激光共焦显微成像的最新进展及其在生命科学研究中的应用

激光扫描共聚焦显微镜近年来得到了迅速发展,是近代最先进的细胞生物医学分析仪器之一。通过它可以对观察样品进行无创断层扫描和成像,在生物学和医学研究诊断的各个方面都得到了广泛的应用。本文主要介绍了激光扫描共焦显微镜的基本原理和发展状况,并着重介绍了在共焦荧光显微镜中采用薄荧光层和切片成像特性图来表征成像状态的功能。这种方法一般用于表征共聚焦和多光子显微镜的成像特性,是比较显微镜切片成像条件、成像质量等相关性能的重要依据。     

Construction of a two-photon microscope for video-rate Ca imaging

We describe the construction of a video-rate two-photon laser scanning microscope, compare its performance to a similar confocal microscope, and illustrate its use for imaging local Ca(2+) transients from cortical neurons in brain slices. Key features include the use of a Ti-sapphire femtosecond laser allowing continuous tuning over a wide (700-1000 nm) wavelength range, a resonant scanning mirror to permit frame acquisition at 30 Hz, and efficient wide-field fluorescence detection. Two-photon imaging provides compelling advantages over confocal microscopy in terms of improved imaging depth and reduced phototoxicity and photobleaching, but the high cost of commercial instruments has limited their widespread adoption. By constructing one's own system the expense is greatly reduced without sacrifice of performance, and the microscope can be more readily tailored to specific applications.     

Second-harmonic imaging microscopy for visualizing biomolecular arrays in cells, tissues and organisms

Although the nonlinear optical effect known as second-harmonic generation (SHG) has been recognized since the earliest days of laser physics and was demonstrated through a microscope over 25 years ago, only in the past few years has it begun to emerge as a viable microscope imaging contrast mechanism for visualization of cell and tissue structure and function. Only small modifications are required to equip a standard laser-scanning two-photon microscope for second-harmonic imaging microscopy (SHIM). Recent studies of the three-dimensional in vivo structures of well-ordered protein assemblies, such as collagen, microtubules and muscle myosin, are beginning to establish SHIM as a nondestructive imaging modality that holds promise for both basic research and clinical pathology. Thus far the best signals have been obtained in a transmitted light geometry that precludes in vivo measurements on large living animals. This drawback may be addressed through improvements in the collection of SHG signals via an epi-illumination microscope configuration. In addition, SHG signals from certain membrane-bound dyes have been shown to be highly sensitive to membrane potential. Although this indicates that SHIM may become a valuable tool for probing cell physiology, the small signal size would limit the number of photons that could be collected during the course of a fast action potential. Better dyes and optimized microscope optics could ultimately lead to the imaging of neuronal electrical activity with SHIM.     

角膜激光共聚焦显微镜在单眼感染性角膜炎疾病诊断中的应用

摘要 目的：探讨角膜激光共聚焦显微镜在单眼感染性角膜炎疾病诊断中的应用价值。方法：回顾性研究2020年6月到2021年6月选择在本院诊治的单眼感染性角膜炎疾病患者62例,所有患者都给予角膜激光共聚焦显微镜检查,记录影像学特征并判断诊断价值（以病原学诊断为金标准）。结果：真菌性角膜炎在角膜激光共焦显微镜下的病变区纵横交错的高反射的真菌菌丝或高反光细长颗粒状的孢子,细菌性角膜炎的病变处会聚集活化的树突状细胞及大量的炎症细胞,病毒性角膜炎的基底膜下神经纤维密度、神经主干的分支数减少,棘阿米巴性角膜炎的包囊表现为圆形高反光厚壁结构。角膜激光共聚焦显微镜判断为病毒性角膜炎17例,诊断病毒性角膜炎的敏感性与特异性为94.4 %和100.0 %;角膜激光共聚焦显微镜判断为棘阿米巴性角膜炎4例,诊断棘阿米巴性角膜炎的敏感性与特异性为94.4 %和100.0 %;角膜激光共聚焦显微镜判断为细菌性角膜炎21例,诊断细菌性角膜炎的敏感性与特异性为95.5 %和97.5 %;角膜激光共聚焦显微镜判断为真菌性角膜炎20例,诊断真菌性角膜炎的敏感性与特异性为94.4 %和93.2 %。ROC曲线分析显示角膜激光共聚焦显微镜诊断细菌性角膜炎、真菌性角膜炎、病毒性角膜炎、棘阿米巴性角膜炎的曲线下面积分别为0.525、0.579、0.777、0.731。结论：角膜激光共聚焦显微镜在单眼感染性角膜炎疾病诊断中的应用能较好的区分细菌性角膜炎、真菌性角膜炎、病毒性角膜炎、棘阿米巴性角膜炎,具有良好的诊断敏感性与特异性。     

用二次谐波成像技术研究经飞秒激光切削后角膜变化

本文用二次谐波成像技术（second harmonic generation SHG）来研究飞秒激光切削后角膜结构的变化.在生物学研究,材料科学等方面都有很广泛应用的SHG成像技术能在不破坏的角膜情况下获得高对比度的角膜层析图像,分辨率为500 nm,实验装置是利用现有的双光子显微镜.本文还根据成像结果评价了飞秒激光在角膜切削中的质量,为飞秒激光微米级的精确切削和临床应用提供了实验支持.     

PALM成像中激光强度和定位精度相关性的研究

近十年来,基于单分子定位的PALM成像技术快速发展,将显微镜的分辨率提高到了2-25nm。本文发现PALM成像过程中采用的激发光强度与成像的定位精度之间有密切的联系。我们分别选择了PALM成像使用的光激活荧光蛋白、光转换荧光蛋白和光开关荧光蛋白中最常用的荧光蛋白进行验证。实验发现伴随激光强度的增加,大部分荧光蛋白的光子数先升高然后趋于饱和,背景噪声几乎线性升高。进一步分析发现荧光蛋白的定位误差随着激光强度增强先降低后升高,因此选用合适的激光强度在PALM成像实验中至关重要。如何提高PALM成像的分辨率一直是科学家研究的热点,本研究内容可以指导研究人员在PALM成像中选用合适的激发光强度,从而得到高分辨率的图像。     

3D-SIM结构照明超分辨率显微镜实现蛋白质在植物亚细胞器内的定位

基因表达产物蛋白质的亚细胞定位是解析基因生物学功能的重要证据之一。近年来出现的超分辨率光学成像技术已成功应用于人类和动物细胞中,预示着显微成像技术继激光共聚焦技术后的又一重要进步。由于植物细胞的特殊性和成像技术的研发取向,超分辨率光学成像技术在植物细胞蛋白质亚细胞定位的应用尚未见报道。该研究利用Delta Vision OMX显微镜技术,克服了叶绿体基粒中叶绿素自发荧光与融合蛋白荧光不易区分的缺陷,解决了受分辨率局限无法将植物细胞中蛋白质在亚细胞器内可视化精确定位的技术难题,成功地将植物蔗糖合成酶Zm SUS-SH1定位在烟草表皮细胞叶绿体基粒周围。该研究同时建立了一套基于撕片制片法的简便OMX显微镜制片方法,并针对OMX显微成像技术在植物细胞中蛋白质亚细胞定位的应用进行了讨论。     

Multiphoton microscopy for the in-situ investigation of cellular processes and integrity in cryopreservation

In this study we demonstrate a new noninvasive imaging method to monitor freezing processes in biological samples and to investigate life in the frozen state. It combines a laser scanning microscope with a computer-controlled cryostage. Nearinfrared (NIR) femtosecond laser pulses evoke the fluorescence of endogenous fluorophores and fluorescent labels due to multiphoton absorption.The inherent optical nonlinearity of multiphoton absorption allows 3D fluorescence imaging for optical tomography of frozen biological material in-situ. As an example for functional imaging we use fluorescence lifetime imaging (FLIM) to create images with chemical and physical contrast.     

Tomographic phase microscopy

We report a technique for quantitative three-dimensional (3D) mapping of refractive index in live cells and tissues using a phase-shifting laser interferometric microscope with variable illumination angle. We demonstrate tomographic imaging of cells and multicellular organisms, and time-dependent changes in cell structure. Our results will permit quantitative characterization of specimen-induced aberrations in high-resolution microscopy and have multiple applications in tissue light scattering.     

Principles and practices of laser scanning confocal microscopy

The laser scanning confocal microscope (LSCM) is an essential tool for many biomedical imaging applications at the level of the light microscope. The basic principles of confocal microscopy and the evolution of the LSCM into today's sophisticated instruments are outlined. The major imaging modes of the LSCM are introduced including single optical sections, multiple wavelength images, three-dimensional reconstructions, and living cell and tissue sequences. Practical aspects of specimen preparation, image collection, and image presentation are included along with a primer on troubleshooting the LSCM for the novice.     

Two-photon axotomy and time-lapse confocal imaging in live zebrafish embryos

Zebrafish have long been utilized to study the cellular and molecular mechanisms of development by time-lapse imaging of the living transparent embryo. Here we describe a method to mount zebrafish embryos for long-term imaging and demonstrate how to automate the capture of time-lapse images using a confocal microscope. We also describe a method to create controlled, precise damage to individual branches of peripheral sensory axons in zebrafish using the focused power of a femtosecond laser mounted on a two-photon microscope. The parameters for successful two-photon axotomy must be optimized for each microscope. We will demonstrate two-photon axotomy on both a custom built two-photon microscope and a Zeiss 510 confocal/two-photon to provide two examples.Zebrafish trigeminal sensory neurons can be visualized in a transgenic line expressing GFP driven by a sensory neuron specific promoter ¹. We have adapted this zebrafish trigeminal model to directly observe sensory axon regeneration in living zebrafish embryos. Embryos are anesthetized with tricaine and positioned within a drop of agarose as it solidifies. Immobilized embryos are sealed within an imaging chamber filled with phenylthiourea (PTU) Ringers. We have found that embryos can be continuously imaged in these chambers for 12-48 hours. A single confocal image is then captured to determine the desired site of axotomy. The region of interest is located on the two-photon microscope by imaging the sensory axons under low, non-damaging power. After zooming in on the desired site of axotomy, the power is increased and a single scan of that defined region is sufficient to sever the axon. Multiple location time-lapse imaging is then set up on a confocal microscope to directly observe axonal recovery from injury. Open in a separate windowClick here to view.^{(76M, flv)}     

Imaging aspects of cardiovascular disease at the cell and molecular level

Cell and molecular imaging has a long and distinguished history. Erythrocytes were visualized microscopically by van Leeuwenhoek in 1674, and microscope technology has evolved mightily since the first single-lens instruments, and now incorporates many types that do not use photons of light for image formation. The combination of these instruments with preparations stained with histochemical and immunohistochemical markers has revolutionized imaging by allowing the biochemical identification of components at subcellular resolution. The field of cardiovascular disease has benefited greatly from these advances for the characterization of disease etiologies. In this review, we will highlight and summarize the use of microscopy imaging systems, including light microscopy, electron microscopy, confocal scanning laser microscopy, laser scanning cytometry, laser microdissection, and atomic force microscopy in conjunction with a variety of histochemical techniques in studies aimed at understanding mechanisms underlying cardiovascular diseases at the cell and molecular level.     

Fluorescence and confocal laser scanning microscopy imaging of elastic fibers in hematoxylin-eosin stained sections

 We have studied the possibility of associating fluorescence microscopy and hematoxylin-eosin staining for the identification of elastic fibers in elastin-rich tissues. Elastic fibers and elastic laminae were consistently identified by the proposed procedure, which revealed itself to be easy and useful for the determination of such structures and their distribution. The fluorescence properties of stained elastic fibers are due to eosin staining as revealed by fluorescence analysis of the dye in solution, with no or only minor contribution by the elastin auto-fluorescence. The main advantage of this technique resides in the possibility of studying the distribution of elastic fibers in file material without further sectioning and staining. The use of the confocal laser scanning microscope greatly improved the resolution and selectivity of imaging elastic fibers in different tissues. The determination of the three-dimensional distribution and structure of elastic fiber and laminae using the confocal laser scanning microscope was evaluated and also produced excellent results. Accepted: 28 August 1996     

臭氧对灵芝菌丝杀灭作用的研究

以灵芝菌丝为研究对象,测定了臭氧发生器放电时间、臭氧浓度、灵芝菌丝致死率之间的曲线关系。结果表明,随着放电时问延长,臭氧浓度变大,致死率明显上升,到一定时间后趋缓,在生物显微镜下认真观察了正常菌丝和被破坏菌丝形态上的差别,在透射电子显微镜下观察了菌丝的外观结构,用激光共聚焦扫描显微镜观察了菌丝破坏前后及吖啶橙染色与不染色的形态结构,经低真空扫描电镜、原子力显微镜观察了臭氧处理前后灵芝菌丝细胞的变化情况。     

激光扫描共聚焦显微镜活细胞成像方法优化

激光扫描共聚焦显微镜可用于固定样品和活细胞样品的成像,近年来得到了广泛的应用。本文介绍了激光扫描共聚焦显微镜的基本原理及其在活细胞成像中的应用,并以FV10-ASW Viewer4.2软件为例,从扫描速度、分辨率、降噪、光电倍增调节、多参数协同优化、成像质量评估、图像后期处理等多个角度总结了激光扫描共聚焦活细胞成像系统的方法优化和推荐参数设置。本文的工作可以为活细胞实验提供一定参考。     

Infrared mass spectrometric imaging below the diffraction limit

Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS)1 is an established technique for the analysis of biological macromolecules. Its relative insensitivity to pollutants makes MALDI-MS very suitable for the direct analysis of biological samples. As such, it has facilitated great advances in the field of biomolecular imaging mass spectrometry. Traditionally, MALDI-MS imaging is performed in a scanning microprobe methodology.(2-4) However, in a recent study we have demonstrated an alternative methodology; the so-called microscope mode,(5) where the requirement for a highly focused ionization beam is removed. Spatial details from within the desorption area are conserved during the flight of the ions through the mass analyzer, and a magnified ion image is projected onto a 2D-detector. In this paper, we demonstrate how imaging mass spectrometry benefits from the microscope mode approach. For the first time, high-lateral resolution ion images were recorded using infrared MALDI at 2.94 microm wavelength. The ion optical resolution achieved was well below the theoretical limit of (light-) diffraction for the setup used, which is impossible to achieve in the conventional scanning microprobe approach.     

活细胞钙动态的共聚焦扫描显微镜检测技术

共聚焦激光扫描显微镜（Confocal Laser Scarming Microscope,CLSM）广泛应用于活细胞内钙敏感探针标记的钙水平的动态测量。较之传统的显微镜CLSM在钙成像分析上有着不可比拟的优越性,但也存在一些缺陷,近些年陆续出现了一些针对这些缺陷的改善措施,如比率法、葡聚糖探针及其他一些新技术与共聚焦显微镜的联合应用等,并且出现了诸如双光子显微镜等新型激光共聚焦显微镜。随着共聚焦钙成像技术的不断发展进步,其今后的应用前景将会越越广阔。     

Laser-scanning lithography (LSL) for the soft lithographic patterning of cell-adhesive self-assembled monolayers

We report the development of laser-scanning lithography (LSL), which employs a laser-scanning confocal microscope to pattern photoresists that can be utilized, for example, in the fabrication of masters for use in soft lithography. This convenient technique provides even exposure across the entire view field and facilitates accurate alignment of successive photoresist exposures. Features on the scale of 3 microm have been achieved to date with a 10x objective (NA 0.45). Virtual masks, instructions for laser irradiation, were drawn using the Region of Interest (ROI) function of a Zeiss LSM 510 microscope. These regions were then exposed to a 458 nm argon laser for 32 micros (0.9 mW/microm(2)). Differential interference contrast (DIC) imaging was utilized with a non-destructive 514 nm argon laser as an immediate quality check of each exposure, to align successive exposures, and to reduce chromatic aberration between imaging and exposure. Developed masters were replica-molded with poly(dimethylsiloxane) (PDMS); these masters were then utilized for microcontact printing of cell-adhesive self-assembled monolayers (SAMs) to demonstrate the utility of this process. Initial studies confirmed that human dermal fibroblast adhesion and spreading were limited to cell-adhesive SAM areas. LSL is a rapid, flexible, and readily available technique that will accelerate master design and preparation; moreover, it can be applied to additional forms of photolithography and photopolymerization for studies in cell biology, biomaterials design and evaluation, materials science, and surface chemistry.     

利用激光扫描共聚焦显微镜的肿瘤血管在体成像研究

传统的观察血管的方法需将组织制成切片,然后通过光学显微镜进行观察。显示的只是血管的某一片段而无法观察到血管的全貌。应用激光扫描共聚焦显微镜,可对活体动物血管进行断层成像,从而再现血管的结构。本方法为对肿瘤等病变组织血管进行研究提供了一种新的检测手段。     

Mass spectrometry imaging and profiling of single cells

Mass spectrometry imaging and profiling of individual cells and subcellular structures provide unique analytical capabilities for biological and biomedical research, including determination of the biochemical heterogeneity of cellular populations and intracellular localization of pharmaceuticals. Two mass spectrometry technologies-secondary ion mass spectrometry (SIMS) and matrix assisted laser desorption/ionization mass spectrometry (MALDI MS)-are most often used in micro-bioanalytical investigations. Recent advances in ion probe technologies have increased the dynamic range and sensitivity of analyte detection by SIMS, allowing two- and three-dimensional localization of analytes in a variety of cells. SIMS operating in the mass spectrometry imaging (MSI) mode can routinely reach spatial resolutions at the submicron level; therefore, it is frequently used in studies of the chemical composition of subcellular structures. MALDI MS offers a large mass range and high sensitivity of analyte detection. It has been successfully applied in a variety of single-cell and organelle profiling studies. Innovative instrumentation such as scanning microprobe MALDI and mass microscope spectrometers enables new subcellular MSI measurements. Other approaches for MS-based chemical imaging and profiling include those based on near-field laser ablation and inductively-coupled plasma MS analysis, which offer complementary capabilities for subcellular chemical imaging and profiling.