COMU: scope and limitations of the latest innovation in peptide acyl transfer reagents

The methodology for peptide bond formation is undergoing a continuous evolution where the main actors are being renewed. In recent years, coupling reagents based on the Oxyma scaffold, such as the uronium salt COMU, has been a groundbreaking contribution to the field. The advantages of COMU over classic benzotriazole‐based reagents (HATU, HBTU, HCTU, TBTU) were proven in terms of solubility and coupling efficiency in bulky junctions in our groups and others. However, some aspects of the use of COMU need to be revised and improved, such as the stability of commercial samples in organic solvents, which hampers the compatibility with long synthesis in automated synthesizers. In this review, an overview of the main features and suggestions to improve the use of COMU are presented, along with a discussion on the best conditions for its use in microwave‐assisted peptide robots. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

COMU: A third generation of uronium‐type coupling reagents

COMU is a third generation of uronium‐type coupling reagent based on ethyl 2‐cyano‐2‐(hydroxyimino)acetate (Oxyma) as well as a morpholino carbon skeleton. The presence of the morpholino group has a marked influence on the solubility, stability and reactivity of the reagent. COMU performed extremely well in the presence of only 1 equiv. of base, thereby confirming the effect of the hydrogen bond acceptor in the reaction. The by‐products of COMU are water soluble and easily removed, making it an excellent choice of coupling reagent for solution‐phase peptide synthesis. Finally, COMU shows a less hazardous safety profile than benzotriazole‐based reagents, such as HATU and HBTU, which in addition exhibit unpredictable autocatalytic decompositions and therefore a higher risk of explosion. Furthermore, in contrast to benzotriazole‐based reagents, COMU is significantly less likely to cause allergic reaction. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

Easy parallel screening of reagent stability,quality control,and metrology in solid phase peptide synthesis (SPPS) and peptide couplings for microarrays

Evaluating the stability of coupling reagents, quality control (QC), and surface functionalization metrology are all critical to the production of high quality peptide microarrays. We describe a broadly applicable screening technique for evaluating the fidelity of solid phase peptide synthesis (SPPS), the stability of activation/coupling reagents, and a microarray surface metrology tool. This technique was used to assess the stability of the activation reagent 1‐{[1‐(Cyano‐2‐ethoxy‐2‐oxo‐ethylidenaminooxy)dimethylamino‐morpholinomethylene]}methaneaminiumHexafluorophosphate (COMU) (Sigma‐Aldrich, St. Louis, MO, USA) by SPPS of Leu‐Enkephalin (YGGFL) or the coupling of commercially synthesized YGGFL peptides to (3‐aminopropyl)triethyoxysilane‐modified glass surfaces. Coupling efficiency was quantitated by fluorescence signaling based on immunoreactivity of the YGGFL motif. It was concluded that COMU solutions should be prepared fresh and used within 5 h when stored at ~23 °C and not beyond 24 h if stored refrigerated, both in closed containers. Caveats to gauging COMU stability by absorption spectroscopy are discussed. Commercial YGGFL peptides needed independent QC, due to immunoreactivity variations for the same sequence synthesized by different vendors. This technique is useful in evaluating the stability of other activation/coupling reagents besides COMU and as a metrology tool for SPPS and peptide microarrays. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

In Situ Neutralization in Boc-chemistry Solid Phase Peptide Synthesis

Simple, effective protocols have been developed for manual and machine-assisted Boc-chemistry solid phase peptide synthesis on polystyrene resins. These use in situ neutralization [i.e. neutralization simultaneous with coupling], high concentrations (>0.2 m) of Boc-amino acid-OBt esters plus base for rapid coupling, 100% TFA for rapid Boc group removal, and a single short (30 s) DMF flow wash between deprotection/coupling and between coupling/deprotection. Single 10 min coupling times were used throughout. Overall cycle times were 15 min for manual and 19 min for machine-assisted synthesis (75 residues per day). No racemization was detected in the _.base-catalyzed coupling step. Several side reactions were studied, and eliminated. These included: pyrrolidonecarboxylic acid formation from Gln in hot TFA-DMF; chain-termination by reaction with excess HBTU; and, chain termination by acetylation (from HOAc in commercial Boc-amino acids). The in situ neutralization protocols gave a significant increase in the efficiency of chain assembly, especially for “difficult” sequences arising from sequence-dependent peptide chain aggregation in standard (neutralization prior to coupling) Boc-chemistry SPPS protocols or in Fmoc-chemistry SPPS. Reported syntheses include HIV-1 protease(1–50,Cys.amide), HIV-1 protease(53–99), and the full length HIV-l protease(1–99). Republished with the permission of Blackwell Publishing from International Journal of Peptide Protein Research, volume 40, pp. 180–193, 1992. A preliminary account of this work was presented at the 12th American Peptide Symposium, Cambridge, MA, July 16–21, 1991 (ref. 43). Dedicated to Professor Bruce Merrifield on the occasion of his 70th birthday.     

Assessment of new 6-Cl-HOBt based coupling reagents for peptide synthesis. Part 1: Coupling efficiency study

Summary The efficiency of a series of well-known coupling reagents (TBTU, HATU, and PyBOP) and of newin situ activating reagents (TCTU, HCTU, and DMTMM) was compared by synthesizing the 65–74 fragment of the Acyl Carrier Protein (H-Val-Gln-Ala-Ala-Ile-Asp-Tyr-Ile-Asn-Gly-NH₂), containing ‘a difficult sequence’, as a test peptide, in a multiple peptide synthesizer. The longer sequence rMOG(35–55) was also synthesized. It was clear that the aminium salts are more efficient than the phosphonium salt (PyBOP) and that the new 6Cl-HOBt based reagents (HCTU and particularly TCTU) are very efficient, while DMTMM appeared to be not suitable for SPPS.     

Re‐evaluating the stability of COMU in different solvents

COMU is uronium‐type coupling reagent based on OxymaPure. It showed several advantages over classical benzotriazole‐based coupling reagents such as higher solubility, water‐soluble byproduct, and monitoring the reaction by changing of color. Although COMU is well known to perform excellent in solution, but its hydrolytic stability in DMF limits its use in automatic peptide synthesizer. Herein, we evaluated the hydrolytic stability of COMU in γ‐valerolactone (GVL), acetonitrile (ACN) and N‐formylmorpholine (NFM) and compared its stability against DMF. The stability of COMU after 24 h was found to be 88 and 89% in GVL and ACN, respectively, when compared in DMF (14%). Further, the demanding Aib‐ACP decapeptide and JR decapeptide were successfully synthesized using COMU dissolved in GVL or ACN while Fmoc amino acids were dissolved in DMF. Copyright © 2017 European Peptide Society and John Wiley & Sons, Ltd.     

Assessment of new 6-Cl-HOBt based coupling reagents for peptide synthesis. Part 1: Coupling efficiency study

The efficiency of a series of well-known coupling reagents (TBTU, HATU, and PyBOP) and of new in situ activating reagents (TCTU, HCTU, and DMTMM) was compared by synthesizing the 65–74 fragment of the Acyl Carrier Protein (H-Val-Gln-Ala-Ala-Ile-Asp-Tyr-Ile-Asn-Gly-NH₂₎, containing `a difficult sequence', as a test peptide, in a multiple peptide synthesizer. The longer sequence rMOG(35–55) was also synthesized. It was clear that the aminium salts are more efficient than the phosphonium salt (PyBOP) and that the new 6Cl-HOBt based reagents (HCTU and particularly TCTU) are very efficient, while DMTMM appeared to be not suitable for SPPS.     

Fast conventional Fmoc solid‐phase peptide synthesis: a comparative study of different activators

The ability to speed up conventional Fmoc solid‐phase peptide synthesis (SPPS) has many advantages including increased productivity. One way to speed up conventional Fmoc SPPS is the choice of activator. Recently, several new activators have been introduced into the market, and they were evaluated along with some older activators for their ability to synthesize a range of peptides with shorter and longer reaction times. It was found that HDMC, PyClock, COMU, HCTU, and HATU worked well at shorter reaction times (2 × 1 min), but PyOxim and TFFH only worked well at longer reaction times. The performance of PyBOP at shorter reaction times was poor only for more difficult sequences. These results are important for selecting an appropriate activator for fast SPPS applications. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Improved Fmoc‐based solid‐phase synthesis of homologous peptide fragments of human and mouse prion proteins

The synthesis of difficult peptide sequences has been a challenge since the very beginning of SPPS. The self‐assembly of the growing peptide chains has been proposed as one of the causes of this synthetic problem. However, there is an increasing need to obtain peptides and proteins that are prone to aggregate. These peptides and proteins are generally associated with diseases known as amyloidoses. We present an efficient SPPS of two homologous peptide fragments of HuPrP (106–126) and MoPrP105–125 based on the use of the PEGA resin combined with proper coupling approaches. These peptide fragments were also studied by CD and TEM to determine their ability to aggregate. On the basis of these results, we support PEG‐based resins as an efficient synthetic tool to prepare peptide sequences prone to aggregate on‐resin. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Microwave‐assisted solid‐phase peptide synthesis at 60 °C: alternative conditions with low enantiomerization

Several conditions have been used in the coupling reaction of stepwise SPPS at elevated temperature (SPPS‐ET), but we have elected the following as our first choice: 2.5‐fold molar excess of 0.04–0.08 M Boc or Fmoc‐amino acid derivative, equimolar amount of DIC/HOBt (1:1) or TBTU/DIPEA (1:3), 25% DMSO/toluene, 60 °C, conventional heating. In this study, aimed to further examine enantiomerization under such condition and study the applicability of our protocols to microwave‐SPPS, peptides containing L ‐Ser, L ‐His, L ‐Cys and/or L ‐Met were manually synthesized traditionally, at 60 °C using conventional heating and at 60 °C using microwave heating. Detailed assessment of all crude peptides (in their intact and/or fully hydrolyzed forms) revealed that, except for the microwave‐assisted coupling of L ‐Cys, all other reactions occurred with low levels of amino acid enantiomerization (<2%). Therefore, herein we (i) provide new evidences that our protocols for SPPS at 60 °C using conventional heating are suitable for routine use, (ii) demonstrate their appropriateness for microwave‐assisted SPPS by Boc and Fmoc chemistries, (iii) disclose advantages and limitations of the three synthetic approaches employed. Thus, this study complements our past research on SPPS‐ET and suggests alternative conditions for microwave‐assisted SPPS. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

In situ neutralization in Boc-chemistry solid phase peptide synthesis. Rapid, high yield assembly of difficult sequences.

Simple, effective protocols have been developed for manual and machine-assisted Boc-chemistry solid phase peptide synthesis on polystyrene resins. These use in situ neutralization [i.e. neutralization simultaneous with coupling], high concentrations (> 0.2 M) of Boc-amino acid-OBt esters plus base for rapid coupling, 100% TFA for rapid Boc group removal, and a single short (30 s) DMF flow wash between deprotection/coupling and between coupling/deprotection. Single 10 min coupling times were used throughout. Overall cycle times were 15 min for manual and 19 min for machine-assisted synthesis (75 residues per day). No racemization was detected in the base-catalyzed coupling step. Several side reactions were studied, and eliminated. These included: pyrrolidonecarboxylic acid formation from Gln in hot TFA-DMF; chain-termination by reaction with excess HBTU; and, chain termination by acetylation (from HOAc in commercial Boc-amino acids). The in situ neutralization protocols gave a significant increase in the efficiency of chain assembly, especially for "difficult" sequences arising from sequence-dependent peptide chain aggregation in standard (neutralization prior to coupling) Boc-chemistry SPPS protocols or in Fmoc-chemistry SPPS. Reported syntheses include HIV-1 protease(1-50,Cys.amide), HIV-1 protease(53-99), and the full length HIV-1 protease(1-99).     

Complete synthesis of the bicyclic ring of a mutacin analog with orthogonally protected lanthionine via solid‐phase intracyclization

Mutacin 1140 (MU1140) is a naturally occurring lantibiotic derived from posttranslational modifications of a ribosomally synthesized peptide during the fermentation of a bacterium called Streptococcus mutans, the etiological agent of dental cavities. A practical approach for chemically synthesizing lantibiotics would be a valuable tool to expand the MU1140 library with additional semisynthetic analogs. In turn, an expanded library may prove useful to explore additional therapeutic indications for this pipeline of novel compounds. In this work, orthogonally protected lanthionine analogs were synthesized via an aziridine ring opening strategy. This lanthionine was utilized to synthesize a cysteamine (Cya) instead of the (S)‐aminovinyl‐D‐cysteine (AviCys) that is naturally found in MU1140. The Cya containing bicyclic C/D ring of MU1140 was synthesized by Fmoc solid‐phase peptide synthesis (SPPS). The linear peptides were synthesized using OPfp ester derivatives and using various common coupling reagents such as COMU and TCTU. The linear peptide was intracyclized with DEPBT to construct the so‐called bicyclic ring C/D. This is the first report on the complete chemical synthesis of the bicyclic C/D ring of a MU1140 analog using orthogonally protected lanthionines using SPPS.     

The production of anti-hexapeptide antibodies which recognize the S7, L6 and L13 ribosomal proteins of Escherichia coli.

Here we report the synthesis of the N-terminal hexapeptide H-Pro-Arg-Arg-Arg-Val-Ile-OH of the E. coli ribosomal protein S7. the C-terminal hexapeptide H-Lys-Glu-Ala-Lys-Lys-Lys-OH of L6 and the C-terminal hexapeptide H-Pro-Gln-Val-Leu-Asp-Ile-OH of L13. All peptides were prepared by SPPS following the Fmoc-strategy, using DIC/HOBt and/or HBTU as coupling reagents and 2-chlorotrityl chloride resin as the solid support. The carrier linked synthetic peptides were injected into rabbits and elicited an anti-peptide response. These anti-hexapeptide antibodies were found to recognize the corresponding peptides and proteins.     

Evaluation of acid‐labile S‐protecting groups to prevent Cys racemization in Fmoc solid‐phase peptide synthesis

Phosphonium and uronium salt‐based reagents enable efficient and effective coupling reactions and are indispensable in peptide chemistry, especially in machine‐assisted SPPS. However, after the activating and coupling steps with these reagents in the presence of tertiary amines, Fmoc derivatives of Cys are known to be considerably racemized during their incorporation. To avoid this side reaction, a coupling method mediated by phosphonium/uronium reagents with a weaker base, such as 2,4,6‐trimethylpyridine, than the ordinarily used DIEA or that by carbodiimide has been recommended. However, these methods are appreciably inferior to the standard protocol applied for SPPS, that is, a 1 min preactivation procedure of coupling with phosphonium or uronium reagents/DIEA in DMF, in terms of coupling efficiency, and also the former method cannot reduce racemization of Cys(Trt) to an acceptable level (<1.0%) even when the preactivation procedure is omitted. Here, the 4,4′‐dimethoxydiphenylmethyl and 4‐methoxybenzyloxymethyl groups were demonstrated to be acid‐labile S‐protecting groups that can suppress racemization of Cys to an acceptable level (<1.0%) when the respective Fmoc derivatives are incorporated via the standard SPPS protocol of phosphonium or uronium reagents with the aid of DIEA in DMF. Furthermore, these protecting groups significantly reduced the rate of racemization compared to the Trt group even in the case of microwave‐assisted SPPS performed at a high temperature. © 2013 The Authors. European Peptide Society published by John Wiley & Sons, Ltd.     

Making Ends Meet: Microwave-Accelerated Synthesis of Cyclic and Disulfide Rich Proteins Via In Situ Thioesterification and Native Chemical Ligation

The development of synthetic methodologies for cyclic peptides is driven by the discovery of cyclic peptide drug scaffolds such as the plant-derived cyclotides, sunflower trypsin inhibitor 1 (SFTI-1) and the development of cyclized conotoxins. Currently, the native chemical ligation reaction between an N-terminal cysteine and C-terminal thioester group remains the most robust method to obtain a head-to-tail cyclized peptide. Peptidyl thioesters are effectively generated by Boc SPPS. However, their generation is challenging using Fmoc SPPS because thioester linkers are not stable to repeated piperidine exposure during deprotection. Herein we describe a Fmoc-based protocol for synthesizing cyclic peptides adapted for microwave assisted solid phase peptide synthesis. The protocol relies on the linker Di-Fmoc-3,4-diaminobenzoic acid, and we demonstrate the use of Gly, Ser, Arg and Ile as C-terminal amino acids (using HBTU and HATU as coupling reagents). Following synthesis, an N-acylurea moiety is generated at the C-terminal of the peptide; the resin bound acylurea peptide is then deprotected and cleaved from the resin. The fully deprotected peptide undergoes thiolysis in aqueous buffer, generating the thioester in situ. Ultimately, the head-to-tail cyclized peptide is obtained via native chemical ligation. Two naturally occurring cyclic peptides, the prototypical Möbius cyclotide kalata B1 and SFTI-1 were synthesized efficiently, avoiding potential branching at the diamino linker, using the optimized protocol. In addition, we demonstrate the possibility to use the approach for the synthesis of long and synthetically challenging linear sequences, by the ligation of two truncated fragments of a 50-residue long plant defensin.     

Solid-phase peptide synthesis: from standard procedures to the synthesis of difficult sequences

This protocol for solid-phase peptide synthesis (SPPS) is based on the widely used Fmoc/tBu strategy, activation of the carboxyl groups by aminium-derived coupling reagents and use of PEG-modified polystyrene resins. A standard protocol is described, which was successfully applied in our lab for the synthesis of the corticotropin-releasing factor (CRF), >400 CRF analogs and a countless number of other peptides. The 41-mer peptide CRF is obtained within approximately 80 working hours. To achieve the so-called difficult sequences, special techniques have to be applied in order to reduce aggregation of the growing peptide chain, which is the main cause of failure for peptide chemosynthesis. Exemplary application of depsipeptide and pseudoproline units is shown for synthesizing an extremely difficult sequence, the Asn(15) analog of the WW domain FBP28, which is impossible to obtain using the standard protocol.     

BOP‐OXy,BOP‐OBt,and BOP‐OAt: novel organophosphinic coupling reagents useful for solution and solid‐phase peptide synthesis

Stand‐alone coupling reagents derived from bis(2‐oxo‐3‐oxazolidinyl)phosphorodiamidic chloride show efficient performance in solution and SPPS. In particular, the Oxyma Pure (Luxembourg Biotech., Tel Aviv, Israel) derivative shows the additional advantage of being highly soluble in DMF and even fairly soluble in CH₃CN, which can extend its use for the synthesis of complex peptides. These new stand‐alone coupling reagents have the advantage of not bearing any counteranion such as PF₆ or BH₄, whose presence can jeopardize the purification of final peptides prepared in solution. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Benzyloxy Derivatives of Triazine-based Coupling Reagents Designed for an Efficient Solid Phase Peptide Synthesis on Polystyrene Resin

Coupling reagents resembling the structure of Merrifield resin were designed and prepared from 2-chloro-4,6-dibenzyloxy-1,3,5-triazine and the different tertiary bases N-methylmorpholine, N-methylpiperidine, and DABCO. As previously observed for DMTMM, the appropriate N-(4,6-dibenzyloxy-1,3,5-triazin-2-yl) ammonium chloride salts were not suitable as efficient coupling reagents because of their low stability. On the other hand, the stability of the N-(4,6-dibenzyloxy-1,3,5-triazin-2-yl) ammonium tetrafluoroborates was suitable enough for prolonged storage and convenient application in SPPS. Moreover, we observed that the superactive intermediates formed during activation of Fmoc–Aib–OH with 4,6-dibenzyloxy-1,3,5-triazine-based coupling reagents lead to an increase in its concentration inside the polystyrene resin. Therefore, we hypothesize that this increase can enhance efficiency of 4,6-dibenzyloxy-1,3,5-triazine-based coupling reagents in SPPS.     

p‐Methoxyphenol: A potent and effective scavenger for solid‐phase peptide synthesis

During the final step of t‐Boc/Bzl, solid‐phase peptide synthesis (SPPS)‐protecting groups from amino acids (aa) side chains must be removed from the target peptides during cleavage from the solid support . These reaction steps involve hydrolysis with hydrogen fluoride (HF) in the presence of a nucleophile (scavenger), whose function is to trap the carbocations produced during S_N1‐type reactions. Five peptide sequences were synthesised for evaluating p‐methoxyphenol effectiveness as a potent scavenger. After the synthesis, the resin–peptide was then separated into two equal parts to be cleaved using two scavengers: conventional reactive p‐cresol (reported in the literature as an effective acyl ion eliminator) and p‐methoxyphenol (hypothesised as fulfilling the same functions as the routinely used scavenger). Detailed analysis of the electrostatic potential map (EPM) revealed similarities between these two nucleophiles, regarding net atomic charge, electron density distribution, and similar pKa values. Good scavenger efficacy was observed by chromatography and mass spectrometry results for the synthesised molecules, which revealed that p‐methoxyphenol can be used as a potent scavenger during SPPS by t‐Boc/Bzl strategy, as similar results were obtained using the conventional scavenger.     

Coupling of iminodiacetic acid with amino acid derivatives in solution and solid phase

Summary The IR studies for the preactivation step of N-protected iminodiacetic acid with different coupling reagents (TCFH, TFFH, HATU, HBTU, HSTU) were reported here and showed the formation of an anhydride as an active intermediate in case of TCFH and TFFH. The formation of a mixture of an anhydride and an active ester (-OBt,-OAt or-OSu) were observed for HBTU, HATU or HSTU coupling reagent. Dependent on the coupling conditions, acylation of N-protected iminodiacetic acid with amino acid ester or amide derivatives in solution phase gave monoor di-substituted iminodiacetic acid derivatives. Coupling of N-protected iminodiacetic acid with an amino acid or peptide attached to a solid support (PAL-PEG-PS or Wang resin) gave only the monosubstituted iminodiacetic acid derivatives. Abbreviations: HBTU, N-[(1H-benzotriazol-1-yl)(dimethylamino)methylene]-N-methylmethanaminium hexafluorophosphate N-oxide; Boc,t-butyloxycarbonyl; DCC, N,N′-dicyclohexylcarbodiimide; DIC, N,N′-diisopropylcarbodiimide; DIEA, diisopropylethylamine; HATU, N-[(dimethylamino)-1H-1,2,3,-triazolo[4,5-b]pyridin-1-yl-methylene]-N-methylmethanaminium hexafluorophosphate N-oxide; DMF, N,N-dimethylformamide; Bsmoc, 1,1-dioxobenzo[b]thiophene-2-ylmethoxycarbonyl; Fmoc, 9-fluorenylmethyloxycarbonyl; HOAt, l-hydroxy-7-azabenzotriazole; HOBt, l-hydroxybenzotriazol; IDA, iminodiacetic acid; HSTU, O-(succinimidyl)-tetramethyluronium hexafluorophosphate; TCFH; 1,1,3,3-tetramethyl-2-chloroformamidinium hexafluorophosphate; TFFH, 1,1,3,3-tetramethyl-2-fluoroformamidinium hexafluorophosphate; TMS-Cl, trimethylchlorosilane. Amino acids and peptides are abbreviated and designated following the rules of the IUPAC-IUB Commission of Biochemical Nomenclature (J. Biol. Chem., 247 (1972) 997).