Actin-based motility is sufficient for bacterial membrane protrusion formation and host cell uptake

Shigella flexneri replicates in the cytoplasm of host cells, where it nucleates host cell actin filaments at one pole of the bacterial cell to form a 'comet tail' that propels the bacterium through the host's cytoplasm. To determine whether the ability to move by actin-based motility is sufficient for subsequent formation of membrane-bound protrusions and intercellular spread, we conferred the ability to nucleate actin on a heterologous bacterium, Escherichia coli . Previous work has shown that IcsA (VirG), the molecule that is necessary and sufficient for actin nucleation and actin-based motility, is distributed in a unipolar fashion on the surface of S. flexneri . Maintenance of the unipolar distribution of IcsA depends on both the S. flexneri outer membrane protease IcsP (SopA) and the structure of the lipopolysaccharide (LPS) in the outer membrane. We co-expressed IcsA and IcsP in two strains of E. coli that differed in their LPS structures. The E. coli were engineered to invade host cells by expression of invasin from Yersinia pseudotuberculosis and to escape the phagosome by incubation in purified listeriolysin O (LLO) from Listeria monocytogenes . All E. coli strains expressing IcsA replicated in host cell cytoplasm and moved by actin-based motility. Actin-based motility alone was sufficient for the formation of membrane protrusions and uptake by recipient host cells. The presence of IcsP and an elaborate LPS structure combined to enhance the ability of E. coli to form protrusions at the same frequency as S. flexneri , quantitatively reconstituting this step in pathogen intercellular spread in a heterologous organism. The frequency of membrane protrusion formation across all strains tested correlates with the efficiency of unidirectional actin-based movement, but not with bacterial speed.     

IcsA surface presentation in Shigella flexneri requires the periplasmic chaperones DegP, Skp, and SurA

A Shigella flexneri degP mutant, which was defective for plaque formation in Henle cell monolayers, had a reduced amount of IcsA detectable on the bacterial surface with antibody. However, the mutant secreted IcsA to the outer membrane at wild-type levels. This suggests that IcsA adopts an altered conformation in the outer membrane of the degP mutant with reduced exposure on the cell surface. IcsA is, therefore, unlikely to be accessible to actin-nucleating proteins within the eukaryotic cell cytoplasm, which is required for bacterial movement within the host cell and cell-to-cell spread. The degP mutant was somewhat more sensitive to detergents, antibiotics, and the antimicrobial peptide magainin, indicating that the degP phenotype was not limited to IcsA surface presentation. The plaque defect of the degP mutant, which is independent of DegP protease activity, was suppressed by overexpression of the periplasmic chaperone Skp but not by SurA. S. flexneri skp and surA mutants failed to form plaques in Henle cell monolayers and were defective in cell surface presentation and polar localization of IcsA. Therefore, the three periplasmic folding factors DegP, Skp, and SurA were all required for IcsA localization and plaque formation by S. flexneri.     

Multicopy icsA is able to suppress the virulence defect caused by the wzz(SF) mutation in Shigella flexneri

The lipopolysaccharides (LPS) of Shigella flexneri are important for virulence and their O antigen (Oag) polysaccharide chains affect IcsA (VirG)-mediated actin-based motility (ABM) within mammalian cells. S. flexneri 2a 2457T has smooth LPS whose Oag chains have two modal lengths (short (S)-type and very long (VL)-type), and has IcsA predominantly located at one pole on its cell surface. A S. flexneri 2457T wzz(SF) mutant (RMA696) has VL-type Oag but not S-type Oag chains, less IcsA detectable by immunofluorescence on its cell surface, reduced virulence and defective ABM. Introduction of a plasmid encoding IcsA into S. flexneri wzz(SF) showed that multicopy icsA could suppress the virulence defects (Sereny reaction, HeLa cell monolayer plaquing, and F-actin comet tail formation) caused by the wzz(SF) mutation suggesting that the VL-type Oag chains were masking IcsA and limiting the amount available to initiate ABM.     

SopA, the outer membrane protease responsible for polar localization of IcsA in Shigella flexneri

The spreading ability of Shigella flexneri , a facultative intracellular Gram-negative bacterium, within the host-cell cytoplasm is the result of directional assembly and accumulation of actin filaments at one pole of the bacterium. IcsA/VirG, the 120 kDa outer membrane protein that is required for intracellular motility, is located at the pole of the bacterium where actin polymerization occurs. Bacteria growing in laboratory media and within infected cells release a certain proportion of the surface-exposed IcsA after proteolytic cleavage. In this study, we report the characterization of the sopA gene which is located on the virulence plasmid and encodes the protein responsible for the cleavage of IcsA. The deduced amino acid sequence of SopA exhibits 60% identity with those of the OmpT and OmpP outer membrane proteases of Escherichia coli . The construction and phenotypic characterization of a sopA mutant demonstrated that SopA is required for exclusive polar localization of IcsA on the bacterial surface and proper expression of the motility phenotype in infected cells.     

Cleavage of Shigella surface protein VirG occurs at a specific site, but the secretion is not essential for intracellular spreading.

The large plasmid-encoded outer membrane protein VirG (IcsA) of Shigella flexneri is essential for bacterial spreading by eliciting polar deposition of filamentous actin (F-actin) in the cytoplasm of epithelial cells. Recent studies have indicated that VirG is located at one pole on the surface of the bacterium and secreted into the culture supernatant and that in host cells it is localized along the length of the F-actin tail. The roles of these VirG phenotypes in bacterial spreading still remain to be elucidated. In this study, we examined the surface-exposed portion of the VirG protein by limited trypsin digestion of S. flexneri YSH6000 and determined the sites for VirG processing during secretion into the culture supernatant. Our results indicated that the 85-kDa amino-terminal portion of VirG is located on the external side of the outer membrane, while the 37-kDa carboxy-terminal portion is embedded in it. The VirG cleavage required for release of the 85-kDa protein into the culture supernatant occurred at the Arg-Arg bond at positions 758 to 759. VirG-specific cleavage was observed in Shigella species and enteroinvasive Escherichia coli, which requires an as yet unidentified protease activity governed by the virB gene on the large plasmid. To investigate whether the VirG-specific cleavage occurring in extracellular and intracellular bacteria is essential for VirG function in bacterial spreading, the Arg-Arg cleavage site was modified to an Arg-Asp or Asp-Asp bond. The virG mutants thus constructed were capable of unipolar deposition of VirG on the bacterial surface but were unable to cleave VirG under in vitro or in vivo conditions. However, these mutants were still capable of eliciting aggregation of F-actin at one pole, spreading into adjacent cells, and giving rise to a positive Sereny test. Therefore, the ability to cleave and secrete VirG in Shigella species is not a prerequisite for intracellular spreading.     

Mutagenesis of the Shigella flexneri autotransporter IcsA reveals novel functional regions involved in IcsA biogenesis and recruitment of host neural Wiscott-Aldrich syndrome protein

The IcsA (VirG) protein of Shigella flexneri is a polarly localized, outer membrane protein that is essential for virulence. Within host cells, IcsA activates the host actin regulatory protein, neural Wiskott-Aldrich syndrome protein (N-WASP), which in turn recruits the Arp2/3 complex, which nucleates host actin to form F-actin comet tails and initiate bacterial motility. Linker insertion mutagenesis was undertaken to randomly introduce 5-amino-acid in-frame insertions within IcsA. Forty-seven linker insertion mutants were isolated and expressed in S. flexneri Delta icsA strains. Mutants were characterized for IcsA protein production, cell surface expression and localization, intercellular spreading, F-actin comet tail formation, and N-WASP recruitment. Using this approach, we have identified a putative autochaperone region required for IcsA biogenesis, and our data suggest an additional region, not previously identified, is required for N-WASP recruitment.     

Diversion of cytoskeletal processes by Shigella during invasion of epithelial cells

Shigella, the causative agent of bacillar dysentery, invades colonic epithelial cells and moves intracellularly to spread from cell to cell. The processes of Shigella entry, determined by the Ipa proteins, and of actin-based motility, dependent on the IcsA/VirG protein, represent different levels of bacterial manipulation of the cell cytoskeleton.     

The making of a gradient: IcsA (VirG) polarity in Shigella flexneri

The generation and maintenance of subcellular organization in bacteria is critical for many cell processes and properties, including growth, structural integrity and, in pathogens, virulence. Here, we investigate the mechanisms by which the virulence protein IcsA (VirG) is distributed on the bacterial surface to promote efficient transmission of the bacterium Shigella flexneri from one host cell to another. The outer membrane protein IcsA recruits host factors that result in actin filament nucleation and, when concentrated at one bacterial pole, promote unidirectional actin-based motility of the pathogen. We show here that the focused polar gradient of IcsA is generated by its delivery exclusively to one pole followed by lateral diffusion through the outer membrane. The resulting gradient can be modified by altering the composition of the outer membrane either genetically or pharmacologically. The gradient can be reshaped further by the action of the protease IcsP (SopA), whose activity we show to be near uniform on the bacterial surface. Further, we report polar delivery of IcsA in Escherichia coli and Yersinia pseudotuberculosis, suggesting that the mechanism for polar delivery of some outer membrane proteins is conserved across species and that the virulence function of IcsA capitalizes on a more global mechanism for subcellular organization.     

Outer Membrane Protein A (OmpA): A New Player in Shigella flexneri Protrusion Formation and Inter-Cellular Spreading

Outer membrane protein A (OmpA) is a multifaceted predominant outer membrane protein of Escherichia coli and other Enterobacteriaceae whose role in the pathogenesis of various bacterial infections has recently been recognized. Here, the role of OmpA on the virulence of Shigella flexneri has been investigated. An ompA mutant of wild-type S. flexneri 5a strain M90T was constructed (strain HND92) and it was shown to be severely impaired in cell-to-cell spreading since it failed to plaque on HeLa cell monolayers. The lack of OmpA significantly reduced the levels of IcsA while the levels of cell associated and released IcsP-cleaved 95 kDa amino-terminal portion of the mature protein were similar. Nevertheless, the ompA mutant displayed IcsA exposed across the entire bacterial surface. Surprisingly, the ompA mutant produced proper F-actin comet tails, indicating that the aberrant IcsA exposition at bacterial lateral surface did not affect proper activation of actin-nucleating proteins, suggesting that the absence of OmpA likely unmasks mature or cell associated IcsA at bacterial lateral surface. Moreover, the ompA mutant was able to invade and to multiply within HeLa cell monolayers, although internalized bacteria were found to be entrapped within the host cell cytoplasm. We found that the ompA mutant produced significantly less protrusions than the wild-type strain, indicating that this defect could be responsible of its inability to plaque. Although we could not definitely rule out that the ompA mutation might exert pleiotropic effects on other S. flexneri genes, complementation of the ompA mutation with a recombinant plasmid carrying the S. flexneri ompA gene clearly indicated that a functional OmpA protein is required and sufficient for proper IcsA exposition, plaque and protrusion formation. Moreover, an independent ompA mutant was generated. Since we found that both mutants displayed identical virulence profile, these results further supported the findings presented in this study.     

Unipolar localization and ATPase activity of IcsA, a Shigella flexneri protein involved in intracellular movement.

Shigella flexneri uses elements of the host cell cytoskeleton to move within cells and from cell to cell. IcsA, an S. flexneri protein involved in this movement, was purified and studied in vitro. IcsA bound the radiolabelled ATP analog 3'(2')-O-(4-benzoyl)benzoyl-ATP and hydrolyzed ATP. In addition, the surface localization of IcsA on both extracellular and intracellular shigellae was unipolar. Further, in HeLa cells infected with shigellae, IcsA antiserum labelled the actin tail throughout its length, thereby suggesting that IcsA interacts with elements within the tail. Localization of IcsA within the tail at a distance from the bacterium would require its secretion; we demonstrate here that in vitro IcsA is secreted into the culture supernatant in a cleaved form.     

Lipopolysaccharide O antigen chains mask IcsA (VirG) in Shigella flexneri

Shigella flexneri 2a strain 2457T lipopolysaccharide (LPS) has O antigen (Oag) chains with two modal lengths (S-type and VL-type), and has IcsA apparently located at one pole on its cell surface. Treatment of Y serotype derivatives of 2457T and RMA696 (2457T wzz(SF)) with Sf6 tailspike protein (TSP) resulted in hydrolysis of Oag chains, and an increase in detection of IcsA by indirect immunofluorescence staining on both the lateral and polar regions of the cell surface. Newly synthesised IcsA expressed from a pBAD promoter in a S. flexneri Y strain was also detected on both the lateral and polar regions of the cell when incubated with TSP prior to immunofluorescence staining. We conclude that IcsA is actually located on both lateral and polar regions of the S. flexneri cell surface, and that LPS Oag chains mask the presence of IcsA by hindering its detection with antibodies. These results have implications for the mechanism of IcsA export. They suggest that while IcsA export is predominantly targeted to the old cell pole, it can also occur on the lateral regions of the cell surface.     

Bacterial actin assembly requires toca-1 to relieve N-wasp autoinhibition

Actin polymerization in the mammalian cytosol can be locally activated by mechanisms that relieve the autoinhibited state of N-WASP, an initiator of actin assembly, a process that also requires the protein Toca-1. Several pathogenic bacteria, including Shigella, exploit this host feature to infect and disseminate efficiently. The Shigella outer membrane protein IcsA recruits N-WASP, which upon activation at the bacterial surface mediates localized actin polymerization. The molecular role of Toca-1 in N-WASP activation during physiological or pathological actin assembly processes in intact mammalian cells remains unclear. We show that actin tail initiation by S. flexneri requires Toca-1 for the conversion of N-WASP from a closed inactive conformation to an open active one. While N-WASP recruitment is dependent on IcsA, Toca-1 recruitment is instead mediated by S. flexneri type III secretion effectors. Thus, S. flexneri independently hijacks two nodes of the N-WASP actin assembly pathway to initiate localized actin tail assembly.     

Shigella interactions with the actin cytoskeleton in the absence of Ena/VASP family proteins

Shigella move through the cytosol of infected cells by assembly of a propulsive actin tail at one end of the bacterium. Vasodilator-stimulated phosphoprotein (VASP), a member of the Ena/VASP family of proteins, is important in cellular actin dynamics and is present on intracellular Shigella. VASP binds both profilin, an actin monomer-binding protein, and vinculin, a component of intercellular contacts that also binds the Shigella actin assembly protein IcsA. It has been postulated that VASP might serve as a linker between vinculin and profilin on intracellular Shigella, thereby delivering profilin to the Shigella actin assembly machinery. We show that Shigella actin-based motility is unaltered in cells that are deficient for the Ena/VASP family of proteins. In these cells, Shigella form normal-appearing actin tails and move at rates that are comparable to the rates of bacterial movement in Ena/VASP-deficient cells complemented with the Ena/VASP family member Mena. Finally, whereas vinculin can bind the Arp2/3 complex, we show that Arp2/3 recruitment to Shigella is not correlated with vinculin recruitment, indicating that the role of vinculin in Shigella motility is not recruitment of Arp2/3. Thus, although VASP is recruited to the surface of intracellular Shigella, it is not essential for Shigella actin-based motility.     

Actin-based bacterial motility: towards a definition of the minimal requirements

At the border line between microbiology and cell biology, the spectacular capacity o f some intracellular bacterial pathogens, including Listeria monocytogenes, Shigella flexneri and several Rickettsias, to use actin polymerization as a driving force for intracellular movement, cell-to-cell spreading and dissemination within the infected tissue is being increasingly studied. Now that it is possible to manipulate the bacterial surface proteins involved in this process - ActA o f L. monocytogenes and IcsA of S. flexneri - these bacterial systems are providing experimental models in which to investigate the role o f actin filament dynamics in cell motility.     

Regulation of O-antigen chain length is required for Shigella flexneri virulence

It is shown that Shigella flexneri maintains genetic control over the modal chain length of the O-antigen polysaccharide chains of its lipopolysaccharide (LPS) molecules because such a distribution is required for virulence. The effect of altering O-antigen chain length on S. flexneri virulence was investigated by inserting a kanamycin (Km)-resistance cassette into the rol gene (controlling the modal O-antigen chain length distribution), and into the rfbD gene, whose product is needed for synthesis of dTDP-rhamnose (the precursor of rhamnose in the O-antigen). The mutations had the expected effect on LPS structure. The rol ::Km mutation was impaired in the ability to elicit keratoconjunctivitis, as determined by the Serény test. The rol ::Km and rfbD ::Km mutations prevented plaque formation on HeLa cells, but neither mutation affected the ability of S. flexneri to invade and replicate in HeLa cells. Microscopy of bacteria-infected HeLa cells stained with fluorescein isothiocyanate (FITC)-phalloidin demonstrated that both the rol ::Km and rfbD ::Km mutants were defective in F-actin tail formation: the latter mutant showed distorted F-actin tails. Plasma-membrane protrusions were occasionally observed. Investigation of the location of IcsA (required for F-actin tail formation) on the cell surface by immunofluorescence and immunogold electron microscopy showed that while most rol mutant bacteria produced little or no cell-surface IcsA, 10% resembled the parental bacterial cell (which had IcsA at one cell pole; the rfbD mutant had IcsA located over its entire cell surface although it was more concentrated at one end of the cell). That the O-antigen chains of the rol ::Km mutant did not mask the IcsA protein was demonstrated by using the endorhamnosidase activity of Sf6c phage to digest the O-antigen chains, and comparing untreated and Sf6c-treated cells by immunofluorescence with anti-IcsA serum.     

Shigella flexneri regulates tight junction-associated proteins in human intestinal epithelial cells

Shigella spp. are a group of Gram-negative enteric bacilli that cause acute dysentery in humans. We demonstrate that Shigella flexneri has evolved the ability to regulate functional components of tight junctions after interaction at the apical and basolateral pole of model intestinal epithelia. In the regulation of tight junctional protein assemblies, S. flexneri can engage serotype-specific mechanisms, which targets not only expression, but also cellular distribution and membrane association of components of tight junctions. Distinct mechanisms resulting in the regulation of tight junction-associated proteins are initiated after either apical or basolateral interactions. S. flexneri serotype 2a has the ability to remove claudin-1 from Triton X-insoluble protein fractions upon apical exposure to T-84 cell monolayers. S. flexneri serotype 2a and 5, but not the non-invasive Escherichia coli strain F-18, share the ability to regulate expression of ZO-1, ZO-2, E-cadherin and to dephosphorylate occludin. The disruption of tight junctions is dependent on direct interaction of living Shigella with intestinal epithelial cells and is supported by heat-stable secreted bacterial products. Intestinal epithelial cells have the ability to compensate in part for S. flexneri induced regulation of tight junction-associated proteins.     

Neural Wiskott-Aldrich syndrome protein is implicated in the actin-based motility of Shigella flexneri.

Shigella, the causative agent of bacillary dysentery, is capable of directing its own movement in the cytoplasm of infected epithelial cells. The bacterial surface protein VirG recruits host components mediating actin polymerization, which is thought to serve as the propulsive force. Here, we show that neural Wiskott-Aldrich syndrome protein (N-WASP), which is a critical target for filopodium formation downstream of Cdc42, is required for assembly of the actin tail generated by intracellular S.flexneri. N-WASP accumulates at the front of the actin tail and is capable of interacting with VirG in vitro and in vivo, a phenomenon that is not observed in intracellular Listeria monocytogenes. The verprolin-homology region in N-WASP was required for binding to the glycine-rich repeats domain of VirG, an essential domain for recruitment of F-actin on intracellular S.flexneri. Overexpression of a dominant-negative N-WASP mutant greatly inhibited formation of the actin tail by intracellular S.flexneri. Furthermore, depletion of N-WASP from Xenopus egg extracts shut off Shigella actin tail assembly, and this was restored upon addition of N-WASP protein, suggesting that N-WASP is a critical host factor for the assembly of the actin tail by intracellular Shigella.     

The development of a FACS-based strategy for the isolation of Shigella flexneri mutants that are deficient in intercellular spread

In the disease course of bacillary dysentery, pathogenic Shigella flexneri invade colonic epithelial cells and spread both within and between host cells. The ability to spread intercellularly allows the organism to infect an entire epithelial layer without significant contact with the extracellular milieu. Using fluorescence activated cell sorter (FACS)-based technology, we developed a rapid and powerful selection strategy for the isolation of S. flexneri mutants that are unable to spread from cell to cell. The majority of mutants identified using this strategy harbour mutations that affect the structure of their lipopolysaccharide or the ability of the bacteria to move intracellularly via actin-based motility; both factors have previously been shown to be essential for cell-to-cell spread. However, using a modified strategy that eliminated both of these types of mutants, we identified several mutants that provide us with evidence that bacterial proteins of the type III secretion system, which are essential for bacterial entry into host cells, also play a role in cell-to-cell spread.     

Activation of the CDC42 effector N-WASP by the Shigella flexneri IcsA protein promotes actin nucleation by Arp2/3 complex and bacterial actin-based motility.

To propel itself in infected cells, the pathogen Shigella flexneri subverts the Cdc42-controlled machinery responsible for actin assembly during filopodia formation. Using a combination of bacterial motility assays in platelet extracts with Escherichia coli expressing the Shigella IcsA protein and in vitro analysis of reconstituted systems from purified proteins, we show here that the bacterial protein IcsA binds N-WASP and activates it in a Cdc42-like fashion. Dramatic stimulation of actin assembly is linked to the formation of a ternary IcsA-N-WASP-Arp2/3 complex, which nucleates actin polymerization. The Arp2/3 complex is essential in initiation of actin assembly and Shigella movement, as previously observed for Listeria monocytogenes. Activation of N-WASP by IcsA unmasks two domains acting together in insertional actin polymerization. The isolated COOH-terminal domain of N-WASP containing a verprolin-homology region, a cofilin-homology sequence, and an acidic terminal segment (VCA) interacts with G-actin in a unique profilin-like functional fashion. Hence, when N-WASP is activated, its COOH-terminal domain feeds barbed end growth of filaments and lowers the critical concentration at the bacterial surface. On the other hand, the NH(2)-terminal domain of N-WASP interacts with F-actin, mediating the attachment of the actin tail to the bacterium surface. VASP is not involved in Shigella movement, and the function of profilin does not require its binding to proline-rich regions.