Copper complexes of some tetradentate pyrazolyl amines

Four tetradentate nitrogen donor ligands have been prepared by condensation of N-hydroxymethylpyrazoles with ethylenediamines. These ligands are varied by methylation of the pyrazole rings (edbd) or the aminonitrogens (debp), or both (debd). Copper(II) complexes of the type CuL(ClO₄)₂ have been isolated with L = debp, edbp, edbd. For L = debd, the adducts salts Cu(debd)(dMp)X₂, with X = ClO₄⁻, BF₄⁻ and dMp = 3,5-dimethylpyrazole, were obtained. The compounds were characterized by their absorption (d-d) and EPR spectra. All four undergo quasi-reversible electrochemical reduction in methanol, the redox potentials being correlated with the degree of ligand methylation. The copper(I) forms are relatively unstable, and also bind carbon monoxide with different affinities.     

Metal chelates of heterocyclic nitrogen-containing ketones. XIV. Metal ion,anion and substituent effects on the enolization of mono-keto compounds

A number of new complexes of iron(II), cobakt(II), nickel(II), copper(II) and palladium(II) containing 2-picolyl-p-nitrophenyl- or 2-picolyl-p-tolyl ketone, L and L′, respectively, and various anions (Cl^?, Br^?, NSC^?, BF₄^? or ClO₄^?) have been synthesized and characterized by elemental analyses, magnetic susceptibility, ESR, IR and reflectance spectral measurements. The stereochemistry and the nature of the complexes are markedly dependent upon the molar of the reactants, the anions and the ligand substituents. In all complexes the ligands are cheated to the metal ion via the pryridine nitrogen and the carbonyl oxygen atoms, whereby in the case of [ML₂]X₂, M = iron(II) and [ML₃]X₂, M = cobalt(II) or nickel(II) and X = ClO₄^? or BF₄^?, the 2-picolyl-p-nitrophenyl ketone exists in its enol form which is only deprotonated in the presence of palladium(II). The ligand field parameters (Dq, B′, λ and β) are calculated and related to the electronic environment and the basicity of the ligands.     

Coordination chemistry of higher oxidation states. Part 15. Cobalt(III) complexes of bi- and multi-dentate phenylphosphines

Six-coordinate cobalt(III) complex trans-[Co{o-C₆H₄(PPh₂)₂}₂X₂]ClO₄, fac-[Co{PhP(CH₂CH₂PPh₂)₂}X₃],cis-[Co{P(CH₂CH₂PPh₂)₃}X₂]ClO₄ and cis-β-[Co{-CH₂P(Ph)CH₂CH₂PPh₂}₂X₂]PF₆ (X = Cl, Br) have been prepared by halogen oxidation of the Co(II) analogues, and characterised by IR, electronic and ³¹P NMR spectroscopy. The failure to obtain complexes with X = I, and with some related ligands is discussed, and the rather low stability of the above complexes is rationalised in terms of steric crowding at the metal centre.     

Synthesis and reactivity of perchlorate bis(tetrahydrothiophen)gold(I). 197Au Mössbauer spectra of three-coordinate gold(I) complexes

The displacement of tetrahydrothiophen (tht) in [Au(tht)₂]ClO₄ by neutral ligands gives bi-, tri- or tetra-coordinated complexes of the type [Au- (py)₂]ClO₄, [(tht)AuPPh₂NHPPh₂Au(tht)] (ClO₄)₂, [LAu(LL)]ClO₄ (L=tht, PPh₃; LL=bipy, phen) or [AuL₄]ClO₄ (L=PPh₃, AsPh₃ or SbPh₃). The reaction between [Au(tht)₂]ClO₄ and (Bu₄N)[AuR₂] (R=C₆F₅, C₆Cl₅, C₆F₃H₂) yields RAu(tht). The ¹⁹⁷Au Mössbauer spectrum of [LAu(LL)]ClO₄ establishes it as a tri-coordinated species, albeit with an asymmetrically linked bidentate ligand.     

Mono-, bi- and trinuclear bis(diphenylarsino)methane gold complexes. Crystal and molecular structure of [{(C6F5)3Au(Ph2AsCH2AsPh2)}2Ag(OClO3)]dd]Dedicated to Professor Rafael Usón on his 60th birthday.

Addition of bis(diphenylarsino)methane (dpam) to neutral or cationic gold(l) or gold(III) complexes containing weakly coordinating ligands leads to the formation of mononuclear {R₃Au(dpam), R₂ClAu(dpam), [R₂Au(dpam)]ClO₄ (RC₆F₅)} or binuclear complexes {RAu(dpam)AuR, [Au₂(dpam)₂](ClO₄)₂}. Mixed gold(III)gold(I) compounds can be synthesized either by oxidation of the gold(I) complexes or from mononuclear gold(III) derivatives. Reaction of R₃Au(dpam)with ClAu(tht), [Au(tht)₂]ClO₄ or AgClO₄ leads to the trinuclear complexes [{R₃Au(dpam)}₂Au]X (X=[AuCl₂] or ClO₄) or [{R₃Au(dpam)}₂Ag(OClO₃)], respectively. The structure of the silver complex has been determined by X-ray crystallography.     

Synthesis of new cationic rhodium(I) complexes with diolefins and isoquinoline N-oxide as ligands

The preparation of cationic rhodium complexes of the types [RhL(IQNO)₂]ClO₄ (L  COD, COT and NBD) and [Rh(COD)(IQNO)L′]ClO₄ (L′ = 4-NH₂py, 4-NMe₂py and PPh₃) and the reactions of [Rh(COD)(IQNO)₂]ClO₄ with N- and P-donor ligands are described.     

Coordination chemistry of higher oxidation states. Part 21. Platinum-195 NMR studies of platinum(II) and platinum(IV) complexes of bi- and multi-dentate phosphorus,arsenic and sulphur ligands

195-Platinum NMR spectra are reported for a series of complexes of bidentate ligands [Pt(LL)X₄] (X=Cl, Br; LL=diphosphine, diarsine, dithioether, diselenoether), [Pt(Me₂PCH₂CH₂PMe₂)₂X₂]X₂, [Pt(o-C₆H₄(AsMe₂)₂)₂X₂]X₂, and for the Pt(II) analogues. The trends in chemical shifts δ(Pt) and ¹J(PtP), ¹J(PtSe) coupling constants are discussed, and used to establish the nature of the solution species obtained by oxidation of Pt(II) complexes of some multidentate phosphorus and arsenic ligands. The [Pt(LL)I₄] materials are shown to exist as [Pt^II(LL)I₂] in dimethylsulphoxide solution, but [Pt(o-C₆H₄(AsMe₂)₂)₂I₂]²⁺ is a genuine Pt(IV) iodo-complex.     

Synthesis and reactivity of binuclear halo-bridge palladium(II) isocyanide complexes

An equimolecular mixture of [Pd(RNC)₂Cl₂] (R = Ph, p-Me C₆H₄) and [Pd(MeCN)₂Cl₂] reacts in boiling, 1,2-dichloroethane to give the binuclear complexes [Pd(RNC)Cl₂]₂.These compounds undergo a variety of bridge-splitting reactions with neutral or anionic ligands yielding complexes of the type cis and trans [Pd(RNC)LX₂] or [Pd(RNC)X₃]⁻ (L = PPh₃, pyridine, C₆H₁₁NC; X = CL, Br).By reaction of [Pd(PhNC)Cl₃]⁻ with MeOH the anionic carbene complex [Pd{C(NHPh)OMe}Cl₃]⁻ is obtained.[Pd(PhNC)Cl₂]₂ reacts with p-toluidine (excess) or o-aminopyridine to give the corresponding mononuclear carbene derivatives.In the case of the mixed derivative [Pd(p-MeC₆H₄NC)(C₆H₁₁NC)Cl₂], only the more activated p-tolylisocyanide was found to react with p-toluidine.The complexes have been characterized by elemental analysis, conductivity measurements, i.r. and ¹H n.m.r. spectra where possible.     

Octahedral nickel(II) hexamethyleneimine-dithiocarbamato complexes involving bidentate N,N-donor ligands

The nickel(II) complexes of the compositions [Ni(hmidtc)(bpy)₂]ClO₄ (I), [Ni(hmidtc)(phen)₂]ClO₄ (II), [Ni(hmidtc)(phen)₂]SCN (III), [Ni(hmidtc)(phen)₂]PF₆ (IV), [Ni(hmidtc)(phen)₂]BPh₄ (V), [Ni(hmidtc)(phen)₂]AcO·2H₂O (VI) and [Ni(hmidtc)(phen)₂]Br·H₂O (VII), involving a combination of one hexamethyleneimine-dithiocarbamate anion (hmidtc) and two bidentate N,N-donor ligands (2,2′-bipyridine (bpy) for I or 1,10-phenanthroline (phen) for II-VII), have been prepared. The compounds were characterized by elemental analysis, molar conductivity measurements, UV-Vis and IR spectroscopy, magnetochemical measurements and thermal analysis. A single-crystal X-ray analysis of the complex I revealed a distorted octahedral geometry with the nickel(II) ion coordinated by four nitrogen atoms (from two bidentate-coordinated bpy molecules) and two sulfur atoms (from one bidentate-coordinated hmidtc anion), together giving an NiN₄S₂ donor set.     

Synthesis of (NBu4)2[Pd2(μ-Br)2(C6X5)2Br2] (X=F,Cl), new and more versatile precursors of pentahalophenyl derivatives of palladium(II)

The title compounds (1, X=F; 2, X=Cl) were obtained in quantitative yield by refluxing together (NBu₄)₂[Pd₂(μ-Br)₂(C₆X₅)₄] and (NBu₄)₂[Pd₂(μ-Br)₂Br₄]. Treatment of 1 or 2 with AgClO₄ (Pd:Ag= 1:1) gave solutions which behaved as containing ‘Pd(C₆X₅)Br’. 1, 2 and the ‘Pd(C₆X₅)Br’ solutions were checked as precursors of mono-pentahalophenyl derivatives, yielding a variety of complexes [Pd(C₆X₅)Br(L-L)] (L-L=bipy, tmen, dpe, COD), [Pd(C₆X₅)BrL₂] (L=p-TolNH₂, py, PPh₃, AsPh₃, SbPh₃), [Pd₂(μ-Br)₂(C₆X₅)₂L₂] (X=F, L=AsPh₃; X=Cl, L=SbPh₃) and (NBu₄)[Pd(C₆X₅)Br₂L] (X=F, L= py, AsPh₃, SbPh₃; X=Cl, L=p-TolNH₂, py, PPh₃, AsPh₃, SbPh₃). The solutions of ‘Pd(C₆X₅)Br’ proved to be the best general precursors of complexes [Pd(C₆X₅)BrL₂] although complexes with OPPh₃ could not be obtained.     

Influence of the counter anion and solvent in the structure of copper derivatives with the 2,3-bis(2-pyridyl)pyrazine ligand

Several compounds have been isolated from the reaction between different copper bis(acetylacetonato) derivatives and the potentially bridging ligand 2,3-bis(2-pyridyl)pyrazine (bppz). A compound of formula [Cu(tfacac)₂(bppz)] (1) is obtained when the substituted trifluoromethylacetylacetonato is used. The use of different anions and the unsubstituted acetylacetonato give rise to new derivatives of general formula [{Cu(acac)}₂(μ-bppz)₂]X₂ (X⁻ = BF₄⁻, 2; PF₆⁻, 3; BPh₄⁻, 4). In these compounds the bppz ligand is acting as a bridge by chelating one copper atom and bonding monodentate a second copper atom. The presence of anions with different coordination abilities introduces variations in the copper environment and geometry. When the non-coordinating tetraphenylborate is used different compounds depending on the nature of the solvent are obtained. The dimer 4 was isolated from a methanol/chloroform mixture, while in the absence of chloroform the monomeric compound of formula [Cu(acac)(bppz)(ROH)](BPh₄)·ROH (ROH = MeOH, 5) was obtained. When ethanol was used instead of methanol the analogous derivative 6 (R = EtOH) was isolated. Both species show a mononuclear structure with the copper atom five-coordinated by the chelating acac and bppz ligands and one hydroxo group occupying the apical position. A similar environment for the copper appears in [Cu(tfacac)(bppz)(MeOH)](BPh₄), 7, which shows a dimeric structure through hydrogen bonds interactions. The magnetic susceptibility data of the dimeric compounds show very weak antiferromagnetic interactions between the copper atoms, an expected fact since the bridging bppz ligand is not planar but the monodentate pyridine is more or less perpendicular to the other two aromatic rings, precluding the spin exchange via the π ligand electrons.     

Synthesis and solvatochromism studies of new mixed-chelate dinuclear copper(II) complexes with different counter ions

Four new symmetric mixed-chelate dinuclear complexes type [Cu₂(L)₂(TAE)]X₂, where TAE = tetraacetylethane; L = N,N-dimethyl-N′-benzylethylenediamine (L¹) or N,N′-dibenylethylenediamine (L²); X = ClO₄ or BPh₄ have been synthesized and characterized on the bases of elemental analysis, spectroscopic and conductance measurements. The X-ray crystal analysis of [Cu₂(L¹)₂(TAE)](ClO₄)₂ demonstrated that the two copper(II) ions are not equivalent. The axial position of the first copper is occupied by a ClO₄⁻ ion with a square pyramidal geometry whereas; the second copper ion resides in an octahedral environment determined by two perchlorate anions. However, in solution, the perchlorate ions are driven out by solvent molecules leading to their solvatochromism. The solvatochromism of the complexes were investigated in various organic solvents and also were compared with those of the corresponding mononuclear complexes [Cu(L)(acac)]ClO₄. Their solvatochromism were also investigated with different solvent parameters models using stepwise multiple linear regression (SMLR) method. The results suggested that the DN parameter of the solvent has the dominate contribution to the shift of the d-d absorption band of the complexes. The results demonstrated that the complexes with counter ions of BPh₄ are more solvatochromic in very weak donor solvents owing to their disinclination in ion-pair formation.     

2-methyl- and 2-ethylamino-3-pieoline N-oxide complexes formed from various copper(II) salts

Copper(II) complexes with 2-methylamino-3-picoline N-oxide (3MMH) and 2-ethylamino-3-picoline N- oxide (3MEH) have been prepared from the following salts: tetrafluoroborate, nitrate, chloride, bromide and acetate. Solids of the general formula [Cu(LH)₄]- (X₂) (where LH = either ligand when X = BF₄^tau; and LH = 3MMH when X = NO₃^tau; ); [Cu(3MEH)₂- (ONO₂)₂]; [Cu(LH)X₂] (where LH = either ligand and X = Cl^tau; , Br^tau; ) and CuL₂ (where L = either ligand's conjugate base) were characterized using spectral methods (i.e., IR, UV-Vis and ESR). Both coordinate as monodentate ligands via their N-oxide oxygen in their complexes with salts having polyatomic anions. They bond as neutral bidentate ligands in their halide complexes, but as anionic bidentate ligands in the complexes formed from copper(II) acetate. The bonding to Cu(II) ccnters via the N-oxide oxygen is the strongest tor these two ligands based on spectral data than any of the 2-aminopyridine N-oxides or 2- aminopicoline N-oxides studied to date.     

Manganese (III) cyclam complexes with aqua, iodo, nitrito, perchlorato and acetic acid/acetato axial ligands

The syntheses, structures and magnetic properties of five new manganese (III) cyclam complexes, trans-[Mn(cyclam)(OH₂)₂](CF₃SO₃)₃ · H₂O, trans-[Mn(cyclam)I₂]I, trans-[Mn(cyclam)(ONO)₂]ClO₄, trans-[Mn(cyclam)(OClO₃)₂]ClO₄ and trans-[Mn(cyclam)(CH₃COO)(CH₃COOH)](ClO₄)₂, are reported. Cyclam is the tetradentate amine ligand 1,4,8,11-tetraazacyclotetradecane. The complexes all exhibit pronounced tetragonal elongation of the coordination octahedron with the four cyclam nitrogens occupying the four equatorial positions. The magnetic properties are consistent with the formulation of the complexes as high-spin d⁴ systems. trans-[Mn(cyclam)(OH₂)₂](CF₃SO₃)₃ · H₂O is shown to be a convenient starting material for the syntheses of trans cyclam complexes. [Mn(cyclam)(CH₃COO)(CH₃COOH)](ClO₄)₂ exhibits extremely short intermolecular hydrogen bonds resulting in a pseudo-chain structure. The tilt of the axial ligands with respect to the equatorial plane containing the manganese and the cyclam nitrogen atoms is discussed.     

1,4-Di(1,2,3,4-tetrazol-2-yl)butane as a precursor of new 2D and 3D coordination polymers of Cu(II)

A series of new coordination polymers of Cu(II) have been prepared in a reaction between copper(II) perchlorate or tetrafluoroborate salt and a novel ligand 1,4-di(1,2,3,4-tetrazol-2-yl)butane (bbtz). The compounds were characterised by an elemental analysis, TG measurements, IR, EPR and UV-Vis spectroscopy. Crystal structures of bbtz and five complexes of Cu(II) were determined by a single crystal X-ray diffraction measurement performed at 100 K. The composition and architecture of the obtained complexes strongly depend on the reaction conditions especially on the kind of solvent. Investigated complexes are composed of polymeric macrocations and non-coordinated anions. In all cases the bbtz molecules act as the bidentate ligand coordinated to metal(II) ions via N4, N4^′ nitrogen atoms from tetrazole rings. The complexes {[Cu(bbtz)₂(MeOH)₂]X₂}_∞ (X=ClO₄⁻, BF₄⁻) crystallise from methanol as 2D coordination polymers. In these compounds central metal ions are coplanar linked by molecules of bbtz and a coordination sphere is completed by axially coordinated solvent molecules. The complexes {[Cu(bbtz)₃]X₂}_∞ (X=ClO₄⁻, BF₄⁻) were synthesised in EtOH/H₂O solvent system and posses a common network topology. In this group of complexes each central atom is linked by ligand molecules to six other in plane arranged central atoms resulting in 2D networks. Reactions between Cu(II) salts and bbtz performed in absolute ethanol resulted in the formation of the next type of product. In {[Cu(bbtz)₃](ClO₄)₂·2EtOH}_∞ neighboured copper(II) ions are linked by ligand molecules in the three directions what leads to the formation of 3D net. A crystal of this complex is composed of two mutually interpenetrated 3D networks.     

Preparation of benzophenone imine complexes of transition metals

Benzophenone imine [M(η¹-NHCPh₂)(CO)_nP_5-n]BPh₄ [M = Mn, Re; n = 2, 3; P = P(OEt)₃, PPh(OEt)₂, PPh₂OEt, PPh₃] complexes were prepared by allowing triflate M(κ¹-OTf)(CO)_nP_5-n compounds to react with an excess of the imine. Hydride-imine [MH(η¹-NHCPh₂)P₄]BPh₄ (M = Ru, Os), triflate-imine [Os(κ¹-OTf)(η¹-NHCPh₂)P₄]BPh₄ and bis(imine) [Ru(η¹-NHCPh₂)₂P₄](BPh₄)₂ [P = P(OEt)₃] derivatives were also prepared. The complexes were characterized spectroscopically (IR, ¹H, ³¹P, ¹³C NMR) and a geometry in solution was also established. Hydride-benzophenone imine [IrHCl(η¹-NHCPh₂)L(PPh₃)₂]BPh₄and [IrHCl(η¹-NHCPh₂)L(AsPh₃)₂]BPh₄ [L = P(OEt)₃ and PPh(OEt)₂] complexes were prepared by reacting hydride IrHCl₂L(PPh₃)₂ and IrHCl₂L(AsPh₃)₂ precursors with an excess of imine. Dihydride IrH₂(η¹-NHCPh₂)(PPh₃)₃ complex was also obtained and a geometry in solution was proposed.     

Generation of trans-dioxoruthenium(VI) porphyrins: A photochemical approach

trans-Dioxoruthenium(VI) porphyrin complexes have been developed as one of the best-characterized model systems for heme-containing enzymes. Traditionally, this type of compounds can be prepared by oxidation of ruthenium(II) precursors with peroxyacids and other terminal oxidants under different conditions, depending on the porphyrin ligands. In this work, a new photochemical generation of trans-dioxoruthenium(VI) porphyrins has been developed by extension of the known photo-induced ligand cleavage reactions. Refluxing ruthenium(II) carbonyl porphyrins [Ru^II(Por)(CO)] in carbon tetrachloride afforded dichlororuthenium(IV) complexes [Ru^IV(Por)Cl₂]. Facile exchange of the counterions in [Ru^IV(Por)Cl₂] with Ag(ClO₃) or Ag(BrO₃) gave the corresponding dichlorate [Ru^IV(Por)(ClO₃)₂] or dibromate [Ru^IV(Por)(BrO₃)₂] salts. Visible-light photolysis of the photo-labile porphyrin-ruthenium(IV) dichlorates or dibromates resulted in homolytic cleavage of the two O-Cl or O-Br bonds in the axial ligands to produce trans-dioxoruthenium(IV) species [Ru^VI(Por)O₂] bearing different porphyrin ligands.     

Tertiary phosphines containing ortho-carborane as backbone. Some palladium(II) complexes

Coordination compounds of the type Pd(HPC)₂- X₂, Pd(DPC)X₂ and Pd(NPC)X₂, where X  Cl or Br and HPC = 1-diphenylphosphino-o-carborane; DPC = 1,2-bis(diphenylphoshino)-_o-carborane; and NPC= 1-bis(dimethylamminophosphino, 2-diphenylphosphino) -o-carborane, have been prepared and characterized by IR, Raman and electronic spectroscopy, magnetic and conductivity measurements, and elemental analyses. The compounds containing the monodentate HPC ligand possess a trans-planar structure, whereas for those containing the bidentate DPC and NPC ligands a cis-planar configuration was found. In all cases, the phosphorus atoms of the tertiary phosphine (HPC) and the ditertiary phosphines (DPC and NPC) are bonded to the palladium atom. The complex [Pd(HPC)Cl₂]₂ has also been prepared, and a halogen bridge dimeric structure is proposed on the basis of the IR and Raman spectra.     

Metallic perchlorate salts of N-isopropyl-and N-Cyclohexyl-2-pyrrolidinone

A series of metal perclorate complexes of N- isopropyl-2-pyrrolidinone (NIPP) and N-cyclohexyl- 2-pyrrolidinone (NCHP) have been synthesized, showing coordination through the carbonyl oxygen atom. These complexes have compositions with the general formulas [M(NIPP)_{4 or 6}]²⁺(ClO₄)₂ and [M(NCHP)₆]²⁺(ClO₄)₂ [M = Mn(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II)]. They have been characterized by IR spectra, electrical conductivity measurements, magnetic moments, X-ray diffraction patterns and electronic absorption spectra.     

Stabilization of Mn(II) and Mn(III) in mononuclear complexes derived from tridentate ligands with N2O donors: Synthesis, crystal structure, superoxide dismutase activity and DNA interaction studies

A new family of tridentate ligands PhimpH (2-((2-phenyl-2-(pyridin-2-yl)hydazono)methyl)phenol), N-PhimpH (2-((2-phenyl-2-(pyridin-2-yl)hydrazono)methyl)napthalen-1-ol), Me-PhimpH (2-(1-(2-phenyl-2-(pyridine-2-yl)hydrazono)ethyl)phenol) have been synthesized and characterized. The ligands PhimpH and N-PhimpH after deprotonation react with manganese(II) and manganese(III) starting materials affording [Mn(Phimp)₂] (1), [Mn(Phimp)₂](ClO₄) (2), [Mn(N-Phimp)₂] (3), [Mn(N-Phimp)₂](ClO₄) (4). Complexes [Mn(Phimp)₂] (1) and [Mn(N-Phimp)₂] (3) convert to [Mn(Phimp)₂]⁺ (cation of 2) and [Mn(N-Phimp)₂]⁺ (cation of 4) respectively upon oxidation. Ligand Me-PhimpH stabilized only manganese(III) centre resulting [Mn(Me-Phimp)₂](ClO₄) (5). The molecular structures of [Mn(Phimp)₂], 1 and [Mn(Phimp)₂](ClO₄), 2 were determined by single crystal X-ray diffraction. X-ray crystal structures of 1 and 2 have revealed the presence of distorted octahedral MnN₄O₂ coordination sphere having meridionally spanning ligands. Electrochemical studies for the complexes showed Mn(II)/Mn(III), (E_1/2 = 0.14-0.40 V) and Mn(III)/Mn(IV), (E_1/2 = 0.80-1.06 V) couples vs. Ag/AgCl. The redox properties were exploited to examine superoxide dismutase (SOD) activity using Mn(II)/Mn(III) couple. The complexes 1, 2, 4 and 5 have been revealed to catalyze effectively the dismutation of superoxide () in xanthine-xanthine oxidase-nitro blue tetrazolium assay and IC₅₀ values were found to be 0.29, 0.39, 1.12 and 0.76 μM respectively. DNA interaction studies with complex 2 showed binding of DNA in a non-intercalative pathway. Complexes 1, 2 and 4 exhibited nuclease activity in presence of H₂O₂ and inhibition of activity was noted in presence of KI.