Conformations of poly-L-valine in solution

In order to test theoretical predictions that poly-L -valine can exist in an α-helical conformation, water-soluble block copolymers of L -valine and D , L -lysine were prepared. By carrying out the synthesis on a resin support (with the use of N-carboxyanhydrides) contamination of the individual blocks by any unreacted monomer from the previous block was avoided. A single glycine residue was incorporated at the C-terminus of the chain for use in amino acid analyses. Using optical rotatory dispersion and circular dichroism criteria, about 50% of the short valine block of (D , L -lysine HCl)₁₈-(L -valine)₁₅-(D , L -lysine-HCl)1₆-glycine was found to be in the right-handed α-helical conformation in 98% aqueous methanol, in water, the polymer appears to be a dimer, with the valine block being involved in the formation of an intermolecular β-structure.     

Poly(L-histidyl-L-alanyl-α-L-glutamic acid). I. Synthesis

Poly(L -histidyl-L -alanyl-α-L -glutamic acid) has been prepared in order to test the acid–base catalytic ability of a carboxyl-imidazole hydrogen-bonded system. Two different blocked histidyl-alanyl-glutamic acid monomers were used in the polymerization step. The imidazole ring was blocked with either a dinitrophenyl or a t-butyloxycarbonyl group. The γ-carboxyl of glutamic acid was protected as the benzyl ester. Both the coupling reactions and the polymerization step were via the N-hydroxysuccinimide active ester method. Thiolysis removed the dinitrophenyl group, while hydrogen bromide removed the t-butyloxycarbonyl and the benzyl groups. The water-soluble unblocked polymers obtained were fractionated on Sephadex G-50 or Bio-Gel P30. Fractions within a range of average molecular weights of 2,000 to 25,000 were isolated. Enzymatic oxidation of the acid hydrolyzate of the polymers revealed that no detectable racemization had occurred.     

Basic polypeptides as histone models. Synthesis, conformation, and interaction with DNA of statistical copolymers (Lys x,Ala y)n.

Statistical copolymers (Lys^x,Ala^y)_n were synthesized by copolymerization of N-carboxyanhydrides of L -amino acids. The conformation of copolymers in aqueous solutions was investigated using circular dichroism (CD). Calculations based on the CD data showed that polymers (Lys^x,Ala^y)_n can exhibit a random conformation, an α-helix, and a β-structure in various ratios. CD spectra of complexes of copolymers with DNA prepared by gradual dialysis from a high ionic strength to 0.15 M NaCl can be correlated with the copolymer conformation in medium and high ionic strength. For copolymers forming an α-helix and β-structure, these spectra show resemblance with similar spectra of complexes of those histones that are able to exhibit ordered conformations.     

Helix-coil stability constants for the naturally occurring amino acids in water. XII. Asparagine parameters from random poly(hydroxybutylglutamine-co-L-asparagine)

The synthesis and characterization of water-soluble random copolymers containing L -asparagine with N⁵-(4-hydroxybutyl)-L -glutamine, and the thermally induced helix-coil transitions of these copolymers in water, are described. The incorporation of L -asparagine was found to decrease the helix content of the polymers in water at all temperatures. The Zimm-Bragg parameters σ and s for the helix-coil transition in poly(L -asparagine) in water were deduced from an analysis of the copolymer melting curves in the manner described in earlier papers. The computed values of s indicate that asparagine destabilizes helical sequences at all temperatures in the range 0–60°C.     

Block copolymers of amino acids. I. Synthesis and structure of copolymers of L-alanine or L-phenylalanine with D,L-lysine-d7 or D,L-lysine

Water-soluble block copolymers of the type (A)_m-(B)_n-(A)_p, where (A)_m,p was either poly(D ,L -lysine-α,β,β,γ,γ,δ,δ-d₇) or poly(D ,L -lysine) and (B)_n was either poly(L -alanine) or poly(L -phenylalanine), were synthesized for conformational studies by proton magnetic resonance spectroscopy. Analytical determination of the amount of the initiator fragment (n-hexylamine) at the C-terminus of the copolymers was used to obtain the number-average degrees of polymerization, DP _n, and thereby, together with the amino acid composition, to establish the covalent structures of the polymers. The values of DP _n were found to be much lower than those deduced from sedimentation equilibrium or form viscosity measurements. These deviations, which also are thought to have arisen in similar studies reported in the literature, are attributable to intermolecular aggregation; the relation of such aggregation to covalent structure (and its effect on the polymerization reaction) is discussed in terms of the conditions and mechanism of synthesis of block copolymers of amino acids.     

The random copolymerization of γ-benzyl-L-glutamate and L-valine N-carboxyanhydrides: Reactivity ratio and heteogeneity studies

The random copolymerization of the N-carboxyhydrides of γ-benzyl-L -glutamate and L -valine using triethylamine as the initiator in low dielectric media reults in high-molecular-weight copolymers at low convenrson. This behavior makes it possible to apply the monomer reactivity ration theory, which was dervied for addition polymerizations, and from the use of the copolymer composition equation, the respective monomer reactivity ratios, the average and incremental copolymer compositions, and the monomer feed ratio at any conversion can be determined. A comparison of the reactivity ratios for the copolymerization of γ-benzyl-L -glutamate NCA and L -valine NCA in benzene/methylene chloride (r_G = 2.1, r_V = 0.6) with those obtained using dioxane (r_G = 2.7, r_V = 0.3) indicates that the interchain compositional heterogeneity is greater for copolymers prepared in the dioxane. For Example, at 100% conversion of the monomeric NCAs, Poly[Glu(OBzl)⁵⁰Val⁵⁰] prepared in dioxance has an interchain composition ranging from 74 to 0 mol % γ-benzyl-L -glutamate, whereas in benzene/methylene chloride the interchain composition of γ-benzyl-L -glutamae ranges from 65 to 0 mol %. Once the reactivity ratios are obtained for any pair of α-amino and N-carboxyanhydrides, the use of the aforementioned parameters relating to interchain composition can give insight into the compositional heterogeneity between chains as a function of conversion and provide a basis for the preparation of random α-amino acid copolymers that are homogeneous.     

The beta conformation of polypeptides of valine, isoleucine, and threonine in solution and solid-state: optical and infrared studies.

Water-soluble polypeptides of L -valyl and L -isoleucyl residues flanked with DL -lysyl blocks [poly(DL Lys · HCl)_x–poly(L Val)_y–poly(DL Lys · HCl)_x, poly(DL Lys · HCl)_x–poly-(L Ile)_y–poly(DL Lys · HCl)_x] and homopoly(L -threonine) were prepared. The β conformation of these polymers in water, as well as in aqueous methanol, was confirmed by infrared spectroscopy and circular dichroism studies. The optical properties of these valyl and isoleucyl polypeptides were quite different from those of previously reported synthetic homopolypeptides in the β structure. Their differences could be explained by the presence of a “single extended β chain” without either intra- or interchain association.     

The use of N-urethane-protected N-carboxyanhydrides (UNCAs) in amino acid and peptide synthesis

N-Urethane-protected N-carboxyanhydrides (UNCAs) are very reactives. They have been successfully used in peptide synthesis, in both solution and solid phase. We have demonstrated that UNCAs are interesting starting materials for the synthesis of various amino acid derivatives. Chemoselective reduction of UNCAs with sodium borohydride led the corresponding N-protected β amino alcohols. Reaction of UNCAs with Meldrum's acid, followed by cyclisation, yielded enantiomerially pure tetramic acid derivatives. Diastereoselective reduction of tetramic acid derivatives produced (4S,5S)-N-alkoxycarbonyl-4-hydroxy-5-alkylpyrrolidin-2-ones derived from amino acids, which after hydrolysis yielded statine and statine analogues. Tetramic acid derivatives could also be obtained by reaction of UNCAs with benzyl ethyl followed by hydrogenolytic deprotection and decarboxylation. UNCAs also reacted with phosphoranes to produce the ketophosphorane in excellent yields. Subsequent oxidation with oxone or with [bis(acetoxy)-iodol]-benzene produced vicinal tricarbonyl derivatives. These reactions usually proceeded smoothly and with high yields.     

Block copolymers of amino acids. II. Physicochemical data on copolymers containing L-alanine or L-phenylalanine

The water-soluble block copolymers, whose syntheses were described in the preceding paper, were subjected to ultracentrifugation, viscosity, optical rotatory dispersion circular dichroism, fluorescence, proton magnetic resonance, and infrared measurements. Discrepancies between M _n and M _w, and line broadening in the proton magnetic resonance spectra (attributed to the formation of rigid structures), support the conclusion (drawn in the preceding paper) that the block copolymers are aggregated in aqueous solution. It is shown that similar block copolymers reported in the literature are also aggregated.     

On the amino-acid-sequence distribution in benzylglutamate-methionine copolymers prepared from N-carboxyanhydrides

The amino-acid-sequence distribution in poly(γ-benzyl-L -glutamate, L -methionine) prepared by polymerization of the respective N-carboxyanhydrides has been investigated. This copolymer was converted first to poly(L -glutamic acid, L -methionine), which was subsequently cleaved by treatment with cyanogen bromide. The resulting material was fractionated into oligomers of (glutamic acid)_n-homoserine whose relative molar amounts were determined quantitatively. The results have been compared with those for a random incorporation of the methionine in a γ-benzylglutamate host polymer. Fairly close agreement has been found.     

Stereochemistry of the Reductive Amination of 4-Oxoproline Derivatives with Glycine Esters

An amination of 4-oxoproline derivatives with glycine methyl or benzyl ester and sodium cyanoborohydride led to the mixtures of corresponding diastereomeric 4-cis- and 4-trans-glycinoproline derivatives. We found that the ratio of diastereomers mainly depends on the structure of 4-oxoproline ester groups and, to a lesser extent, on the structure of N-acyl substituents. The best results were achieved with tert-butyl ester group; it ensured good yields of the amination products and the greatest prevalence of 4-cis-isomers. The structure of ester group in glycine molecule only scarcely affected the resulting ratio of N-(N-benzyloxycarbonylglycyl)-4-glycinoprolines.     

The infuence of interchain compositional heterogeneity on the conformation in random copolymers of γ-benzyl-L-glutamate and L-valine

Variation in the solvent used for the copolymerization of γ-benzyl-L -glutamate and L -valine N-carboxyanhydrides provides copolymers which have variable interchain compositions, and this variation in interchain compositional heterogeneity is reflected in the solid-state conformations of the respective copolymers. Poly[Glu(OBzl)²⁹Val⁷¹] prepared in dioxane exhibits a β-structure, whereas a copolymer of the same average composition prepared in benzene/methylene chloride shows predominantly an β-helix conformation with a small amount of β-structure. The use of the monomer reactivity ratio permits the calculation of the average and incremental copolymer compositions at any conversion; thus, correlations between conformation and interchain compositional heterogeneity can be made. In general, copolymers prepared in dioxane show a greater distribution of chain composition and therefore permit a wider variety of conformation than copolymers prepared in benzene/methylene chloride under identical conditions.     

Polymerization of DL-phenylalanine NCA initiated by copolymer of sarcosine and DL-phenylalanine

Polymerizations of DL -phenylalanine NCA by block copolymers of sarcosine and DL -phenylalanine, designated by (Phe)_m(Sar)n and capable of reaction at the phenylalanyl terminal, were investigated in nitrobenzene solution at 25°C. With increasing n for constant m (m = 0, 1, 2, and 5), the polymerization rate greatly increased. Previously the acceleration of the initiation reaction in the polymerization of DL -phenylalanine NCA by polysarcosine (m = 0) was reported. The present results showing the acceleration by the copolymers of sarcosine and DL -phenylalanine indicate the presence of the polymer effect in the propagation reaction as well. However, the polymer effect was most marked with polysarcosine (m = 0), and decreased with increasing m. The same polymerizations by sequential copolymers composed of ten sarcosine units and two DL -phenylalanine units were also investigated. Again with these copolymer catalysts the polymerization rate was larger than that by monomeric amines. But the polymer effect decreased sharply when the phenylalanine units take positions near the terminal amine group of the copolymer catalyst. These two deteriorating effects of the phenylalanine unit have been interpreted in terms of the decrease of the flexibility of polymer chain, caused possibly by an intramolecular hydrogen bond of the phenylalanine unit.     

Synthèse et structure de la poly-O-carbobenzoxy L- tyrosine et de copolymères de O-carbobenzoxy L-tyrosine et de glutamate de benzyle ou d'aspartate de benzyle

The optical rotatory dispersion of copolymers of O-carbobenzoxy-L -tyrosine and benzyl L (or D )-glutamate as well as benzyl L -aspartate, dissolved in nonpolar solvent, has been studied. Moffitt's equation permits the determination of b₀ coefficients whose variation, with varying composition in amino acid residues, suggests that the molecules of poly-O-carbobenzoxy-L -tyrosine have a helical structure similar to that of poly-(benzyl L -glutamate). Results obtained from infrared spectroscopy and x-ray diffraction show that the copolymers possess a helical conformation in the solid state, even when they are very rich in carbobenzoxy-L -tyrosine residues. The value of the b₀, coefficient for poly-O-carbobenzoxy-L -tyrosine may be explained by a regular stacking of the chromophore groups around the helical backbone. The ordering of the molecules of this polymer in a purely helical structure seems favored by the insertion of a small number of foreign residues in the polypeptide chain.     

Polymerization of N-carboxyanhydrides of various α-amino acids using secondary amines as initiator

In the polymerizations of alanine, γ-ethyl glutamate, and leucine N-carboxyanhydrides (NCA's) initiated by tertiary amines and some secondary amines such as N-methyl-L -alanine dialkylamide, a stereoselectivity was observed: the polymerization rates of L - and D -NCA's were identical to each other and larger than that of DL -NCA. However, this selectivity was not observed in the polymerizations of valine and isoleucine NCA's initiated by N-methyl-L -alanine dialkylamide. The stereoselective polymerizations of valine and isoleucine NCA's were induced only with tetriary amines such as tri-n-butylamine. N-Methyl-L -alanine di-alkylamide has been shown to initiate the polymerization of usual α-amino acid NCA according to the activated-NCA mechanism, but it initiated the polymerizations of valine and isoleucine NCA's according to the primary amine-type mechanism. This is because in the latter NCA's the N–H group is masked by the adjacent C^β-branched alkyl substituent against the approach of the secondary amine. Poly(DL -alanine)s produced in the stereoselective polymerization had higher viscosities and were more stereoblock-like than those produced without the stereoselectivity. These experimental results indicate that the stereoselective polymerization is possible only when the polymerization proceeds through the activated-NCA mechanism.     

Block sequential polypeptides of L-alanine and glycine with D, L-glutamic acid

Sequential polypeptides of L -alanine(A) and glycine(G), which were incorporated between two blocks of poly(D ,L -glutamic acid) (DL), were synthesized by applying Merri-field's solid-phase method. On the basis of optical rotatory dispersion criteria, DL(A)₃₈-DL was found to assume the α-helix in the whole range of the water-methanol system; whereas other block sequential polypeptides were found to assume the random-coiled conformation in water and partly the α-helix at the high methanol content. The stability of the α-helix decreased in the order: DL(A)₃₈DL, DL(A₂G)₁₀DL, DL(A₂G)₆DL, and DL(A₃G)₇DL. This phenomenon may be explained in terms of the dependence of hydrophobic bonding between the C₃H group of the ith L -alanine regularly arranged on the surface of the α-helix and the C₂H group of the (i + 3)th residue on whether the residue is alanine or glycine. The role which the methanol plays in stabilizing the α-helix is also discussed.     

Synthesis of optically pure chrysobactin and immunoassay development

Chrysobactin (-N-(2,3-dihydroxybenzoyl)-d-lysyl-l-serine), a siderophore that is essential for systemic virulence by plant pathogenic Erwinia chrysanthemi, was synthesized with high diastereomeric purity. Chrysobactin was prepared by coupling the N-hydroxysuccinimide ester of -N-(2,3-dibenzyloxybenzoyl)--N-Cbz-d-lysine with l-serine benzyl ester followed by deprotection via hydrogenolysis. Optically pure chrysobactin was obtained with 98% overall yield. A monoclonal antibody to ferric chrysobactin was developed and characterized as IgM. The antibody reacts with chrysobactin, ferric chrysobactin and less strongly with ferric dihydroxybenzoic acid. The antibody reacts weakly with the siderophores ferrichrome, A, ferric pseudobactin and ferric rhodotorulic acid. This antibody was used in a competitive immunoassay to detect ferric chrysobactin at 10^–8 to 10^–10 mol. This immunoassay may provide a useful method for the detection of chrysobactin in plant samples.     

Carrier design: Conformational studies of amino acid (X) and oligopeptide (X-DL-Alam) substituted poly(L-lysine)

The present study was undertaken to examine the influence of the reversal of the sidechain sequential order on the conformation of branched polypeptides. At the same time, the influence of the optically active amino acid joined directly to the poly (L -Lys) backbone and the DL -Ala oligomer grafted as chain-terminating fragment were separately analyzed. Therefore two sets of polypeptides were synthesized corresponding to the general formula poly [Lys-(X_i,)] (XK) and poly[Lys-(DL -Ala_m-X_i)] (AXK) when X = Ala, D -Ala, Leu, D -Leu, Phe, D -Phe, Ile, Pro, Glu.,D -Glu, or His. For coupling amino acid X to polylysine, three types of active ester methods were compared: the use of pentafluorophenyl or pentachlorophenyl ester, and the effect of the addition of an equimolar amount of 1-hydroxybenzotriazole. After cleavage of protecting groups, AXK polypeptides were synthesized by grafting short oligo (DL -Ala) chains to XK by using N-carboxy-DL -Ala anhydride. The CD measurements performed in water solutions of various pH values and ionic strengths were used for classification of the polypeptide conformations as either ordered (helical) or unordered. Different from what was observed with the unsubstituted poly (L -Lys), poly[Lys-(X_i)] type polypeptides can adopt ordered structure even under nearly physiological conditions (pH 7.3, 0.2M NaCl). These data suggest that the introduction of amino acid residue with either (ar) alkyl side chain (Ala, Leu, Phe) or negatively charged side chain (Glu) promotes markedly the formation of ordered structure. Comparison of chiroptical properties of poly [Lys- (DL -Ala_m-X_i)] and of poly [Lys- (X_i)] reveals that side-chain interactions play an important role in the stabilization of ordered solution conformation of AXK type branched polypeptides. The results give rather conclusive evidence that not only hydrophobic interactions, but also ionic attraction, can be involved in the formation and stabilization of helical conformation of branched polypeptides. © 1993 John Wiley & Sons, Inc.     

Synthesis of 3-O-β-d-xylopyranosyl-l-serine (xylosylserine) andO-β-d-galactopyranosyl-(1-4)-O-β-d-xylopyranosyl-l-serine (galactosylxylosylserine) and use of the synthetic products for detection of galactosyltransferase I activity in rat liver

3-O-β-d-Xylopyranosyl-l-serine (xylosylserine) was synthesized by the following three-step procedure: 1) 2,3,4-tri-O-benzoyl-α-d-xylopyranosyl bromide (benzobromoxylose) was condensed withN-carbobenzoxy-l-serine benzyl ester using the silver triflate-collidine complex as promoter; 2) theN-carbobenzoxy and benzyl ester groups in the resultant glycoside were cleaved by transfer hydrogenation with palladium black as catalyst and ammonium formate as hydrogen donor; and 3) the benzoyl groups were removed with methanolic ammonia. Xylosylserine was obtained in an overall yield of 70%. O-β-d-Galactopyranosyl-(1-4)-O-β-d-xylopyranosyl-(1-3)-l-serine (galactosylxylosylserine) was also synthesized by this methodology and was characterized by 2-dimensional (2D) NMR spectroscopy techniques. The two serine glycosides (xylosylserine and galactosylxylosylserine) were used in detection and partial purification of galactosyltransferase I (UDP-d-galactose:d-xylose galactosyltransferase) from adult rat liver.     

Carrier design: Synthesis and conformational studies of poly (L-lysine) based branched polypeptides with hydroxyl groups in the side chains

In the present study the development of a new series of branched polypeptides that contain hydroxyl groups in side chains is reported. Serine or threonine were attached by 1-hydroxy-benzotriazole catalyzed active ester method to the N-terminals of oligo (DL -alanine) chains grafted to a polylysine backbone resulted in poly[Lys-(Ser₁-DL -Ala_m)] (SAK) and poly-[Lys-(Thr_i-DL -Ala_m)] (TAK). Ser was coupled also directly to the η-amino groups of polylysine followed by polymerization of N-carboxy-DL -alanine anhydride resulting oligo (DL -Ala) chain terminals. In this way a reverse sequence was built up in the side chain corresponding to the poly[Lys-(DL -Ala_m-Ser_i)] (ASK). The number of hydroxyl groups in the polymer was increased by the synthesis of a branched polypeptide with oligo (DL -serine) branches instead of oligo (DL -alanine) ones—poly[Lys-(DL -Ser_m)] (SK). Classification of solution conformations of branched polypeptides was carried out by CD spectroscopy performed in water solution of various pH values and ionic strengths. Incorporation of single Ser residues in poly[Lys-(X_i)]-type polypeptides markedly promotes the formation of ordered structure without resulting precipitation even in high salt concentration. The presence of branches with multiple DL -Ser residues resulted in a slightly decreased ability of the polypeptide backbone to adopt an ordered conformation. Comparison of the CD properties of the SAK-ASK pair demonstrates that these compounds are similar, showing an increased tendency to form an ordered spatial arrangement in solution at elevated pH or ionic strength; however, differences in their CD spectra suggest that SAK has higher capability to form regular conformation under comparable conditions. The replacement of Ser by the Thr residue in poly[Lys-(X_i-DL -Ala_m)] induced a conformational transition and TAK exhibited a more helical structure. These results might indicate that not only hydrophobic or ionic attraction, but also H-bond interaction, can play a role in the formation and/or stabilization of ordered conformation of branched polypeptides. Findings with the hydroxyl group containing polymers reported in this paper can also explain their prolonged shelf stability and high water solubility. © 1997 John Wiley & Sons, Inc. Biopoly 42: 719–730, 1997