Molecular cloning and characterization of a novel thermostable xylanase from Paenibacillus campinasensis BL11

An open reading frame (XylX) with 1131 nucleotides from Paenibacillus campinasensis BL11 was cloned and expressed in E. coli. It encodes a family 11 endoxylanase, designated as XylX, of 41 kDa. The homology of the amino acid sequence deduced from XylX is only 73% identical to the next closest sequence. XylX contains a family 11 catalytic domain of the glycoside hydrolase and a family 6 cellulose-binding module. The recombinant xylanase was fused to a His-tag for affinity purification. The XylX activity was 2392 IU/mg, with a K_m of 6.78 mg/ml and a V_max of 4953 mol/min/mg under optimal conditions (pH 7, 60 °C). At pH 11, 60 °C, the activity was still as high as 517 IU/mg. Xylanase activities at 60 °C under pH 5 to pH 9 remained at more than 69.4% of the initial activity level for 8 h. The addition of Hg²⁺ at 5 mM almost completely inhibited xylanase activity, whereas the addition of tris-(2-carboxyethyl)-phosphine (TCEP) and 2-mercaptoethanol stimulated xylanase activity. No relative activities for Avicel, CMC and d-(+)-cellobiose were found. Xylotriose constitutes the majority of the hydrolyzed products from oat spelt and birchwood xylan. Broad pH and temperature stability shows its application potentials for biomass conversion, food and pulp/paper industries.     

Production of endoxylanase with enhanced thermostability by a novel polyextremophilic Bacillus halodurans TSEV1 and its applicability in waste paper deinking

The screening and selection of the culture variables followed by optimization using statistical approaches led to a 23-fold enhancement in thermo-alkali-stable xylanase production by the polyextremophilic Bacillus halodurans TSEV1. The optimization of crucial parameters involved in the extraction of xylanase from the bacterial bran led to a high enzyme recovery. The purified xylanase produced in submerged fermentation (SmF) and solid state fermentation (SSF) was visualized as a single band on SDS-PAGE with a molecular mass of 40 kDa. The SSF-xylanase is optimally active at 78 °C and pH 9.0 and stable in the pH range between 7.0 and 12.0 with a T_1/2 of 65 min at 90 °C, which is higher than that of SmF-xylanase. The higher activation energy, enthalpy of deactivation (ΔH*), free energy change of deactivation (ΔG*) and T_1/2 of SSF-xylanase than these of SmF xylanase further confirmed higher thermostability of the former than the latter. The combination of commercial cellulase and TSEV1 xylanase was highly effective in deinking of waste paper at alkaline pH and elevated temperatures.     

Cloning,expression, and characterization of a thermostable β-xylosidase from thermoacidophilic Alicyclobacillus sp. A4

A β-xylosidase gene (xylA4) was identified in the genome sequence of thermoacidophilic Alicyclobacillus sp. A4. The deduced amino acid sequence was highly homologous with the β-xylosidases of family 52 of the glycoside hydrolases (GH). The full-length gene consisted of 2097 bp and encoded 698 amino acids without a signal peptide. The gene product was successfully expressed in Escherichia coli with an activity of 564.9 U/mL. Recombinant XylA4 was purified by Ni²⁺-NTA affinity chromatography with a molecular mass of 78.5 kDa. The enzyme showed optimal activity at pH 6.0 and 65 °C, and remained stable over the pH range of 5.0–9.0. The thermostability of XylA4 is noteworthy, retaining almost all of the activity after 1 h incubation at 65 °C. Using p-nitrophenyl-β-d-xylopyranoside (pNPX) as the substrate, XylA4 had the highest specific activity (261.1 U/mg) and catalytic efficiency (601.5/mM/s) known so far for GH52 xylosidases. The enzyme displayed high tolerance to xylose, with a K_i value of approximately 88.7 mM. It also had synergy with xylanase XynBE18 from Paenibacillus sp. E18 in xylan degradation, releasing more xylose (up to 1.43 folds) than XynBE18 alone. Therefore, this thermostable xylose-tolerant β-xylosidase may have a great application potential in many industrial fields.     

Purification and partial characterisation of a thermostable xylanase from salt-tolerant Thermobifida halotolerans YIM 90462T

ThxynA, an extracellular xylanase of T. halotolerans YIM 90462^T, was purified to homogeneity from a fermentation broth by ultra-filtration, ammonium sulphate precipitation, hydrophobic chromatography and ion exchange chromatography. The purified xylanase has a molecular mass of 24 kDa and is optimally active at 80 °C and pH 6.0. The enzyme is stable over a broad pH range (pH 6.0–10.0) and shows good thermal stability when incubated at 70 °C for 1 h. The K_m and V_max values of the enzyme are 11.6 mg/mL and 434 μmol mg^?1 min^?1, respectively, using oat spelt xylan as a substrate. Moreover, the enzyme seemingly has both xylanase activity and cellulase activity. These unique properties suggest that it may be useful for industrial applications.     

A novel thermophilic xylanase from Achaetomium sp. Xz-8 with high catalytic efficiency and application potentials in the brewing and other industries

Thermophilic xylanases are of great interest for their wide industrial application prospects. Here we identified a thermophilic xylanase (XynC01) of glycoside hydrolase (GH) family 10 in a thermophilic fungal strain Achaetomium sp. Xz-8. The deduced amino acids of XynC01 showed the highest identity of ≤52% to experimentally verified xylanases. XynC01 was functionally expressed in Pichia pastoris, showed optimal activity at pH 5.5 and 75 °C with stability over a broad pH range (pH 4.0–10.0) and at temperatures of 55 °C and below. XynC01 had the highest catalytic efficiency (k_cat/K_m, 3710 mL/s/mg) ever reported for all GH 10 xylanases, and was resistant to all tested metal ions and chemical reagents. Its hydrolysis products of various xylans were simple, mainly consisting of xylobiose and xylose. Under simulated mashing conditions, XynC01 alone had a comparable effect on filtration improvement with Ultraflo from Novozymes (20.24% vs. 20.71%), and showed better performance when combined with a commercial β-glucanase (38.50%). Combining all excellent properties described above, XynC01 may find diverse applications in industrial fields, especially in the brewing industry.     

Native-State Heterogeneity of β2-Microglobulin as Revealed by Kinetic Folding and Real-Time NMR Experiments

The kinetic folding of β₂-microglobulin from the acid-denatured state was investigated by interrupted-unfolding and interrupted-refolding experiments using stopped-flow double-jump techniques. In the interrupted unfolding, we first unfolded the protein by a pH jump from pH 7.5 to pH 2.0, and the kinetic refolding assay was carried out by the reverse pH jump by monitoring tryptophan fluorescence. Similarly, in the interrupted refolding, we first refolded the protein by a pH jump from pH 2.0 to pH 7.5 and used a guanidine hydrochloride (GdnHCl) concentration jump as well as the reverse pH jump as unfolding assays. Based on these experiments, the folding is represented by a parallel-pathway model, in which the molecule with the correct Pro32 cis isomer refolds rapidly with a rate constant of 5–6 s^? 1, while the molecule with the Pro32 trans isomer refolds more slowly (pH 7.5 and 25 °C). At the last step of folding, the native-like trans conformer produced on the latter pathway isomerizes very slowly (0.001–0.002 s^? 1) into the native cis conformer. In the GdnHCl-induced unfolding assays in the interrupted refolding, the native-like trans conformer unfolded remarkably faster than the native cis conformer, and the direct GdnHCl-induced unfolding was also biphasic, indicating that the native-like trans conformer is populated at a significant level under the native condition. The one-dimensional NMR and the real-time NMR experiments of refolding further indicated that the population of the trans conformer increases up to 7–9% under a more physiological condition (pH 7.5 and 37 °C).     

Protein engineering of Bacillus acidopullulyticus pullulanase for enhanced thermostability using in silico data driven rational design methods

Thermostability has been considered as a requirement in the starch processing industry to maintain high catalytic activity of pullulanase under high temperatures. Four data driven rational design methods (B-FITTER, proline theory, PoPMuSiC-2.1, and sequence consensus approach) were adopted to identify the key residue potential links with thermostability, and 39 residues of Bacillus acidopullulyticus pullulanase were chosen as mutagenesis targets. Single mutagenesis followed by combined mutagenesis resulted in the best mutant E518I-S662R-Q706P, which exhibited an 11-fold half-life improvement at 60 °C and a 9.5 °C increase in T_m. The optimum temperature of the mutant increased from 60 to 65 °C. Fluorescence spectroscopy results demonstrated that the tertiary structure of the mutant enzyme was more compact than that of the wild-type (WT) enzyme. Structural change analysis revealed that the increase in thermostability was most probably caused by a combination of lower stability free-energy and higher hydrophobicity of E518I, more hydrogen bonds of S662R, and higher rigidity of Q706P compared with the WT. The findings demonstrated the effectiveness of combined data-driven rational design approaches in engineering an industrial enzyme to improve thermostability.     

Production and characterization of a thermostable endo-type β-xylanase produced by a newly-isolated Streptomyces thermocarboxydus subspecies MW8 strain from Jeju Island

A xylanase-producing, Gram-positive, aerobic, and spore-forming bacterium was isolated from a soil sample collected from Jeju Island and was classified as a novel subspecies of Streptomyces thermocarboxydus on the basis of 16S rRNA gene sequence similarity, the results of DNA–DNA hybridization analysis, and phenotypic characteristics. The novel strain was named as S. thermocarboxydus subsp. MW8 (=KCTC29013 = DSM52054). This strain produced extracellular xylanase. Xylanase from the strain was purified to homogeneity and had an apparent molecular weight of 52 kDa. The NH₂-terminal sequence (Ala-Glu-Ile-Arg-Leu) was distinct from those of previously reported xylanases. The purified xylanase produced xylobiose as the end-product of birchwood xylan hydrolysis. The K_m and V_max values of the purified xylanase on birchwood xylan were 1.71 mg/ml and 357.14 U/mg, respectively. The optimum pH and temperature for the enzyme were found to be 7.0 and 50 °C, respectively, and the enzyme exhibited significant heat stability. In addition, the enzyme was active over broad pH ranges: 84% of the maximum activity at pH 5.0, 84–88% at pH 6.0, 88% at pH 8.0, and 75–81% (pH 9.0). These enzymatic properties may be very useful for use in bio-industrial applications.     

High activity and selectivity immobilized lipase on Fe3O4 nanoparticles for banana flavour synthesis

Lipase (E.C.3.1.1.3) from Thermomyces lanuginosus (TL) was directly bonded, through multiple physical interactions, on citric acid functionalized monodispersed Fe₃O₄ nanoparticles (NPs) in presence of a small amount of hydrophobic functionalities. A very promising scalable synthetic approach ensuring high control and reproducibility of the results, and an easy and green immobilization procedure was chosen for NPs synthesis and lipase anchoring. The size and structure of magnetic nanoparticles were characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The samples at different degree of functionalization were analysed through thermogravimetric measurements. Lipase immobilization was further confirmed by enzymatic assay and Fourier transform infrared (FT-IR) spectra. Immobilized lipase showed a very high activity recovery up to 144% at pH = 7 and 323% at pH = 7.5 (activity of the immobilized enzyme compared to that of its free form). The enzyme, anchored to the Fe₃O₄ nanoparticles, to be easy recovered and reused, resulted more stable than the native counterpart and useful to produce banana flavour. The immobilized lipase results less sensitive to the temperature and pH, with the optimum temperature higher of 5 °C and optimum pH up shifted to 7.5 (free lipase optimum pH = 7.0). After 120 days, free and immobilized lipases retained 64% and 51% of their initial activity, respectively. Ester yield at 40 °C for immobilized lipase reached 88% and 100% selectivity.     

Biochemical properties of a β-mannanase and a β-xylanase produced by Ceriporiopsis subvermispora during biopulping conditions

One mannanase and one of the three xylanases produced by Ceriporiopsis subvermispora grown on Pinus taeda wood chips were characterized. A combination of ion exchange chromatography and SDS-PAGE data revealed the existence of a high-molecular-weight mannanase of 150 kDa that was active against galactoglucomannan and xylan. Its activity was optimal at pH 4.5. The K_m value with galactoglucomannan as substrate was 0.50 mg ml^?1. One xylanase with molecular mass of 79 kDa was also purified and characterized. Its activity was optimal at 60 °C and pH 8.0. Its K_m value with birchwood xylan as substrate was 1.65 mg ml^?1. Both the mannanase and the 79 kDa xylanase displayed relatively high activity on carboxymethyl cellulose. The sensitivity of the xylanase and mannanase to various salts was evaluated. None of the tested salts inhibited the xylanase, but Mn⁺², Fe⁺³, and Cu⁺² were strong inhibitors for the mannanase.     

C-Terminal proline-rich sequence broadens the optimal temperature and pH ranges of recombinant xylanase from Geobacillus thermodenitrificans C5

Efficient utilization of hemicellulose entails high catalytic capacity containing xylanases. In this study, proline rich sequence was fused together with a C-terminal of xylanase gene from Geobacillus thermodenitrificans C5 and designated as GthC5ProXyl. Both GthC5Xyl and GthC5ProXyl were expressed in Escherichia coli BL21 host in order to determine effect of this modification. The C-terminal oligopeptide had noteworthy effects and instantaneously extended the optimal temperature and pH ranges and progressed the specific activity of GthC5Xyl. Compared with GthC5Xyl, GthC5ProXyl revealed improved specific activity, a higher temperature (70 °C versus 60 °C) and pH (8 versus 6) optimum, with broad ranges of temperature and pH (60–80 °C and 6.0–9.0 versus 40–60 °C and 5.0–8.0, respectively). The modified enzyme retained more than 80% activity after incubating in xylan for 3 h at 80 °C as compared to wild −type with only 45% residual activity. Our study demonstrated that proper introduction of proline residues on C-terminal surface of xylanase family might be very effective in improvement of enzyme thermostability. Moreover, this study reveals an engineering strategy to improve the catalytic performance of enzymes.     

Production of cellulases and xylanase by Aspergillus fumigatus SK1 using untreated oil palm trunk through solid state fermentation

Direct utilization of untreated oil palm trunk (OPT) for cellulases and xylanase production by Aspergillus fumigatus SK1 was conducted under solid-state fermentation (SSF). The highest activities of extracellular cellulases and xylanases were produced at 80% moisture level, initial pH 5.0, 1 × 10⁸ spore/g (inoculum) with 125 μm of OPT as sole carbon source. The cellulases and xylanase activities obtained were 54.27, 3.36, 4.54 and 418.70 U/g substrates for endoglucanase (CMCase), exoglucanase (FPase), β-glucosidase and xylanase respectively. The crude cellulases and xylanase required acidic condition to retain their optimum activities (pH 4.0). Crude cellulases and xylanase were more stable at 40 °C compared to their optimum activities conditions (60 °C for FPase and 70 °C for CMCase, β-glucosidase and xylanase). SDS-PAGE and zymogram analysis showed that Aspergillus fumigatus SK1 could secrete cellulases (endoglucanase, exoglucanase and β-glucosidase), xylanase and protease. Enzymatic degradation of alkaline treated OPT with concentrated crude cellulases and xylanases resulted in producing polyoses.     

Codon-optimized expression and characterization of a pH stable fungal xylanase in Pichia pastoris

Novel xylanase (EC 3.2.1.8) is in great demand due to its industrial significance. In this study, we have developed and characterized a novel xylanase-producing yeast strain. This mature xylanase gene xyn11A consists of 870 base pairs and belongs to GH11 family. The gene sequence was optimized and synthesized, and was then cloned into yeast vector pGAPZαA under the control of the constitutive GAP promoter. SDS-PAGE analysis indicates that Xyn11A is extracellularly expressed as a glycosylated protein in P. pastoris. Xyn11A is optimally active at 70 °C and pH 7.4. This xylanase retained more than 90% of its activity after incubation at 50 °C and 60 °C for up to 1 h. Xyn11A is also stable over a wide range of pH (2.0–11.0). Most metal ions tested such as copper (Cu²⁺) and lead (Pb²⁺) have little inhibitory effects on Xyn11A. It is also resistant to pepsin and proteinase K digestion, retaining 80% and 90% of its activity after digestion at 37 °C for 1 h, respectively. Those superior properties make Xyn11A a robust xylanase with great potential for industrial use. To the best of our knowledge, this is the first report of xylanase from the fungus Corynascus thermophilus.     

Hydrolysis of the amide bond in histidine- and methionine-containing dipeptides promoted by pyrazine and pyridazine palladium(II)-aqua dimers: Comparative study with platinum(II) analogues

Two dinuclear palladium(II) complexes, [{Pd(en)Cl}₂(μ-pz)](NO₃)₂ and [{Pd(en)Cl}₂(μ-pydz)](NO₃)₂, have been synthesized and characterized by elemental microanalysis and spectroscopic (¹H and ¹³C NMR, IR and UV–vis) techniques (en is ethylenediamine; pz is pyrazine and pydz is pyridazine). The square planar geometry of palladium(II) metal centers in these complexes has been predicted by DFT calculations. The chlorido complexes were converted into the corresponding aqua complexes, [{Pd(en)(H₂O)}₂(μ-pz)]⁴⁺ and [{Pd(en)(H₂O)}₂(μ-pydz)]⁴⁺, and their reactions with N-acetylated l-histidylglycine (Ac–l–His–Gly) and l-methionylglycine (Ac–l–Met–Gly) were studied by ¹H NMR spectroscopy. The palladium(II)-aqua complexes and dipeptides were reacted in 1:1 M ratio, and all reactions performed in the pH range 2.0 < pH < 2.5 in D₂O solvent and at 37 °C. In the reactions of these complexes with Ac–l–His–Gly and Ac–l–Met–Gly dipeptides, the hydrolysis of the amide bonds involving the carboxylic group of both histidine and methionine amino acids occurs. The catalytic activities of the palladium(II)-aqua complexes were compared with those previously reported in the literature for the analogues platinum(II)-aqua complexes, [{Pt(en)(H₂O)}₂(μ-pz)]⁴⁺ and [{Pt(en)(H₂O)}₂(μ-pydz)]⁴⁺.     

Glucose isomerase production on a xylan-based medium by Bacillus thermoantarcticus

Effects of medium components on intracellular glucose isomerase (GI) production were investigated by Bacillus thermoantarcticus. The highest GI activity was obtained as 1630 U dm^?3 in the medium containing (g dm^?3): 10.6, birchwood-xylan; 5.6, yeast extract; 5.9 (NH₄)₂SO₄ at T = 55 °C in 33 cm^?3 shake-flasks. When birchwood-xylan was replaced with oat spelt- or beechwood-xylan, GI activity decreased to 1372 and 1308 U dm^?3, respectively. Effects of pH at uncontrolled-pH (pH_UC = 6.0) and controlled-pH (pH_C = 6.0) operations, and oxygen transfer at the air inlet rate of 0.5 vvm and agitation rates of 300, 500 and 700 min^?1, were investigated in 3.0 dm³ bioreactor system with 1.65 dm³ working volume in the designed medium. The highest GI activity was attained at 500 min^?1, 0.5 vvm, pH_UC = 6 as 1840 U dm^?3 where cell concentration was 2.3 g dm^?3. The use of agricultural waste xylan, as the carbon source resulted in concomitant production of xylanase and GI. The highest xylanase activity was attained as 9300 U dm^?3 at 500 min^?1 and 0.5 vvm. K_La varied between 0.008–0.033 s^?1 whereas the highest oxygen uptake rate was 0.002 mmol dm^?3 s^?1. Initially biochemical reaction limitations were effective; thereafter, mass transfer resistances became more effective.     

Kinetic analysis for suicide-substrate inactivation of microperoxidase-11: A modified model for bisubstrate enzymes in the presence of reversible inhibitors

Kinetics of microperoxidase-11 (MP-11) as a heme–peptide enzyme model in oxidation reaction of guaiacol (AH) by hydrogen peroxide was studied in the presence of amino acids, taking into account the inactivation of MP-11 during reaction by its suicide substrate, H₂O₂. Reliability of the kinetic equation was evaluated by non-linear mathematical fitting. Fitting of experimental data into a new integrated kinetic relation showed a close match between the kinetic model and the experimental data. Indeed, it was found that the mechanism of suicide-peroxide inactivation of MP-11 in the presence of amino acids is different from MP-11 and/or horseradish peroxidase. In this mechanism, amino acids compete with hydrogen peroxide for the sixth co-ordination position of iron atom in the heme group through a competitive inhibition mechanism.The proposed model can successfully determine the kinetic parameters including inactivation by hydrogen peroxide as well as the inhibitory rate constants by the amino acid inhibitor.Kinetic parameters of inactivation including the initial activity of MP-11, α₀, the apparent inactivation rate constant, k_i and the apparent inhibition rate constant for cysteine, k_I were obtained 0.282 ± 0.006 min^?1, 0.497 ± 0.013 min^?1 and 1.374 ± 0.007 min^?1 at [H₂O₂] = 1.0 mM, 27 °C, phosphate buffer 5.0 mM, pH 7.0. Results showed that inactivation and inhibition of microperoxidase as a peroxidase model enzyme occurred simultaneously even at low concentrations of hydrogen peroxide (0.4 mM). This kinetic analysis based on the suicide-substrate inactivation of microperoxidase-11, provides a tool and model for studying peroxidase models in the presence of reversible inhibitors. The introduced inhibition procedure can be used in designing activity tunable and specific protected enzyme models in the hidden and reversibly inhibited forms, which do not undergo inactivation.     

Heterologous expression and characterisation of a biosynthetic thiolase from Clostridium butyricum DSM 10702

Biosynthetic thiolases (EC 2.3.1.9) are key enzymes in the branched catabolism of diverse clostridia as their activity and regulation influence the production of organic acids and solvents. In Clostridium butyricum, they are also involved in the production of hydrogen as a sustainable and environmentally benign energy source. In this study, the gene coding for thiolase from C. butyricum DSM 10702 was cloned by genome walking. It was found to consist of 1179 bp coding for a protein with 393 amino acids and a deduced molecular weight of 41.4 kDa. The enzyme was fused to an N-terminal his-tag, expressed in Escherichia coli, purified to near homogeneity and characterised for biochemical and kinetic properties. Gel filtration chromatography revealed that the catalytically active enzyme consists of a homotetramer. The enzyme showed a K_M of ～32 μM towards acetoacetyl-CoA and of ～21 μM towards CoASH at 30 °C and pH 8.0. Claisen condensation of acetyl-CoA by thiolase was analysed in a coupled enzyme assay, where β-hydroxybutyryl-CoA dehydrogenase was applied catalysing the subsequent NADH-dependant reduction of the formed condensation product acetoacetyl-CoA. For this purpose the latter enzyme was cloned from C. butyricum DSM 10702 and recombinantly expressed in E. coli. The K_M of thiolase towards acetyl-CoA was ～674 μM at 30 °C and pH 7.5. Acetyl-CoA condensation was inhibited even at micromolar concentrations of CoASH indicating that CoASH has an important regulatory function in vivo.     

Molecular cloning and characterization of a recombinant Bombyx mori tyramine-β-hydroxylase in a silkworm cell line using a baculovirus expression vector system

Octopamine (OA) and tyramine (TA) are biogenic amines that act as neurotransmitters, neurohormones, and neuromodulators in the invertebrate nervous system. Tyramine-β-hydroxylase (TβH) catalyzes the biosynthesis of OA from TA. In this study, cDNA encoding Bombyx mori TβH (BmTβH) was cloned from the brain of the silkworm B. mori. The BmTβH mRNA comprised 2204 nucleotide residues and contained an open reading frame encoding 592 amino acids. The deduced amino acid sequence shared homology to several proteins belonging to the insect TβH family. Functional expression of the cloned cDNA was obtained using a B. mori baculovirus expression vector system. Western blot analysis revealed an immunoreactive band with a molecular mass of ~ 67.4 kDa. Reverse-phase high-performance liquid chromatography (HPLC) was used to identify the products formed during incubation of the enzyme reaction mixture. The optimum pH and temperature for the conversion of TA to OA were 7.5 and 25 °C, respectively. During incubation, the reaction was linear for the first 30 min at 25 °C and pH 7.5. Inhibitory experiments carried out with various concentrations of an inhibitor showed that this method can be used for screening of BmTβH inhibitors.     

Cloning,expression, characterisation and mutational analysis of l-aspartate oxidase from Pseudomonas putida

l-Amino acid oxidases (LAAOs) are useful catalysts for the deracemisation of racemic amino acid substrates when combined with abiotic reductants. The gene nadB encoding the l-aspartate amino acid oxidase from Pseudomonas putida (PpLASPO) has been cloned and expressed in E. coli. The purified PpLASPO enzyme displayed a K_M for l-aspartic acid of 2.26 mM and a k_cat = 10.6 s⁻¹, with lower activity also displayed towards l-asparagine, for which pronounced substrate inhibition was also observed. The pH optimum of the enzyme was recorded at pH 7.4. The enzyme was stable for 60 min at up to 40 °C, but rapid losses in activity were observed at 50 °C. A mutational analysis of the enzyme, based on its sequence homology with the LASPO from E. coli of known structure, appeared to confirm roles in substrate binding or catalysis for residues His244, His351, Arg386 and Arg290 and also for Thr259 and Gln242. The high activity of the enzyme, and its promiscuous acceptance of both l-asparagine and l-glutamate as substrates, if with low activity, suggests that PpLASPO may provide a good model enzyme for evolution studies towards AAOs of altered or improved properties in the future.     

A novel thermostable cellulase free xylanase stable in broad range of pH from Streptomyces sp. CS428

A cellulase free thermostable xylanase from Streptomyces sp. CS428 was isolated from a Korean soil sample, purified by single-step chromatography, and biochemically characterized. The extracellular xylanase was purified 26 fold with a 55% yield by CM Trisacryl cation exchange chromatography. The molecular mass of the enzyme (Xyn428) was approximately 37 kDa. Xyn428 was found to be stable over a broad pH range (4 to ～13.6) and to 50 °C and have an optimum temperature of 80 °C. Xyn428 had K_m and V_max values of 102.3 ± 1.2 mg/mL and 3225.4 ± 15 mmol/min mg, respectively, when beechwood xylan was used as substrate. N-terminal sequence of Xyn428 was INRTDHNENSYLEIHNNEAR. CS428 was grown on different agro waste xylan and produced 4197.1 U/mL of xylanase activity in 36 h of cultivation in wheat bran without supplements. Xyn428 activity was inhibited by Tris salt at concentrations above 20 mM, and produced xylose and xylobiose as major products. It was found to degrade agro waste materials by small unit of enzyme (20 U/g) as shown by electron microscopy. As being simple in purification, thermo tolerant, pH stability in broad range and ability to produce xylooligosaccharides show that Xyn428 has potential applications in industries as a biobleaching agent and for xylooligosaccharides production.