Dramatic increase in the signal and sensitivity of detection <Emphasis Type="Italic">via</Emphasis> self-assembly of branched DNA

In molecular testing using PCR, the target DNA is amplified via PCR and the sequence of interest is investigated via hybridization with short oligonucleotide capture probes that are either in a solution or immobilized on solid supports such as beads or glass slides. In this report, we report the discovery of assembly of DNA complex(es) between a capture probe and multiple strands of the PCR product. The DNA complex most likely has branched structure. The assembly of branched DNA was facilitated by the product of asymmetric PCR. The amount of branched DNA assembled was increased five fold when the asymmetric PCR product was denatured and hybridized with a capture probe all in the same PCR reaction mixture. The major branched DNA species appeared to contain three reverse strands (the strand complementary to the capture probe) and two forward strands. The DNA was sensitive to S1 nuclease suggesting that it had single-stranded gaps. Branched DNA also appeared to be assembled with the capture probes immobilized on the surface of solid support when the product of asymmetric PCR was hybridized. Assembly of the branched DNA was also increased when hybridization was performed in complete PCR reaction mixture suggesting the requirement of DNA synthesis. Integration of asymmetric PCR, heat denaturation and hybridization in the same PCR reaction mixture with the capture probes immobilized on the surface of solid support achieved dramatic increase in the signal and sensitivity of detection of DNA. Such a system should be advantageously applied for development of automated process for detection of DNA.     

Matching base-pair number dependence of the kinetics of DNA-DNA hybridization studied by surface plasmon fluorescence spectroscopy

Two single-stranded DNA oligonucleotides consisting of complementary base-pairs can form double strands. This phenomenon is well studied in solutions, however, in order to clarify the physical mechanism of the hybridization occurring at a solid/solution interface, we studied the kinetics by surface plasmon fluorescence spectroscopy (SPFS): one single-stranded oligo-DNA (probe-DNA) was immobilized on the substrate, the other one (target-DNA) labelled with a fluorescent probe was added to the flow cell. After hybridization, the chromophores could be excited by the surface plasmon mode and their fluorescence detected with high sensitivity. The dependence of the k(on) and k(off) rate constants on the length of the hybridizing oligonucleotides was investigated by using a MM0 series (no mismatch) and the kinetics was found to be well described by a Langmuir adsorption model. From these measurements we found that also in the case of surface hybridization the affinity of the duplexes decreases as the number of matching base-pairs decreases from 15 to 10. In order to show that SPFS is the powerful technique with high sensitivity, the hybridization process for mixed target-oligos was measured by SPFS and analyzed by an expanded Langmuir model in which two components of target-oligo can bind to probe-DNA at the sensor surface competitively. Two sets of the k(on) and k(off) obtained from the experiment are successfully consistent with the k(on) and k(off) obtained from experiments for single (pure) target-DNA.     

Thermodynamically modulated partially double-stranded linear DNA probe design for homogeneous real-time PCR

Real-time PCR assays have recently been developed for diagnostic and research purposes. Signal generation in real-time PCR is achieved with probe designs that usually depend on exonuclease activity of DNA polymerase (e.g. TaqMan probe) or oligonucleotide hybridization (e.g. molecular beacon). Probe design often needs to be specifically tailored either to tolerate or to differentiate between sequence variations. The conventional probe technologies offer limited flexibility to meet these diverse requirements. Here, we introduce a novel partially double-stranded linear DNA probe design. It consists of a hybridization probe 5'-labeled with a fluorophore and a shorter quencher oligo of complementary sequence 3'-labeled with a quencher. Fluorescent signal is generated when the hybridization probe preferentially binds to amplified targets during PCR. This novel class of probe can be thermodynamically modulated by adjusting (i) the length of hybridization probe, (ii) the length of quencher oligo, (iii) the molar ratio between the two strands and (iv) signal detection temperature. As a result, pre-amplification signal, signal gain and the extent of mismatch discrimination can be reliably controlled and optimized. The applicability of this design strategy was demonstrated in the Abbott RealTime HIV-1 assay.     

应用纳米金探针检测HSV-2的目视化基因芯片

本实验建立了一种应用金标链霉亲和素探针的目视化高灵敏度检测单纯疱疹病毒2型(HerpesSimplexVirus-2,HSV-2)的基因芯片。该芯片以HSV-2DNA聚合酶的高保守区为靶序列,设计HSV-2特异性引物和探针,通过PCR反应使扩增产物标记上生物素;氨基修饰的探针固定在活化的玻片上,与生物素标记的扩增产物杂交;利用生物素与链酶亲和素高亲合力的特性,加入纳米金标记的链酶亲和素后形成生物素-链酶亲和素-纳米金生物反应放大系统;银染反应后,达到目视化检测HSV-2效果。该HSV-2检测基因芯片能目视化检测出100fmol/L的HSV-2扩增产物,具有灵敏度高,低成本的特点,通过临床标本验证表明该芯片具有较高的准确性。     

A portable generic DNA bioassay system based on in situ oligonucleotide synthesis and hybridization detection

In this study, we present a portable and generic DNA bioassay system based on in situ oligonucleotide synthesis followed by hybridization based detection. The system include two main parts, an oligonucleotide synthesizer and a fluorescence detection system. The oligonucleotide synthesizer is based on microfluidic technology and capable of synthesizing any desired oligonucleotide which can be either used as a primer for PCR based detection (external) or a probe for hybridization based detection (integrated) of a target DNA analyte. The oligonucleotide sequence can be remotely sent to the system. The integrated fluorescence detection system is based on a photodiode to detect Texas Red fluorophore as low as 0.5 fmol. The complete system, integrating the oligonucleotide synthesizer and fluorescence detection system, was successfully used to distinguish DNA from two different bacteria strains. The presented generic portable instrument has the potential to detect any desired DNA target sequence in the field. Potential applications are for homeland security and fast responses to emerging bio-threats.     

Detection of Fusarium culmorum in wheat by a surface plasmon resonance-based DNA sensor

A surface plasmon resonance (SPR) sensor based on DNA hybridization has been developed for the detection of Fusarium culmorum, a fungal pathogen of cereals. A 0.57 kbp DNA fragment of F. culmorum was amplified by specific primers and a 25-mer oligonucleotide probe was selected within the sequence of the PCR amplicon. After biotinilation, the probe was immobilized on a streptavidin sensor chip and tested for biospecific interaction with PCR products of F. culmorum. The effect of denaturating agents (formamide and urea) and ionic strength (NaCl) on hybridization efficiency of double-stranded PCR products with the immobilized probe and the specificity of the probe were investigated. The SPR biosensor was successfully used for the detection of F. culmorum in culture material of different strains and in naturally infected wheat samples. Tested on fungal cultures, it showed a good selectivity for F. culmorum against other species of either Fusarium or other fungal genera. A background signal was observed in wheat samples strictly depending on the DNA amount of the testing matrix. Testing 30 ng of durum wheat DNA the detection limit was 0.06 pg of F. culmorum DNA. The developed PCR-SPR assay allowed to detect F. culmorum with sensitivity and specificity higher than gel-electrophoresis analysis.     

Quantitation of polymerase chain reaction products by hybridization-based assays with fluorescent, colorimetric, or chemiluminescent detection.

In this report two nonradioactive assays for quantitative analysis of polymerase chain reaction (PCR) products are presented. In the first assay, magnetic beads coated with streptavidin were used to capture biotinylated PCR fragments. After hybridization with a hapten-labeled probe, these beads were analyzed either by flow cytometry (method A) or by immunoenzymatic reactions (method B). Using a dilution series of purified PCR products, we consistently found a lower detection limit of 1.5 fmol for method A than the 0.15-fmol limit for method B. In the second assay we used the peroxidase-based enhanced chemiluminescence system in combination with a cooled charge-coupled device camera to quantify PCR fragments that were spotted on membranes. A linear logarithmic response was observed between the amount of light produced within a certain time interval and the number of DNA molecules. With an exposure time of 5 min, a detection limit of 0.15 fmol was found. Longer exposure times did not result in a higher sensitivity. We conclude that the assays are of sufficient sensitivity for application in quantitative PCR strategies. The nonradioactive technology facilitates implementation of these assays in routine settings.     

Plasma polymerized epoxide functional surfaces for DNA probe immobilization

The development of functional surfaces for the immobilization of DNA probe is crucial for a successful design of a DNA sensor. In this report, epoxide functional thin films were achieved simply by pulsed plasma polymerization (PP) of glycidyl methacrylate (GMA) at low duty cycle. The presence of epoxide groups in the resulting ppGMA films was confirmed by Fourier transform infrared spectroscopy. The ppGMA coatings were found to be resistant to the non-specific adsorption of DNA strands, while the epoxide groups obtained could react with amine-modified DNA probes in a mild basic environment without any activation steps. A DNA sensor was made, and was successfully employed to distinguish different DNA sequences with one base pair mismatch as seen by surface plasmon enhanced fluorescence spectroscopy (SPFS). The regeneration of the present DNA sensor was also discussed. This result suggests that surface modification with ppGMA films is very promising for the fabrication of various DNA sensors.     

Sex determination based on amelogenin DNA by modified electrode with gold nanoparticle

We have developed a simple and renewable electrochemical biosensor based on carbon paste electrode (CPE) for the detection of DNA synthesis and hybridization. CPE was modified with gold nanoparticles (AuNPs), which are helpful for immobilization of thiolated bioreceptors. AuNPs were characterized by scanning electron microscopy (SEM). Self-assembled monolayers (SAMs) of thiolated single-stranded DNA (SH–ssDNA) of the amelogenin gene was formed on CPE. The immobilization of the probe and its hybridization with the target DNA was optimized using different experimental conditions. The modified electrode was characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The electrochemical response of ssDNA hybridization and DNA synthesis was measured using differential pulse voltammetry (DPV) with methylene blue (MB) as an electroactive indicator. The new biosensor can distinguish between complementary and non-complementary strands of amelogenin ssDNA. Genomic DNA was extracted from blood and was detected based on changes in the MB reduction signal. These results demonstrated that the new biosensor could be used for sex determination. The proposed biosensor in this study could be used for detection and discrimination of polymerase chain reaction (PCR) products of amelogenin DNA.     

Analysis of polymerase chain reaction products by high-performance liquid chromatography with fluorimetric detection and its application to DNA diagnosis

We describe the development of a sensitive high-performance liquid chromatographic (HPLC) method for polymerase chain reaction (PCR) products using bisbenzimide (Hoechst 33258 dye) based fluorimetric detection. The detection limit and specificity for double-strand DNA detection are improved in comparison with HPLC with UV absorbance detection. This HPLC, using a column packed with diethylaminoethyl-bonded non-porous resin particles, was applied to the detection of allele-specific PCR and restriction fragment length polymorphism analysis. We also developed a hybridization method analyzed by HPLC. DNA fragments (149 bp) containing the mutation site (C→A,G,T) in the N-ras gene were amplified by PCR. Fluorescein isothiocyanate (FITC)-labeled DNA probes were also prepared by PCR using FITC-labeled 5′ primer. Analysis of mutation was performed by the separation of a hybrid and non-reactive DNA probe with HPLC with fluorimetric detection after the hybridization of target DNA (149 bp) and a FITC DNA probe. The effects of various factors on hybridization were examined to establish optimal assay conditions. Under the conditions determined, a point mutation in PCR products obtained from the N-ras gene could be detected specifically by this method. The analysis of PCR products by HPLC may potentially be useful for DNA diagnosis.     

Hybridization assay of hepatitis B virus by QCM peptide nucleic acid biosensor

Although the analyses of HBV genomic DNA have traditionally been performed with commercial techniques, the high cost and long time consumed have hindered their applications in routinely diagnosis and prognosis of infection. We construct peptide nucleic acid (PNA) piezoelectric biosensor for real-time monitoring of hybridization of hepatitis B virus (HBV) genomic DNA. The PNA probe can combine to target DNA sequences more effectively and specifically than a DNA probe. The PNA probe was designed and immobilized on the surface of the biosensor to substitute the conventional DNA probe for direct detection of HBV genomic DNA without previous amplification by PCR. The hybridization assay was completed in 50 min. The detection limit was 8.6 pg/L and the clinical specificity was 94.44% compared with real time-PCR (RT-PCR). The PNA probe was able to distinguish sequences that differ only in one base. Detection sensitivity can be improved and detection time can be decreased by adding RecA protein-coated complementary ssDNA which complement to HBV gene regions. The QCM system we designed has the advantages of being rapid, label-free and highly sensitive and can be a useful supplement to commercial assay methods in clinical chemistry.     

Improved assay-dependent searching of nucleic acid sequence databases

Nucleic acid-based biochemical assays are crucial to modern biology. Key applications, such as detection of bacterial, viral and fungal pathogens, require detailed knowledge of assay sensitivity and specificity to obtain reliable results. Improved methods to predict assay performance are needed for exploiting the exponentially growing amount of DNA sequence data and for reducing the experimental effort required to develop robust detection assays. Toward this goal, we present an algorithm for the calculation of sequence similarity based on DNA thermodynamics. In our approach, search queries consist of one to three oligonucleotide sequences representing either a hybridization probe, a pair of Padlock probes or a pair of PCR primers with an optional TaqMantrade mark probe (i.e. in silico or 'virtual' PCR). Matches are reported if the query and target satisfy both the thermodynamics of the assay (binding at a specified hybridization temperature and/or change in free energy) and the relevant biological constraints (assay sequences binding to the correct target duplex strands in the required orientations). The sensitivity and specificity of our method is evaluated by comparing predicted to known sequence tagged sites in the human genome. Free energy is shown to be a more sensitive and specific match criterion than hybridization temperature.     

Solid-phase time-resolved fluorescence detection of human immunodeficiency virus polymerase chain reaction amplification products.

A new assay system for the detection of polymerase chain reaction (PCR) amplification products is presented. This single-pot sandwich assay system employs solid-support oligonucleotide-coated capture beads, a rare earth metal chelate-labeled probe, and a time-resolved fluorescence detection. The new assay system was evaluated for various reaction conditions including, DNA denaturation time, hybridization salt concentration, probe concentration, and hybridization time, all of which are important in designing an assay with a high level of sensitivity for the detection of duplex DNA. This nonisotopic assay system was applied to the detection of purified human immunodeficiency virus (HIV) DNA and sensitivity was compared with agarose gel electrophoresis and slot blot hybridization using a 32P-labeled probe. We were able to detect the amplified product from one copy of HIV DNA after 35 cycles of PCR amplification in less than 30 min using this assay, which compared with one copy by gel electrophoresis after 40 cycles of PCR amplification and one copy by slot blot hybridization after 35 cycles of PCR amplification and an overnight exposure of the autoradiogram. Thus, this assay is rapid, sensitive, and easy to use.     

Electrochemical sandwich assay for attomole analysis of DNA and RNA from beer spoilage bacteria Lactobacillus brevis

Attomole (10(-18)mol) levels of RNA and DNA isolated from beer spoilage bacterial cells Lactobacillus brevis have been detected by the electrochemical sandwich DNA hybridization assay exploiting enzymatic activity of lipase. DNA sequences specific exclusively to L. brevis DNA and RNA were selected and used for probe and target DNA design. The assay employs magnetic beads (MB) modified with a capture DNA sequence and a reporter DNA probe labeled with the enzyme, both made to be highly specific for L. brevis DNA. Lipase-labeled DNAs captured on MBs in the sandwich assay were collected on gold electrodes modified with a ferrocene (Fc)-terminated SAM formed by aliphatic esters. Lipase hydrolysis of the ester bond released a fraction of the Fc redox active groups from the electrode surface, decreasing the electrochemical signal from the surface-confined Fc. The assay, shown to be efficient for analysis of short synthetic DNA sequences, was ineffective with genomic double stranded bacterial DNA, but it allowed down to 16 amole detection of 1563 nts long RNA, isolated from bacterial ribosomes without the need for PCR amplification, and single DNA strands produced from ribosomal RNA. No interference from E. coli RNA was registered. The assay allowed analysis of 400 L. brevis cells isolated from 1L of beer, which fits the "alarm signal" range (from 1 to 100 cells per 100mL).     

A new approach for the detection of DNA sequences in amplified nucleic acids by a surface plasmon resonance biosensor

In this paper, a simple and useful approach for DNA sensing based on surface plasmon resonance (SPR) transduction is reported. A new DNA sample pre-treatment has been optimised to allow fast and simple detection of hybridisation reaction between a target sequence in solution and a probe immobilised on the sensing surface. This pre-treatment consisted in a denaturation procedure of double stranded DNA containing the target sequence and was based on an high temperature treatment (95 degrees C, 5 min) followed by a 1 min incubation with small oligonucleotides. The oligonucleotides are designed to prevent the re-hybridising of the denatured strands, while enabling the target sequence to bind the immobilised probe. The important parameters of the procedure, i.e. incubation time, length and concentration of the oligonucleotides, have been studied in detail. The optimised DNA denaturation procedure has been successfully applied to the detection of amplified DNA with a commercially available SPR biosensor (Biacore X). DNA samples extracted from plant and human blood were tested after amplification by polymerase chain reaction (PCR).     

两种DNA探针杂交检测结核分支杆菌方法的研究

为改进结核杆菌DNA探针的特异性与实用性,研制了以生物素标记的两种对结核分支杆菌特异的DNA探针:一个5’端标记的20bp的寡核苷酸探针和一个采用PCR方法合成的188bp长链探针。两种探针分别与结核分支杆菌的全染色体DNA,以及基因组上IS6110序列的一段317bp的PCR扩增产物进行斑点杂交,以碱性磷酸酶(AP)催化的染色反应检测,测试了两个探针的敏感性和特异性。系统地比较研究了两种探针杂交检测条件:探针的浓度选择,杂交温度与洗膜温度的选择,以及杂交与洗膜温度对检测的敏感性与特异性的影响。寡核苷酸探针和188bp探针杂交检测纯化结核分支杆菌基因组DNA的敏感性分别为100ng与6ng,杂交检测PCR产物的敏感性分别是400pg与50pg。两探针的最佳杂交浓度均为40～160ng/ml,最佳杂交温度分别是42℃与68℃,最佳洗膜温度分别是60℃与60～68℃之间。两种探针均仅与结核分支杆菌及BCG有杂交信号,而与其它受试分支杆菌及非分支杆菌杂交结果都呈阴性。它们的特异性都很强,但188bp探针的敏感性约是寡核苷酸探针的7～16倍,而且188bp探针检测本底较低,是检测结核分支杆菌的较佳选择     

DNA probes on beads arrayed in a capillary, 'Bead-array', exhibited high hybridization performance

A DNA analysis platform called 'Bead-array' is presented and its features when used in hybridization detection are shown. In 'Bead-array', beads of 100- micro m diameter are lined in a determined order in a capillary. Each bead is conjugated with DNA probes, and can be identified by its order in the capillary. This probe array is easily produced by just arraying beads conjugated with probes into the capillary in a fixed order. The hybridization is also easily completed by introducing samples (1-300 micro l) into the capillary with reciprocal flow. For hybridization detection, as little as 1 amol of fluorescent-labeled oligo DNA was detected. The hybridization reaction was completed in 1 min irrespective of the amount of target DNA. When the number of target molecules was smaller than that of probe molecules on the bead, 10 fmol, almost all targets were captured on the bead. 'Bead-array' enables reliable and reproducible measurement of the target quantity. This rapid and sensitive platform seems very promising for various genetic testing tasks.     

Detection of hepatopancreatic parvovirus in Thai shrimp Penaeus monodon by in situ hybridization,dot blot hybridization and PCR amplification

Hepatopancreatic parvovirus (HPV) infects the hepatopancreas in penaeid shrimp and retards their growth. The DNA sequence of HPV from Thai shrimp Penaeus monodon (HPVmon) differs from HPV of Penaeus chinensis (HPVchin) by approximately 30%. In spite of this difference, commercial PCR primers (DiagXotics) developed from HPVchin to yield a 350 bp PCR product do give a 732 bp product with HPVmon DNA template. On the other hand, the sensitivity of HPVmon detection with these primers and with hybridization probes designed for HPVchin is significantly lower than it is with HPVchin. To improve sensitivity for HPVmon detection, we used the sequence of the 732 bp HPVmon PCR amplicon described above to develop specific PCR primers (H441F and H441R) and hybridization probe. The primers could detect as little as 1 fg of purified HPVmon DNA while the 441 bp digoxygenin-labeled PCR product gave strong, specific reactions with in situ hybridization and with hybridization blots. In contrast, negative results were obtained using DNA from all other pathogens tested and from DNA of P. monodon. Supernatant solution from boiled, fresh shrimp fecal and postlarval samples homogenized in 0.025% NaOH/0.0125% SDS could be used to detect as little as 0.1 pg HPVmon DNA by the PCR reaction. By dot blot hybridization, a visible signal was obtained with purified HPVmon DNA at 0.01 pg, but detection in spiked feces and postlarval samples was only 1 and 0.1 pg, respectively.     

Fidelity of enzymatic ligation for DNA computing.

We describe a convenient assay for rapid qualitative evaluation of hybridization/ligation fidelity. The approach uses randomized probe strands of DNA and restriction enzyme digestion after amplification of reaction products by the polymerase chain reaction (PCR). We report ligation efficiencies and fidelities of two DNA ligases, T4 DNA ligase and Thermus aquaticus (Taq) DNA ligase, over a range of temperatures.     

Multienzyme-nanoparticles amplification for sensitive virus genotyping in microfluidic microbeads array using Au nanoparticle probes and quantum dots as labels

A novel microfluidic device with microbeads array was developed and sensitive genotyping of human papillomavirus was demonstrated using a multiple-enzyme labeled oligonucleotide-Au nanoparticle bioconjugate as the detection tool. This method utilizes microbeads as sensing platform that was functionalized with the capture probes and modified electron rich proteins, and uses the horseradish peroxidase (HRP)-functionalized gold nanoparticles as label with a secondary DNA probe. The functionalized microbeads were independently introduced into the arrayed chambers using the loading chip slab. A single channel was used to generate weir structures to confine the microbeads and make the beads array accessible by microfluidics. Through "sandwich" hybridization, the enzyme-functionalized Au nanoparticles labels were brought close to the surface of microbeads. The oxidation of biotin-tyramine by hydrogen peroxide resulted in the deposition of multiple biotin moieties onto the surface of beads. This deposition is markedly increased in the presence of immobilized electron rich proteins. Streptavidin-labeled quantum dots were then allowed to bind to the deposited biotin moieties and displayed the signal. Enhanced detection sensitivity was achieved where the large surface area of Au nanoparticle carriers increased the amount HRP bound per sandwiched hybridization. The on-chip genotyping method could discriminate as low as 1fmol/L (10zmol/chip, SNR>3) synthesized HPV oligonucleotides DNA. The chip-based signal enhancement of the amplified assay resulted in 1000 times higher sensitivity than that of off-chip test. In addition, this on-chip format could discriminate and genotype 10copies/μL HPV genomic DNA using the PCR products. These results demonstrated that this on-chip approach can achieve highly sensitive detection and genotyping of target DNA and can be further developed for detection of disease-related biomolecules at the lowest level at their earliest incidence.