Protein desalting by isoelectric focusing in a segmented immobilized pH gradient

We have recently described an apparatus for protein purification based on a segmented Immobiline gel, having one or more liquid interlayers in between. The principle is entirely new, as it is based on keeping the protein of interest isoelectric, in a flow chamber, and focusing the impurities in an Immobiline gel. For this, a hydraulic flow is coupled orthogonally to an electric flow, sweeping away the non-isoelectric impurities from the recycling chamber. We now demonstrate that the present apparatus can be efficiently used for protein desalting. Hemoglobin A samples, containing 50 mM NaCl or 50 mM ammonium acetate, could be efficiently desalted in 2 h of recycling, after which the total salt content had decreased to less than 0.005 mM (a salt decrement of more than 10,000 fold the initial input). However, with polyprotic buffers (sulphate, citrate, phosphate, oligoamines) the desalting process was much slower, typically of the order of 20 h, possibly due to interaction of these species with the surrounding Immobiline matrix. In this last case, outside pH control (e.g. with a pH-stat) is necessary during protein purification, as, due to the faster removal of the monovalent counterion, the solution in the recycling chamber can become rather acidic or alkaline. It is demonstrated that the 2 extremities of the Immobiline segments facing the sample recycling chamber act indeed as isoelectric membranes, having a good buffering capacity, preventing the protein macroion from leaving the chamber by continuously titrating it to its isoelectric point.     

Generation of a pH gradient in an immobilized enzyme system

Several examples of two-step sequential reactions exist where, because of the poor equilibrium conversion by the first reaction, it is desirable to conduct the two reactions simultaneously. In such a scheme, the product of the first reaction is continuously removed by the second reaction, thus not allowing the first reaction to approach chemical equilibrium. Therefore, the first reaction is allowed to proceed in the desired direction at an appreciable rate. However, in many biochemical applications where enzyme catalysts are involved, the enzyme's activities are strong functions of pH. Where the pH optima of the first and second reaction differ by three to four units, the above reaction scheme would be difficult to implement. In these cases, the two reactions can be separated by a thin permeable membrane across which the desired pH gradient is maintained. In this article, it was shown, both by theory and experiment, that a thin, flat membrane of immobilized urease can accomplish this goal when one face of the membrane is exposed to the acidic bulk solution (pH(b) = 4.5) containing a small quantity of urea (0.01 M). In this particular case, the ammonia that was produced in the membrane consumed the incoming hydrogen ions and thus maintained the desired pH gradient. Experimental results indicate that with sufficient urease loading, the face of the membrane opposite to the bulk solution could be maintained at a pH that would allow many enzymes to realize their maximum activities ( approximately 7.5). It was also found that this pH gradient could be maintained even in the presence of a buffer, which greatly enhances the transport of protons into the membrane. (c) 1993 John Wiley & Sons, Inc.     

Soft immobilized pH gradient gels in proteome analysis: a follow-up

As a follow-up of a previous work on two-dimensional map analysis utilizing soft (< 4%T) immobilized pH gradient (IPG) matrices in the first dimension (Candiano et al., Electrophoresis 2002, 23, 292-297), we have further optimized the preparation of such dilute IPG gels. One important step for obtaining an even reswelling of the entire IPG strip along the pH 3-10 interval is a washing step in 100 mM citric acid. It appears as though after rinsing off the excess acid in distilled water, a gradient of this tricarboxylic acid remains trapped into the IPG matrix, from almost nil at the acidic gel region to substantially higher amounts in its basic counterpart. This gradient helps in obtaining a uniform reswelling of the IPG strip, since carboxyl groups are more heavily hydrated than amino groups. The combined effects of uniform reswelling and of diluting the gel matrix favor penetration of large macromolecules (> 200 kDa) and allow for better spot resolution and for the display of a substantially higher number of spots also in the 30-60 000 Da region. A delipidation step in tri-n-butylphosphate:acetone:methanol (1:12:1) appears to substantially improve spot focusing and greatly diminish streaking and smearing of spots in all regions of the pH gradient.     

Two-dimensional maps in the most extended (pH 2.5-11) immobilized pH gradient interval

In conventional isoelectric focusing in soluble, amphoteric buffers, it has been quite difficult to produce two-dimensional (2-D) separations in pH intervals greater than pH 4-8. In general more alkaline proteins were analyzed by non-equilibrium IEF in the first dimension. Even with the advent of immobilized pH gradients (IPG), separations could be extended to pH gradients not wider than pH 3-10, due to a lack of suitable buffers. Since more acidic and more alkaline acrylamido buffers have recently been synthesized, we have been able to optimize what is believed to be the widest possible immobilized pH gradient, a pH 2.5-11 span. We report here for the first time 2-D separations of total tissue lysates in such extended pH 2.5-11 gradients. It appears that, with the IPG technique, close to 100% of all possible cell products can be displayed in a single 2-D map.     

Predicting extreme pKa shifts in staphylococcal nuclease mutants with constant pH molecular dynamics

Accurate computational methods of determining protein and nucleic acid pK(a) values are vital to understanding pH-dependent processes in biological systems. In this article, we use the recently developed method constant pH molecular dynamics (CPHMD) to explore the calculation of highly perturbed pK(a) values in variants of staphylococcal nuclease (SNase). Simulations were performed using the replica exchange (REX) protocol for improved conformational sampling with eight temperature windows, and yielded converged proton populations in a total sampling time of 4 ns. Our REX-CPHMD simulations resulted in calculated pK(a) values with an average unsigned error (AUE) of 0.75 pK units for the acidic residues in Δ + PHS, a hyperstable variant of SNase. For highly pK(a)-perturbed SNase mutants with known crystal structures, our calculations yielded an AUE of 1.5 pK units and for those mutants based on modeled structures an AUE of 1.4 pK units was found. Although a systematic underestimate of pK shifts was observed in most of the cases for the highly perturbed pK mutants, correlations between conformational rearrangement and plasticity associated with the mutation and error in pK(a) prediction was not evident in the data. This study further extends the scope of electrostatic environments explored using the REX-CPHMD methodology and suggests that it is a reliable tool for rapidly characterizing ionizable amino acids within proteins even when modeled structures are employed.     

A horizontal apparatus for isoelectric protein purification in a segmented immobilized pH gradient

A modification of the previously described apparatus (Faupel et al. (1987) J. Biochem. Biophys. Methods 15, 147-162), for recycling isoelectric focusing in a segmented immobilized pH gradient, is here reported. The most important improvements are: (1) a horizontal, vs. the previously vertical assembly; (2) a reduction of the thickness of the central flow chamber to 6 mm, vs. the previous 3 cm length and (3) the introduction, at both gel extremities of each Immobiline segment, of polypropylene filters, thus efficiently blocking the gel in situ. The advantages are: (i) the spontaneous removal of air bubbles, which in the vertical apparatus tend to accumulate in the ceiling of the flow chamber and to obstruct the flow of electric current; (ii) a more efficient hydraulic flow with a reduced chance of heating the liquid stream in the flow chamber, due to its reduced length along the separation path and (iii) a reduced risk of gel detachment from the tube walls, due to osmotic swelling caused by focused protein zones in the gel phase and by the fixed Immobiline charges in the polyacrylamide matrix.     

Organic disulfides as a means to generate streak-free two-dimensional maps with narrow range basic immobilized pH gradient strips as first dimension

Streaking is a severe problem when narrow range basic immobilized pH gradient strips are used as the first dimension of two-dimensional (2-D) electrophoresis. It is demonstrated that this cysteinyl related streaking is eliminated when focusing is done in the presence of hydroxyethyl disulfide (DeStreak). Use of DeStreak also results in 2-D maps with simplified spot patterns and improved reproducibility.     

Using pulse field gradient NMR diffusion measurements to define molecular size distributions in glycan preparations

Glycans comprise perhaps the largest biomass in nature, and more and more glycans are used in a number of applications, including those as pharmaceutical agents in the clinic. However, defining glycan molecular weight distributions during and after their preparation is not always straightforward. Here, we use pulse field gradient (PFG) ¹H NMR self-diffusion measurements to assess molecular weight distributions in various glycan preparations. Initially, we derived diffusion coefficients, D, on a series of dextrans with reported weight-average molecular weights from about 5 kDa to 150 kDa. For each dextran sample, we analyzed 15 diffusion decay curves, one from each of the 15 major ¹H resonance envelopes, to provide diffusion coefficients. By measuring D as a function of dextran concentration, we determined D at infinite dilution, D_inf, which allowed estimation of the hydrodynamic radius, R_h, using the Stokes-Einstein relationship. A plot of log D_inf versus log R_h was linear and provided a standard calibration curve from which R_h is estimated for other glycans. We then applied this methodology to investigate two other glycans, an α-(1→2)-l-rhamnosyl-α-(1→4)-d-galacturonosyl with quasi-randomly distributed, mostly terminal β(1→4)-linked galactose side-chains (GRG) and an α(1→6)-d-galacto-β(1→4)-d-mannan (Davanat), which is presently being tested against cancer in the clinic. Using the dextran-derived calibration curve, we find that average R_h values for GRG and Davanat are 76 ± 6 × 10⁻¹⁰ m and 56 ± 3 × 10⁻¹⁰ m, with GRG being more polydispersed than Davanat. Results from this study will be useful to investigators requiring knowledge of polysaccharide dispersity, needing to study polysaccharides under various solution conditions, or wanting to follow degradation of polysaccharides during production.     

Isoelectric protein purification by orthogonally coupled hydraulic and electric transports in a segmented immobilized pH gradient

A new method is described for preparative protein purification, based on isoelectric focusing on immobilized pH gradients. The principle is entirely new, as it is based on keeping the protein of interest isoelectric, in a flow-chamber, and focusing the impurities in the Immobiline gel. For this, a hydraulic flow is coupled orthogonally to an electric flow, sweeping away the non-isoelectric impurities from the recycling chamber. The sample flow-chamber is built in the centre of the apparatus, and is coupled to an upper and lower segment of an immobilized pH gradient. The protein to be purified is kept isoelectric in the flow-chamber and prevented from leaving it by arranging for the extremities of the immobilized pH gradient, forming the ceiling and the floor of this chamber, to have isoelectric points just higher (e.g. +0.05 pH units, on the cathodic side) and just lower (e.g. -0.05 pH units, on the anodic side) than the known pI of the species of interest. Macromolecules and small ions leave the flow chamber at a rate corresponding to a first order reaction kinetics (the plot of log C vs. time being linear). In general, for macromolecules, 12 h of recycling under current allow removal of 95% impurities. After 24 h of recycling, the protein of interest is more than 99.5% pure. The recoveries are very high (approaching 100%) as the sample under purification never enters the Immobiline gel and thus does not have to be extracted from a hydrophilic matrix, as typical of preparative gel electrophoresis.     

The molecular size required varies according to the reaction step round the sodium pump cycle

Progress along the path of the sodium pump cycle requires a stepwise recruitment of additional subunits for maximal activity. These results show that whereas a particle the size of the alpha beta protomer presents Na+,K+-ATPase activity at 10 microM ATP, an additional subunit, perhaps a second alpha-chain, is required to obtain the much greater Na+,K+-ATPase activity resulting from the occupation of low-affinity ATP sites at physiological ATP concentrations. A non-phosphorylating ATP analogue, however, will modestly stimulate the Na+,K+-ATPase activity acting at an alternative low-affinity site or step on the alpha beta protomer.     

Protein staining and pH gradient determination on the same gel in isoelectric focusing.

The apparent isoelectric point of a component focused on polyacrylamide gels is normally estimated by extrapolating a pH gradient determined on one gel to another gel which has been stained for protein in order to locate the position of the component (1). The pH gradient is determined by slicing the gel transversely and reading the pH of the eluate after soaking the segments for 1–2 hr in a small amount of degassed water. It is assumed that the gradients in both gels are identical. Alternatively, an antimony microelectrode has been used to measure pH gradients directly in unsectioned gels (2). Similar techniques have been applied to polyacrylamide gel slabs and are reviewed by Vesterberg (3). Righetti and Drysdale (4) have recently reviewed these and other aspects of isoelectric focusing in gels.I report here a very precise method for the determination of a protein “isoelectric point” that can be accomplished with a single gel. The technique is demonstrated with yeast phosphoglycerate kinase and the very low density lipoprotein (VLDL) fraction from human plasma.     

Polymorphism of alpha-1-antitrypsin (Pi) in the Swiss population determined by isoelectric focusing with an immobilized pH gradient

The distribution of the phenotypes of alpha-1-antitrypsin (Pi) was investigated in a Swiss population sample of 1,148 unrelated individuals using isoelectric focusing with a immobilized pH gradient. A short focusing period of only 2 h using high-voltage is an additional asset of this modified method. All common as well as the rarer phenotypes were reliably detected. However, detection of Pi M4 required a narrower pH range as chosen for routine work. The allele frequencies found were: PiM1:0.7121; PiM2:0.1381; PiM3:0.0976; PiS:0.0383; PiZ:0.0113; PiVar(I, N, V.Vdon):0.0026.     

High-resolution two-dimensional electrophoresis with isoelectric focusing in immobilized pH gradients

Due to the high reproducibility of pH gradient slope and width, immobilized pH gradients (IPG) have been used as the first dimension of two-dimensional techniques in order to generate maps of constant spot position in the $\text{p}\text{M}{}_{\mathrm{<mtext>r</mtext>}}$. However, when coupling IPG to SDS (sodium dodecyl sulphate) gels two problems were encountered: vertical streaking, due to incomplete zone solubilization in SDS, and horizontal streaking, due to spot fusion along the pH axis caused by the electroendosmosis of the charged Immobiline gels. Two methodical modifications are herewith described to overcome these drawbacks: (a) the SDS equilibrium time of the first-dimension gel has been prolonged to at least 30 min; (b) the SDS electrophoresis gel has been cast together with a starting gel, containing 2.5 mM of each Immobiline species used in the first dimension, which serves as a transition from the charged to the uncharged gel.     

A comparison of immobilized pH gradient isoelectric focusing and strong-cation-exchange chromatography as a first dimension in shotgun proteomics

Recently, we have developed a high-resolution two-dimensional separation strategy for the analysis of complex peptide mixtures. This methodology employs isoelectric focusing of peptides on immobilized pH gradient (IPG) gels in the first dimension, followed by reversed-phase chromatography in the second dimension, and subsequent tandem mass spectrometry analysis. The traditional approach to this mixture problem employs strong-cation-exchange (SCX) chromatography in the first dimension. Here, we present a direct comparison of these two first-dimensional techniques using complex protein samples derived from the testis of Rattus norvegicus. It was found that the use of immobilized pH gradients (narrow range pH 3.5-4.5) for peptide separation in the first dimension yielded 13% more protein identifications than the optimized off-line SCX approach (employing the entire pI range of the sample). In addition, the IPG technique allows for a much more efficient use on mass spectrometer analysis time. Separation of a tryptic digest derived from a rat testis sample on a narrow range pH gradient (over the 3.5-4.5 pH range) yielded 7626 and 2750 peptides and proteins, respectively. Peptide and protein identification was performed with high confidence using SEQUEST in combination with a data filtering program employing pI and statistical based functions to remove false-positives from the data.     

SMART amplification combined with cDNA size fractionation in order to obtain large full-length clones

Background  

cDNA libraries are widely used to identify genes and splice variants, and as a physical resource for full-length clones. Conventionally-generated cDNA libraries contain a high percentage of 5'-truncated clones. Current library construction methods that enrich for full-length mRNA are laborious, and involve several enzymatic steps performed on mRNA, which renders them sensitive to RNA degradation. The SMART technique for full-length enrichment is robust but results in limited cDNA insert size of the library.     

Protein binding by agarose carrying hydrophobic groups in conjunction with charges

The binding of a series of proteins to agarose (Sepharose 4B) substituted with n-alkylamines of varying C-chain length (C₁, C₄ or C₈) has been investigated. At pH 8 and 0.05 ionic strength the negatively charged proteins (chymotrypsinogen X, serum albumin, ovalbumin and β-lactoglobulin), in constrast to the positively charged species (chymotrypsinogen A, α-chymotrypsin, and lysozyme) had strong affinity for the adsorbents with the longer C-chains (C₄, C₈). The binding appears to depend on cooperation between hydrophobic and electrostatic forces, the latter involving positive charges on the adsorbent which are introduced by the substitution process.