Derivation of the Stress-Strain Behavior of the constituents of Bio-Inspired Layered TiO₂/PE-Nanocomposites by Inverse Modeling Based on FE-Simulations of Nanoindentation Test

Owing to the apparent simple morphology and peculiar properties, nacre, an iridescent layer, coating of the inner part of mollusk shells, has attracted considerable attention of biologists, material scientists and engineers. The basic structural motif in nacre is the assembly of oriented plate-like aragonite crystals with a ’brick’ (CaCO₃ crystals) and ’mortar’ (macromolecular components like proteins) organization. Many scientific researchers recognize that such structures are associated with the excellent mechanical properties of nacre and biomimetic strategies have been proposed to produce new layered nanocomposites. During the past years, increasing efforts have been devoted towards exploiting nacre’s structural design principle in the synthesis of novel nanocomposites. However, the direct transfer of nacre’s architecture to an artificial inorganic material has not been achieved yet. In the present contribution we report on laminated architecture, composed of the inorganic oxide (TiO₂) and organic polyelectrolyte (PE) layers which fulfill this task.
To get a better insight and understanding concerning the mechanical behaviour of bio-inspired layered materials consisting of oxide ceramics and organic layers, the elastic-plastic properties of titanium dioxide and organic polyelectrolyte phase are determined via FE-modelling of the nanoindentation process. With the use of inverse modeling and based on numerical models which are applied on the microscopic scale, the material properties of the constituents are derived.     

Rational Design of Advanced Thermoelectric Materials

Advanced thermoelectric technologies can drastically improve energy efficiencies of industrial infrastructures, solar cells, automobiles, aircrafts, etc. When a thermoelectric device is used as a solid‐state heat pump and/or as a power generator, its efficiency depends pivotally on three fundamental transport properties of materials, namely, the thermal conductivity, electrical conductivity, and thermopower. The development of advanced thermoelectric materials is very challenging because these transport properties are interrelated. This paper reviews the physical mechanisms that have led to recent material advances. Progresses in both inorganic and organic materials are summarized. While the majority of the contemporary effort has been focused on lowering the lattice thermal conductivity, the latest development in nanocomposites suggests that properly engineered interfaces are crucial for realizing the energy filtering effect and improving the power factor. We expect that the nanocomposite approach could be the focus of future materials breakthroughs.     

Biofouling effects on the performance of microbial fuel cells and recent advances in biotechnological and chemical strategies for mitigation

The occurrence of biofouling in MFC can cause severe problems such as hindering proton transfer and increasing the ohmic and charge transfer resistance of cathodes, which results in a rapid decline in performance of MFC. This is one of the main reasons why scaling-up of MFCs has not yet been successfully accomplished. The present review article is a wide-ranging attempt to provide insights to the biofouling mechanisms on surfaces of MFC, mainly on proton exchange membranes and cathodes, and their effects on performance of MFC based on theoretical and practical evidence. Various biofouling mitigation techniques for membranes are discussed, including preparation of antifouling composite membranes, modification of the physical and chemical properties of existing membranes, and coating with antifouling agents. For cathodes of MFC, use of Ag nanoparticles, Ag-based composite nanoparticles, and antifouling chemicals is outlined in considerable detail. Finally, prospective techniques for mitigation of biofouling are discussed, which have not been given much previous attention in the field of MFC research. This article will help to enhance understanding of the severity of biofouling issues in MFCs and provides up-to-date solutions. It will be beneficial for scientific communities for further strengthening MFC research and will also help in progressing this cutting-edge technology to scale-up, using the most efficient methods as described here.     

Silicon-based microfabricated microbial fuel cell toxicity sensor

Microbial fuel cells (MFCs) have been used for several years as biosensors for measuring environmental parameters such as biochemical oxygen demand and water toxicity. The present study is focused on the detection of toxic matter using a novel silicon-based MFC. Like other existing toxicity sensors based on MFCs, this device is capable of detecting the variation on the current produced by the cell when toxic compounds are present in the medium. The MFC approach presented in this work aims to obtain a simple, compact and planar device for its further application as a biosensor in the design and fabrication of equipment for toxicity monitoring. It consists on a proton exchange membrane placed between two microfabricated silicon plates that act as current collectors. An array of square 80 μm × 80 μm vertical channels, 300 μm deep, have been defined trough the plates over an area of 6 mm × 6 mm. The final testing assembly incorporates two perspex pieces positioned onto the plates as reservoirs with a working volume of 144 μL per compartment. The operation of the microdevice as a direct electron transfer MFC has been validated by comparing its performance against a larger scale MFC, run under the same conditions. The device has been tested as a toxicity sensor by setting it at a fixed current while monitoring changes in the output power. A drop in the power production is observed when a toxic compound is added to the anode compartment. The compact design of the device makes it suitable for its incorporation into measurement equipment either as an individual device or as an array of sensors for high throughput processing.     

Prion-based nanomaterials and their emerging applications

ABSTRACT

Protein misfolding and aggregation into highly ordered fibrillar structures have been traditionally associated with pathological processes. Nevertheless, nature has taken advantage of the particular properties of amyloids for functional purposes, like in the protection of organisms against environmental changing conditions. Over the last decades, these fibrillar structures have inspired the design of new nanomaterials with intriguing applications in biomedicine and nanotechnology such as tissue engineering, drug delivery, adhesive materials, biodegradable nanocomposites, nanowires or biosensors. Prion and prion-like proteins, which are considered a subclass of amyloids, are becoming ideal candidates for the design of new and tunable nanomaterials. In this review, we discuss the particular properties of this kind of proteins, and the current advances on the design of new materials based on prion sequences.     

Novel biobased nanocomposites from soybean oil and functionalized organoclay

Novel biobased nanocomposites have been prepared by the cationic polymerization of conjugated soybean oil (CSOY) or conjugated LoSatSoy oil (CLS) with styrene (ST) and divinylbenzene (DVB), and a reactive organomodified montmorillonite (VMMT) clay as a reinforcing phase. This filler has been prepared by the cationic exchange of sodium montmorillonite with (4-vinylbenzyl)triethylammonium chloride in aqueous solution. The nanostructures of the nanocomposites have been determined by using wide-angle X-ray diffraction (WAXD) and transmission electron microscopy (TEM), respectively. The results from WAXD and TEM indicate that a heterogeneous structure consisting of intercalation and partial exfoliation or an intercalation structure exists in the nanocomposites, depending on the amount of VMMT in the polymer matrix. The thermal, mechanical, and organic vapor barrier properties of the nanocomposites have been evaluated by dynamic thermal analysis, thermogravimetric analysis, mechanical testing, and toluene absorption. A significant improvement is observed in the thermal stability, the dynamic bending storage modulus, the compressive modulus, the compressive strength, the compressive strain at failure, and the vapor barrier performance for the CSOY-- and CLS-based nanocomposites with 1-2 wt % VMMT loading, where some individual exfoliated silicate platelets occur. For example, the CLS-based nanocomposite with 1-2 wt % VMMT exhibits increases of 100-128%, 86-92%, and 5-7% in compressive modulus, compressive strength, and compressive strain at failure, respectively. CLS with higher unsaturation and reactivity affords nanocomposites with higher thermal stability and higher mechanical properties than CSOY.     

Microbial fuel cells as an alternative energy source: current status

Microbial fuel cell (MFC) technology is an emerging area for alternative renewable energy generation and it offers additional opportunities for environmental bioremediation. Recent scientific studies have focused on MFC reactor design as well as reactor operations to increase energy output. The advancement in alternative MFC models and their performance in recent years reflect the interests of scientific community to exploit this technology for wider practical applications and environmental benefit. This is reflected in the diversity of the substrates available for use in MFCs at an economically viable level. This review provides an overview of the commonly used MFC designs and materials along with the basic operating parameters that have been developed in recent years. Still, many limitations and challenges exist for MFC development that needs to be further addressed to make them economically feasible for general use. These include continued improvements in fuel cell design and efficiency as well scale-up with economically practical applications tailored to local needs.     

Utilization of Illinois PCC Dry Bottom Ash for Compacted Landfill Barriers

Compacted soil barriers are one of the most important components of municipal waste landfills. The material used to construct a landfill liner and/or cap must prevent the flow of fluids through them. Soils with low values of permeability (such as compacted clays) are often used to construct landfill barriers. Natural sands and other cohesionless materials are used to construct hydraulic barriers by adding admixtures to modify their properties. Several studies have been conducted that dealt with determining geotechnical engineering properties of sand-bentonite mixtures. Pulverized coal combustion (PCC) dry bottom ash is a coal combustion by-product of burning coal to produce electricity. Because of the increasing costs associated with the disposal of bottom ash and the environmental regulations in place, there is a need to develop alternate methods for profitable and environmentally safe uses of this waste material. Most scientists and researchers have concluded that bottom ash has geotechnical characteristics similar to those of sands. However, information on the use of bottom ash, with or without admixtures, in the construction of landfill barriers is limited. Most of the available literature on the engineering properties of bottom ash deals with its use as a fill material. The physical and chemical characteristics of bottom ash depend on several factors including type of coal used and type of boiler and collection system. This paper presents the results of an experimental study conducted to determine the possible use of Illinois PCC dry bottom ash amended with bentonite to construct landfill barriers. Test results presented show that the average value of hydraulic conductivity of Illinois PCC dry bottom ash with 15% bentonite content is close to the acceptable value required for its use as hydraulic barrier. Therefore, it was concluded that Illinois PCC dry bottom ash, modified with 15% or higher bentonite content, is likely to provide adequate hydraulic conductivity for its use to construct landfill barriers.     

Recent progress in electrodes for microbial fuel cells

The performance and cost of electrodes are the most important aspects in the design of microbial fuel cell (MFC) reactors. A wide range of electrode materials and configurations have been tested and developed in recent years to improve MFC performance and lower material cost. As well, anodic electrode surface modifications have been widely used to improve bacterial adhesion and electron transfer from bacteria to the electrode surface. In this paper, a review of recent advances in electrode material and a configuration of both the anode and cathode in MFCs are provided. The advantages and drawbacks of these electrodes, in terms of their conductivity, surface properties, biocompatibility, and cost are analyzed, and the modification methods for the anodic electrode are summarized. Finally, to achieve improvements and the commercial use of MFCs, the challenges and prospects of future electrode development are briefly discussed.     

Effect of conductive polymers coated anode on the performance of microbial fuel cells (MFCs) and its biodiversity analysis

Conductive polymer, one of the most attractive electrode materials, has been applied to coat anode of MFC to improve its performance recently. In this paper, two conductive polymer materials, polyaniline (PANI) and poly(aniline-co-o-aminophenol) (PAOA) were used to modify carbon felt anode and physical and chemical properties of the modified anodes were studied. The power output and biodiversity of modified anodes, along with unmodified carbon anode were compared in two-chamber MFCs. Results showed that the maximum power density of PANI and PAOA MFC could reach 27.4 mW/m(2) and 23.8 mW/m(2), comparing with unmodified MFC, increased by 35% and 18% separately. Low temperature caused greatly decrease of the maximum voltage by 70% and reduced the sorts of bacteria on anodes in the three MFCs. Anode biofilm analysis showed different bacteria enrichment: a larger mount of bacteria and higher biodiversity were found on the two modified anodes than on the unmodified one. For PANI anode, the two predominant bacteria were phylogenetically closely related to Hippea maritima and an uncultured clone MEC_Bicarb_Ac-008; for PAOA, Clostridiales showed more enrichment. Compare PAOA with PANI, the former introduced phenolic hydroxyl group by copolymerization o-aminophenol with aniline, which led to a different microbial community and the mechanism of group effect was proposed.     

普鲁士蓝纳米粒子在生物医学诊断和治疗中的应用及进展

随着生物医学诊断和治疗的持续深入研究,出现了多种医学诊断和治疗新方法,为人类的健康提供了更大的保证,其中纳米生物技术在生物医学诊断和治疗中的应用日益增多,基于纳米技术,开发传统材料的生物医学新应用成为了人们的研究热点。普鲁士蓝是一种历史悠久的蓝色染料,其制备过程简单、绿色、成本低,化学结构稳定,具有优良的物理、化学、光学以及磁性等性能,已经在许多领域得到了广泛的应用。近年来,普鲁士蓝开始在生物医学诊断和治疗领域中崭露头角,它已经成功的被开发为新型的核磁共振造影剂和光声成像造影剂,并且在药物输送系统和光热治疗等领域也开始占有一席之地,开发基于纳米技术的普鲁士蓝的生物医学应用已经成为极具吸引力的研究方向。本文对普鲁士蓝在生物医学诊断和治疗中的应用及进展进行综述。     

Molecular interactions of MnO2@RGO (manganese dioxide-reduced graphene oxide) nanocomposites with bovine serum albumin

Abstract

Graphene based materials have attracted global attention due to their excellent properties. GO-metal oxide nanocomposites have been conjugated with biomolecules for the development of novel materials and potentially used as biomarkers. Herein, a detailed study on the interaction of Bovine serum albumin (BSA) with MnO₂@RGO (manganese dioxide-reduced graphene oxide) nanocomposites (NC) has been carried out. MnO₂@RGO nanocomposites were prepared through a template/surfactant free hydrothermal route at 180?°C for 12?h by varying the graphene oxide (GO) concentration. Different biophysical experiments have been carried out to evaluate molecular interactions between BSA and NCs. Intrinsic fluorescence has been used to quantify the quenching efficiency of NCs and the binding association of BSA-NC complexes. NCs effectively quenched the intrinsic fluorescence of BSA via static and dynamic mechanism. Further, the results indicate that the molecular interactions of NC with BSA are dependent on the GO percentage in NC. Circular dichroism results demonstrate nominal changes in the secondary structure of BSA in presence of NCs. Also, the esterase-like activity of BSA was marginally affected after adsorption upon NCs. In addition, the FESEM micrographs reveal that the protein-NC complexes consist of nanorod and sheet-like morphologies are forming aggregates of different sizes. We hope that this study will provide a basis for the design of novel graphene based and other related nanomaterials for several biological applications.

Communicated by Ramaswamy H. Sarma     

A state of the art review on microbial fuel cells: A promising technology for wastewater treatment and bioenergy

A microbial fuel cell (MFC) is a bioreactor that converts chemical energy in the chemical bonds in organic compounds to electrical energy through catalytic reactions of microorganisms under anaerobic conditions. It has been known for many years that it is possible to generate electricity directly by using bacteria to break down organic substrates. The recent energy crisis has reinvigorated interests in MFCs among academic researchers as a way to generate electric power or hydrogen from biomass without a net carbon emission into the ecosystem. MFCs can also be used in wastewater treatment facilities to break down organic matters. They have also been studied for applications as biosensors such as sensors for biological oxygen demand monitoring. Power output and Coulombic efficiency are significantly affected by the types of microbe in the anodic chamber of an MFC, configuration of the MFC and operating conditions. Currently, real-world applications of MFCs are limited because of their low power density level of several thousand mW/m2. Efforts are being made to improve the performance and reduce the construction and operating costs of MFCs. This article presents a critical review on the recent advances in MFC research with emphases on MFC configurations and performances.     

Enhanced Cathodic Oxygen Reduction and Power Production of Microbial Fuel Cell Based on Noble‐Metal‐Free Electrocatalyst Derived from Metal‐Organic Frameworks

Microbial fuel cell (MFC) can generate electricity from organic substances based on anodic electrochemically active microorganisms and cathodic oxygen reduction reaction (ORR), thus exhibiting promising potential for harvesting electric energy from organic wastewater. The ORR performance is crucial to both power production efficiency and overall cost of MFC. A new type of metal‐organic‐framework‐derived electrocatalysts containing cobalt and nitrogen‐doped carbon (CoNC) is developed, which is effective to enhance activity, selectivity, and stability toward four‐electron ORR in pH‐neutral electrolyte. When glucose is used as the substrate, the maximum power density of 1665 mW m^?2 is achieved for the optimized CoNC pyrolyzed at 900 °C, which is 39.8% higher than that of 1191 mW m^?2 for commercial Pt/C catalyst in the single‐chamber MFC. The improved performance of CoNC catalyst can be attributed to large surface area, microporous nature, and the involvement of nitrogen‐coordinated cobalt species. These properties enable the efficient ORR by increasing the active sites and enhancing mass transfer of oxygen and protons at “water‐flooding” three‐phase boundary where ORR occurs. This work provides a proof‐of‐concept demonstration of a noble‐metal‐free high‐efficiency and cost‐effective ORR electrocatalyst for effective recovery of electricity from biomass materials and organic wastewater in MFC.     

Experimental Investigation of Mechanical and Thermal Properties of Silica Nanoparticle-Reinforced Poly(acrylamide) Nanocomposite Hydrogels

Current studies investigating properties of nanoparticle-reinforced polymers have shown that nanocomposites often exhibit improved properties compared to neat polymers. However, over two decades of research, using both experimental studies and modeling analyses, has not fully elucidated the mechanistic underpinnings behind these enhancements. Moreover, few studies have focused on developing an understanding among two or more polymer properties affected by incorporation of nanomaterials. In our study, we investigated the elastic and thermal properties of poly(acrylamide) hydrogels containing silica nanoparticles. Both nanoparticle concentration and size affected hydrogel properties, with similar trends in enhancements observed for elastic modulus and thermal diffusivity. We also observed significantly lower swellability for hydrogel nanocomposites relative to neat hydrogels, consistent with previous work suggesting that nanoparticles can mediate pseudo crosslinking within polymer networks. Collectively, these results indicate the ability to develop next-generation composite materials with enhanced mechanical and thermal properties by increasing the average crosslinking density using nanoparticles.     

The role of spatial and ontogenetic morphological variation in the expansion of the geographic range of the tropical brown alga, Turbinaria ornata

Like many reefs worldwide, reefs in French Polynesia are experiencing a shift from coral-dominated to algal-dominated systems. The macroalga Turbinaria ornata comprises the majority of the increasing algal biomass on the barrier reefs surrounding these islands, and its distribution is increasing throughout this region. Aspects of the ecomorphology of Turbinaria make it ideally suited to thrive under the physical conditions found across barrier reefs throughout French Polynesia. Spatial morphological variation allows Turbinaria to produce morphotypes that are suited either to the calm, unidirectional, slowly flowing water in the backreef or to the high-energy wave-driven flow of the forereef. Backreef plants are flexible and produce airbladders that make them buoyant, whereas forereef plants are not buoyant, but strong and stiff. Production of bladders and resulting buoyancy has been found to be a phenotypically plastic trait in response to movement of water and confers advantages to backreef plants and plays an important role in dispersal. Ontogenetic variation of buoyancy, material properties, and reproductive capacity is part of a dispersal strategy whereby fertile, buoyant fronds drift between oceanic islands and form new populations, thereby contributing to the recent expansion of range of T. ornata across French Polynesia.     

On the elastic properties of single-walled carbon nanotubes/poly(ethylene oxide) nanocomposites using molecular dynamics simulations

Molecular dynamics simulations are used to study the physical and mechanical properties of single-walled carbon nanotubes/poly(ethylene oxide) nanocomposites. The effects of nanotube atomic structure, diameter, and volume fraction on the polymer density distribution, polymer atom distribution, stress–strain curves of nanocomposites and Young’s, and shear moduli of single-walled carbon nanotubes/poly(ethylene oxide) nanocomposites are explored. It is shown that the density of polymer, surrounding the nanotube surface, has a peak near the nanotube surface. However, increasing distance leads to dropping it to the value near the density of pure polymer. It is seen that for armchair nanotubes, the average polymer atoms distances from the single-walled carbon nanotubes are larger than the polymer atom distance from zigzag nanotubes. It further is shown that zigzag nanotubes are better candidates to reinforce poly (ethylene oxide) than their armchair counterparts.     

Effective Young's modulus of bacterial and microfibrillated cellulose fibrils in fibrous networks

The deformation micromechanics of bacterial cellulose (BC) and microfibrillated cellulose (MFC) networks have been investigated using Raman spectroscopy. The Raman spectra of both BC and MFC networks exhibit a band initially located at ≈ 1095 cm(-1). We have used the intensity of this band as a function of rotation angle of the specimens to study the cellulose fibril orientation in BC and MFC networks. We have also used the change in this peak's wavenumber position with applied tensile deformation to probe the stress-transfer behavior of these cellulosic materials. The intensity of this Raman band did not change significantly with rotation angle, indicating an in-plane 2D network of fibrils with uniform random orientation; conversely, a highly oriented flax fiber exhibited a marked change in intensity with rotation angle. Experimental data and theoretical analysis shows that the Raman band shift rate arising from deformation of networks under tension is dependent on the angles between the axis of fibrils, the strain axis, the incident laser polarization direction, and the back scattered polarization configurations. From this analysis, the effective moduli of single fibrils of BC and MFC in the networks were estimated to be in the ranges of 79-88 and 29-36 GPa, respectively. It is shown also that for the model to fit the data it is necessary to use a negative Poisson's ratio for MFC networks and BC networks. Discussion of this in-plane "auxetic" behavior is given.     

Enhancement of the wet properties of transparent chitosan-acetic-acid-salt films using microfibrillated cellulose

This report presents a new route to enhance the wet properties of chitosan-acetic-acid-salt films using microfibrillated cellulose (MFC). The enhancement makes it easier to form chitosan-acetic-acid-salt films into various shapes at room temperature in the wet state. Chitosan with MFC was compared with the well-known buffer treatment. It was observed that films containing 5 wt % MFC were visually identical to the buffered/unbuffered films without MFC. Field-emission scanning electron microscopy indicated that MFC formed a network with uniformly distributed fibrils and fibril bundles in the chitosan matrix. The addition of MFC reduced the risk of creases and deformation in the wet state because of a greater wet stiffness. The wet films containing MFC were also extensible. Although the stiffness, strength and extensibility were highest for the buffered films, the wet strength of the MFC-containing unbuffered films was sufficient for wet forming operations. The effects of MFC on the mechanical properties of the dry chitosan films were small or absent. It was concluded that the addition of MFC is an acceptable alternative to buffering for shaping chitosan films/products in the wet state. The advantages are that the "extra" processing step associated with buffering is unnecessary and that the film matrix remains more water-soluble.     

微生物燃料电池降解苯酚过程中微电场对阴极微生物多样性的影响

[背景]苯酚废水作为一种毒性强、难降解的废水而备受关注.目前,微生物燃料电池(microbial fuel cell,MFC)已经广泛用于苯酚废水的降解,MFC的产电效果和苯酚的降解效率与反应器内的微生物群落有着密切关系.[目的]为了提高MFC的产电效果及对有害物质的降解能力,需要对MFC中苯酚的降解和微生物群落结构进...