Relation between nuclear envelope and nuclear lamina in nuclear assembly in vitro

Xenopus laevis egg extracts cell-free nuclear assembly system was used as an experimental model to study the process of nuclear lamina assembly in nuclear reconstitution in vitro. The experimental results showed that lamin was involved in the nuclear assembly in vitro. The assembly of nuclear lamina was preceded by the assembly of nuclear matrix, and probably, inner nuclear matrix assembly provided the basis for nuclear lamina assembly. Inhibition of normal assembly of nuclear lamina, by preincubating egg extracts cell-free system with anti-lamin antibodies, resulted in abnormal assembly of nuclear envelope, suggesting that nuclear envelope assembly is closely associated with nuclear lamina assembly.     

Relation between nuclear envelope and nuclear lamina in nuclear assemblyin vitro

Xenopus laevis egg extracts cell-free nuclear assembly system was used as an experimental model to study the process of nuclear lamina assembly in nuclear reconstitutionin vitro. The experimental results showed that lamin was involved in the nuclear assemblyin vitro. The assembly of nuclear lamina was preceded by the assembly of nuclear matrix, and probably, inner nuclear matrix assembly provided the basis for nuclear lamina assembly. Inhibition of normal assembly of nuclear Iknina, by preincubating egg extracts cell-free system with anti-lamin antibodies, resulted in abnormal assembly of nuclear envelope, suggesting that nuclear envelope assembly is closely associated with nuclear lamina assembly.     

Relation between nuclear envelope and nuclear lamina in nuclear assembly in vitro

Xenopus laevis egg extracts cell-free nuclear assembly system was used as an experimental model to study the process of nuclear lamina assembly in nuclear reconstitutionin vitro. The experimental results showed that lamin was involved in the nuclear assemblyin vitro. The assembly of nuclear lamina was preceded by the assembly of nuclear matrix, and probably, inner nuclear matrix assembly provided the basis for nuclear lamina assembly. Inhibition of normal assembly of nuclear Iknina, by preincubating egg extracts cell-free system with anti-lamin antibodies, resulted in abnormal assembly of nuclear envelope, suggesting that nuclear envelope assembly is closely associated with nuclear lamina assembly. Project supported by the National Natural Science Foundation of China.     

Microtubule assembly affected by the presence of denatured tubulin

The effects of denatured tubulin on microtubule assembly from active phosphocellulose-tubulin have been studied. The presence of denatured tubulin resulted in an inhibition of the assembly and in the increase of the critical concentration to trigger the assembly. Inhibition of both the rate and extent of microtubule assembly was dependent on denatured tubulin concentration. This perturbation of microtubule assembly by denatured tubulin is likely to be specific as non-microtubule proteins did not significantly affect the assembly.     

四种常用高通量测序拼接软件的应用比较

新一代测序平台的诞生推动了对全基因组鸟枪法测序数据的拼接算法和软件的研究,自2005年以来多种用于高通量测序的序列拼接软件已经被开发出来,并且在不断地进行改进以提高拼接效果.本文利用目前广泛使用的高通量测序拼接软件Velvet、AbySS、SOAPdenovo和CLC Genomic Workbench分别对本试验室分离的一株噬菌体IME08的高通量测序结果进行拼接,介绍这几种拼接软件的安装使用及参数优化,并对不同软件的拼接结果进行比较,针对不同的拼接软件得到优化的拼接参数,可为其他研究人员使用上述软件提供参考借鉴.     

Assembly of the nuclear pore: biochemically distinct steps revealed with NEM, GTP gamma S, and BAPTA

A key event in nuclear formation is the assembly of functional nuclear pores. We have used a nuclear reconstitution system derived from Xenopus eggs to examine the process of nuclear pore assembly in vitro. With this system, we have identified three reagents which interfere with nuclear pore assembly, NEM, GTP gamma S, and the Ca++ chelator, BAPTA. These reagents have allowed us to determine that the assembly of a nuclear pore requires the prior assembly of a double nuclear membrane. Inhibition of nuclear vesicle fusion by pretreatment of the membrane vesicle fraction with NEM blocks pore complex assembly. In contrast, NEM treatment of already fused double nuclear membranes does not block pore assembly. This indicates that NEM inhibits a single step in pore assembly--the initial fusion of vesicles required to form a double nuclear membrane. The presence of GTP gamma S blocks pore assembly at two distinct steps, first by preventing fusion between nuclear vesicles, and second by blocking a step in pore assembly that occurs on already fused double nuclear membranes. Interestingly, when the Ca2+ chelator BAPTA is added to a nuclear assembly reaction, it only transiently blocks nuclear vesicle fusion, but completely blocks nuclear pore assembly. This results in the formation of a nucleus surrounded by a double nuclear membrane, but devoid of nuclear pores. To order the positions at which GTP gamma S and BAPTA interfere with pore assembly, a novel anchored nuclear assembly assay was developed. This assay revealed that the BAPTA-sensitive step in pore assembly occurs after the second GTP gamma S-sensitive step. Thus, through use of an in vitro nuclear reconstitution system, it has been possible to biochemically define and order multiple steps in nuclear pore assembly.     

Applying Molecular Crowding Models to Simulations of Virus Capsid Assembly In Vitro

Virus capsid assembly has been widely studied as a biophysical system, both for its biological and medical significance and as an important model for complex self-assembly processes. No current technology can monitor assembly in detail and what information we have on assembly kinetics comes exclusively from in vitro studies. There are many differences between the intracellular environment and that of an in vitro assembly assay, however, that might be expected to alter assembly pathways. Here, we explore one specific feature characteristic of the intracellular environment and known to have large effects on macromolecular assembly processes: molecular crowding. We combine prior particle simulation methods for estimating crowding effects with coarse-grained stochastic models of capsid assembly, using the crowding models to adjust kinetics of capsid simulations to examine possible effects of crowding on assembly pathways. Simulations suggest a striking difference depending on whether or not a system uses nucleation-limited assembly, with crowding tending to promote off-pathway growth in a nonnucleation-limited model but often enhancing assembly efficiency at high crowding levels even while impeding it at lower crowding levels in a nucleation-limited model. These models may help us understand how complicated assembly systems may have evolved to function with high efficiency and fidelity in the densely crowded environment of the cell.     

An update on complex I assembly: the assembly of players

Defects in Complex I assembly is one of the emerging underlying causes of severe mitochondrial disorders. The assembly of Complex I has been difficult to understand due to its large size, dual genetic control and the number of proteins involved. Mutations in Complex I subunits as well as assembly factors have been reported to hinder its assembly and give rise to a range of mitochondria disorders. In this review, we summarize the recent progress made in understanding the Complex I assembly pathway. In particularly, we focus on the known as well as novel assembly factors and their role in assembly of Complex I and human disease.     

DNA组装技术

DNA组装是合成生物学研究的核心技术。随着合成生物学的发展,研究者开发了依赖于DNA聚合酶或DNA连接酶的不同DNA组装技术;为了降低组装成本和便于实现DNA组装的自动化,也发展了一些非酶依赖的DNA组装技术;而几百kb到Mb的大片段DNA的组装则多数依赖于微生物体内重组。文中主要综述了酶依赖、非酶依赖和体内同源重组三类DNA组装技术及其发展情况。     

Capsid assembly of dsDNA viruses

Capsid assembly has been investigated for many dsDNA viruses. Much is known about assembly pathways for these viruses and information is now emerging about the protein/protein and protein/DNA interactions that regulate these pathways. Common themes include progressive transitions in the properties of the capsid subunits as assembly proceeds and the use of accessory factors to aid assembly. Other assembly strategies, such as packaging DNA into a preformed capsid or assembling capsids from subunit oligomers are shared among some but not all viruses of this group. Despite the many similarities, there are sufficient fundamental differences in assembly strategies that it is not possible to describe them all as variations on a single assembly theme.     

第二、三代基因组测序数据混合拼接软件综述

DNA测序是生物信息学研究的重要内容之一,对测序序列的从头拼接是其中非常基础而重要的步骤.随着测序技术的不断更新,新的第三代测序数据拥有更长的序列长度、高错误率等性质,针对这些性质,同时使用二代、三代测序数据进行混合拼接是获得更好的拼接结果一种重要方式.本文介绍了现有的混合拼接软件的基本原理,并比较了不同软件拼接结果....     

Zinc ions trigger conformational change and oligomerization of hepatitis B virus capsid protein

Assembly of virus particles in infected cells is likely to be a tightly regulated process. Previously, we found that in vitro assembly of hepatitis B virus (HBV) capsid protein is highly dependent on protein and NaCl concentration. Here we show that micromolar concentrations of Zn2+ are sufficient to initiate assembly of capsid protein, whereas other mono- and divalent cations elicited assembly only at millimolar concentrations, similar to those required for NaCl-induced assembly. Altered intrinsic protein fluorescence and highly cooperative binding of at least four Zn2+ ions (KD approximately 7 microM) indicated that binding induced a conformational change in capsid protein. At 37 degrees C, Zn2+ enhanced the initial rate of assembly and produced normal capsids, but it did not alter the extent of assembly at equilibrium. Assembly mediated by high zinc concentrations (> or =300 microM) yielded few capsids but produced a population of oligomers recognized by capsid-specific antibodies, suggesting a kinetically trapped assembly reaction. Comparison of kinetic simulations to in vitro assembly reactions leads us to suggest that kinetic trapping was due to the enhancement of the nucleation rate relative to the elongation rate. Zinc-induced HBV assembly has hallmarks of an allosterically regulated process: ligand binding at one site influences binding at other sites (cooperativity) indicating that binding is associated with conformational change, and binding of ligand alters the biological activity of assembly. We conclude that zinc binding enhances the kinetics of assembly by promoting formation of an intermediate that is readily consumed in the reaction. Free zinc ions may not be the true in vivo activator of assembly, but they provide a model for regulation of assembly.     

Kinetics and regulation of de novo centriole assembly. Implications for the mechanism of centriole duplication

BACKGROUND: Centriole duplication is a key step in the cell cycle whose mechanism is completely unknown. Why new centrioles always form next to preexisting ones is a fundamental question. The simplest model is that preexisting centrioles nucleate the assembly of new centrioles, and that although centrioles can in some cases form de novo without this nucleation, the de novo assembly mechanism should be too slow to compete with normal duplication in order to maintain fidelity of centriole duplication. RESULTS: We have measured the rate of de novo centriole assembly in vegetatively dividing cells that normally always contain centrioles. By using mutants of Chlamydomonas that are defective in centriole segregation, we obtained viable centrioleless cells that continue to divide, and find that within a single generation, 50% of these cells reacquire new centrioles by de novo assembly. This suggests that the rate of de novo assembly is approximately half the rate of templated duplication. A mutation in the VFL3 gene causes a complete loss of the templated assembly pathway without eliminating de novo assembly. A mutation in the centrin gene also reduced the rate of templated assembly. CONCLUSIONS: These results suggest that there are two pathways for centriole assembly, namely a templated pathway that requires preexisting centrioles to nucleate new centriole assembly, and a de novo assembly pathway that is normally turned off when centrioles are present.     

Equipment selection and task assignment for multiproduct assembly system design

A multiproduct assembly system produces a family of similar products, where the assembly of each product entails an ordered set of tasks. An assembly system consists of a sequence of workstations. For each workstation, we assign a subset of the assembly tasks to be performed at the workstation and select the type of assembly equipment or resource to be used by the workstation. The assembly of each product requires a visit to each workstation in the fixed sequence. The problem of system design is to find the system that is capable of producing all the products in the desired volumes at minimum cost. The system cost includes the fixed capital costs for the assembly equipment and tools and the variable operating costs for the various workstations. We present and illustrate an optimization procedure that assigns tasks to workstations and selects assembly equipment for each workstation.     

Snapshots of pre-rRNA structural flexibility reveal eukaryotic 40S assembly dynamics at nucleotide resolution

Ribosome assembly in eukaryotes involves the activity of hundreds of assembly factors that direct the hierarchical assembly of ribosomal proteins and numerous ribosomal RNA folding steps. However, detailed insights into the function of assembly factors and ribosomal RNA folding events are lacking. To address this, we have developed ChemModSeq, a method that combines structure probing, high-throughput sequencing and statistical modeling, to quantitatively measure RNA structural rearrangements during the assembly of macromolecular complexes. By applying ChemModSeq to purified 40S assembly intermediates we obtained nucleotide-resolution maps of ribosomal RNA flexibility revealing structurally distinct assembly intermediates and mechanistic insights into assembly dynamics not readily observed in cryo-electron microscopy reconstructions. We show that RNA restructuring events coincide with the release of assembly factors and predict that completion of the head domain is required before the Rio1 kinase enters the assembly pathway. Collectively, our results suggest that 40S assembly factors regulate the timely incorporation of ribosomal proteins by delaying specific folding steps in the 3′ major domain of the 20S pre-ribosomal RNA.     

A method for in vitro assembly of hepatitis C virus core protein and for screening of inhibitors

The assembly of hepatitis C virus (HCV) is not well understood. We investigated HCV nucleocapsid assembly in vitro and the role of electrostatic/hydrophobic interactions in this process. We developed a simple and rapid in vitro assay in which the progress of assembly is monitored by measuring an increase in turbidity, thereby allowing the kinetics of assembly to be determined. Assembly is performed using a truncated HCV core (C1-82), containing the minimal assembly domain, purified from Escherichia coli. The increase in turbidity is linked to the formation of nucleocapsid-like particles (NLPs) in solution, and nucleic acids are essential to initiate nucleocapsid assembly under the experimental conditions used. The sensitivity of NLP formation to salt strongly suggests that electrostatic forces govern in vitro assembly. Mutational analysis of C1-82 demonstrated that it is the global positive charge of C1-82 rather than any specific basic residue that is important for the assembly process. Our in vitro assembly assay provides an easy and efficient means of screening for assembly inhibitors, and we have identified several inhibitory peptides that could represent a starting point for drug design.     

Ecological rules for the assembly of microbiome communities

Humans and many other hosts establish a diverse community of beneficial microbes anew each generation. The order and identity of incoming symbionts is critical for health, but what determines the success of the assembly process remains poorly understood. Here we develop ecological theory to identify factors important for microbial community assembly. Our method maps out all feasible pathways for the assembly of a given microbiome—with analogies to the mutational maps underlying fitness landscapes in evolutionary biology. Building these “assembly maps” reveals a tradeoff at the heart of the assembly process. Ecological dependencies between members of the microbiota make assembly predictable—and can provide metabolic benefits to the host—but these dependencies may also create barriers to assembly. This effect occurs because interdependent species can fail to establish when each relies on the other to colonize first. We support our predictions with published data from the assembly of the preterm infant microbiota, where we find that ecological dependence is associated with a predictable order of arrival. Our models also suggest that hosts can overcome barriers to assembly via mechanisms that either promote the uptake of multiple symbiont species in one step or feed early colonizers. This predicted importance of host feeding is supported by published data on the impacts of breast milk in the assembly of the human microbiome. We conclude that both microbe to microbe and host to microbe interactions are important for the trajectory of microbiome assembly.

Humans and many other hosts establish a diverse community of beneficial microbes anew each generation, but what determines the success of the assembly process remains poorly understood. This study develops ecological theory that reveals the rules underlying the assembly of such host-associated microbiota.     

Assembly of pure tubulin in the absence of free GTP: effect of magnesium, glycerol, ATP, and the nonhydrolyzable GTP analogues

We describe in vitro microtubule assembly that exhibits, in bulk solution, behavior consistent with the GTP cap model of dynamic instability. Microtubules assembled from pure tubulin in the absence of free nucleotides could undergo one cycle of assembly, but could not sustain an assembly plateau. After the initial peak of assembly was reached and bound E-site GTP hydrolyzed to GDP, the microtubules gradually disassembled. We studied buffer conditions that maximized this disassembly while still allowing robust assembly to take place. While both glycerol and glutamate increased the rate of initial assembly and then slowed disassembly, magnesium promoted initial assembly and, surprisingly, enhanced disassembly. After cooling, a second cycle of assembly was unsuccessful unless GTP or the hydrolyzable GTP analogue GMPCPOP was readded. The nonhydrolyzable GTP analogues GMPPNP and GMPPCP could not support the second assembly cycle in the absence of E-site GTP. Analysis using HPLC found no evidence that GMPPNP, GMPPCP, or ATP could bind to free tubulin, and these nucleotides did not compete with GTP for the E-site. We have, however, demonstrated that the nonhydrolyzable GTP analogues and ATP do have an important effect on microtubule assembly. GMPPNP, GMPPCP, and ATP could each enhance the rate of assembly and stabilize the plateau of assembled microtubules against disassembly, while not binding appreciably to free tubulin. We conclude that these nucleotides, as well as GTP itself, enhance assembly by binding to a site on microtubules that is not present on free, unpolymerized tubulin. We estimate the affinity (KD) of the polymeric site for nucleotide triphosphates to be approximately 10(-4)M.     

Fibronectin's cell-adhesive domain and an amino-terminal matrix assembly domain participate in its assembly into fibroblast pericellular matrix

Fibroblasts organize the modular cell-adhesive glycoprotein fibronectin into a highly structured pericellular matrix by poorly understood mechanisms. Previous studies implicated an amino-terminal domain in matrix assembly and suggested that fibronectin's cell-adhesive domain and the corresponding fibroblast receptor were not involved in this process. To further elucidate the fibronectin region(s) involved in matrix assembly, we mapped a library of proteolytic fragments and antibodies to various fibronectin domains. The fragments and antibodies were used to probe the role of fibronectin's amino-terminal and cell-adhesive domains in a fibroblast matrix assembly assay. We found that fibronectin fragments including the first 25-kDa sequence of fibronectin and antibodies to amino-terminal domains inhibited pericellular matrix assembly. Polyclonal antibodies to the 40-kDa collagen binding domain following the 25-kDa amino-terminal domain also inhibited matrix assembly. However, collagen binding is not required for matrix assembly as neither monoclonals blocking collagen binding nor purified collagen binding domains themselves inhibited matrix assembly. Therefore, the amino-terminal region of fibronectin contains a site important in matrix assembly, and most activity is present in the first 25-kDa of fibronectin. Fibronectin's cell-adhesive domain and the fibroblast receptor binding to this domain also play an important role in fibronectin matrix assembly. Apart from a monoclonal antibody to the amino-terminal domain, only monoclonal antibodies binding to fibronectin's cell-adhesive domain and inhibiting cell adhesion also inhibited matrix assembly. In addition a 105-kDa fragment containing the cell-adhesive domain inhibited matrix assembly. We conclude that at least two discrete and widely separated sites in fibronectin with different binding properties--the carboxyl-terminal fibroblast cell-adhesive domain and an amino-terminal matrix assembly domain localized primarily within the first 25 kDa--are required for fibronectin pericellular matrix assembly by fibroblasts. Fibronectin's cell-adhesive domain and its cell surface-receptor complex appear to be involved in the matrix assembly process prior to a step involving the amino-terminal domain. We believe that this step is likely to be the initiation of cell-associated fibronectin fibril formation by the fibronectin-adhesive-receptor complex.