Molecular weight and pH effects of aminoethyl modified chitosan on antibacterial activity in vitro

Aminoethyl modified chitosan derivatives (AEMCSs) with different molecular weight (Mw) were synthesized by grafting aminoethyl group on different molecular weight chitosans and chitooligosaccharide. FTIR, (1)H NMR, (13)C NMR, elemental analysis and potentiometric titration results showed that branched polyethylimine chitosan was synthesized. Clinical Laboratory Standard Institute (CLSI) protocols were used to determine MIC for Gram-negative strain of Escherichia coli under different pH. The antibacterial activity of the derivatives was significantly improved compared with original chitosans, with MIC values against E. coli varying from 4 to 64 μg/mL depending on different Mw and pH. High molecular weight seems to be in favor of stronger antibacterial activity. At pH 7.4, derivatives with Mw above 27 kDa exhibited equivalent antibacterial activity (16 μg/mL), while oligosaccharide chitosan derivative with lower Mw (~1.4 kDa) showed decreased MIC of 64 μg/mL. The effect of pH on antibacterial activity is more complicated. An optimal pH for HAEMCS was found around 6.5 to give MIC as low as 4 μg/mL, while higher or lower pH compromised the activity. Cell integrity assay and SEM images showed evident cell disruption, indicating membrane disruption may be one possible mechanism for antibacterial activity.     

Influence of chitosan type on the properties of extruded pellets with low amount of microcrystalline cellulose

The purpose of this research was to study the influence of type of chitosan with different molecular weights, ie, 190 and 419 kDa, on properties of pellets prepared by extrusion/ spheronization. The formulations, consisting of acetaminophen as model drug, chitosan, microcrystalline cellulose (MCC), and dibasic calcium phosphate dihydrate with/without sodium alginate, were extruded using a twin-screw extruder and water as the granulating liquid. With 30% wt/wt MCC and no added sodium alginate, spherical pellets were produced containing low and high molecular weight chitosan at a maximum amount of 60% and 40% wt/wt, respectively. With sodium alginate (2.5% wt/wt), pellets with either type of chitosan (60% wt/wt), MCC (17.5% wt/wt), and acetaminophen (20% wt/wt) could be produced indicating an improved pelletforming ability. Type and amount of chitosan and added sodium alginate affected physical properties of pellets including size, roundness, crushing force, and drug release. Low molecular weight chitosan produced pellets with higher mean diameter, sphericity, and crushing force. Additionally, the pellets made of low molecular weight chitosan and added sodium alginate showed faster drug release in 0.1 N HCl but had slower drug release in pH 7.4 phosphate buffer. This indicated that drug release from pellets could be modified by the molecular weight of chitosan. In conclusion, the molecular weight of chitosan had a major influence on formation, physical properties, and drug release from the obtained pellets. Published: August 10, 2007     

Preparation of aspirin and probucol in combination loaded chitosan nanoparticles and in vitro release study

We design and develop chitosan nanoparticles which load two different drugs simultaneously. Aspirin (acetylsalicylic acid, ASA), a hydrophilic drug and probucol (PRO), a hydrophobic drug, are chosen as typical drugs, which are widely used to treat restenosis. The drug loaded chitosan nanoparticles are prepared by gelation of chitosan with tripolyphosphate (TPP) by ionic cross-linking. The physicochemical properties of nanoparticles are investigated by FTIR, transmission electron microscope (TEM), scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). The images show that these particles are spherical in shape with ASA being in the amorphous phase, while PRO is crystalline. The properties of chitosan nanoparticles such as encapsulation capacity and controlled release behaviors of ASA and PRO are evaluated. Experimental results indicate that the loading capacity (LC), encapsulation efficiency (EE) and ASA and PRO release behaviors are affected by several factors including pH, concentration of TPP, chitosan molecular weight (MW) and ASA initial concentration as well as PRO. In vitro release shows that the nanoparticles provide a continuous release. Entrapped ASA is released for more than 24 h and PRO lasts longer for 120 h.     

Dextran retention in the rat brain following release from a polymer implant.

Intracranial controlled release polymers may improve drug administration to the brain, where therapy is frequently limited due to the low permeability of brain capillaries to therapeutic agents. On the basis of drug transport and elimination rates, we proposed that high molecular weight, water-soluble molecules would be retained in the brain space following release from an intracranial implant. To test this hypothesis, solid particles of different molecular weight fractions of fluorescein isothiocyanate labeled dextran (FITC-dextran; 4 x 10(3) Da (4 kDa) < weight-averaged molecular weight (Mw) < 150 kDa) or fluorescein were uniformly dispersed in matrices of a polyanhydride copolymer synthesized from a fatty acid dimer and sebacic acid in a 50:50 ratio, P(FAD:SA). When incubated in buffered saline, FITC-dextran fractions of 70 kDa Mw were released from the polymer within 48 h; 4 kDa Mw FITC-dextran and fluorescein were released more slowly. Following implantation of P(FAD:SA) matrices containing either 70 kDa Mw FITC-dextran, 4 kDa Mw FITC-dextran, or fluorescein into the brains of normal rats, fluorescent tracers were continuously released into the brain tissue for 30 days. Tracer concentrations within the brain were significantly higher for large molecular weight tracers (70 kDa Mw FITC-dextran > 4 kDa Mw FITC-dextran > fluorescein). The rate of elimination, kapp, of each tracer from the brain was determined by comparing experimental data with a model describing tracer diffusion/elimination in the brain extracellular space; kapp decreased with increasing molecular weight (fluorescein > 4 kDa Mw FITC-dextran > 70 kDa Mw FITC-dextran).     

Chitosan microcapsules loaded with either miconazole nitrate or clotrimazole,prepared via emulsion technique

In this paper, a simple and versatile coacervation technique has been developed by using an ultrasound-assisted oil/water emulsion method for the preparation of antifungal agent-loaded microcapsules. Two types of chitosan microcapsules are successfully prepared. The mean particle size of the chitosan/miconazole nitrate microcapsules is 2.6 μm and that of the chitosan/clotrimazole microcapsules is 4.1 μm. The encapsulation efficiency of the chitosan/miconazole nitrate microcapsules (77.58–96.81%) is relatively higher than that of the chitosan/clotrimazole microcapsules (56.66–93.82%). The in vitro drug release performance of the microcapsules shows that the chitosan/miconazole nitrate microcapsules release about 49.5% of the drug while chitosan/clotrimazole microcapsules release more than 66.1% of the drug after 12 h under a pressure of 5 kg at pH 5.5, which is similar to the pH of human skin. The prepared drug-loaded microcapsules could be applied onto bandages or socks, and will continuously release antifungal drugs in a controlled manner under pressure.     

Swelling behavior and controlled release of theophylline and sulfamethoxazole drugs in beta-lactoglobulin protein gels obtained by phase separation in water/ethanol mixture

Physically cross-linked beta-lactoglobulin (BLG) protein gels containing theophylline and sulfamethoxazole low molecular weight drugs were prepared in 50% ethanol solution at pH 8 and two protein concentrations (6 and 7% (w/v)). Swelling behavior of cylindrical gels showed that, irrespective of the hydrated or dehydrated state of the gel, the rate of swelling was the highest in water. When the gels were exposed to water, they first showed a swelling phase in which their weight increased 3 and 30 times for hydrated and dehydrated gels, respectively, due to absorption of water, followed by a dissolution phase. The absorption of solvent was however considerably reduced when the gels were exposed to aqueous buffer solutions. The release behavior of both theophylline and sulfamethoxazole drugs from BLG gels was achieved in a time window ranging from 6 to 24 h. The drug release depended mainly on the solubility of the drugs and the physical state of the gel (hydrated or dry form). Analysis of drug release profiles using the model of Peppas showed that diffusion through hydrated gels was governed by a Fickian process whereas diffusion through dehydrated gels was governed partly by the swelling capacities of the gel but also by the structural rearrangements inside the network occurring during dehydration step. By a judicious selection of protein concentration, hydrated or dehydrated gel state, drug release may be modulated to be engineered suitable for pharmaceutical as well as cosmetics and food applications.     

Preparation of low molecular weight N-maleated chitosan-graft-PAMAM copolymer for enhanced DNA complexation

Low molecular weight N-maleated chitosan-graft-PAMAM (polyamidoamine) copolymer was prepared through N-maleated chitosan (NMC) by Michael type addition reaction to enhance its solubility in water as well as its cationic character for enhancement of DNA complexation. FTIR, (1)H NMR, XRD and GPC were used to characterize the graft copolymers. The copolymer showed better DNA complexation ability at low N/P ratio than that of chitosan due to increased surface charge density by the incorporation of PAMAM molecule on to chitosan backbone. The copolymer can effectively protect the DNA toward anionic surfactant. In vitro release study showed efficient DNA release occurred at physiological pH (pH 7.4). In vitro cell cytotoxicity test indicated toward less cytotoxicity of NMC-graft-PAMAM copolymers compared to that of 25kDa PEI. Thus, the synthesized NMC-graft-PAMAM copolymers have great potential of finding application in drug and gene delivery.     

Biodegradable chitosan matrix for the controlled release of steroids.

Chitosan, a polysaccharide, having structural characteristics similar to glycosaminoglycans, seems to be nontoxic and bioabsorbable. This study highlights the use of chitosan matrix for controlled drug delivery systems. The steroid drugs, namely testosterone, progesterone and beta-oestradiol were mixed with chitosan and the films were prepared by evaporation technique. The in vitro release profile of these steroids from the film matrix was monitored, as a function of time, in phosphate buffered saline (PBS, pH 7.4) at 37 degree C using a U-V-spectrophotometer. The degradation, of these chitosan and drug loaded chitosan films, was also investigated by weight loss and tensile strength studies. The steroid release from chitosan films was compared with the release of these drugs from their microbeads. It appears, the films and the microbeads stayed intact during the dissolution study of 90 days and the possibility of using these systems in contraceptive applications and novel drug delivery systems are discussed.     

壳聚糖基温敏水凝胶的研究进展

壳聚糖是一种由甲壳素脱乙酰化得到的氨基多糖,具有生物相容性、低细胞毒性和可生物降解性等特点。壳聚糖/β-甘油磷酸钠溶液温敏水凝胶在组织工程、药物缓释等领域多有报道,其成胶性能取决于凝胶的组分和浓度。针对单纯壳聚糖水凝胶强度较低、降解较快、药物突释等缺陷,通常对壳聚糖进行改性或引入新材料共混,获得更符合实际需要的壳聚糖基温敏水凝胶。对近年来壳聚糖基水凝胶的研究进展进行综述,包括改性壳聚糖、共混体系等,概述了其在组织工程(软骨、血管、神经修复)、药物缓释(癌症药物缓释、糖尿病治疗)领域中研究和应用的新进展,以期为后续温敏水凝胶的进一步研究提供参考。     

Chitosan derivatives alter release profiles of model compounds from calcium phosphate implants

The aim of the current study was to evaluate the impact of chitosan derivatives, namely N-octyl-chitosan and N-octyl-O-sulfate chitosan, incorporated in calcium phosphate implants to the release profiles of model drugs. The rate and extent of calcein (on M.W. 650 Da) ED, and FITC-dextran (M.W. 40 kDa) on in vitro release were monitored by fluorescence spectroscopy. Results show that calcein release is affected by the type of chitosan derivative used. A higher percentage of model drug was released when the hydrophilic polymer N-octyl-sulfated chitosan was present in the tablets compared with the tablets containing the hydrophobic polymer N-octyl-chitosan. The release profiles of calcein or FD from tablets containing N-octyl-O-sulfate revealed a complete release for FD after 120 h compared with calcein where 20% of the drug was released over the same time period. These results suggest that the difference in the release profiles observed from the implants is dependent on the molecular weight of the model drugs. These data indicate the potential of chitosan derivatives in controlling the release profile of active compounds from calcium phosphate implants.     

Synthesis of biocompatible,stimuli-responsive,physical gels based on ABA triblock copolymers

ABA triblock copolymers [A = 2-(diisopropylamino)ethyl methacrylate), DPA or 2-(diethylamino)ethyl methacrylate), DEA; B = 2-methacryloyloxyethyl phosphorylcholine, MPC] prepared using atom transfer radical polymerization dissolve in acidic solution but form biocompatible free-standing gels at around neutral pH in moderately concentrated aqueous solution (above approximately 10 w/v % copolymer). Proton NMR studies indicate that physical gelation occurs because the deprotonated outer DPA (or DEA) blocks become hydrophobic, which leads to attractive interactions between the chains: addition of acid leads to immediate dissolution of the micellar gel. Release studies using dipyridamole as a model hydrophobic drug indicate that sustained release profiles can be obtained from these gels under physiologically relevant conditions. More concentrated DPA-MPC-DPA gels give slower release profiles, as expected. At lower pH, fast, triggered release can also be achieved, because gel dissolution occurs under these conditions. Furthermore, the nature of the outer block also plays a role; the more hydrophobic DPA-MPC-DPA triblock gels are formed at lower copolymer concentrations and retain the drug longer than the DEA-MPC-DEA triblock gels.     

Comparison in antioxidant action between α-chitosan and β-chitosan at a wide range of molecular weight and chitosan concentration

Antioxidant activity in α- and β-chitosan at a wide range of molecular weight (Mw) and chitosan concentration (CS) was determined by 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity, reducing ability, chelating ability, and hydroxyl radical scavenging activity. The form of chitosan (FC) had significant (P <0.05) effect on all measurements except DPPH radical scavenging activity, and antioxidant activity was dependent on Mw and CS. High Mw (280–300 kDa) of β-chitosan had extremely lower half maximal effective concentrations (EC₅₀) than α-chitosan in DPPH radical scavenging activity and reducing ability. The 22–30 kDa of α- and β-chitosan showed significantly (P <0.05) higher activities in DPPH radical scavenging, reducing ability, and hydroxyl radical scavenging than samples at other Mw, while chelating ability was the highest in 4–5 kDa chitosan. CS had significant effect on all measurements and the effect was related to Mw. The antioxidant activity of 280–300 kDa chitosan was affected by coil-overlap concentrations (C¹) in the CS range of 4–10 mg/mL, forming entanglements. Reducing ability and hydroxyl radical scavenging activity were more predominant action in antioxidant activity of chitosan as shown by the lower EC₅₀ values than those in other antioxidant measurements.     

Synthesis and characterization of pH-sensitive hydrogel composed of carboxymethyl chitosan for colon targeted delivery of ornidazole

In the present study, carboxymethyl chitosan was prepared from chitosan, crosslinked with glutaraldehyde and evaluated in vitro as a potential carrier for colon targeted drug delivery of ornidazole. Ornidazole was incorporated at the time of crosslinking of carboxymethyl chitosan. The chitosan was evaluated for its degree of deacetylation (DD) and average molecular weight; which were found to be 84.6% and 3.5×10(4) Da, respectively. The degree of substitution on prepared carboxymethyl chitosan was found to be 0.68. All hydrogel formulations showed more than 85% and 74% yield and drug loading, respectively. The swelling behaviour of prepared hydrogels checked in different pH values, 1.2, 6.8 and 7.4, indicated pH responsive swelling characteristic with very less swelling at pH 1.2 and quick swelling at pH 6.8 followed by linear swelling at pH 7.4 with slight increase. In vitro release profile was carried out at the same conditions as in swelling and drug release was found to be dependant on swelling of hydrogels and showed biphasic release pattern with non-fickian diffusion kinetics at higher pH. The carboxymethylation of chitosan, entrapment of drug and its interaction in prepared hydrogels were checked by FTIR, (1)H NMR, DSC and p-XRD studies, which confirmed formation of carboxymethyl chitosan from chitosan and absence of any significant chemical change in ornidazole after being entrapped in crosslinked hydrogel formulations. The surface morphology of formulation S6 checked before and after dissolution, revealed open channel like pores formation after dissolution.     

壳聚糖作为药物缓释控释载体的研究进展

壳聚糖因其具有良好的生物学特性而成为多种药物载体研究的热点。药物经过壳聚糖负载后,不仅能够达到缓释控释的目的,还能够改变药物的给药方式,以此减少给药次数,降低药物不良反应,提高药物生物利用度。本文就壳聚糖和改性壳聚糖作为普通药物和生物大分子药物载体的研究进展作一综述。     

Chitosan-Modified PLGA Nanoparticles with Versatile Surface for Improved Drug Delivery

Shortage of functional groups on surface of poly(lactide-co-glycolide) (PLGA)-based drug delivery carriers always hampers its wide applications such as passive targeting and conjugation with targeting molecules. In this research, PLGA nanoparticles were modified with chitosan through physical adsorption and chemical binding methods. The surface charges were regulated by altering pH value in chitosan solutions. After the introduction of chitosan, zeta potential of the PLGA nanoparticle surface changed from negative charge to positive one, making the drug carriers more affinity to cancer cells. Functional groups were compared between PLGA nanoparticles and chitosan-modified PLGA nanoparticles. Amine groups were exhibited on PLGA nanoparticle surface after the chitosan modification as confirmed by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The modified nanoparticles showed an initial burst release followed by a moderate and sustained release profile. Higher percentage of drugs from cumulative release can be achieved in the same prolonged time range. Therefore, PLGA nanoparticles modified by chitosan showed versatility of surface and a possible improvement in the efficacy of current PLGA-based drug delivery system.     

Effect of Drying Methods on Swelling,Erosion and Drug Release from Chitosan–Naproxen Sodium Complexes

The purpose of this research was to explore theapplication of ionic interactions between naproxen sodium (NS) and chitosan (CH) in complexes (NSC) prepared by tray drying (TD) and spray drying (SD) methods. Drug–polymer ratio (1:1) in the NSC was optimized on the basis of dialysis studies. The particulate systems of NSC were prepared by tray drying (TD) and spray drying (SD) methods. Release retarding polymers were added to the NSC and to the physical mixtures containing NS–CH and their effects on water uptake, matrix erosion and drug release at different pH were compared. Spray dried complexes (SDC) were spherical, free flowing, light and fine amorphous particles in contrast to the crystalline, hard, tenacious, irregularly shaped, denser tray dried complexes (TDC) with poor flowability. Differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and Fourier transform infrared (FTIR) patterns confirm the conversion of crystalline to high energy amorphous phase suitable for ionic interactions in NSC. Presence of release retarding polymers, kappa carrageenan and hydroxypropylmethylcellulose (HPMC) in the NSC compacts retarded the drug release and improved the matrix integrity. Carrageenan matrices exhibited more retardation than HPMC tablets. FTIR patterns, erosion, swelling and drug release from matrices support ionic interactions between NS and CH in NSC. The reasons for retarded drug release from the chitosan matrices at acidic pH include poor solubility of drug at acidic pH, formation of a rate limiting polymer gel barrier along the periphery of matrices and the ionic interactions between oppositely charged moieties.     

Preparation and characterization of chitosans carrying aldehyde functions generated by nitrogen oxides

In this work, aldehyde-functionalized chitosan is produced by the reaction of chitosan with nitrogen oxides generated in situ from a HNO₃/H₃PO₄-NaNO₂ mixture. This method is more advantageous than the existing approaches, since the depolymerization is slower and the purification process is straightforward. The appearance of characteristic peaks in the Fourier transform infrared and carbon-13 nuclear magnetic resonance spectra (1733 cm⁻¹ and 183.4 ppm, respectively) of the product confirms the presence of the aldehyde functionality in the modified chitosans. The ¹H NMR spectra also revealed the presence of aldehyde groups. Furthermore, the gradual disappearance of the peaks due to aldehyde protons and a concomitant appearance of a new resonance at ∼8.05 ppm with increasing pH indicate the formation of Schiff's base between the aldehyde and the free amine groups. The aldehyde-functionalized chitosan prepared with 6 h of reaction time (chitosan-6h) forms a gel in situ without any added external crosslinker and it may potentially be useful as a vehicle for drug delivery.     

Lipophilic cationic drugs increase the permeability of lysosomal membranes in a cell culture system

Lysosomes accumulate many drugs several fold higher compared to their extracellular concentration. This mechanism is believed to be responsible for many pharmacological effects. So far, uptake and release kinetics are largely unknown and interactions between concomitantly administered drugs often provoke mutual interference. In this study, we addressed these questions in a cell culture model. The molecular mechanism for lysosomal uptake kinetics was analyzed by live cell fluorescence microscopy in SY5Y cells using four drugs (amantadine, amitriptyline, cinnarizine, flavoxate) with different physicochemical properties. Drugs with higher lipophilicity accumulated more extensively within lysosomes, whereas a higher pK_a value was associated with a more rapid uptake. The drug‐induced displacement of LysoTracker was neither caused by elevation of intra‐lysosomal pH, nor by increased lysosomal volume. We extended our previously developed numerical single cell model by introducing a dynamic feedback mechanism. The empirical data were in good agreement with the results obtained from the numerical model. The experimental data and results from the numerical model lead to the conclusion that intra‐lysosomal accumulation of lipophilic xenobiotics enhances lysosomal membrane permeability. Manipulation of lysosomal membrane permeability might be useful to overcome, for example, multi‐drug resistance by altering subcellular drug distribution. J. Cell. Physiol. 224:152–164, 2010 © 2010 Wiley‐Liss, Inc.     

The Effects of pH and Intraliposomal Buffer Strength on the Rate of Liposome Content Release and Intracellular Drug Delivery

Targeted liposomal drug formulations may enter cells by receptor-mediated endocytosis and then traffick by membrane flow into acidic intracellular compartments. In order to understand the impact of these intracellular pH changes on liposomal drug unloading, the effect of pH on the release from folate-targeted liposomes of three model compounds with distinct pH dependencies was examined. 5(6)-carboxyfluorescein, which titrates from its anionic to uncharged form following internalization by KB cells, displays strong endocytosis-dependent release, since only its uncharged (endosomal) form is membrane permeable. Endocytosis-triggered unloading of drugs of this sort is enhanced by encapsulating the drug in a weak buffer at neutral pH, so that acidification of the intraliposomal compartment following cellular uptake can occur rapidly. Sulforhodamine B, in contrast, retains both anionic and cationic charges at endosomal pH (~pH 5), and consequently, escapes the endosomes only very slowly. Doxorubicin, which is commonly loaded into liposomes in its membrane-impermeable (cationic) form using an acidic buffer, still displays endocytosis-triggered unloading, since sufficient uncharged doxorubicin remains at endosomal pHs to allow rapid re-equilibration of the drug according to the new proton gradient across the membrane. In this case, when the extraliposomal [H⁺] increases 250-fold from 4 × 10^–8 M (pH 7.4, outside the cell) to 10^–5 M (pH 5, inside the endosome), the ratio of doxorubicin inside to outside the liposome must decrease by a factor of 250. Therefore, the collapse of the transliposomal pH gradient indirectly drives an efflux of the drug molecule from the liposome. Since a change in intraliposomal pH is not required to unload drugs of this type, the intraliposomal compartment can be buffered strongly at acidic pH to prevent premature release of the drug outside the cell. In summary, pH triggered release of liposome-encapsulated drugs can be achieved both with drugs that increase as well as decrease their membrane permeabilities upon acidification, as long as the intraliposomal buffer strength and pH is rationally selected.     

Chitosan and lactic acid-grafted chitosan nanoparticles as carriers for prolonged drug delivery

Nanoparticles of approximately 10nm in diameter made with chitosan or lactic acid-grafted chitosan were developed for high drug loading and prolonged drug release. A drug encapsulation efficiency of 92% and a release rate of 28% from chitosan nanoparticles over a 4-week period were demonstrated with bovine serum protein. To further increase drug encapsulation, prolong drug release, and increase chitosan solubility in solution of neutral pH, chitosan was modified with lactic acid by grafting D,L-lactic acid onto amino groups in chitosan without using a catalyst. The lactic acid-grafted chitosan nanoparticles demonstrated a drug encapsulation efficiency of 96% and a protein release rate of 15% over 4 weeks. With increased protein concentration, the drug encapsulation efficiency decreased and drug release rate increased. Unlike chitosan, which is generally soluble only in acid solution, the chitosan modified with lactic acid can be prepared from solutions of neutral pH, offering an additional advantage of allowing proteins or drugs to be uniformly incorporated in the matrix structure with minimal or no denaturization.