted on appropriate pH values. The results showed that ionic liquids could be used as suitable modifiers on the stationary phase of an HPLC column for efficient separation of acidic, basic, and neutral amino acids.     

NADH- vs NADPH-coupled reduction of 5-hydroxymethyl furfural (HMF) and its implications on product distribution in Saccharomyces cerevisiae

Saccharomyces cerevisiae alcohol dehydrogenases responsible for NADH-, and NADPH-specific reduction of the furaldehydes 5-hydroxymethyl-furfural (HMF) and furfural have previously been identified. In the present study, strains overexpressing the corresponding genes (mut-ADH1 and ADH6), together with a control strain, were compared in defined medium for anaerobic fermentation of glucose in the presence and absence of HMF. All strains showed a similar fermentation pattern in the absence of HMF. In the presence of HMF, the strain overexpressing ADH6 showed the highest HMF reduction rate and the highest specific ethanol productivity, followed by the strain overexpressing mut-ADH1. This correlated with in vitro HMF reduction capacity observed in the ADH6 overexpressing strain. Acetate and glycerol yields per biomass increased considerably in the ADH6 strain. In the other two strains, only the overall acetate yield per biomass was affected. When compared in batch fermentation of spruce hydrolysate, strains overexpressing ADH6 and mut-ADH1 had five times higher HMF uptake rate than the control strain and improved specific ethanol productivity. Overall, our results demonstrate that (1) the cofactor usage in the HMF reduction affects the product distribution, and (2) increased HMF reduction activity results in increased specific ethanol productivity in defined mineral medium and in spruce hydrolysate.     

Mild pretreatment and enzymatic saccharification of cellulose with recycled ionic liquids towards one-batch process

The development of second-generation bioethanol involves minimizing the energy input throughout the processing steps. We report here that efficient ionic liquid pretreatments of cellulose can be achieved with short duration times (20min) at mild temperature (45°C) with [Emim](+)[MeO(H)PO(2)](-) and at room temperature (25°C) with [Emim](+)[CH(3)COO](-). In these conditions, yields of glucose were increased by a factor of 3. In addition, the recycling of these two imidazolium-based ILs can be performed in maintaining their efficiency to pretreat cellulose. The short time and mild temperature of cellulose solubilization allowed a one-batch processing of [Emim](+)[MeO(H)PO(2)](-) IL-pretreatment and saccharification. In the range from 0 to 100% IL in an aqueous enzymatic medium, the glucose yields were improved at IL proportions between 10 and 40%. The maximum yield at 10% IL is very promising to consider one batch process as efficient as two-step process.     

The effects of acetate anion on cellulose dissolution and reaction in imidazolium ionic liquids

Quantum mechanical calculations were carried out to determine the mechanisms for the superiority of the imidazolium acetate-based ionic liquids to the corresponding chloride-based ionic liquids. Our results indicate that the imidazolium cation can react with the acetate anion to generate a carbene, a highly reactive intermediate. The carbene produced then reacts with cellulose to facilitate its dissolution in the ionic liquid solvents in addition to the stronger hydrogen bonds formed between the acetate anion and the hydroxyl groups on cellulose. The mechanisms for the imidazolium cation and acetate anion reactions involve the initial ion pairing of the cation and anion via hydrogen bonding and electrostatic interactions. The hydrogen bond formed between the C2–H on the imidazolium cation and COO⁻ of the anion facilitates the transfer of the H⁺ to the anion to form a carbene intermediate.     

Adaptive response of yeasts to furfural and 5-hydroxymethylfurfural and new chemical evidence for HMF conversion to 2,5-bis-hydroxymethylfuran

Renewable lignocellulosic materials are attractive low-cost feedstocks for bioethanol production. Furfural and 5-hydroxymethylfurfural (HMF) are among the most potent inhibitory compounds generated from acid hydrolysis of lignocelluloses to simple sugars for fermentation. In Saccharomyces cerevisiae ATCC 211239 and NRRL Y-12632 and Pichia stipitis NRRL Y-7124, furfural and HMF inhibition were determined to be dose-dependent at concentrations from 10 to 120 mM. The yeast strains were more sensitive to inhibition by furfural than HMF at the same concentration, while combined treatment of furfural and HMF synergistically suppressed cell growth. A metabolite transformed from HMF by strain NRRL Y-12632 was isolated from the culture supernatant, and conclusively identified as 2,5-bis-hydroxymethylfuran, a previously postulated HMF alcohol, with a composition of C₆H₈O₃ and a molecular weight of 128. It is proposed that, in the presence of HMF, the yeast reduces the aldehyde group on the furan ring of HMF into an alcohol, in a similar manner as for furfural. The accumulation of this biotransformed metabolite may be less toxic to yeast cultures than HMF, as evidenced by the rapid yeast fermentation and growth rates associated with HMF conversion. The ability of yeasts to adapt to and transform furfural and HMF offers the potential for in situ detoxification of these inhibitors and suggests a genetic basis for further development of highly tolerant strains for biofuel production.     

Molecular dynamic studies of the compatibility of some cellulose derivatives with selected ionic liquids

Molecular dynamics techniques were used to study oligomers that mimic cellulose and various derivatives in the amorphous phase, including cellulose (C), methyl cellulose (MC), hydroxypropyl cellulose (HPC), and carboxymethyl cellulose (CMC). Densities and solubility parameters were determined for a series of oligomers with increasing chain length. Both properties were found to change linearly with the degree of polymerization (from monomers to dodecamers). Extrapolated predictions of the densities (g/cm³) for long chain polymers are: C, 1.42; MC, 1.33; HPC, 1.30; and CMC, 1.42. Computed values for the solubility parameter (MPa^1/2) are: C, 25.39; MC, 21.43; HPC, 21.70; and CMC, 24.35. We also evaluated the sensitivity of the solubility parameter to changes in the calculated density and found the dependence to be significant. The calculated solubility parameters were evaluated against experimental and other theoretical values as well as against selected ionic liquids comprised of cations in the imidazolium family and the chloride and trifluoroacetate anions.     

Investigations about dissolution of cellulose in the 1-allyl-3-alkylimidazolium chloride ionic liquids

In this work, the 1-allyl-3-alkylimidazolium chloride ionic liquids were synthesized and characterized by increasing carbon atoms (n ≤ 6) of alkyl chains on a cationic 3-imidazole ring. The results indicated that 1-allyl-3-alkylimidazolium chloride with asymmetrical structure on the two sides of a cationic 3-imidazole ring (i.e., n = 1, 2, 6) exhibited alkalinity and lower thermal stabilities, and showed better solubility to the cellulose samples at 60-120 °C than those with symmetrical structures (n = 3, 4). The cellulose samples treated by 20% (w/w) ethylenediamine solution showed better solubility in 1-allyl-3-ethyl, hexyl-imidazolium chloride ionic liquids than that treated with 20% (w/w) NaOH solution at 5 °C for 72 h. XRD and TG analysis indicated that 0 0 2 plane apparent crystallite size as well as thermal stability of the regenerated cellulose samples from the ionic liquids decreased significantly compared with the untreated cellulose samples.     

An efficient catalytic dehydration of fructose and sucrose to 5-hydroxymethylfurfural with protic ionic liquids

The renewable furan-based platform chemical, 5-hydroxymethylfurfural (HMF), has been efficiently synthesized from d-fructose and sucrose in the presence of a catalytic amount of protic ionic liquids. The 1-methylimidazolium-based and N-methylmorpholinium-based ionic liquids are employed. As a result, 74.8% and 47.5% yields of HMF are obtained from d-fructose and sucrose, respectively, at 90 °C for 2 h under nitrogen atmosphere when N-methylmorpholinium methyl sulfonate ([NMM]⁺[CH₃SO₃]⁻) is used as the catalyst in an N,N-dimethylformamide-lithium bromide (DMF-LiBr) system. The acidities of ionic liquids are determined by the Hammett method, and the correlation between acidity and catalytic activity is discussed. Moreover, the effects of reaction temperature and time are investigated, and a plausible reaction mechanism for the dehydration of d-fructose is proposed.     

Biotransformation of furfural by yeast cells covalently bound to cellulose granules

A covalent binding to cellulose granules of two yeast strains Candida tropicalis and Trichosporon cutaneum was achieved. The maximum activity for destroying furfural by the immobilized cells was obtained when the procedure conditions were: reaction medium at pH 5.0, 20°C and cell suspension concentration of 80 mg/ml. The continuous furfural transformation was studied using a growth medium in a fermenter with immobilized Trichosporon cutaneum in which a 84% bioconversion was achieved. The reduced values of furfural remained constant even after 10-fold transformation.     

Furfural, 5-hydroxymethyl furfural, and acetoin act as external electron acceptors during anaerobic fermentation of xylose in recombinant Saccharomyces cerevisiae

The electron acceptors acetoin, acetaldehyde, furfural, and 5-hydroxymethylfurfural (HMF) were added to anaerobic batch fermentation of xylose by recombinant, xylose utilising Saccharomyces cerevisiae TMB 3001. The intracellular fluxes during xylose fermentation before and after acetoin addition were calculated with metabolic flux analysis. Acetoin halted xylitol excretion and decreased the flux through the oxidative pentose phosphate pathway. The yield of ethanol increased from 0.62 mol ethanol/mol xylose to 1.35 mol ethanol/mol xylose, and the cell more than doubled its specific ATP production after acetoin addition compared to fermentation of xylose only. This did, however, not result in biomass growth. The xylitol excretion was also decreased by furfural and acetaldehyde but was unchanged by HMF. Thus, furfural present in lignocellulosic hydrolysate can be beneficial for ethanolic fermentation of xylose. Enzymatic analyses showed that the reduction of acetoin and furfural required NADH, whereas the reduction of HMF required NADPH. The enzymatic activity responsible for furfural reduction was considerably higher than for HMF reduction and also in situ furfural conversion was higher than HMF conversion.