Detection of spatial correlations in protein structures and molecular complexes

Protein structures are frequently related by spectacular and often surprising similarities. Structural correlations among protein chains are routinely detected by various structure-matching techniques, but the comparison of oligomers and molecular complexes is largely uncharted territory. Here we solve the structure-matching problem for oligomers and large molecular aggregates, including the largest molecular complexes known today. We provide several challenging examples that cannot be handled by conventional structure-matching techniques and we report on a number of remarkable correlations. The examples cover the cell-puncturing device of bacteriophage T4, the secretion system of P. aeruginosa, members of the dehydrogenase family, DNA clamps, ferredoxin iron-storage cages, and virus capsids.     

Built-in mechanical stress in viral shells

Mechanical properties of biological molecular aggregates are essential to their function. A remarkable example are double-stranded DNA viruses such as the φ29 bacteriophage, that not only has to withstand pressures of tens of atmospheres exerted by the confined DNA, but also uses this stored elastic energy during DNA translocation into the host. Here we show that empty prolated φ29 bacteriophage proheads exhibit an intriguing anisotropic stiffness which behaves counterintuitively different from standard continuum elasticity predictions. By using atomic force microscopy, we find that the φ29 shells are approximately two-times stiffer along the short than along the long axis. This result can be attributed to the existence of a residual stress, a hypothesis that we confirm by coarse-grained simulations. This built-in stress of the virus prohead could be a strategy to provide extra mechanical strength to withstand the DNA compaction during and after packing and a variety of extracellular conditions, such as osmotic shocks or dehydration.     

Ternary complex consisting of DNA, polycation, and a natural polysaccharide of schizophyllan to induce cellular uptake by antigen presenting cells

A natural polysaccharide called schizophyllan (SPG) can form a complex with polynucleotides, and the complex has been shown to deliver biofunctional short DNAs such as antisense DNAs and CpG-DNAs. Although it is a novel and efficient method, there is a drawback: attachment of homo-polynucleotide tails [for example, poly(dA) or poly(C)] to the end of DNA is necessary to stabilize the complex, because DNA heterosequences cannot bind to SPG. The aim of this paper is to present an alternative method in which SPG/DNA complexes can be made without using the tails. The basic strategy is as follows: since SPG can form hydrophobic domains in aqueous solutions, hydrophobic objects should be encapsulated by this domain. DNA alone is highly hydrophilic; however, once DNA/polycation complexes are made, they should be included by the SPG hydrophobic domain. The aim of this paper is to prove the formation of the polycation/DNA/SPG ternary complex. Gel electrophoresis showed that presence of SPG influenced the migration pattern of polycation+DNA mixtures. With increasing the SPG ratio, the zeta potential (zeta) of the polycation+DNA+SPG mixture decreased drastically to reach almost zeta = 0 and the particle size distributions were altered due to the ternary complex formation. Confocal laser scanning microscopy revealed that the polycation/DNA/SPG ternary complexes showed high uptake efficiency when the complexes were exposed to macrophage-like cells (J774.A1). IL-12 secretion was enhanced when CpG-DNA was added as the ternary complex. These features can be ascribed to the fact that J774.A1 has a SPG recognition site called Dectin-1 on the cellular surface and the ternary complex can be ingested by this pathway.     

Characterization of the DNA binding activity of stable RecA-DNA complexes. Interaction between the two DNA binding sites within RecA helical filaments

The DNA-binding, annealing and recombinational activities of purified RecA-DNA complexes stabilized by ATP gamma S (a slowly hydrolysable analog of ATP) are described. Electrophoretic analysis, DNase protection experiments and observations by electron microscopy suggest that saturated RecA complexes formed with single- or double-stranded DNA are able to accommodate an additional single strand of DNA with a stoichiometry of about one nucleotide of added single-stranded DNA per nucleotide or base-pair, respectively, of DNA resident in the complex. This strand uptake is independent of complementarity or homology between the added and resident DNA molecules. In the complex, the incoming and resident single-stranded DNA molecules are in close proximity as the two strands can anneal in case of their complementarity. Stable RecA complexes formed with single-stranded DNA bind double-stranded DNA efficiently when the added DNA is homologous to the complexed strand and then initiate a strand exchange reaction between the partner DNA molecules. Electron microscopy of the RecA-single-stranded DNA complexes associated with homologous double-stranded DNA suggests that a portion of duplex DNA is taken into the complex and placed in register with the resident single strand. Our experiments indicate that both DNA binding sites within RecA helical filaments can be occupied by either single- or double-stranded DNA. Presumably, the same first DNA binding site is used by RecA during its polymerization on single- or double-stranded DNA and the second DNA binding site becomes available for subsequent interaction of the protein-saturated complexes with naked DNA. The way by which additional DNA is taken into RecA-DNA complexes shows co-operative character and this helps to explain how topological problems are avoided during RecA-mediated homologous recombination.     

Interaction between bacteriophage PM2 protein IV and DNA.

The interaction between DNA and the structural protein IV of bacteriophage PM2 was studied by co-sedimentation, filter binding and electron microscopy. The co-sedimentation data and the sigmoid-shaped filter binding curve were interpreted in terms of co-operative binding. At a given DNA/protein input ratio, some DNA molecules were associated with a large amount of protein IV while others had no detectable protein bound to them. Electron microscopic examination of DNA-protein IV mixtures showed highly condensed DNA molecules alongside uncomplexed native DNA. Dissociation experiments revealed the presence of two types of complexes. Type I dissociated rapidly while type II had a long half-life. Dissociation of complexes obtained with increasing protein/DNA ratios suggested that the type I complex was a precursor of type II complex. Protein IV binds equally well to superhelical, relaxed or linear DNA as well as to single-stranded DNA. These observations lead to a model for the interaction and for the consequent alterations in the DNA structure.     

Mechanochemistry of a Viral DNA Packaging Motor

The pentameric ATPase motor gp16 packages double-stranded DNA into the bacteriophage ?29 virus capsid. On the basis of the results of single-molecule experimental studies, we propose a push and roll mechanism to explain how the packaging motor translocates the DNA in bursts of four 2.5 bp power strokes, while rotating the DNA. In this mechanism, each power stroke accompanies P_i release after ATP hydrolysis. Since the high-resolution structure of the gp16 motor is not available, we borrowed characterized features from the P4 RNA packaging motor in bacteriophage ?12. For each power stroke, a lumenal lever from a single subunit is electrostatically steered to the DNA backbone. The lever then pushes sterically, orthogonal to the backbone axis, such that the right-handed DNA helix is translocated and rotated in a left-handed direction. The electrostatic association allows tight coupling between the lever and the DNA and prevents DNA from slipping back. The lever affinity for DNA decreases towards the end of the power stroke and the DNA rolls to the lever on the next subunit. Each power stroke facilitates ATP hydrolysis in the next catalytic site by inserting an Arg -finger into the site, as captured in ?12-P4. At the end of every four power strokes, ADP release happens slowly, so the cycle pauses constituting a dwell phase during which four ATPs are loaded into the catalytic sites. The next burst phase of four power strokes starts once spontaneous ATP hydrolysis takes place in the fifth site without insertion of an Arg finger. The push and roll model provides a new perspective on how a multimeric ATPase transports DNA, and it might apply to other ring motors as well.     

Studies on the arrangement of DNA inside viruses using a breakable bis-psoralen crosslinker

We have developed a new DNA-DNA crosslinking strategy based on a cleavable bispsoralen reagent and used this strategy to study the structures of bacteriophage lambda and the animal virus SV40. Our results show that in both lambda and SV40, all restriction fragments examined can be crosslinked to all other restriction fragments. In bacteriophage lambda, the crosslinking data are consistent with a random packaging model, while in SV40 there is some deviation from the random model. These results imply that the structures of DNA inside these viruses are either highly disordered or very complex.     

Differential binding of RNA polymerase to the pRM and pR promoters of bacteriophage lambda

Escherichia coli RNA polymerase binding to the promoters pR and pRM of bacteriophage lambda was visualized and quantitated by electron microscopy. Although the two promoters are located close together in the phage genome, their proximity to the end of an 889-bp HaeIII DNA fragment made it possible to position binary complexes within 18 bp (2%) intervals. Thus, polymerase binding to pR and pRM could be distinguished by comparing the locations of binary complexes formed with wild-type and mutant (prm-) DNA at 37 degrees and 15 degrees C. We found that at 37 degrees C, RNA polymerase bound primarily to pR, while at 15 degrees C the efficiency of binding was the same at pRM as at pR. In addition, at 15 degrees C the overall efficiency of binding was significantly reduced relative to that at 37 degrees C. When the enzyme was incubated with prm- DNA, binding to pRM was reduced at both temperatures, as expected. Reduced binding to pRM was accompanied by an increase in binding to pR, apparently as a consequence of the low enzyme-to-DNA ratios used in these experiments.     

Injection of DNA into liposomes by bacteriophage lambda

Small unilamellar vesicles (75-100 nm diameter) and large liposomes (greater than 1 micron in diameter) were prepared containing the lamB protein, an outer membrane protein of Escherichia coli and Shigella which serves as the receptor for bacteriophage lambda. Bacteriophage were observed to bind to these liposomes and vesicles by their tails and in most cases the heads of the bound bacteriophage appeared empty or partially empty of DNA. The lambda DNA was usually only partially ejected from the bacteriophage head when small unilamellar liposomes were used, presumably because the vesicles are too small to contain all the DNA. The partially ejected DNA was not susceptible to DNase unless the vesicle bilayer was first disrupted suggesting that DNA injection of phage DNA into the vesicle had occurred. After disruption of these vesicles on electron microscope grids, the bacteriophage are seen to have partially empty heads and a small mass of DNA associated with their tails. Using larger liposomes prepared by the fusion of lamB bearing vesicles with polyethylene glycol and n-hexyl bromide, the heads of most of the bound bacteriophage appeared to be completely empty of DNA. Disruption of these preparations on electron microscope grids revealed circular arrays of empty-headed bacteriophage surrounding DNA which had apparently been contained within the intact liposomes. These results indicate that high molecular weight DNA can be entrapped within liposomes with high efficiency by ejection from bacteriophage lambda. The possible use of these DNA-containing liposomes to facilitate gene transfer in eukaryotic cells is discussed.     

Probing DNA polymerase-DNA interactions: examining the template strand in exonuclease complexes using 2-aminopurine fluorescence and acrylamide quenching

The bacteriophage T4 DNA polymerase forms fluorescent complexes with DNA substrates labeled with 2-aminopurine (2AP) in the template strand; the fluorescence intensity depends on the position of 2AP. When preexonuclease complexes are formed, complexes at the crossroads between polymerase and exonuclease complexes, 2AP in the +1 position in the template strand is fully free of contacts with the adjacent bases as indicated by high fluorescence intensity and a long fluorescence lifetime of about 10.9 ns. Fluorescence intensity decreases for 2AP in the template strand when the primer end is transferred to the exonuclease active center to form exonuclease complexes, which indicates a change in DNA conformation; 2AP can now interact with adjacent bases, which quenches fluorescence emission. Some polymerase-induced base unstacking for 2AP in the template strand in exonuclease complexes is observed but is restricted primarily to the n and +1 positions, which indicates that the DNA polymerase holds the template strand in a way that forces base unstacking only in a small region near the primer terminus. A hold on the template strand will help to maintain the correct alignment of the template and primer strands during proofreading. Acrylamide quenches 2AP fluorescence in preexonuclease and in exonuclease complexes formed with DNA labeled with 2AP in the template strand, which indicates that the template strand remains accessible to solvent in both complexes. These studies provide new information about the conformation of the template strand in exonuclease complexes that is not available from structural studies.     

A small (58-nm) attached sphere perturbs the sieving of 40-80-kilobase DNA in 0.2-2.5% agarose gels: analysis of bacteriophage T7 capsid-DNA complexes by use of pulsed field electrophoresis.

Although the icosahedral bacteriophage T7 capsid has a diameter (58 nm) that is 234-fold smaller than the length of the linear, double-stranded T7 DNA, binding of a T7 capsid to T7 DNA is found here to have dramatic effects on the migration of the DNA during both pulsed field agarose gel electrophoresis (PFGE; the field inversion mode is used) and constant field agarose gel electrophoresis (CFGE). For these studies, capsid-DNA complexes were obtained by expelling DNA from mature bacteriophage T7; this procedure yields DNA with capsids bound at a variable position on the DNA. When subjected to CFGE at 2-6 V/cm in 0.20-2.5% agarose gels, capsid-DNA complexes arrest at the electrophoretic origin. Progressively lowering the electrical potential gradient to 0.5 V/cm results in migration; most complexes form a single band. The elevated electrical potential gradient (3 V/cm) induced arrest of capsid-DNA complexes is reversed when PFGE is used instead of CFGE. For some conditions of PFGE, the mobility of capsid-DNA complexes is a function of the position of the capsid on the DNA. During either CFGE (0.5 V/cm) or PFGE, capsid-DNA complexes increasingly separate from capsid-free DNA as the percentage of agarose increases. During these studies, capsid-DNA complexes are identified by electron microscopy of enzymatically-digested pieces of agarose gel; this is apparently the first successful electron microscopy of DNA from an agarose gel.(ABSTRACT TRUNCATED AT 250 WORDS)     

A Novel Method for Generating Nested Deletions Using the in Vitro Bacteriophage T3 DNA Packaging System

To sequence a DNA segment inserted into a cosmid vector underthe directed sequencing strategy, we established a simple andrapid method for generating nested deletions which uses thein vitro packaging system of bacteriophage T3 DNA. The principleis based on the previous finding that this system can translocateany linear double-stranded DNA up to 40 kb into the phage capsidin a time-dependent manner and the encapsulated DNA becomesDNase-resistant. For this purpose, we constructed a cosmid vectorthat carries two different antibiotic selection markers at bothsides of the multiple cloning site, and after insertion of aDNA segment, the clone was linearized by -terminase at the cossite. After the packaging reaction in vitro followed by DNasetreatment, the encapsulated DNA was introduced into Escherichiacoli cells to give clones with unidirectional deletions by differentialantibiotic selection. Restriction and sequence analyses of deletionclones demonstrated that an ordered set of clones with nesteddeletions, ranging from less than 1 kb to 25 kb, was createdfrom either the end of the DNA segment. Thus, nested deletionclones that cover the entire region of a 40-kb cosmid insertcan be obtained by a single packaging reaction, and its restrictionmap can be simultaneously obtained.     

The UL6 gene product forms the portal for entry of DNA into the herpes simplex virus capsid

During replication of herpes simplex virus type 1 (HSV-1), viral DNA is synthesized in the infected cell nucleus, where DNA-free capsids are also assembled. Genome-length DNA molecules are then cut out of a larger, multigenome concatemer and packaged into capsids. Here we report the results of experiments carried out to test the idea that the HSV-1 UL6 gene product (pUL6) forms the portal through which viral DNA passes as it enters the capsid. Since DNA must enter at a unique site, immunoelectron microscopy experiments were undertaken to determine the location of pUL6. After specific immunogold staining of HSV-1 B capsids, pUL6 was found, by its attached gold label, at one of the 12 capsid vertices. Label was not observed at multiple vertices, at nonvertex sites, or in capsids lacking pUL6. In immunoblot experiments, the pUL6 copy number in purified B capsids was found to be 14.8 +/- 2.6. Biochemical experiments to isolate pUL6 were carried out, beginning with insect cells infected with a recombinant baculovirus expressing the UL6 gene. After purification, pUL6 was found in the form of rings, which were observed in electron micrographs to have outside and inside diameters of 16.4 +/- 1.1 and 5.0 +/- 0.7 nm, respectively, and a height of 19.5 +/- 1.9 nm. The particle weights of individual rings as determined by scanning transmission electron microscopy showed a majority population with a mass corresponding to an oligomeric state of 12. The results are interpreted to support the view that pUL6 forms the DNA entry portal, since it exists at a unique site in the capsid and forms a channel through which DNA can pass. The HSV-1 portal is the first identified in a virus infecting a eukaryote. In its dimensions and oligomeric state, the pUL6 portal resembles the connector or portal complexes employed for DNA encapsidation in double-stranded DNA bacteriophages such as phi29, T4, and P22. This similarity supports the proposed evolutionary relationship between herpesviruses and double-stranded DNA phages and suggests the basic mechanism of DNA packaging is conserved.     

Interaction with nucleic acids and stimulation of the viral DNA polymerase by the herpes simplex virus type 1 major DNA-binding protein

The interaction of the herpes simplex virus type 1 (HSV-1) major DNA-binding protein, infected-cell polypeptide 8 (ICP8), with nucleic acids has been examined by a filter-binding assay and electron microscopy. Filter-binding assays done over a broad pH range indicated that the optimum pH for the protein-DNA interaction is approximately 7.6. Heat inactivation studies showed that ICP8 is stable at temperatures up to 40 degrees C with a rapid loss of binding activity on incubation at 45 degrees C and above. Competition binding experiments have established the following relative affinities of ICP8 for the following nucleic acids: single-stranded HSV-1 DNA congruent to bacteriophage fd DNA greater than polyriboadenylate much greater than double-stranded HSV-1 DNA congruent to d(pCpT)5. Observation of negatively stained ICP8-single-stranded DNA complexes indicated that ICP8 binds along the length of the DNA in a regular repeating fashion. The average width of these complexes is 9.3 +/- 0.8 nms. Finally. Finally, addition of purified ICP8 to HSV-1 DNA polymerase reactions resulted in a stimulation of the viral polymerase activity.     

Structure calculations for single-stranded DNA complexed with the single-stranded DNA binding protein GP32 of bacteriophage T4: a remarkable DNA structure

In this study it is established by calculation which regular conformations single-stranded DNA and RNA can adopt in the complex with the single-stranded DNA binding protein GP32 of bacteriophage T4. In order to do so, information from previous experiments about base orientations and the length and diameter of the complexes is used together with knowledge about bond lengths and valence angles between chemical bonds. It turns out that there is only a limited set of similar conformations which are in agreement with experimental data. The arrangement of neighboring bases is such that there is ample space for aromatic residues of the protein to partly intercalate between the bases, which is in agreement with a previously proposed model for the binding domain of the protein [Prigodich, R. V., Shamoo, Y., Williams, K. R., Chase, J. W., Konigsberg, W. H., & Coleman, J. E. (1986) Biochemistry 25, 3666-3671]. Both C2'endo and C3'endo sugar conformations lead to calculated DNA conformations that are consistent with experimental data. The orientation of the O2' atoms of the sugars in RNA can explain why the binding affinity of GP32 for polyribonucleotides is lower than for polydeoxyribonucleotides.     

Site-specific recombination by the bacteriophage P1 lox-Cre system. Cre-mediated synapsis of two lox sites

The bacteriophage P1-encoded recombinase Cre forms a simple DNA-protein complex at the specific recognition site loxP. Furthermore, Cre is able to mediate a synaptic union of two loxP sites. When two loxP sites are on the same linear DNA molecule, Cre binds the two sites together to form a circular protein-DNA complex. These complexes can be resolved into a linear DNA molecule and a closed circular DNA molecule, the end products of site-specific recombination.     

A complex of single-strand binding protein and M13 DNA as hybridization probe.

Single-stranded DNA was complexed to the single-strand binding protein (SSB) of Escherichia coli in a mass ratio of 30:1. The protein moiety of this complex can be labelled by a number of methods of which we have chosen radio-iodination and biotinylation as examples. The SSB-M13 DNA complexes, labelled to high specific activities, were used as probes in hybridization experiments in which 1.6 X 10(-18) moles of immobilized target DNA were detected. The stability of the hybrids was not severely decreased by the binding of SSB. Analysis of hybrids by electron microscopy showed that complexing of DNA with SSB could be used to allow its subsequent identification in the hybrids.